Ruthenium-catalyzed transfer hydrogenation of aromatic ketones with aminophosphine or bis(phosphino)amine ligands derived from isopropyl substituted anilines

A series of new highly active Ru(II) complexes with two new (N-diphenylphosphino)isopropylanilines, having an isopropyl substituent at carbon 2- (1) or 2,6- (2) and two new bis(diphenylphosphino)isopropylanilines, having an isopropyl substituent at carbon atom 2- (3) or 4- (4), were prepared starting from the dimeric complex [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂. All the compounds have been fully characterized by microanalysis, IR, ³¹P{1H} NMR, ¹H NMR and ¹³C NMR spectroscopies. Following activation by NaOH, complexes 5–8 were tested in the transfer hydrogenation of acetophenone derivatives with iso-PrOH as the hydrogen source. Catalytic studies showed that the complexes are excellent catalytic precursors for the transfer hydrogenation of acetophenone derivatives.     

Transfer hydrogenation of ketones catalysed by half‐sandwich (η6‐p‐cymene) ruthenium(II) complexes incorporating benzoylhydrazone ligands

Neutral half‐sandwich η⁶‐p ‐cymene ruthenium(II) complexes of general formula [Ru(η⁶‐p ‐cymene)Cl(L)] (HL = monobasic O, N bidendate benzoylhydrazone ligand) have been synthesized from the reaction of [Ru(η⁶‐p ‐cymene)(μ‐Cl)Cl]₂ with acetophenone benzoylhydrazone ligands. All the complexes have been characterized using analytical and spectroscopic (Fourier transform infrared, UV–visible, ¹H NMR, ¹³C NMR) techniques. The molecular structures of three of the complexes have been determined using single‐crystal X‐ray diffraction, indicating a pseudo‐octahedral geometry around the ruthenium(II) ion. All the ruthenium(II) arene complexes were explored as catalysts for transfer hydrogenation of a wide range of aromatic, cyclic and aliphatic ketones with 2‐propanol using 0.1 mol% catalyst loading, and conversions of up to 100% were obtained. Further, the influence of other variables on the transfer hydrogenation reaction, such as base, temperature, catalyst loading and substrate scope, was also investigated.     

Ru–η6‐benzene–phosphine complex‐catalyzed transfer hydrogenation of ketones

Three Ru–η⁶‐benzene–phosphine complexes bearing tri‐(p‐methoxyphenyl)phosphine, triphenylphosphine and tri‐(p‐trifluoromethylphenyl)phosphine were synthesized and characterized by ³¹P{¹H} NMR, ¹H NMR, ¹³C{¹H} NMR and elemental analyses. Complex 1 was further identified by X‐ray crystallography. These complexes exhibit good to excellent activities for the transfer hydrogenation of ketones in refluxing 2‐propanol, and the highest turnover frequency (TOF) is up to 5940 h⁻¹. The effect of electronic factors of these complexes on the transfer hydrogenation of ketones reveals that the catalytic activity is promoted by electron‐donating phosphine and the catalyst stability is improved by electron‐withdrawing phosphine. Copyright © 2011 John Wiley & Sons, Ltd.     

Cationic and neutral ruthenium(II) complexes containing both arene or Cp* and functionalized aminophosphines. Application to hydrogenation of aromatic ketones

Hydrogen transfer reduction processes are attracting increasing interest from synthetic chemists in view of their operational simplicity. For this aim, a series of novel Ru(II) complexes with the P-N-P ligands were synthesized starting from the complex [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ or [RuCp*Cl(COD)]. The complexes were fully characterized by analytical and spectroscopic methods. ³¹P-{¹H} NMR, DEPT, ¹H-¹³C HETCOR or ¹H-¹H COSY correlation experiments were used to confirm the spectral assignments. Complexes 5, 6 and 7 catalyze the transfer hydrogenation of acetophenone derivatives to 1-phenylethanol derivatives in the presence of iso-PrOH as the hydrogen source. Catalytic studies showed that all complexes are excellent catalytic precursors for the transfer hydrogenation of acetophenone derivatives in 0.1 M iso-PrOH solution. Notably 5 acts as an excellent catalyst giving the corresponding alcohols in excellent conversions up to 99% (TOF ≤ 492 h⁻¹).     

