Copolymerization of styrene and norbornene with β‐diketiminato nickel/methylaluminoxane catalytic system

Styrene–norbornene (S‐N) copolymerizations were carried out using β‐diketiminato nickel complexes CH{C(CF₃)NAr}₂NiBr (Ar = 2,6‐ⁱPr₂C₆H₃, 1 ; Ar = 2,6‐Me₂C₆H₃, 2 ) in the presence of methylaluminoxane. The influence of the comonomer feed content and polymerization temperature on the conversion and composition of the copolymers with the catalytic system was investigated. An increase in the feed ratio of S/N led to an increase in the incorporated styrene content of the resulting copolymer. NMR characterization of the copolymers generated with the catalytic systems showed that the random S‐N copolymers are produced. Differential scanning calorimetric determination of the copolymers shows higher T_g values than polystyrene, and gel permeation chromatographic measurements have shown that the copolymers possess rather narrow molecular weight distributions, suggesting that the copolymerization take place at a single active site. Copyright © 2012 John Wiley & Sons, Ltd.     

Vinyl polymerization of norbornene catalyzed by a new bis(β‐ketoamino)nickel(II) complex–methylaluminoxane system

A new β‐ketoimine ligand was prepared through traditional condensation of 2‐acetylcyclohexanone with 1‐naphthylamine. Consequently, the new moisture‐ and air‐stable bis(β‐ketoamino)nickel(II) complex Ni[2‐CH₃C(O)C₆H₈(NAr)]₂ (Ar = naphthyl) was synthesized and characterized. The solid‐state structures of the ligand and complex have been determined by single‐crystal X‐ray diffraction. Additionally, the new complex is a highly active catalyst precursor for polymerization of norbornene in combination with methylaluminoxane. Copyright © 2005 John Wiley & Sons, Ltd.     

Monoaryloxo ytterbium(III) chlorides supported by β‐diketiminato ligands as novel initiators for the living ring‐opening polymerization of ε‐caprolactone

Ring‐opening polymerization of ε‐caprolactone (ε‐CL) was carried out using β‐diketiminato‐supported monoaryloxo ytterbium chlorides L¹Yb(OAr)Cl(THF) (1) [L¹ = N,N′‐bis(2,6‐dimethylphenyl)‐2,4‐pentanediiminato, OAr = 2,6‐di‐tert‐butylphenoxo‐], and L²Yb(OAr′)Cl(THF) (2) [L² = N,N′‐bis(2,6‐diisopropylphenyl)‐2,4‐pentanediiminato, OAr′ = 2,6‐di‐tert‐butyl‐4‐methylphenoxo‐], respectively, as single‐component initiator. The influence of reaction conditions, such as polymerization temperature, polymerization time, initiator, and initiator concentration, on the monomer conversion, molecular weight, and molecular weight distribution of the resulting polymers was investigated. Complex 1 was well characterized and its crystal structure was determined. Some features and kinetic behaviors of the CL polymerization initiated by these two complexes were studied. The polymerization rate is first order with respect to monomer. The M_n of the polymer increases linearly with the increase of the polymer yield, while polydispersity remained narrow and unchanged throughout the polymerization in a broad range of temperatures from 0 to 50 °C. The results indicated that the present system has a “living character”. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1147–1152, 2006     

Homo‐ and copolymerization of ethylene and norbornene with bis(β‐diketiminato) titanium complexes activated with methylaluminoxane

Homo‐ and copolymerization of ethylene and norbornene were investigated with bis(β‐diketiminato) titanium complexes [ArNC(CR₃)CHC(CR₃)NAr]₂TiCl₂ (R = F, Ar = 2,6‐diisopropylphenyl 2a; R = F, Ar = 2,6‐dimethylphenyl 2b ; R = H, Ar = 2,6‐diisopropylphenyl 2c ; R = H, Ar = 2,6‐dimethylphenyl 2d) in the presence of methylaluminoxane (MAO). The influence of steric and electric effects of complexes on catalytic activity was evaluated. With MAO as cocatalyst, complexes 2a–d are moderately active catalysts for ethylene polymerization producing high‐molecular weight polyethylenes bearing linear structures, but low active catalysts for norbornene polymerization. Moreover, 2a – d are also active ethylene–norbornene (E–N) copolymerization catalysts. The incorporation of norbornene in the E–N copolymer could be controlled by varying the charged norbornene. ¹³C NMR analyses showed the microstructures of the E–N copolymers were predominantly alternated and isolated norbornene units in copolymer, dyad, and triad sequences of norbornene were detected in the E–N copolymers with high incorporated content of norbornene. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 93–101, 2008     

