Gold(I)-catalyzed direct C-H arylation of pyrazine and pyridine with aryl bromides

An efficient procedure for the direct C-H arylation of electron-poor aromatics such as pyrazine and pyridine with aryl bomides is described. In the presence of catalytic amount of Cy₃PAuCl and with the use of t-BuOK as base, pyrazine undergoes the direct C-H arylation with aryl bromides at 100 °C, and the yields of the arylated products depend on the nature of aryl bromides. In the cases of electron-rich aryl bromides used, the arylated pyrazines can be obtained in good to high yields. For electron-poor aryl bromides, the addition of AgBF₄ is the crucial point to accelerate the coupling reaction to give the arylated products in moderate yields. Pyridine also reacts with electron-rich aryl bromides catalyzed by Cy₃PAuCl to give a mixture of arylated regioisomers in moderate yield. However, in order to realize the direct C-H arylation of pyridine with electron-poor aryl bromides, the addition of silver salt as additive and a milder reaction temperature (60 °C) are required.     

Palladium‐catalyzed selective decarboxylative coupling reaction versus direct C―H arylation for arylation of heteroaromatics

Conditions for selective palladium‐catalyzed decarboxylative 2‐arylation of 3‐substituted thiophene and furan derivatives bearing an ester at C2 position have been established. By using 2 mol% phosphine‐free Pd(OAc)₂ as the catalyst and a mixture of KOH and K₂CO₃ as the bases, in dimethylacetamide, moderate to good yields of the desired 2‐arylated products were obtained. A range of functional groups such as nitrile, nitro, formyl or acetyl on the aryl bromides was tolerated. This method allows us to employ in some cases more convenient reactants in terms of cost or physical properties (boiling point) for arylations. Copyright © 2013 John Wiley & Sons, Ltd.     

Direct catalytic C–H arylation of imidazo[1,2-a]pyridine with aryl bromides using magnetically recyclable Pd–Fe3O4 nanoparticles

The direct C–H arylation of a heteroarene with aryl bromides has been achieved under the catalysis of magnetic nanoparticles. In the presence of bimetallic Pd–Fe₃O₄ heterodimer nanocrystals (1 mol % in palladium), the reaction of imidazo[1,2-a]pyridine with various aryl bromides gives the corresponding arylated products with exclusive C3-selectivity. The highly regioselective method is applicable to a wide range of aryl bromides with varying electronic and steric properties. The Pd–Fe₃O₄ nanocrystals can be recoverable by simple magnetic separation and have been recycled ten times without loss of catalytic activity.     

Palladium(II)‐N‐Heterocyclic Carbene Complexes: Efficient Catalysts for the Direct C‐H Bond Arylation of Furans with Aryl Halides

This paper contains the synthesis and characterization of the seven new benzimidazolium salts and their corresponding new palladium(II)‐NHC complexes with the general formula [PdX₂(NHC)₂], (NHC = N‐heterocyclic carbene, X = Cl or Br), and also their catalytic activity in direct C‐H bond arylation of 2‐substituted furan derivatives with aryl bromides and aryl chlorides. Under the optimal conditions, these palladium(II)‐NHC complexes showed the good catalytic performance for the direct C‐H bond arylation of 2‐substituted furans with (hetero)aryl bromides, and with readily available and inexpensive aryl chlorides. The C‐H bond arylation regioselectively produced C5‐arylated furans by using 1 mol% of the palladium(II)‐NHC catalysts in moderate to high yields.     

Palladaphosphacyclobutenes as catalysts in Heck and Suzuki reactions

Heck reactions of aryl halides with various olefins and Suzuki reactions of aryl halides with phenylboronic acid catalyzed by palladaphosphacyclobutene have been investigated. The scope of the Heck reaction has been investigated in N,N‐dimethylacetamide at 140 °C using NaOAc as base. Using 0.1% molar ratio of palladaphosphacyclobuyenes, aryl bromides were converted into 1,2‐substitutedethene products in good to high yields through coupling with both vinylarenes and acrylates. Actived aryl chloride reacted with styrene to afford 1,2‐substitutedethene products in moderate yields. The scope of the Suzuki reaction has been conducted in toluene at 110 °C using Cs₂CO₃ as base. Using 0.1% molar ratio of palladaphosphacyclobutene, aryl bromides reacted with phenylboronic acid to afford diaryl derivatives in excellent yield. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation and Application of Solid,Salt‐Stabilized Zinc Amide Enolates with Enhanced Air and Moisture Stability

