Nickel(II) complexes bearing pyrazolylimine ligand: synthesis,structure, and catalytic properties for vinyl‐type polymerization of norbornene

Two nickel(II) complexes of {2‐[C₃HN₂(R₁)₂‐3,5]}[C(R₂)?N(C₆H₃ⁱPr₂‐2,6)]NiBr₂ (complex 1 : R₁ = CH₃, R₂ = 2,4,6‐trimethylphenyl; complex 2 : R₁ = R₂ = Ph) were synthesized and characterized. The solid‐state structure of complex 1 has been confirmed by X‐ray single‐crystal analysis. Activated by methylaluminoxane (MAO), complexes 1 and 2 are capable of catalyzing the polymerization of norbornene with moderate activities [up to 10.56 × 10⁵ gPNBE (mol Ni h)^?1] with high molecular weights (M_w?13.56 × 10⁵ g mol^?1) and molecular weight distributions were around 2. The influences of polymerization parameters such as reaction temperature and Al–Ni molar ratio on catalytic activity and molecular weight of the polynorbornene were investigated in detail. The obtained polynorbornenes were characterized by means of ¹H‐NMR and FTIR techniques. The analytical results of polymer structures indicated that the norbornene polymerization is vinyl‐type polymerization rather than ROMP. Copyright © 2009 John Wiley & Sons, Ltd.     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

Functionalization of vinylic addition polynorbornenes via efficient copolymerization of norbornene using Ni(II)‐Me complexes

The facile and efficient functionalization of polynorbornene has been achieved through direct copolymerization of norbornene (NB) with 5‐norbornene‐2‐yl acetate (NBA) or 5‐norbornene‐2‐methanol (NBM) using a series of β‐ketiminato Ni(II)‐Me pyridine complexes 1–4 (Scheme 2 ) in the presence of B(C₆F₅)₃. Remarkably, the monomer conversion could reach up to about 96% in 10 min in the NB/NBA copolymerization. The copolymers with wide NBA contents (3.3–38.4 mol %) were obtained by variation of reaction conditions. These copolymers have high molecular weights (MWs) (M_n = 41.8–144 kg/mol) and narrow MW distributions (M_w/M_n = 1.80–2.27). In the absence of alkyl aluminum compounds, a monomer conversion of 81% was observed in the NB/NBM copolymerization, and copolymers with NBM content in the range of 11.2–21.8 mol % were obtained by variation of reaction conditions. In addition, Ni(II)‐Me pyridine complexes 2 was very active at a low B/Ni molar ratio of 6, while bis‐ligand complex 6 bearing the same ligand just showed moderate efficiency at a high B/Ni molar ratio of 20. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Ni(II) and Pd(II) complexes bearing novel bis(β‐ketoamino) ligand and their catalytic activity toward copolymerization of norbornene and 5‐norbornene‐2‐yl acetate combined with B(C6F5)3

Two complexes Mt{C₁₀H₈(O)C[N(C₆H₅)]CH₃}₂ [Mt = Ni(II); Mt = Pd(II)] were synthesized, and the solid‐state structures of the complexes have been determined by single‐crystal X‐ray diffractions. Homopolymerization of norbornene (NB) and copolymerization of NB and 5‐norbornene‐2‐yl acetate (NB‐OCOCH₃) were carried out in toluene with both the two complexes mentioned above in combination with B(C₆F₅)₃. Both the catalytic systems exhibited high activity toward the homopolymerization of NB (as high as 2.7 × 10⁵ g_polymer/mol_Ni h, for Ni(II)/B(C₆F₅)₃ and 2.1 × 10⁵ g_polymer/mol_Pd h for Pd(II)/B(C₆F₅)₃, respectively.). Although the Pd(II)/B(C₆F₅)₃ shows very lower activity toward the copolymerization of NB with NB‐OCOCH₃, Ni(II)/B(C₆F₅)₃ shows a high activity and produces the addition‐type copolymer with relatively high molecular weights (MWs; 1.80–2.79 × 10⁵ g/mol) as well as narrow MW distribution (1.89–2.30). The NB‐OCOCH₃ content in the copolymers can be controlled up to 5.8–12.0% by varying the comonomer feed ratios from 10 to 50%. The copolymers exhibited high transparency, high glass transition temperature (T_g > 263.9 °C), better solubility, and mechanical properties compared with the homopolymer of NB. The reactivity ratios of the two monomers were determined to be r_NB‐OCOMe = 0.08, r_NB = 7.94 for Ni(II)/B(C₆F₅)₃ system, and r_NB‐OCOMe = 0.07, r_NB = 6.49, for Pd(II)/B(C₆F₅)₃ system by the Kelen‐Tüdõs method. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Ni(II) and Pd(II) complexes bearing benzocyclohexane–ketoarylimine for copolymerization of norbornene with 5‐norbornene‐2‐carboxylic ester