Palladium‐catalyzed carbonylative cyclization of β‐bromo‐α,β‐unsaturated carboxylic acids with primary amines leading to N‐alkylmaleimides

Cyclic β‐bromo‐α,β‐unsaturated carboxylic acids are carbonylatively cyclized with primary amines under carbon monoxide pressure in MeCN in the presence of a catalytic amount of PdCl₂(PPh₃)₂ to give N‐alkylmaleimides. Copyright © 2012 John Wiley & Sons, Ltd.     

Ligand‐free CuI‐catalyzed coupling and cyclization of β‐bromo‐α,β‐unsaturated amides with formamide leading to pyrimidinones

β‐Bromo‐α,β‐unsaturated amides were coupled and cyclized with formamide in DMF at 100°C in the presence of a catalytic amount of a copper(I) salt along with a base to give the corresponding pyrimidinones in good yields. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of long‐chain‐branched polyethylene by ethylene homopolymerization with a novel nickel(II) α‐diimine catalyst

Long‐chain‐branched polyethylene with a broad or bimodal molecular weight distribution was synthesized by ethylene homopolymerization via a novel nickel(II) α‐diimine complex of 2,3‐bis(2‐phenylphenyl)butane diimine nickel dibromide ({[2‐C₆H₄(C₆H₅)]? N?C? (CH₃)C(CH₃)?N? [2‐C₆H₄(C₆H₅)]}NiBr₂) that possessed two stereoisomers in the presence of modified methylaluminoxane. The influences of the polymerization conditions, including the temperature and Al/Ni molar ratio, on the catalytic activity, molecular weight and molecular weight distribution, degree of branching, and branch length of polyethylene, were investigated. The resultant products were confirmed by gel permeation chromatography, gas chromatography/mass spectrometry, and ¹³C NMR characterization to be composed of higher molecular weight polyethylene with only isolated long‐branched chains (longer than six carbons) or with methyl pendant groups and oligomers of linear α‐olefins. The long‐chain‐branched polyethylene was formed mainly through the copolymerization of ethylene growing chains and macromonomers of α‐olefins. The presence of methyl pendant groups in the polyethylene main chain implied a 2,1‐insertion of the macromonomers into [Ni]? H active species. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1325–1330, 2005     

Synthesis of β‐Haloketones by β‐Addition Reactions of α,β‐Unsaturated Ketones with BX3 (X = Br,Cl) as Halide Source

A series of β‐bromoketones and β‐chloroketones were synthesized by the addition reactions of α,β‐unsaturated ketones under BX₃ (X = Br, Cl) and ethylene glycol reaction system. The α,β‐unsaturated ester also was successfully converted to its corresponding β‐bromoester under the reaction condition.     

Palladium‐catalyzed cyclization of β‐bromo‐α,β‐unsaturated ketones with arylhydrazines leading to 3‐substituted 1‐aryl‐1 H‐pyrazoles

β‐Bromo‐α,β‐unsaturated ketones are condensed with arylhydrazines to form hydrazones, which are in situ intramolecularly cyclized into 3‐substituted 1‐aryl‐1 H‐pyrazoles under a catalytic system of Pd(OAc)₂/1,3‐bis(diphenylhosphino)propane (dppp)/NaO^tBu. Copyright © 2012 John Wiley & Sons, Ltd.     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.     

