Coumarinyl azoimidazolyl complexes of osmium(II) hydridocarbonyls: spectroscopic and structural characterization,oxidation catalysis,photovoltaic effect and density functional theory computation

Os(II) hydridocarbonyl complexes of coumarinyl azoimidazoles, [Osh(CO)(PPh₃)₂(CZ‐4R‐R′)]^0/+ ( 3 , 4 ) (CZ‐R‐H = 2‐(coumarinyl‐6‐azo)‐4‐substituted imidazole or 1‐alkyl‐2‐(coumarinyl‐6‐azo)‐4‐substituted imidazole), were characterized from spectroscopic data and the single‐crystal X‐ray data for one of the complexes, [Osh(CO)(PPh₃)₂(CZ‐4‐Ph)] ( 3c ) (CZ‐4‐Ph = 2‐(coumarinyl‐6‐azo)‐4‐phenylimidazolate), confirmed the structure. The complexes show higher emission (quantum yield ? = 0.0163–0.16) and longer lifetime (τ = 1.4–10.3 ns) than free ligands (? = 0.0012–0.0185 and τ = 0.685–1.306 ns). Cyclic voltammetry shows quasi‐reversible metal oxidation at 0.67–0.94 V for [Os(III)/Os(II)] and 1.21–1.36 V for [Os(IV)/Os(III)] and subsequent azo reductions (?0.68 to ?0.95 V for [? N?N? ]/[? N N? ]^? and irreversible < ?1.2 V for [? N N? ]^?/[? N? N? ]^2?) of the chelated coumarinyl azoimidazole. The complexes are photostable and show better photovoltaic power conversion efficiency than free ligands. Also, the complexes were used as catalysts for the oxidation of primary/secondary alcohols to aldehydes/ketones using oxidizing agents like N‐methylmorpholine N‐oxide, t‐BuOOH and H₂O₂. Density functional theory computation was carried out from the optimized structures and the data obtained were used to interpret the electronic and photovoltaic properties. Copyright © 2016 John Wiley & Sons, Ltd.     

Selective oxidation of tetrahydrofuran with molecular oxygen catalyzed by polyalumazane–platinum complexes

Tetrahydrofuran (THF) was oxidized selectively with molecular oxygen catalyzed by magnesium oxide-based polyalumazane-supported platinum complexes under mild conditions. The selective oxidation of C–H bond α to the oxygen atom of ether and the oxidative path to ester other than ring cleavage to carboxylic acid were controlled by carrying out the reaction at 60°C with nitroethane as solvent. The platinum loading and the reaction time greatly affected the yield of γ-butyrolactone whereas the selectivity always remained at 100%. 76.92% γ-butyrolactone was obtained with 0.2811 mmol platinum loading per gram support within 12 hr. The single product of the THF oxidation was confirmed by ¹H-nuclear magnetic resonance. X-ray photoelectron spectroscopy data also confirmed the more recent report on the activation of the C–H bond by the null valent platinum from the viewpoint of supported platinum catalyst. The oxidation path was also suggested.     

Half‐sandwich ruthenium‐based versatile catalyst for both alcohol oxidation and catalytic hydrogenation of carbonyl compounds in aqueous media

A series of half‐sandwich ruthenium‐based catalysts for both alcohol oxidation and carbonyl compounds hydrogenation have been synthesized through metal‐induced C–H bond activation based on benzothiazole ligands. The neutral ruthenium complexes 1 – 4 were fully characterized by UV–vis, NMR, IR, and elemental analysis. Molecular structures of complexes 1 and 3 were further confirmed by X‐ray diffraction analysis. All complexes exhibited high activity for the catalytic oxidation of a variety of alcohols with ^tBuOOH as oxidants to give carbonyl compounds with high yields in water. Moreover, these half‐sandwich complexes also showed high efficiency for the catalytic hydrogenation of carbonyl compounds in a methanol–water mixture. The catalyst could be reused for at least five cycles without any loss of activity. The catalytic system also worked well for various kinds of substrates with either electron‐donating or electron‐withdrawing groups.     