Random copolymerization of l‐lactide and ε‐caprolactone by aluminum alkoxide complexes supported by N2O2 bis(phenolate)‐amine ligands

The bowl‐shaped aluminum alkoxide complexes bearing N₂O₂ bis(phenolate)‐amine ligands having different side arms as pyridine ( 1 ), dimethyl amine ( 2 ), and diethyl amine ( 3 ) were shown to be highly efficient and well behaved in the homopolymerization and copolymerization of l ‐lactide (LA) and ε‐caprolactone (ε‐CL) at 100 °C. The rates of copolymerization are similar for Complexes 1 – 3 where nearly full conversions were achieved in 60 h for [LA]:[CL]:[Al] ratio of 50:50:1. The minor adjustment of the side arms of the Catalysts 1 – 3 gave profound differences in the LA/ε‐CL copolymer sequences where tapered, gradient, and highly random structures were obtained in one system, respectively. The chelation of LA to Al metal after ring‐opening process and suitable steric hindrance of the side arms were believed to participate and saturate the aluminum metal centers giving different copolymer structures. The random LA/ε‐CL copolymer structure was confirmed by nuclear magnetic resonance and differential scanning calorimetry analysis. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1635–1644     

Synthesis of 2‐aminomethylpiperidine ruthenium(II) phosphine complexes and their applications in transfer hydrogenation of aryl ketones

The complex trans,cis‐[RuCl₂(PPh₃)₂(ampi)] (2) was prepared by reaction of RuCl₂(PPh₃)₃ with 2‐aminomethylpiperidine(ampi) (1). [RuCl₂(PPh₂(CH₂)_nPPh₂)(ampi) (n = 3, 4, 5)] (3–5) were synthesized by displacement of two PPh₃ with chelating phosphine ligands. All complexes (2–5) were characterized by ¹ H, ¹³C, ³¹P NMR, IR and UV‐visible spectroscopy and elemental analysis. They were found to be efficient catalysts for transfer hydrogen reactions. Copyright © 2012 John Wiley & Sons, Ltd.     

Binuclear dichlorido(η6‐p‐cymene)ruthenium(II) complexes with bis(nicotinate)‐ and bis(isonicotinate)‐polyethylene glycol ester ligands

Neutral binuclear ruthenium complexes 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 of the general formula [{RuCl₂(η⁶‐p‐cym)}₂ μ‐(N^∩N)] (N^∩N = bis(nicotinate)‐ and bis(isonicotinate)‐polyethylene glycol esters: (3‐py)COO(CH₂CH₂O)_nCO(3‐py) and (4‐py)COO(CH₂CH₂O)_nCO(4‐py), n =1–4), as well as mononuclear [RuCl₂(η⁶‐p‐cym)((3‐py)COO(CH₂CH₂OCH₃)‐κN)], complex 9 , were synthesized and characterized using elemental analysis and electrospray ionization high‐resolution mass spectrometry, infrared, ¹H NMR and ¹³C NMR spectroscopies. Stability of the binuclear complexes in the presence of dimethylsulfoxide was studied. Furthermore, formation of a cationic complex containing bridging pyridine‐based bidentate ligand was monitored using ¹H NMR spectroscopy. Ligand precursors, polyethylene glycol esters of nicotinic ( L1 · 2HCl– L4 · 2HCl and L9 · HCl) and isonicotinic acid dihydrochlorides ( L5 · 2HCl– L8 · 2HCl), binuclear ruthenium(II) complexes 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 and mononuclear complex 9 were tested for in vitro cytotoxicity against 518A2 (melanoma), 8505C (anaplastic thyroid cancer), A253 (head and neck tumour), MCF‐7 (breast tumour) and SW480 (colon carcinoma) cell lines. Copyright © 2014 John Wiley & Sons, Ltd.     