A serial of late transition metal complexes, which bearing Benzocyclohexane–ketoarylimine ligand and named as Mt(benzocyclohexane–ketoarylimino)₂ {Mt(bchkai)₂: Mt=Ni or Pd; bchkai=C₁₀H₈(O)CN(Ar)CH₃; Ar=naphthyl or fluoryl}, have been synthesized and characterized. The molecular structures of the ligands and nickel complex have been confirmed by X‐ray single‐crystal analyses. The nickel complexes exhibited very high activity up to 2.7 × 10⁵ g_polymer/mol_Ni·h and palladium complexes showed high activity up to 2.3 × 10⁵ g_polymer/mol_Pd·h for norbornene (NB) homo‐polymerization with tris(pentafluorophenyl)borane as cocatalyst. The four complexes were effective for copolymerization of NB and 5‐norbornene‐2‐carboxylic acid methyl ester (NB‐COOCH₃) in relatively high activities (0.1–2.4 × 10⁵ g_polymer/mol_Mt·h) and produced the addition‐type copolymers with relatively high molecular weights (0.5 × 10⁵–1.2 × 10⁵ g/mol) as well as narrow molecular weight distributions (PDI < 2 for all polymers). Influences of the metals and comonomer feed content on the polymerization activity as well as on the incorporation rates (20.9–42.6%) were investigated. The achieved NB/NB‐COOCH₃ copolymers were confirmed to be noncrystalline, exhibited good thermal stability (T_d > 400°C) and showed good solubility in common organic solvents. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Nickel (II) complexes supported by a fluorinated β‐diketiminate backbone ligand: synthesis,catalytic activity toward norbornene polymerization,and the oxygenated species

The reaction of the lithium salt of backbone fluorinated β‐diketiminate ligands, ArNC(CF₃)CHC(CF₃) NArLi, with trans‐[NiCl(Ph)(PPh₃)₂] gives nickel (II) complexes, ArNC(CF₃)CHC(CF₃)NAr(Ph) (PPh₃)Ni (Ar = 2, 6‐Me₂C₆H₃: 1 ; 2, 6‐ⁱPr₂C₆H₃: 2 ). When activated by methylaluminoxane (MAO), both complexes polymerize norbornene rapidly via a vinyl‐type polymerization mechanism. Treatment of nickel complex 1 with oxygen gives rise to intramolecular aerobic hydroxylation. The oxygenated species 3 was characterized by X‐ray crystallography. Copyright © 2006 John Wiley & Sons, Ltd.     

Vinyl polymerization of norbornene by nickel(II) complexes bearing β‐diketiminate ligands

Norbornene polymerizations were carried out using nickel(II) bromide complexes CH{C(R)NAr}₂NiBr ( 1 , R = CH₃, Ar = 2, 6 ? ⁱPr₂C₆H₃; 2 , R = CH₃, Ar = 2, 6‐Me₂C₆H₃; 3 , R = CF₃, Ar = 2, 6 ? ⁱPr₂C₆H₃; 4 , R = CF₃, Ar = 2, 6‐Me₂C₆H₃) in the presence of methylaluminoxane. Compound 3 is the most active norbornene polymerization catalyst of all the nickel complexes tested. The activity of theses catalysts increases with increases in steric bulk of the substituents on the aryl rings. The electronic nature of the ligand backbone also affects the activity. The resulting polynorbornenes are vinyl type by IR and NMR analyses. Copyright © 2007 John Wiley & Sons, Ltd.     