Carbon–carbon bond formation between secondary alcohols and aldehydes under ruthenium‐catalyzed redox shuttle

Secondary alcohols are coupled with aldehydes in dioxane in the presence of a catalytic amount of a ruthenium catalyst along with KOH to give coupled ketones or coupled secondary alcohols depending on the molar ratio of secondary alcohols to aldehydes and the presence (or absence) of a sacrificial hydrogen acceptor. Copyright © 2011 John Wiley & Sons, Ltd.     

Structural investigations of carrageenan–surfactant systems by synchrotron X‐ray scattering

Small‐angle X‐ray scattering by means of synchrotron radiation was used to study the interaction of κ‐ and ι‐carrageenan of different molar mass in the presence of the gel‐inducing ions, K⁺, with the ionic surfactants cetylpyridinium chloride (CPC) and dodecylpyridinium chloride (DPC). This interaction resulted in a more or less complete shrinking of the gel and in the formation of ordered periodic structures of the surfactant in conjunction with the carrageenan molecules. The influence of the polymer concentration for a given surfactant concentration, the content of surfactant for the same concentration of the polysaccharide, the molar mass, and the linear charge density of the polymer were all investigated. Decreasing the length of the alkyl chain of the surfactant, increasing the charge density of the polymer chain, and increasing the polymer concentration for the samples explored improved the ordering in the carrageenan–surfactant complexes. The structures of the κ‐carrageenan–CPC complexes were investigated as a function of temperature during reversible heating–cooling cycles, and it was shown that the addition of the surfactant lead to a more pronounced temperature stability of polymer network. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2851–2859, 2000     

Palladium–Schiff base–triphenylphosphine catalyzed oxidation of alcohols

Novel palladium(II)‐N‐(2‐pyridyl)‐N′‐(5‐R‐salicylidene) hydrazine triphenylphosphine complexes were synthesized and characterized by UV, IR, ¹H NMR and ³¹P NMR spectral analysis, C, H, N analysis and magnetic susceptibility measurements. The complexes were effective in the catalytic oxidation of primary and secondary alcohols in presence of N‐methyl‐morpholine‐N‐oxide as oxidant. The oxidation reactions were carried out in dichloromethane. A mechanistic study of the above reactions has been proposed. Copyright © 2010 John Wiley & Sons, Ltd.     

Oxidation of methanol catalyzed by silica-supported polystannazane–copper complex

Silica-supported polystannazane–copper complex has been prepared and used as a catalyst for the oxidation of methanol. The results showed that the catalyst could catalyze the oxidation of methanol to formaldehyde at a high yield and selectivity at 30°C and under 1 atm mild conditions. The N/Cu mole ratio in the complex, temperature and the amount of NaOH additive had much influence on the catalytic activity. The complex was stable during the reaction and could be used repeatedly.     

Synthesis,characterization and catalytic activity in Suzuki–Miyaura coupling of palladacycle complexes with n‐butyl‐substituted N‐heterocyclic carbene ligands

A series of monomeric palladacycle complexes bearing n‐butyl‐substituted N‐heterocyclic carbenes, namely [Pd(NHC)X(dmba)] (dmba: dimethylbenzylamine and [Pd(NHC)X(ppy)]; NHC: 1‐n‐butyl‐3‐substituted benzylimidazol‐2‐ylidene; ppy: 2‐phenylpyridine), were prepared either by transmetallation from the corresponding silver carbene complexes or by the reaction of the corresponding acetate‐bridged palladacycle dimer with N‐heterocyclic carbene ligands in high yields. The palladium(II) complexes were characterized using elemental analyses, APCI‐MS, ¹H NMR and ¹³C NMR spectroscopies. These complexes are efficient in the Suzuki–Miyaura coupling reaction between phenylboronic acid and aryl bromides.     