Ruthenium complexes of aminophosphine ligands and their use as pre-catalysts in the transfer hydrogenation of aromatic ketones: X-ray crystal structure of thiophene-2-(N-diphenylthiophosphino)methylamine

Reaction of thiophene-2-methylamine with one or two equivalents of PPh₂Cl in the presence of NEt₃, proceeds in thf to give thiophene-2-(N-diphenylphosphino)methylamine, 1a and thiophene-2-(N,N-bis(diphenylphosphino))methylamine, 2a respectively, under anaerobic conditions. Oxidations of 1a and 2a with aqueous hydrogen peroxide, elemental sulfur or gray selenium in thf gives the corresponding oxides, sulfides and selenides [Ph₂P(E)NHCH₂-C₄H₃S] (E: O 1b, S 1c, Se 1d) and [(Ph₂P(E))₂NCH₂-C₄H₃S], (E: O 2b, S 2c, Se 2d) respectively, in high yield. Furthermore, two novel Ru(II) complexes with the P-N ligands 1a and 2a were synthesized starting with the complex [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂. The complexes were fully characterized by analytical and spectroscopic methods. ³¹P-{¹H} NMR, DEPT, ¹H-¹³C HETCOR or ¹H-¹H COSY correlation experiments were used to confirm the spectral assignments. The molecular structure of thiophene-2-(N-diphenylthiophosphino)methylamine was also elucidated by single-crystal X-ray crystallography. Following activation by NaOH, compounds 3 and 4 catalyze the transfer hydrogenation of acetophenone derivatives to 1-phenylethanol derivatives in the presence of iso-PrOH as the hydrogen source. [Ru(Ph₂PNHCH₂-C₄H₃S)(η⁶-p-cymene)Cl₂], 3 and [Ru((PPh₂)₂NCH₂-C₄H₃S)(η⁶-p-cymene)Cl]Cl, 4 complexes are suitable catalyst precursors for the transfer hydrogenation of acetophenone derivatives in 0.1 M iso-PrOH solution. Notably 4 acts as an excellent catalyst giving the corresponding alcohols in excellent conversions up to 99% (TOF ? 744 h⁻¹). This transfer hydrogenation is characterized by low reversibility under the experimental conditions.     

Half‐sandwich Ru (II) complexes containing (N,O) Schiff base ligands: Catalysts for base‐free transfer hydrogenation of ketones

Two new half‐sandwich Ru (II)(p‐cymene) complexes ( 1 and 2 ) containing dopamine‐based (N, O) Schiff base ligands ( L ¹ H and L ² H ) were synthesized and characterized by FT‐IR, UV–Visible and ¹H & ¹³C NMR spectral techniques, and elemental analyses. The spectroscopic and analytical data revealed monobasic bidentate coordination of the ligands with Ru ion. The molecular structures of L ¹ H , L ² H and 2 were further confirmed by single crystal X‐ray diffraction study. Complexes 1 and 2  have been employed as catalysts in the transfer hydrogenation of ketones using 2‐propanol as a hydrogen source at 85 °C under base‐free condition. Good to the excellent yield of secondary alcohols, gram scale synthesis, and high TON and TOF made this catalytic system interesting.     

Novel cyclohexyl‐based aminophosphine ligands and use of their Ru(II) complexes in transfer hydrogenation of ketones