Pd(II)‐catalyzed polymerization of optically active norbornene carboxylic acid esters

(?)‐(1S,2R)‐Norbornene‐2‐carboxylic acid alkyl esters (alkyl = Me, Bz, L ‐menthyl, or D ‐menthyl) were successfully prepared by the Diels–Alder reaction of cyclopentadiene with (R)‐(?)‐pantolactone‐O‐yl acrylate followed by epimerization and column chromatography. The enantiomeric excess was 99.9%. These monomers were polymerized by Pd(II)‐based catalysts, and high yields of the polymers were obtained. The methyl ester gave an optically active polymer of high optical rotation (monomer [α]_D = ?24.7, polymer [α]_D = ?98.5). This high rotation value of the polymer was attributed to the isotactic chain regulation of the polymer. This high rotation was not observed with methyl esters prepared by the transesterification of menthyl esters. The stereoregular polymer exhibited notable resonance peaks at 39 ppm in ¹³C NMR spectra. No crystallinity was observed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1263–1270, 2006     

C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands prepared by different in situ bonding mechanisms and their use in catalytic (co)polymerization of norbornene and styrene

Two C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands with electron‐withdrawing groups (─CF₃), Ni{PhC(O)CHC[N(9‐fluorenyl)]CF₂}₂ (Ni 1 ) and Ni{CF₃C(O)CHC[N(9‐fluorenyl)]Ph}₂ (Ni 2 ), were synthesized by metal coordination reaction and different in situ bonding mechanisms. The C–C bridged bonds of Ni 1 were formed by in situ intramolecular trifluoromethyl and 9‐fluorenyl carbon–carbon cross‐coupling reaction and those of Ni 2 were formed by in situ intramolecular 9‐fluorenyl carbon–carbon radical coupling reaction mechanism. The obtained complexes were characterized using ¹H NMR spectroscopy and elemental analyses. The crystal and molecular structures of Ni 1 and Ni 2 with C–C bridged configuration were determined using X‐ray diffraction. Ni 1 and Ni 2 were used as catalysts for norbornene (NB) polymerization after activation with B(C₆F₅)₃ and the catalytic activities reached 10⁶ g_polymer mol_Ni^?1 h^?1. The copolymerization of NB and styrene catalyzed by the Ni 1 /B(C₆F₅)₃ system showed high activity (10⁵ g_polymer mol_Ni^?1 h^?1) and the catalytic activities decreased with increasing feed content of styrene. All vinyl‐type copolymers exhibited high molecular weight (10⁴ g mol^?1), narrow molecular weight distribution (M_w/M_n = 1.71–2.80), high styrene insertion ratios (11.13–50.81%) and high thermal stability (T_d > 380°C) and could be made into thin films with high transparency in the visible region (400–800 nm).     

Vinyl polymerization of norbornene catalyzed by 2‐Py‐amidine Ni(II) complex/methylaluminoxane systems

Two 2‐Py‐amidine ligands (2‐Py―NH―C(Ph)═N―Ar, Ar = 2,6‐Me₂C₆H₃ and 2,6‐ⁱPr₂C₆H₃) and the corresponding Ni(II) complexes ( 1 and 2 ) were synthesized and characterized using elemental analysis and FT‐IR, UV–visible, ¹H NMR and ¹³C NMR spectroscopies. X‐ray crystal structures indicate that the chelate ring conformation of the less bulky complex 1 is relatively planar compared with that of the bulky complex 2 . Paramagnetic ¹H NMR and ¹³C NMR studies show that, in solution, the time‐average structures of complexes 1 and 2 have mirror symmetry. Both complexes 1 and 2 were used as catalyst precursors for norbornene polymerization with methylaluminoxane as a co‐catalyst. The effects of Al/Ni ratio, temperature and structure of precursors on the catalytic performance were investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and characterization of novel neutral nickel complexes bearing fluorinated salicylaldiminato ligands and their catalytic behavior for vinylic polymerization of norbornene

A series of salicylaldimine‐based neutral Ni(II) complexes (3a–j) [ArN = CH(C₆H₄O)]Ni(PPh₃)Ph [3a, Ar = C₆H₅; 3b, Ar = C₆H₄F(o); 3c, Ar = C₆H₄F(m); 3d, Ar = C₆H₄F(p); 3e, Ar = C₆H₃F₂(2,4); 3f, Ar = C₆H₃F₂(2,5); 3g, Ar = C₆H₃F₂(2,6); 3h, Ar = C₆H₃F₂(3,5); 3i, Ar = C₆H₂F₃(3,4,5); 3j, Ar = C₆F₅] have been synthesized in good yield, and the structures of complexes 3a and 3i have been confirmed by X‐ray crystallographic analysis. Using modified methylaluminoxane as a cocatalyst, these neutral Ni(II) complexes exhibited high catalytic activities for the vinylic polymerization of norbornene. It was observed that the strong electron‐withdrawing effect of the fluorinated salicylaldiminato ligand was able to significantly increase the catalyst activity for vinylic polymerization of norbornenes. In addition, catalyst activity, polymer yield and polymer molecular weight can also be controlled over a wide range by the variation of reaction parameters such as Al:Ni ratio, norbornene:catalyst ratio, monomer concentration, polymerization temperature and time. Copyright © 2008 John Wiley & Sons, Ltd.     