The treatment of various N‐morpholino amides with TMPZnCl⋅LiCl (TMP=2,2,6,6‐tetramethylpiperidyl) and Mg(OPiv)₂ in THF at 25 °C provides solid zinc enolates with enhanced air and moisture stability (t _1/2 in air: 1–3 h) after solvent evaporation. These enolates undergo Pd‐ and Cu‐catalyzed cross‐couplings with (hetero)aryl bromides as well as allylic and benzylic halides. The arylated N‐morpholino amides were converted into various ketones by LaCl₃⋅2 LiCl mediated acylation with Grignard reagents. The new, solid enolates were used to prepare a potent anti‐breast‐cancer drug candidate in six steps and 23 % overall yield.     

Reactivity of 4‐phenylthiazoles in ruthenium catalyzed direct arylations

The reactivity of the phenyl substituent of 4‐phenylthiazoles in Ru‐catalyzed direct arylation was studied. 4‐Phenylthiazole was found to be unreactive; whereas, the introduction of an aryl unit at C5‐position of 4‐phenylthiazole enhances its reactivity, allowing the selective mono‐arylation of the phenyl unit of 4‐phenylthiazoles in moderate to high yields using 5 mol% of [Ru(p‐cymene)Cl₂]₂ catalyst precursor associated to KOPiv as base. These results reveal that the conformation and electronic properties of 4‐phenylthiazoles are crucial to allow the formation of suitable intermediates in the course of the catalytic cycle. The reaction tolerated both electron‐rich and electron‐poor aryl bromides allowing the straightforward tuning of the electronic properties of the arylated 2‐methyl‐4‐phenyl‐5‐arylthiazoles.     

Programmed Site‐Selective Palladium‐Catalyzed Arylation of Thieno[3,2‐b]thiophene

Mono‐, di‐, tri‐, and tetraarylated thieno[3,2‐b ]thiophenes were synthesized by direct site‐selective Pd‐catalyzed C−H activation reactions with various aryl bromides in the presence of a phosphine‐free Pd(OAc)₂/KOAc catalyst system in N ,N ‐dimethylacetamide (DMAc). The arylation of 2‐arylthieno[3,2‐b ]thiophene took place at the C3 position if the 2‐aryl substituents possessed electron‐withdrawing groups and at the C5 position if they were bulky and possessed electron‐donating groups.     

Palladium-catalysed direct arylations of NH-free pyrrole and N-tosylpyrrole with aryl bromides

The palladium-catalysed direct coupling of aryl halides with pyrroles provides a greener access to arylated pyrroles than more classical couplings such as Suzuki, Stille or Negishi reactions. However, so far, NH-free pyrrole and N-tosylpyrrole gave disappointing results for such couplings either in terms of regioselectivity of the arylation, catalyst loading or substrate scope. The reactivity of both NH-free pyrrole and N-tosylpyrrole was studied, and the tosylated pyrrole led to higher yields of coupling products due to better conversions of the aryl bromides. A range of aryl bromides undergo regioselective coupling at C2 of N-tosylpyrrole in moderate to good yields using 1 mol % [Pd(Cl(C₃H₅)]₂ as the catalyst, KOAc as the base in DMAc.     

Palladium(II)‐Catalyzed Enantioselective Arylation of Unbiased Methylene C(sp3)−H Bonds Enabled by a 2‐Pyridinylisopropyl Auxiliary and Chiral Phosphoric Acids

Enantioselective functionalizations of unbiased methylene C(sp³)?H bonds of linear systems by metal insertion are intrinsically challenging and remain a largely unsolved problem. Herein, we report a palladium(II)‐catalyzed enantioselective arylation of unbiased methylene β‐C(sp³)?H bonds enabled by the combination of a strongly coordinating bidentate PIP auxiliary with a monodentate chiral phosphoric acid (CPA). The synergistic effect between the PIP auxiliary and the non‐C₂‐symmetric CPA is crucial for effective stereocontrol. A broad range of aliphatic carboxylic acids and aryl bromides can be used, providing β‐arylated aliphatic carboxylic acid derivatives in high yields (up to 96 %) with good enantioselectivities (up to 95:5 e.r.). Notably, this reaction also represents the first palladium(II)‐catalyzed enantioselective C?H activation with less reactive and cost‐effective aryl bromides as the arylating reagents. Mechanistic studies suggest that a single CPA is involved in the stereodetermining C?H palladation step.     