Two new aminophosphines – furfuryl‐(N‐dicyclohexylphosphino)amine, [Cy₂PNHCH₂–C₄H₃O] ( 1 ) and thiophene‐(N‐dicyclohexylphosphino)amine, [Cy₂PNHCH₂–C₄H₃S] ( 2 ) – were prepared by the reaction of chlorodicyclohexylphosphine with furfurylamine and thiophene‐2‐methylamine. Reaction of the aminophosphines with [Ru(η⁶‐p‐cymene)(μ‐Cl)Cl]₂ or [Ru(η⁶‐benzene)(μ‐Cl)Cl]₂ gave corresponding complexes [Ru(Cy₂PNHCH₂–C₄H₃O)(η⁶‐p‐cymene)Cl₂] ( 1a ), [Ru(Cy₂PNHCH₂–C₄H₃O)(η⁶‐benzene)Cl₂] ( 1b ), [Ru(Cy₂PNHCH₂–C₄H₃S)(η⁶‐p‐cymene)Cl₂] ( 2a ) and [Ru(Cy₂PNHCH₂–C₄H₃S)(η⁶‐benzene)Cl₂] ( 2b ), respectively, which are suitable catalyst precursors for the transfer hydrogenation of ketones. In particular, [Ru(Cy₂PNHCH₂–C₄H₃S)(η⁶‐benzene)Cl₂] acts as a good catalyst, giving the corresponding alcohols in 98–99% yield in 30 min at 82 °C (up to time of flight ≤ 588 h^?1). Copyright © 2014 John Wiley & Sons, Ltd.     

Organosoluble and colorless fluorinated poly(ether imide)s from 1,2‐bis(3,4‐dicarboxyphenoxy)benzene dianhydride and trifluoromethyl‐substituted aromatic bis(ether amine)s

A series of novel aromatic poly(ether imide)s (PEI) containing ortho‐catenated phenylene rings and pendant trifluoromethyl group have been prepared from 1,2‐bis(3,4‐dicarboxyphenoxy)benzene dianhydride (1) with seven trifluoromethyl‐substituted aromatic bis(ether amine)s ( 2a‐g ) via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by chemical imidization to the polyimides. These PEIs had inherent viscosities in the range of 0.45–1.17 dL/g that corresponded to weight–average and number–average molecular weights (by gel‐permeation chromatography) of 42,000–102,000 and 28,500–67,500, respectively. All the PEIs were readily soluble in many organic solvents and could be solution‐cast into transparent, flexible, and strong films. These films were essentially colorless; they had a very low yellowness index of 4.34–6.55 and an UV–vis absorption cut‐off wavelength at 361–370 nm. The PEIs exhibited moderate‐to‐high glass‐transition temperatures (T_g) in the range of 185–270 °C, softening temperatures (T_s) in the range of 184–275 °C, and 10% weight loss temperatures higher than 466 °C in nitrogen or in air. They also showed low moisture absorptions of 0.49–0.70% and low dielectric constants of 2.78–3.26 (measured at 10 kHz). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3092–3102, 2006     

Titanium complexes bearing amine bis(phenolate) ligands: Synthesis,structure and catalysis in ring‐opening polymerization of lactide

Monomeric bis(isopropoxy) titanium complexes LTi(Oⁱ Pr)₂ (L =  ─ OC₆H₂–4‐R¹–6‐R²–2‐CH₂N[(CH₂)₂N(R³)₂]CH₂–4‐R⁴–6‐R⁵‐C₆H₂O ─ , R¹ = R² = ^t Bu, R³ = Et, R⁴ = R⁵ = Cl, (L¹)Ti(Oⁱ Pr)₂; R¹ = R² = Me, R³ = Et, R⁴ = R⁵ = Me, (L²)Ti(Oⁱ Pr)₂; R¹ = R² = ^t Bu, R³ = Et, R⁴ = OMe, R⁵ = ^t Bu, (L³)Ti(Oⁱ Pr)₂; R¹ = R⁴ = OMe, R³ = Et, R² = R⁵ = ^t Bu, (L⁴)Ti(Oⁱ Pr)₂; R¹ = R² = ^t Bu, R³ = Me, R⁴ = OMe, R⁵ = ^t Bu, (L⁵)Ti(Oⁱ Pr)₂) supported by amine bis(phenolate) ligands were synthesized and characterized using NMR spectroscopy and elemental analysis. The solid‐state structure of (L³)Ti(Oⁱ Pr)₂ was determined using single‐crystal X‐ray diffraction. (L^1–5)Ti(Oⁱ Pr)₂ were all found to initiate the ring‐opening polymerization of l ‐lactide and rac ‐lactide in a controlled manner at 110–160°C. As shown by kinetic studies, (L¹)Ti(Oⁱ Pr)₂ polymerized l ‐lactide faster than did (L^2–5)Ti(Oⁱ Pr)₂. In addition, good number‐average molecular weight and narrow polydispersity index (1.00–1.71) of polymers were also obtained. The microstructure of the polymers and a possible mechanism of coordination–insertion of polymerization were evidenced by MALDI‐TOF and ¹H NMR spectra of the polylactides.     