Copolymerization of norbornene and 5‐norbornene‐2‐yl acetate using novel bis(β‐ketonaphthylamino)Ni(II)/B(C6F5)3/AlEt3 catalytic system

Vinyl‐type copolymerization of norbornene (NBE) and 5‐NBE‐2‐yl‐acetate (NBE‐OCOMe) in toluene were investigated using a novel homogeneous catalyst system based on bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃/AlEt₃. The copolymerization behavior as well as the copolymerization conditions, such as the levels of B(C₆F₅)₃ and AlEt₃, temperature, and monomer feed ratios, which influence on the copolymerization were examined. Without combination of AlEt₃, the catalytic bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃ exhibited very high catalyst activity for polymerization of NBE. Combination of AlEt₃ in catalyst system resulted in low conversion for polymerization of NBE. For copolymerization of NBE and NBE‐OCOMe, involvement of AlEt₃ in catalyst is necessary. Slight addition of NBE‐OCOMe in copolymerization of NBE and NBE‐OCOMe gives rise to significant increase of catalyst activity for catalytic system bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃/AlEt₃. Nevertheless, excess increase of the NBE‐OCOMe content in the comonomer feed ratios results in decrease of conversion as well as activity of catalyst. The achieved copolymers were confirmed to be vinyl‐addition copolymers through the analysis of FTIR, ¹H NMR, and ¹³C NMR spectra. ¹³C NMR studies further revealed the composition of the copolymer and the incorporation rate was 7.6–54.1 mol % ester units at a content of 30–90 mol % of the NBE‐OCOMe in the monomer feeds ratios. TGA analysis results showed that the copolymer exhibited good thermal stability (T_d > 410 °C) and failed to observe the glass transitions temperature over 300 °C. The copolymers are confirmed to be noncrystalline by WAXD analysis results and show good solubility in common organic solvents. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3990–4000, 2009     

Addition polymerization of norbornene using bis(β‐ketoamino)nickel(II)/tris(pentafluorophenyl)borane catalytic systems

Norbornene polymerizations proceeded in toluene with bis(β‐ketoamino)nickel(II) {Ni[CH₃C(O)CHC(NR)CH₃]₂ [R = phenyl ( 1 ) or naphthyl ( 2 )]} complexes as the catalyst precursors and the organo‐Lewis compound tris(pentafluorophenyl)borane [B(C₆F₅)₃] as a unique cocatalyst. The polymerization conditions, such as the cocatalyst/catalyst ratio (B/Ni), catalyst concentration, monomer/catalyst ratio (norbornene/Ni), polymerization temperature, and polymerization time, were studied in detail. Both bis(β‐ketoamino)nickel(II)/B(C₆F₅)₃ catalytic systems showed noticeably high conversions and activities. The polymerization activities were up to 3.64 × 10⁷ g of polymer/mol of Ni h for complex 1 /(B(C₆F₅)₃ and 3.80 × 10⁷ g of polymer/mol of Ni h for complex 2 /B(C₆F₅)₃, and very high conversions of 90–95% were maintained; both polymerizations provided high‐molecular‐weight polynorbornenes with molecular weight distributions (weight‐average molecular weight/number‐average molecular weight) of 2.5–3.0. The achieved polynorbornenes were confirmed to be vinyl‐addition and atactic polymers through the analysis of Fourier transform infrared, ¹H NMR, and ¹³C NMR spectra, and the thermogravimetric analysis results showed that the polynorbornenes exhibited good thermal stability (decomposition temperature > 410 °C). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4733–4743, 2007     

Highly active ethylene polymerization and copolymerization with norbornene using bis(imino‐indolide) titanium dichloride–MAO system