Baeyer–Villiger oxidation of cyclohexanone by molecular oxygen with Fe–Sn–O mixed oxides as catalysts

Fe–Sn–O mixed oxides were synthesized and used as catalysts for Baeyer–Villiger oxidation of cyclohexanone, which showed both high catalytic activity and selectivity. X‐ray powder diffraction and scanning electron microscopy suggested that the Fe–Sn–O catalysts had a tetragonal structure with a grain size of 29.3 nm. An ε‐caprolactone yield as high as 98.8% was obtained in a small‐scale experiment (5 mmol of cyclohexanone). In a scale‐up test (20 mmol of cyclohexanone), the cyclohexanone conversion and ε‐caprolactone yield were 96.7 and 96.5%, respectively. In addition, the catalysts can be reused five times without any major decline in catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Conformational Dependence of Through‐Space Tellurium–Tellurium Spin–Spin Coupling in Peri‐Substituted Bis(Tellurides)

Three related series of peri‐substituted bis(tellurides) bearing naphthalene, acenaphthene and acenaphthylene backbones (Nap/Acenap/Aceyl(TeY)₂ (Nap=naphthalene‐1,8‐diyl N ; Acenap=acenaphthene‐5,6‐diyl A ; Aceyl=acenaphthylene‐5,6‐diyl Ay ; Y=Ph 1 ; Fp 2 ; Tol 3 ; An‐p­ 4 ; An‐o­ 5 ; Tp 6 ; Mes 7 ; Tip 8 ) have been synthesised and their solid‐state structures determined by X‐ray crystallography. Molecular conformations were classified as a function of the two C9‐C‐Te‐C(Y) dihedral angles (θ); in the solid all members adopt AB or CCt configurations, with larger Te(aryl) moieties exclusively imposing the CCt variant. Exceptionally large J(¹²⁵Te,¹²⁵Te) spin–spin coupling constants between 3289–3848 Hz were obtained for compounds substituted by bulky Te(aryl) groups, implying these species are locked in a CCt‐type conformation. In contrast, compounds incorporating smaller Te(aryl) moieties are predicted to be rather dynamic in solution and afford much smaller J values (2050–2676 Hz), characteristic of greater populations of AB conformers with lower couplings. This conformational dependence of through‐space coupling is supported by DFT calculations.     

Characterization of proton‐conducting organic–inorganic polymeric materials by ASAXS

The distribution of ZrO₂ and phosphotungstic acid (PTA) in a matrix of sulfonated polyether ketone was investigated by anomalous small‐angle X‐ray scattering (ASAXS). Scattering curves were obtained using X‐ray energies near the Zr and W absorption edges, allowing the independent analysis of the distribution of ZrO₂ and PTA in the sample. The interaction between both inorganic components improved their dispersion considerably when compared with films containing just one of the additives. The synergism was correlated to previous investigations concerning proton conductivity and permeability of the membranes developed for direct methanol fuel cell. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2981–2992, 2005     

Facile synthesis of PtSnZn nanosheet thin film at oil–water interface by use of organometallic complexes: An efficient catalyst for methanol oxidation and p‐nitrophenol reduction reactions

PtSnZn nanosheet thin film with stable and high activity towards methanol electro‐oxidation was synthesized via a simple reduction of organometallic precursors including [PtCl₂(cod)] (cod = cis,cis‐1,5‐cyclooctadiene) and [Sn(CH₃)₄] complexes, in the presence of [Zn(acac)₂] (acac = acetylacetonate) complex at toluene–water interface. Catalytic activities of PtSnZn nanosheets were investigated in the p‐nitrophenol (p‐Nip) reduction and methanol oxidation reactions. The obtained results demonstrate that PtSnZn nanosheets exhibit a good electrocatalytic performance for methanol oxidation reaction, the catalytic activity of the PtSnZn nanosheets being at least 3.5 times higher than that of Pt nanoparticle thin film. Also, the apparent rate constant obtained for p‐Nip reduction with the PtSnZn nanosheets is at least 2.3 times higher than that for Pt nanoparticle thin film due to the appropriate interaction between platinum, tin and zinc metals and geometric properties of PtSnZn nanosheet thin film. Nanosheets are highly favourable for superior catalytic performances due to their geometric properties. A facile and efficient route was used to synthesize trimetallic alloy thin film at oil–water interface.     