Diamine bis(phenolate) and pendant amine bis(phenolate) ligands: catalytic activity for the room temperature palladium‐catalyzed Suzuki–Miyaura coupling reaction

A series of amine bis(phenolate) ligands bearing aryl substituents of varying steric bulk are reported and characterized using single‐crystal X‐ray diffraction, NMR spectroscopy and high‐resolution mass spectrometry experiments. Palladium complexes derived in situ from these ligands are evaluated as catalysts for the Suzuki–Miyaura coupling of phenylboronic acid and aryl bromides. High conversions are observed for these reactions in methanol solvent at low catalyst loadings (0.01 mol%), short reaction times (30 min) and mild temperatures (30°C). Conversion is observed for a range of substrates, and is found to depend on the nature of the external base and solvent employed. These findings demonstrate the utility of catalysts derived from late transition metal complexes of amine bis(phenolate) ligands, particularly those bearing bulky cumyl substituents. Copyright © 2015 John Wiley & Sons, Ltd.     

The application of tunable tridendate P‐based ligands for the Ru(II)‐catalysed transfer hydrogenation of various ketones

Two novel versatile tridendate aminophosphine–phosphinite and phosphinite ligands were prepared and their trinuclear neutral ruthenium(II) dichloro complexes were found to be effective catalysts for the transfer hydrogenation of various ketones in excellent conversions up to 99% in the presence of 2‐propanol/NaOH in 0.1 M isopropanol solution. Particularly, [Ru₃(PPh₂OC₂H₄)₂ N–PPh₂(η⁶‐p‐cymene)₃Cl₆] acts as an excellent catalyst giving the corresponding alcohols in excellent conversion up to 99% (turnover frequency ≤ 1176 h^?1). A comparison of the catalytic properties of the complexes is also discussed briefly. Furthermore, the structures of these ligands and their corresponding complexes have also been clarified using a combination of multinuclear NMR spectroscopy, infrared spectroscopy and elemental analysis. ¹H–¹³C HETCOR or ¹H–¹H COSY correlation experiments were used to confirm the spectral assignments. Copyright © 2014 John Wiley & Sons, Ltd.     

Ruthenium(II) complexes derived from C2‐symmetric ferrocene‐based chiral bis(phosphinite) ligands: synthesis and catalytic activity towards the asymmetric reduction of acetophenones

Chiral secondary alcohols are very important building blocks and valuable synthetic intermediates both in organic synthesis and in the pharmaceutical industry for producing biologically active complex molecules. A series of new chiral Ru–phosphinite complexes ( 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 ) were prepared from chiral C₂‐symmetric ferrocenyl phosphinites and corresponding chloro complex, [Ru(η⁶‐p‐cymene)(μ‐Cl)Cl]₂. The complexes were characterized using conventional spectroscopic methods. The binuclear complexes were tested as pre‐catalysts and were found to be good pre‐catalysts for the asymmetric transfer hydrogenation of substituted acetophenones in basic 2‐propanol at 82°C, providing the corresponding optically active alcohols with almost quantitative conversion and modest to high enantioselectivities (46–97%). Amongst the all complexes, complex 6 gave the highest ee of 97% in the reduction of 2‐methoxyacetophenone to (S)‐1‐(2‐methoxyphenyl)ethanol at 82°C. Copyright © 2015 John Wiley & Sons, Ltd.     