Palladium‐catalyzed carbonylative cyclization of β‐bromo‐α,β‐unsaturated carboxylic acids with 2,2‐dimethylhydrazine leading to 1‐(dimethylamino)‐1H‐pyrrole‐2,5‐diones

β‐Bromo‐α,β‐unsaturated carboxylic acids are carbonylatively cyclized with 2,2‐dimethylhydrazine under carbon monoxide pressure in THF in the presence of a catalytic amount of a palladium catalyst along with a base to give 1‐(dimethylamino)‐1H‐pyrrole‐2,5‐diones. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of novel branched ethylene/cyclopentene copolymers with only cis‐1,3‐enchained cyclopentene units using α‐diimine nickel(II) complexes in the presence of methylaluminoxane

The copolymerization of ethylene with cyclopentene catalyzed by three α‐diimine nickel(II) complexes in the presence of methylaluminoxane (MAO) was investigated. High‐molecular‐weight branched ethylene/cyclopentene copolymers with only cis‐1,3‐enchained cyclopentene units, which has not been reported previously, were obtained. The catalytic activity, cyclopentene incorporation, copolymer molecular weight, and molecular‐weight distribution could be controlled over a wide range through the variation of the catalyst structure and polymerization conditions, including cyclopentene concentration in the feed and polymerization temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2186–2192, 2008     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

CuI/amino acid‐catalyzed coupling and cyclization of β‐bromo‐α,β‐unsaturated amides with terminal alkynes leading to (3Z)‐3‐alkylidenepyrrol‐1‐ones

β‐Bromo‐α,β‐unsaturated amides are coupled and cyclized with terminal alkynes in DMF at 110 °C in the presence of a catalytic amount of CuI and amino acid along with a base to give the corresponding (3Z)‐3‐alkylidenepyrrol‐1‐ones in moderate to good yields. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597     

Vinyl polymerization of norbornene by nickel(II) complexes bearing β‐diketiminate ligands

Norbornene polymerizations were carried out using nickel(II) bromide complexes CH{C(R)NAr}₂NiBr ( 1 , R = CH₃, Ar = 2, 6 ? ⁱPr₂C₆H₃; 2 , R = CH₃, Ar = 2, 6‐Me₂C₆H₃; 3 , R = CF₃, Ar = 2, 6 ? ⁱPr₂C₆H₃; 4 , R = CF₃, Ar = 2, 6‐Me₂C₆H₃) in the presence of methylaluminoxane. Compound 3 is the most active norbornene polymerization catalyst of all the nickel complexes tested. The activity of theses catalysts increases with increases in steric bulk of the substituents on the aryl rings. The electronic nature of the ligand backbone also affects the activity. The resulting polynorbornenes are vinyl type by IR and NMR analyses. Copyright © 2007 John Wiley & Sons, Ltd.     

NH2SO3H–SiO2 as a new water‐compatible,recyclable heterogeneous catalyst for the synthesis of novel (α,β‐unsaturated) β‐amino ketones via aza‐Michael reaction

NH₂SO₃H–SiO₂/water as a novel catalytic system was used for the synthesis of (α,β‐unsaturated) β‐amino ketones via aza‐Michael reaction at reflux conditions. The methodology was of general applicability and the catalyst exhibited activity up to five cycles. The catalyst was characterized for the first time using FT‐IR, X‐ray diffraction and scanning electron microscopic–energy dispersion analytical X‐ray. The stability of the catalyst was evaluated by differential scanning calorimetry and TGA/differential thermal analysis. High efficiency of the catalyst along with its recycling ability and the rather low loading demonstrated in reactions are the merits of the presented protocol. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and characterization of poly(higher‐α‐olefin)s with a nickel(α‐diimine)/methylaluminoxane catalyst system: Effect of chain running on the polymer properties

Homopolymerization of octadecene‐1 at different reaction conditions has been studied. Significant chain running can be seen at higher polymerization temperatures. Interestingly, insertion of octadecene‐1 into a sterically hindered nickel‐cation/carbon (secondary) bond is observed. The microstructure of the polymer was established using NMR spectroscopy. The effects of chain running on polymer melting, crystallization behavior, and dynamic mechanical thermal properties were studied using DSC and DMTA. The extent of chain running (i.e., 2,ω‐, 1,ω‐enchainments) decreases with an increase in the carbon number of α‐olefins. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 191–210, 2007     

Palladium(II)‐catalyzed cyclization of W‐(2′,4′‐dienyl)‐2‐alkynamides to α‐alkylidene‐γ‐butyrolactams

In the presence of CuCl₂, N‐(2′, 4′‐dienyl)‐2‐alkynamides can be converted to α‐alkylidene‐σ‐butyrolactams under the catalysis of palladium(II). In this reaction, CuCl₂ is used to oxidize Pd(0) to regenerate Pd(II), or the carbon‐palladium bond is quenched by the oxidative cleavage reaction of CuCl₂.