Effect of nitrogen on mechanical,oxidation and structural behaviour of Ti–Si–B–C–N nanocomposite hard coatings deposited by DC sputtering

Ti–Si–B–C–N film was deposited by DC magnetron sputtering at different argon and nitrogen ratios such as N₂/Ar = 1 : 5, 2 : 4, 3 : 3, 4 : 1 and 5 : 0. The formation of TiN and TiB phases was observed because of incorporation of nitrogen. The hardness, modulus, microstructure, structure and bond formation with different nitrogen contents during the deposition were studied by nanoindentation, scanning electron microscope, X‐ray diffraction and X‐ray photoelectron spectroscopy, respectively. The oxidation kinetics of Ti–Si–B–C–N was investigated. The nitrogen incorporation during deposition influences different properties of the coating. Hardness and modulus decreased, and microstructure showed very fine grain presence, and film changes to fully amorphous because of incorporation of nitrogen in the film. Copyright © 2016 John Wiley & Sons, Ltd.     

Study on the anti‐sulfur‐poisoning characteristics of platinum–acetylide–phosphine complexes as catalysts for hydrosilylation reactions

A series of platinum–acetylide–phosphine complexes were synthesized and their anti‐sulfur‐poisoning characteristics investigated. In comparison with Speier's and Karstedt's catalysts, the platinum–acetylide–phosphine complexes exhibited both higher catalytic activity and selectivity for the β‐adduct for the hydrosilylation reactions under the same conditions. Furthermore, the complexes also exhibited a strong ability to resist to sulfur‐poisoning. This indicated that the alkyne ligands containing the silyl group had a strong impact on the hydrosilylation reaction. Copyright © 2014 John Wiley & Sons, Ltd.     

Solid‐State Structural Characterization of Cutinase–ECE‐Pincer–Metal Hybrids

Crystal‐clear structures : The first crystal structures of organometallic pincer–cutinase hybrids (see figure) provide insight into the 3D structural arrangement of both the protein and the organometallic pincer moiety, and reveal different binding modes for different pincers.

     

The metal complexes of new Schiff bases containing phosphonate groups and catalytic properties for alkane oxidation

In this study, two new salicylidene phosphonate ligands (HL¹ and HL²) and their metal complexes (Cu²⁺, VO²⁺ and La³⁺) were synthesized and characterized by spectroscopic and analytical methods. The molecular structure of the ligand HL¹ was determined by single‐crystal X‐ray diffraction study. In the structure of the ligand, there is an intramolecular phenol‐imine hydrogen bond. The synthesized compounds exhibit only one emission maximum upon excitation at 270–295  nm range. Complexation of the Schiff base ligands with metal ions did not cause a considerable quenching effect. Finally, the complexes prepared were used as catalysts in cyclohexane oxidation under microwave irradiation. The complexes showed high conversion rates (> 90%) for cyclohexane oxidation; however, poor selectivity was observed for all complexes. The La³⁺ complexes showed better selectivity for cyclohexane → cyclohexanol transformation with about 45% selectivity.     

Asymmetric Diels–Alder reactions in supercritical carbon dioxide catalyzed by rare earth complexes

The rare earth(III) salt catalysed asymmetric Diels–Alder reaction of cyclopentadiene with a chiral dienophile in supercritical carbon dioxide (scCO₂) proceeded rapidly to give the adduct with a higher diastereoselectivity than that in dichloromethane; Yb(ClO₄)₃ gave the endo adduct with value up to 77% de at 40°C, 8 MPa. The chiral rare earth diketonate catalyzed hetero Diels–Alder reaction of the Danishefsky's diene with benzaldehyde gave a higher yield and an enantioselectivity in scCO₂ than that in dichloromethane. Scandium/pybox 8a complex catalysed asymmetric Diels–Alder reaction of 3-crotonoyl-2-oxazolidinone with cyclopentadiene in the presence of MS4A proceeded smoothly in scCO₂ to give the endo adduct 10 in a good yield with up to 88% ee.     