A catalytic system of new titanium complexes with methylaluminoxane (MAO) was found to effectively polymerize ethylene for high molecular weight polyethylene as well as highly active copolymerization of ethylene and norbornene. The bis (imino‐indolide)titanium dichlorides (L₂TiCl₂, 1 – 5 ), were prepared by the reaction of N‐((3‐chloro‐1H‐indol‐2‐yl)methylene)benzenamines with TiCl₄, and characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. The solid‐state structures of 1 and 4 were determined by X‐ray diffraction analysis to reveal the six‐coordinated distorted octahedral geometry around the titanium atom with a pair of chlorides and ligands in cis‐forms. Upon activation by MAO, the complexes showed high activity for homopolymerization of ethylene and copolymerization of ethylene and norbornene. A positive “comonomer effect” was observed for copolymerization of ethylene and norbornene. Both experimental observations and paired interaction orbital (PIO) calculations indicated that the titanium complexes with electron‐withdrawing groups in ligands performed higher catalytic activities than those possessing electron‐donating groups. Relying on different complexes and reaction conditions, the resultant polyethylenes had the molecular weights M_w in the range of 200–2800 kg/mol. The influences on both catalytic activity and polyethylene molecular weights have been carefully checked with the nature of complexes and reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3415–3430, 2007     

Nickel and cobalt complexes bearing β‐ketoamine ligands: syntheses,structures and catalytic behavior for norbornene polymerization

Late transition metal (nickel, cobalt) complexes (1, 2) with β‐ketoamine ligand (L) based on the pyrazolone derivative are synthesized by condensing 1‐phenyl‐3‐methyl‐4‐benzoyl‐5‐pyrazolone with p‐fluoroaniline, and then treating the β‐ketoamine (L) produced with the respective metal halide. The bis(β‐ketoamine)metal complexes can act as catalyst precursors for norbornene polymerization with activation by methylaluminoxane. The effects of the central metal variation in the complex on catalyst activities and polymer microstructure are described. Copyright © 2005 John Wiley & Sons, Ltd.     

Homo‐ and copolymerization of norbornene and 5‐norbornene‐2‐yl acetate with bis‐(β‐ketonaphthylamino)palladium(II)/B(C6F5)3 catalytic system

The polymerization of norbornene with bis(β‐ketonaphthylamino) palladium(II), Pd{CH₃C(O)CHC[N(naphthyl)]CH₃}₂, in combination with tris(pentafluorophenyl)borane (B(C₆F₅)₃), was investigated by varying the B:Pd(II) molar ratio, monomer concentration, reaction temperature, and time. The catalytic activity was found to reach 2.8 × 10⁴ gPolymer/(molPd^?h) and the obtained polynorbornene (PNBE) was confirmed to be vinyl addition polymer and showed good thermo‐stability (T_dec > 350°C), but exhibited poor solubility in organic solvents due to the relative higher stereo regularity. Pd{CH₃C(O)CHC[N(naphthyl)]CH₃}₂/B(C₆F₅)₃ system is also an active catalyst for copolymerization of norbornene and 5‐norbornene‐2‐yl acetate (NBE‐OCOCH₃) in toluene with moderate yields (in 9.2–36.5% yields) and produces the addition‐type copolymer with relatively high molecular weights (0.96 × 10⁴–2.13 × 10⁴ g/mol). The incorporation of functional group in the copolymer can be controlled up to 0.9–23.5 mol% by varying the NBE‐OCOCH₃ monomer feed ratios from 10 to 90%. The copolymers are proved to be noncrystalline and show good solubility in common organic solvents and excellent thermal stability up to 350°C. Copyright © 2011 John Wiley & Sons, Ltd.     

Vinyl homo/copolymerization of norbornene and ethylene using sterically enhanced 1,2‐bis(arylimino)acenaphthene–palladium precatalysts

A family of unsymmetrical 1,2‐bis(imino)acenaphthene‐palladium methyl chloride complexes [1‐[2,6‐{(C₆H₅)₂CH}₂‐ 4‐{C(CH₃)₃}‐C₆H₂N]‐2‐(ArN)C₂C₁₀H₆]PdMeCl (Ar = 2,6‐Me₂Ph Pd1 , 2,6‐Et₂Ph Pd2 , 2,6‐ⁱPr₂Ph Pd3 , 2,4,6‐Me₃Ph Pd4 , 2,6‐Et₂‐4‐MePh Pd5 ) have been prepared and fully characterized by ¹H/¹³C NMR, FTIR spectroscopies, and elemental analysis. X‐ray diffraction analysis of Pd2 complex revealed a square planar geometry. Upon activation with methylaluminoxane, all the palladium complexes displayed high activities for norbornene (NBE) homo‐polymerization producing insoluble polymer. For the copolymerization of NBE with ethylene, Pd4 complex exhibited good activities with high incorporation of ethylene (up to 59.2–77.4%) and the resultant copolymer showed high molecular weights as maximum as 150.5 kg mol⁻¹. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 922–930     