Pd‐NHC‐Catalyzed Direct Arylation of 1,4‐Disubstituted 1,2,3‐Triazoles with Aryl Halides

A highly efficient method for the synthesis of unsymmetrical multi‐substituted 1,2,3‐triazoles via a direct Pd‐NHC system catalyzed C(5)‐arylation of 1,4‐disubstituted triazoles, which are readily accessible via "click" chemistry has been developed. It is important to note that C? H bond functionalizations of 1,2,3‐triazoles with a variety of differently substituted aryl iodides and bromides as electrophiles can be conveniently achieved through this catalytic system at significantly milder reaction temperatures of 100°C under air.     

Palladium-catalyzed direct 5-arylation of formyl- or acetyl-halothiophene derivatives

Pd(OAc)₂ was found to catalyze the direct arylation of some functionalized halothiophene derivatives allowing the synthesis in only one step of polyfunctionalized arylated thiophenes. In the presence of 2-acetyl-3-chlorothiophene, 2-acetyl-4-chlorothiophene, 2-acetyl-3-bromothiophene diethylacetal or 2-(4-bromothiophen-2-yl)-[1,3]dioxolane, and a variety of aryl bromides, the 5-arylation products were obtained in moderate to high yields employing only 0.5 mol% catalyst. On the other hand, the use of 2-formyl-3-chlorothiophene, 2-acetyl-3-bromothiophene or 2-formyl-3-bromothiophene gave disappointing results.     

Highly efficient orthopalladated complexes of second and third benzyl amine for catalyzing the Suzuki cross‐coupling reaction

In this work, ortho‐palladated complexes [Pd(µ‐Cl)(C₆H₄CH₂ NRR′‐κ²‐C,N)]₂ and [Pd(C₆H₄CH₂NH₂‐2‐C,N)Cl(Y)] were tested in the Suzuki–Miyaura cross‐coupling reaction. Cyclopalladated Pd(II) complexes as thermally stable catalysts can activate aryl bromides and chlorides. These complexes were active and efficient catalysts for the Suzuki–Miyaura reaction of aryl bromides and even less reactive aryl chlorides. The cross‐coupled products of a variety of aryl bromides and aryl chloride with phenylboronic acid in methanol as solvent at 60 °C were produced in excellent yields. Copyright © 2010 John Wiley & Sons, Ltd.     

On the mechanism of the palladium-catalyzed β-arylation of ester enolates

The palladium‐catalyzed β‐arylation of ester enolates with aryl bromides was studied both experimentally and computationally. First, the effect of the ligand on the selectivity of the α/β‐arylation reactions of ortho‐ and meta‐fluorobromobenzene was described. Selective β‐arylation was observed for the reaction of o‐fluorobromobenzene with a range of biarylphosphine ligands, whereas α‐arylation was predominantly observed with m‐fluorobromobenzene for all ligands except DavePhos, which gave an approximate 1:1 mixture of α‐/β‐arylated products. Next, the effect of the substitution pattern of the aryl bromide reactant was studied with DavePhos as the ligand. We showed that electronic factors played a major role in the α/β‐arylation selectivity, with electron‐withdrawing substituents favoring β‐arylation. Kinetic and deuterium‐labeling experiments suggested that the rate‐limiting step of β‐arylation with DavePhos as the ligand was the palladium–enolate‐to‐homoenolate isomerization, which occurs by a β? H‐elimination, olefin‐rotation, and olefin‐insertion sequence. A dimeric oxidative‐addition complex, which was shown to be catalytically competent, was isolated and structurally characterized. A common mechanism for α‐ and β‐arylation was described by DFT calculations. With DavePhos as the ligand, the pathway leading to β‐arylation was kinetically favored over the pathway leading to α‐arylation, with the palladium–enolate‐to‐homoenolate isomerization being the rate‐limiting step of the β‐arylation pathway and the transition state for olefin insertion its highest point. The nature of the rate‐limiting step changed with PCy₃ and PtBu₃ ligands, and with the latter, α‐arylation became kinetically favored. The trend in selectivity observed experimentally with differently substituted aryl bromides agreed well with that observed from the calculations. The presence of electron‐withdrawing groups on these bromides mainly affected the α‐arylation pathway by disfavoring C? C reductive elimination. The higher activity of the ligands of the biaryldialkylphosphine ligands compared to their corresponding trialkylphosphines could be attributed to stabilizing interactions between the biaryl backbone of the ligands and the metal center, thereby preventing deactivation of the β‐arylation pathway.     

