Pd nanoparticles as catalysts for green and sustainable oxidation of functionalized alcohols in aqueous media

The previously described catalyst system for the aerobic oxidation of alcohols, comprising palladium(II) acetate in combination with neocuproine in a 1:1 mixture of water and a water-miscible cosolvent such as ethylene carbonate or dimethylsulfoxide, was shown to involve palladium nanoparticles as the active catalyst. The latter are formed in situ or can be preformed by reduction of the palladium-neocuproine complex with hydrogen and they are stabilized by both the neocuproine ligand and the cosolvent. This catalyst system was successfully used for the selective aerobic oxidation of the steroidal secondary alcohols, nandrolone and 5α-pregnan-3α-ol-20-one, to the corresponding ketones.     

Catalyst parameters determining activity and selectivity of supported gold nanoparticles for the aerobic oxidation of alcohols: the molecular reaction mechanism

As previously reported for for solventless reactions, gold nanoparticles supported on ceria are also excellent general heterogeneous catalysts for the aerobic oxidations of alcohols in organic solvents. Among organic solvents it was found that toluene is a convenient one. A systematic study on the influence of the particle size and gold content on the support has established that the activity correlates linearly with the total number of external gold atoms, and with the surface coverage of the support. Amongst catalysts with different supports, but similar gold particle size and content, gold on ceria exhibits the highest activity. By means of a kinetic study (influence of sigma+ parameter, kinetic isotopic effect, temperature, alcohol concentration and oxygen pressure) a mechanistic proposal consisting of the formation of metal-alcoholate, beta-hydride shift from carbon to metal and M--H oxidation has been proposed that explains all experimental results.     

Nano–silica functionalized with thiol–based dendrimer as a host for gold nanoparticles: An efficient and reusable catalyst for chemoselective oxidation of alcohols

In this paper, we present the synthesis of Au nanoparticles supported on nanosilica thiol based dendrimer, nSTDP. The catalyst was prepared by reduction of HAuCl₄ with NaBH₄ in the presence of nSTDP. The resulting Au_np–nSTDP materials were characterized by FT–IR and UV–vis spectroscopic methods, SEM, TEM, TGA, XPS and ICP analyses. The characterization of the catalyst showed that Au nanoparticles with the size of 2–6 nm are homogeneously distributed on the nSTDP dendrimer with a catalyst loading of about 0.19 mmol/g of catalyst. The Au_np–nSTDP catalyst was used in the oxidation of alcohols with tert–butyl hydroperoxide (TBHP) as oxidant. The influence of vital reaction parameters such as solvent, oxidant and amount of catalyst on the oxidation of alcohols was investigated. These reactions were best performed in an acetonitrile/water mixture (3:2) in the presence of 0.76 mol% of the catalyst on the basis of the Au content at 80 °C under atmospheric pressure of air to afford the desired products in high yields (80–93% for benzyl alcohols). The Au_np–nSTDP catalyst exhibited a high selectivity toward the corresponding aldehyde and ketone (up to 100%). Reusabiliy and stability tests demonstrated that the Au_np–nSTDP catalyst can be recycled with a negligible loss of its activity. Also this catalytic exhibited a good chemoselectivity in the oxidation of alcohols.     

Gold nanoparticles incarcerated in nanoporous syndiotactic polystyrene matrices as new and efficient catalysts for alcohol oxidations

The controlled synthesis of gold nanoparticles (AuNPs), incarcerated in a semicrystalline nanoporous polymer matrix that consisted of a syndiotactic polystyrene-co-cis-1,4-polybutadiene multi-block copolymer is described. This catalyst was successfully tested in the oxidation of primary and secondary alcohols, in which we used dioxygen as the oxidant under mild conditions. Accordingly, (±)-1-phenylethanol was oxidised to acetophenone in high yields (96%) in 1 h, at 35 °C, whereas benzyl alcohol was quantitatively oxidised to benzaldehyde with a selectivity of 96% in 6 h. The specific rate constants calculated from the corresponding kinetic plots were among the highest found for polymer-incarcerated AuNPs. Similar values in terms of reactivity and selectivity were found in the oxidation of primary alcohols, such as cinnamyl alcohol and 2-thiophenemethanol, and secondary alcohols, such as indanol and α-tetralol. The remarkable catalytic properties of this system were attributed to the formation, under these reaction conditions, of the nanoporous ε crystalline form of syndiotactic polystyrene, which ensures facile and selective accessibility for the substrates to the gold catalyst incarcerated in the polymer matrix. Moreover, the polymeric crystalline domains produced reversible physical cross-links that resulted in reduced gold leaching and also allowed the recovery and reuse of the catalyst. A comparison of catalytic performance between AuNPs and annealed AuNPs suggested that multiple twinned defective nanoparticles of about 9 nm in diameter constituted the active catalyst in these oxidation reactions.     