Ruthenium(II) complexes bearing pyridine‐based tridentate and bidentate ligands: catalytic activity for transfer hydrogenation of aryl ketones

Ru(II) complexes of the general formula [RuCl₂(′′)(L)] (1: ′N = N_b, L = MeOH; 2: ′N = N_b, L = CH₃CN; 3: ′N = N_d, L = CH₃CN; 4: ′N = N_p, L = CH₃CN), [Ru(p‐cymene)(_a–b)Cl]Cl (5a: N N_a = 2,2′‐bipyridine; 5b: N N_b = 4,4′‐dimethyl–2,2′‐bipyridine), [Ru(′′)(_a–b)Cl]Cl (6a: ′N = N_b, _a = 2,2′‐bipyridine; 6b: ′N = N_b, _b = 4,4′‐dimethyl‐2,2′‐bipyridine; 7a: ′N = N_d, _a = 2,2′‐bipyridine; 7b: ′N = N_d, _b = 4,4′‐dimethyl‐2,2′‐bipyridine; 8a: ′N = N_p, _a = 2,2′‐bipyridine; 8b: ′N = N_p, _b = 4,4′‐dimethyl‐2,2′‐bipyridine) and [Ru(′′)(_a)Cl]BF₄ (9a: ′N = N_b; _a = 2,2′‐bipyridine) were synthesized from the corresponding [RuCl₂(p‐cymene)]₂ dimer, ′′ and _a–b ligands. The compounds were characterized by elemental analysis, IR and NMR. Complex 9a was studied by X‐ray diffraction, confirming its cationic‐mononuclear [RuCl(_bb)(_a)]⁺ nature. The synthesized Ru(II) complexes (1–8) were employed as catalysts for the transfer hydrogenation of ketones to secondary alcohols in the presence of KOH using 2‐propanol as a hydrogen source at 82°C. The rates of the transfer hydrogenation reactions strongly depended on the type of and ancillary ligands. Copyright © 2012 John Wiley & Sons, Ltd.     

Novel organosoluble and colorless poly(ether imide)s based on 3,3‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]phthalide dianhydride and aromatic bis(ether amine)s bearing pendent trifluoromethyl groups

A novel series of colorless and highly organosoluble poly(ether imide)s were prepared from 3,3‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]phthalide dianhydride with various fluorinated aromatic bis(ether amine)s via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by cyclodehydration to produce the polymer films. The poly(ether imide)s showed excellent solubility, with most of them dissoluble at a concentration of 10 wt % in amide polar solvents, in ether‐type solvents, and even in chlorinated solvents. Their films had a cutoff wavelength between 358 and 373 nm, and the yellowness index ranged from 3.1 to 9.5. The glass‐transition temperatures of the poly(ether imide) series were recorded between 237 and 297 °C, the decomposition temperatures at 10% weight loss were all above 494 °C, and the residue was more than 54% at 800 °C in nitrogen. These films showed high tensile strength and also were characterized by higher solubility, lighter color, and lower dielectric constants and moisture absorption than an analogous nonfluorinated polyimide series. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3140–3152, 2006     

Ferrocene based chiral binuclear η6‐benzene‐Ru(II)‐phosphinite complexes: Synthesis,characterization and catalytic activity in asymmetric reduction of ketones

In the present study, a series of chiral C₂‐symmetric ferrocenyl based binuclear η⁶‐benzene‐Ru(II) complexes bearing diphenylphosphinite and diisopropylphosphinite moieties have been synthesised. The new binuclear η⁶‐benzene‐Ru(II)‐phosphinite complexes were characterised based on nuclear magnetic resonance (¹H, ¹³C, ³¹P–NMR), FT‐IR spectroscopy and elemental analysis. Then, these complexes have been screened as catalytic precursors in the transfer hydrogenation of acetophenone with 2‐propanol as both the hydrogen source and solvent in the presence of KOH. The corresponding optically active secondary alcohols were obtained in excellent conversion rates between 96 and 99% and moderate to good enantioselectivities (up to 78% ee). The complex 5 was the most efficient catalyst among the four new complexes investigated herein.     