Statistical copolymers of norbornene and 5‐vinyl‐2‐norbornene by a ditungsten complex mediated ring‐opening metathesis Polymerization: Synthesis,thermal properties,and kinetics of thermal decomposition

Statistical copolymers of norbornene (NBE) with 5‐vinyl‐2‐norbornene (VNBE) were prepared by ring‐opening metathesis polymerization, employing the triply bonded ditungsten complex Na[W₂(μ‐Cl)₃Cl₄(THF)₂].(THF)₃. NMR measurements revealed that the side vinyl groups of the VNBE monomer remain intact during the copolymerization reaction. The reactivity ratios were estimated using the Finemann–Ross (FR), the inverted FR, and the Kelen–Tüdos graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad sequence fractions, which were derived using the monomer reactivity ratios. The glass transition temperatures, T_g, of the copolymers were measured by differential scanning calorimetry measurements and were examined in the frame of several theoretical equations allowing the prediction of these T_g values. The best fit was obtained using methods that take into account the monomer sequence distribution of the copolymers. Finally, the kinetics of the thermal decomposition of the copolymers was studied by thermogravimetric analysis in the frame of the Ozawa–Flynn–Wall and Kissinger methods. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4835–4844     

New chiral α‐diimine nickel(II) complexes bearing ortho‐sec‐phenethyl groups for ethylene polymerization

A series of new α‐diimine nickel(II) catalysts bearing bulky chiral sec‐phenethyl groups have been synthesized and characterized. The molecular structure of representative chiral ligand, bis[N,N′‐(4‐methyl‐2,6‐di‐sec‐phenethylphenyl)imino]‐1,2‐dimethylethane rac‐1c and chiral complexes, {bis[N,N′‐(4‐methyl‐2‐sec‐phenethylphenyl)imino]‐2,3‐butadiene}dibromidonickel rac‐2a and bis{bis[N,N′‐(4‐methyl‐2‐sec‐phenethylphenyl)imino]‐2,3‐butadiene}dibromidonickel rac‐2b, were confirmed by X‐ray crystallographic analysis. Complex rac‐2c bearing two chiral sec‐phenethyl groups in the ortho‐aryl position and a methyl group in the para‐aryl position, activated by diethylaluminum chloride (DEAC), showed highly catalytic activity for the polymerization of ethylene [4.12 × 10⁶ g PE (mol Ni.h.bar)^?1], and produced highly branched polyethylenes under low ethylene pressure (branching degree: 104, 118 and 126 branches/1000 C at 20, 40 and 60°C, respectively). Chiral 20‐electron bis‐α‐diimine Ni(II) complex rac‐2b also exhibited high activity toward ethylene polymerization [1.71 × 10⁶ g PE (mol Ni · h · bar)^?1]. The type and amount of branches of the polyethylenes obtained were determined by ¹H and ¹³C NMR. Copyright © 2013 John Wiley & Sons, Ltd.     

Copolymerization of styrene and norbornene with β‐diketiminato nickel/methylaluminoxane catalytic system

Styrene–norbornene (S‐N) copolymerizations were carried out using β‐diketiminato nickel complexes CH{C(CF₃)NAr}₂NiBr (Ar = 2,6‐ⁱPr₂C₆H₃, 1 ; Ar = 2,6‐Me₂C₆H₃, 2 ) in the presence of methylaluminoxane. The influence of the comonomer feed content and polymerization temperature on the conversion and composition of the copolymers with the catalytic system was investigated. An increase in the feed ratio of S/N led to an increase in the incorporated styrene content of the resulting copolymer. NMR characterization of the copolymers generated with the catalytic systems showed that the random S‐N copolymers are produced. Differential scanning calorimetric determination of the copolymers shows higher T_g values than polystyrene, and gel permeation chromatographic measurements have shown that the copolymers possess rather narrow molecular weight distributions, suggesting that the copolymerization take place at a single active site. Copyright © 2012 John Wiley & Sons, Ltd.