多孔聚噻吩聚合物负载Cu-Cu2O纳米颗粒高效催化醇氧化

通过噻吩的氧化偶联反应,制得富含N、S杂原子的多孔有机聚合物PTPA。然后利用溶剂热法,合成了PTPA负载Cu-Cu₂O的复合材料Cu-Cu₂O/PTPA,并通过红外光谱(IR)、X射线衍射(XRD)、热重分析(TGA)、N₂吸附-脱附、X射线光电子能谱(XPS)、扫描电镜(SEM)和高分辨透射电镜(HRTEM)等对其进行了全面表征。在30℃空气中的温和条件下,以2,2,6,6-四甲基哌啶氧化物(TEMPO)为助催化剂和N-甲基咪唑(NMI)为辅助配体,Cu-Cu₂O/PTPA对苄醇、烯丙醇及杂环醇表现出良好的选择性催化氧化性能。这归因于该材料富含N、S杂原子,Cu-Cu₂O/PTPA在催化苯甲醇氧化方面表现出优异的循环稳定性,重复使用9次后仍保持97%以上的产率。     

多孔聚噻吩聚合物负载Cu-Cu2O纳米颗粒高效催化醇氧化

通过噻吩的氧化偶联反应,制得富含 N、S杂原子的多孔有机聚合物 PTPA。然后利用溶剂热法,合成了 PTPA 负载 Cu-Cu₂O 的复合材料 Cu-Cu₂O/PTPA,并通过红外光谱(IR)、X 射线衍射(XRD)、热重分析(TGA)、N2吸附-脱附、X 射线光电子能谱(XPS)、扫描电镜(SEM)和高分辨透射电镜(HRTEM)等对其进行了全面表征。在30℃空气中的温和条件下,以2,2,6,6-四甲基哌啶氧化物(TEMPO)为助催化剂和N-甲基咪唑(NMI)为辅助配体,Cu-Cu₂O/PTPA对苄醇、烯丙醇及杂环醇表现出良好的选择性催化氧化性能。这归因于该材料富含N、S杂原子,Cu-Cu₂O/PTPA在催化苯甲醇氧化方面表现出优异的循环稳定性,重复使用9次后仍保持97%以上的产率。     

Electrochemical synthesis of silver nanoparticles-coated gold nanoporous film electrode and its application to amperometric detection for trace Cr(VI)

A simple and rapid approach for the electrochemical synthesis of Ag nanoparticles-coated gold nanoporous film (AgGNF) on a gold substrate was reported. The solid gold electrode (SGE) was directly anodized under a high potential of 5 V, and then reduced to obtain gold nanoporous film (AuNF) by freshly prepared ascorbic acid. The Ag nanoparticles (AgNPs) were grown on the AuNF electrode by potential-step electrodeposition. The resulting AgGNF composites electrodes were characterized by scanning electron micro...     

氧化铜修饰羟基磷灰石负载金对醇类需氧氧化的双金属协同催化

采用均匀沉积-沉淀法制备了氧化铜修饰羟基磷灰石负载金催化剂(Au/CuO-HAP),并用原子吸收光谱、N2吸附脱附、X射线粉末衍射、透射电镜和X射线光电子能谱等方法对催化剂结构和形貌进行了表征.考察了催化剂对醇类液相需氧氧化的催化性能.与单金属Au/HAP或CuO-HAP相比较,双金属Au/CuO-HAP对苯甲醇氧化的催化活性和苯甲醛的选择性有显著提高,120 oC反应1.5 h,苯甲醇的转化率和苯甲醛的选择性分别达到99.7%和98.4%.在Au/CuO-HAP的催化下,其它类型的芳香醇均可高选择性转化为相应的醛或酮. Au/CuO-HAP催化剂有很好的稳定性和可回收性,4次回收后,其催化活性没有明显变化.     