Polydomain–Monodomain Orientational Process in Smectic‐C Main‐Chain Liquid‐Crystalline Elastomers

The polydomain–monodomain (PM) transformation takes place when a polydomain of a smectic‐C main‐chain liquid‐crystalline elastomer (SmC MCLCE) is uniaxially stretched. We present results based on a combination of mechanical and X‐ray experiments which show how the domains initially rearrange to finally form a perfect conical layer distribution (monodomain) when the sample is fully stretched. The rearrangement and orientational process of the domains is quantified and compared to the parallel and perpendicular uniaxial stress–strain deformations of a monodomain sample. The stress–strain behaviour of the polydomain lays between the uniaxial deformations, parallel and perpendicular to the director, of the monodomain sample.

     

Oxygen reduction and hydrogen evolution–oxidation reactions on Cu(hkl) surfaces

Taking advantage of the ring collection properties of the rotating ring–disk electrode with a single-crystal copper disk, we have shown that the oxygen reduction reaction and the hydrogen evolution–oxidation reactions on Cu(111) and Cu(100) surfaces in sulfuric acid are structure-sensitive processes. An interpretation of the structural sensitivity is presented, based on the premise of the structure-sensitive adsorption of (bi)sulfate anions. We have observed that the ordering kinetics of the (bi)sulfate on Cu(hkl) have an important role in the mechanism of the oxygen reduction reaction.     

Dynamic Vapochromic Behaviors of Organic Crystals Based on the Open–Close Motions of S‐Shaped Donor–Acceptor Folding Units

The first vapochromic organic crystals are described with respect to their preparation, color change, adsorption/desorption properties, crystal structures, and color‐change mechanism. Non‐solvatochromic, 1,4,5,8‐naphthalene‐tetracarboxylic diimide (NDI) derivatives 1 a bearing two pyrrole imine (PI) tethers have been used as a motif for the crystal packing template. Red‐purple vapochromic solid 3 was prepared by evacuation of orange crystals 2 (equivalent to 1 a ?2 MeOH), obtained by recrystallization of 1 a from MeOH. Solid 3 showed high‐adsorption ability and unprecedented vapor‐dependent color changes upon exposure to a variety of organic vapors, whereas light brown amorphous solid 1 a , did not show vapo‐ or solvatochromic behavior toward any organic solvent. The strong adsorption capability of 3 was confirmed by TGA experiments and adsorption/desorption isotherms. Analysis of the solid‐state UV/Vis analysis revealed that the vapor‐dependent color changes of 3 were owed to the specific interference of solvent vapors with its broad CT absorbance at λ=450–650 nm. Packing structures of 1 a in orange crystals 2 , red‐purple solid 3 , and regenerated orange solid 2 were unequivocally established by single crystal and synchrotron powder X‐ray diffraction, respectively. Molecular structures and arrays of 1 a in these materials indicated that 1) unit 1 a had an S‐shaped folded conformation in 2 and 3 by intramolecular donor–acceptor interactions between NDI and two PI units; 2) inclusion of the guest vapor into the S‐shaped template decreased the intramolecular PI‐NDI interactions, accompanied by increasing intermolecular NDI‐NDI and PI‐PI interactions; and 3) such flexible, open–close motions of the S‐shaped template could be repeated during reversible adsorption/desorption processes without degradation of crystal packing. The adsorption properties and mechanism of molecular shape‐dependent vapochromic behavior of 3 are discussed with reference to experimental results, crystallographic data, and theoretical calculations.