Chiral η6‐Arene/N‐Tosylethylenediamine–Ruthenium(II) Complexes: Solution Behavior and Catalytic Activity for Asymmetric Hydrogenation

Aromatic ketones are enantioseletively hydrogenated in alcohols containing [RuX{(S,S)‐Tsdpen}(η⁶‐p‐cymene)] (Tsdpen=TsNCH(C₆H₅)CH(C₆H₅)NH₂; X=TfO, Cl) as precatalysts. The corresponding Ru hydride (X=H) acts as a reducing species. The solution structures and complete spectral assignment of these complexes have been determined using 2D NMR (¹H‐¹H DQF‐COSY, ¹H‐¹³C HMQC, ¹H‐¹⁵N HSQC, and ¹H‐¹⁹F HOESY). Depending on the nature of the solvents and conditions, the precatalysts exist as a covalently bound complex, tight ion pair of [Ru⁺(Tsdpen)(cymene)] and X^?, solvent‐separated ion pair, or discrete free ions. Solvent effects on the NH₂ chemical shifts of the Ru complexes and the hydrodynamic radius and volume of the Ru⁺ and TfO^? ions elucidate the process of precatalyst activation for hydrogenation. Most notably, the Ru triflate possessing a high ionizability, substantiated by cyclic voltammetry, exists in alcoholic solvents largely as a solvent‐separated ion pair and/or free ions. Accordingly, its diffusion‐derived data in CD₃OD reflect the independent motion of [Ru⁺(Tsdpen)(cymene)] and TfO^?. In CDCl₃, the complex largely retains the covalent structure showing similar diffusion data for the cation and anion. The Ru triflate and chloride show similar but distinct solution behavior in various solvents. Conductivity measurements and catalytic behavior demonstrate that both complexes ionize in CH₃OH to generate a common [Ru⁺(Tsdpen)(cymene)] and X^?, although the extent is significantly greater for X=TfO^?. The activation of [RuX(Tsdpen)(cymene)] during catalytic hydrogenation in alcoholic solvent occurs by simple ionization to generate [Ru⁺(Tsdpen)(cymene)]. The catalytic activity is thus significantly influenced by the reaction conditions.     

Synthesis and characterization of transition metal complexes of thiophene‐2‐methylamine: X‐ray crystal structure of palladium (II) and platinum (II) complexes and use of palladium(II) complexes as pre‐catalyst in Heck and Suzuki cross‐coupling reactions

The reactions of thiophene‐2‐(N‐diphenylphosphino)methylamine, Ph₂PNHCH₂‐C₄H₃S, 1 and thiophene‐2‐[N,N‐bis(diphenylphosphino)methylamine], (Ph₂P)₂NCH₂‐C₄H₃S, 2, with MCl₂(cod) (M = Pd, Pt; cod = 1,5‐cyclooctadiene) or [Cu(CH₃CN)₄]PF₆ yields the new complexes [M(Ph₂PNHCH₂‐C₄H₃S)₂Cl₂], M = Pd 1a, Pt 1b, [Cu(Ph₂PNHCH₂‐C₄H₃S)₄]PF₆, 1c, and [M(Ph₂P)₂NCH₂‐C₄H₃S)Cl₂], M = Pd 2a, Pt 2b, {Cu[(Ph₂P)₂NCH₂‐C₄H₃S]₂}PF₆, 2c, respectively. The new compounds were isolated as analytically pure crystalline solids and characterized by ³¹P‐, ¹³C‐, ¹H‐NMR and IR spectroscopy and elemental analysis. Furthermore, the solid‐state molecular structures of representative palladium and platinum complexes of bis(phosphine)amine, 2a and 2b, respectively, were determined using single crystal X‐ray diffraction analysis. The palladium complexes were tested as potential catalysts in the Heck and Suzuki cross‐coupling reactions. Copyright © 2009 John Wiley & Sons, Ltd.