Cost‐efficient magnetic nanoporous carbon derived from citrus peel for the selective adsorption of seven insecticides

A magnetic solid‐phase extraction adsorbent that consisted of citrus peel‐derived nanoporous carbon and silica‐coated Fe₃O₄ microspheres (C/SiO₂@Fe₃O₄) was successfully fabricated by co‐precipitation. As a modifier for magnetic microspheres, citrus peel‐derived nanoporous carbon was not only economical and renewable for its raw material, but exerted enormous nanosized pore structure, which could directly influence the type of adsorbed analytes. The C/SiO₂@Fe₃O₄ also possessed the advantages of Fe₃O₄ microspheres like superparamagnetism, which could be easily separated magnetically after adsorption. Integrating the superior of biomass‐derived nanoporous carbon and Fe₃O₄ microspheres, the as‐prepared C/SiO₂@Fe₃O₄ showed high extraction efficiency for target analytes. The obtained material was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and the Brunauer–Emmett–Teller method, which demonstrated that C/SiO₂@Fe₃O₄ was successfully synthesized. Under the optimal conditions, the adsorbent was selected for the selective adsorption of seven insecticides before gas chromatography with mass spectrometry detection, and good linearity was obtained in the concentration range of 2–200 μg/kg with the correlation coefficient ranging from 0.9952 to 0.9997. The limits of detection were in the range of 0.03–0.39 μg/kg. The proposed method has been successfully applied to the enrichment and detection of seven insecticides in real vegetable samples.     

First‐principle calculations on CO oxidation catalyzed by a gold nanoparticle

We have elucidated the mechanism of CO oxidation catalyzed by gold nanoparticles through first‐principle density‐functional theory (DFT) calculations. Calculations on selected model show that the low‐coordinated Au atoms of the Au₂₉ nanoparticle carry slightly negative charges, which enhance the O₂ binding energy compared with the corresponding bulk surfaces. Two reaction pathways of the CO oxidation were considered: the Eley–Rideal (ER) and Langmuir–Hinshelwood (LH). The overall LH reaction O_2(ads) + CO_(gas) → O_2(ads) + CO_(ads) → OOCO_(ads) → O_(ads) + CO_2(gas) is calculated to be exothermic by 3.72 eV; the potential energies of the two transition states ( TS_LH1 and TS_LH2 ) are smaller than the reactants, indicating that no net activation energy is required for this process. The CO oxidation via ER reaction Au₂₉ + O_2(gas) + CO_(gas) → Au₂₉–O_2(ads) + CO_(gas) → Au₂₉–CO_3(ads) → Au₂₉–O_(ads) + CO_2(gas) requires an overall activation barrier of 0.19 eV, and the formation of Au₂₉–CO_3(ads) intermediate possesses high exothermicity of 4.33 eV, indicating that this process may compete with the LH mechanism. Thereafter, a second CO molecule can react with the remaining O atom via the ER mechanism with a very small barrier (0.03 eV). Our calculations suggest that the CO oxidation catalyzed by the Au₂₉ nanoparticle is likely to occur at or even below room temperature. To gain insights into high‐catalytic activity of the gold nanoparticles, the interaction nature between adsorbate and substrate is also analyzed by the detailed electronic analysis. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

Low‐energy ion scattering: Determining overlayer thickness for functionalized gold nanoparticles

With the widespread use of engineered nanoparticles for biomedical applications, detailed surface characterization is essential for ensuring reproducibility and the quality/suitability of the surface chemistry to the task at hand. One important surface property to be quantified is the overlayer thickness of self‐assembled monolayer (SAM) functionalized nanoparticles, as this information provides insight into SAM ordering and assembly. We demonstrate the application of high sensitivity low‐energy ion scattering (HS‐LEIS) as a new analytical method for the fast thickness characterization of SAM functionalized gold nanoparticles (AuNPs). HS‐LEIS demonstrates that a complete SAM is formed on 16‐mercaptohexadecanoic acid (C16COOH) functionalized 14 nm AuNPs. HS‐LEIS also experimentally provides SAM thickness values that are in good agreement with previously reported results from simulated electron spectra for surface analysis of X‐ray photoelectron spectroscopy data. These results indicate HS‐LEIS is a valuable surface analytical method for the characterization of SAM functionalized nanomaterials. Copyright © 2013 John Wiley & Sons, Ltd.