SBA‐15‐functionalized melamine–pyridine group‐supported palladium(0) as an efficient heterogeneous and recyclable nanocatalyst for N‐arylation of indoles through Ullmann‐type coupling reactions

SBA‐15‐functionalized melamine–pyridine group‐supported palladium(0) was found to serve as a heterogeneous and recyclable nanocatalyst for N‐arylation of indoles with aryl iodides under a low catalyst loading (0.3 mol% of Pd) through Ullmann‐type C? N coupling reactions. A variety of aryl iodides could be aminated to provide the N‐arylated products in good to excellent yields without the need of an inert atmosphere. Also, this catalyst was found to be an efficient system for the N‐arylation of other nitrogen‐containing heterocycles with aryl iodides. The heterogeneous palladium catalyst could be recovered by simple filtration of the reaction solution and reused for six cycles without significant loss in its activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Palladium‐Catalyzed Construction of Quaternary Stereocenters by Enantioselective Arylation of γ‐Lactams with Aryl Chlorides and Bromides

Herein, we report the first Pd‐catalyzed enantioselective arylation of α‐substituted γ‐lactams. Two sets of conditions were developed for this transformation, allowing for the use of either aryl chlorides or bromides as electrophiles. Utilizing a highly electron‐rich dialkylphosphine ligand we have been able to construct α‐quaternary centers in good yields (up to 91 % yield) and high enantioselectivities (up to 97 % ee).     

Diaryl Sulfoxides from Aryl Benzyl Sulfoxides: A Single Palladium‐Catalyzed Triple Relay Process

A novel approach to produce diaryl sulfoxides from aryl benzyl sulfoxides is reported. Optimization of the reaction conditions was performed using high‐throughput experimentation techniques. The [Pd(dba)₂]/NiXantPhos catalyst system successfully promotes a triple relay process involving sulfoxide α‐arylation, C? S bond cleavage, and C? S bond formation. The byproduct benzophenone is formed by an additional palladium‐catalyzed process. It is noteworthy that palladium‐catalyzed benzylative C? S bond cleavage of sulfoxides is unprecedented. A wide range of aryl benzyl sulfoxides, as well as alkyl benzyl sulfoxides with various (hetero)aryl bromides were employed in the triple relay process in good to excellent yields (85–99 %). Moreover, aryl methyl sulfoxides, dibenzyl sulfoxides, and dimethylsulfoxide could be utilized to generate diaryl sulfoxides involving multiple catalytic cycles by a single catalyst.     

Ammonium Chloride Promoted Palladium-Catalyzed UIImann Coupling of Aryl Bromide

In water, ammonium chloride was found to promote palladium-catalyzed Ullmann coupling reactions of aryl bromides. In the presence of Pd/C, zinc, NH4Cl, and water, coupling of various aryl bromides was carried out smoothly to afford the corresponding homocoupling products in moderate yields.     

Highly Efficient Synthesis of Arylpyrrole Derivatives via Rh(III)‐Catalyzed Direct CH Arylation with Aryl Boronic Acids

An efficient and facile method for synthesis of 2‐arylpyrroles through Rh(III)‐catalyzed direct C? H arylation with pyrrole derivatives and aryl boronic acids has been developed. This reaction could proceed under mild reaction conditions and afford a series of 2‐arylated products in good to excellent yields. The gram‐scale experiment has been conducted to demonstrate the synthetic potential of this methodology.     

Palladium‐Catalyzed Direct C2 Arylation of N‐Substituted Indoles with 1‐Aryltriazenes

A novel and efficient palladium‐catalyzed C2 arylation of N‐substituted indoles with 1‐aryltriazenes for the synthesis of 2‐arylindoles was developed. In the presence of BF₃ ? OEt₂ and palladium(II) acetate (Pd(OAc)₂), N‐substituted indoles reacted with 1‐aryltriazenes in N,N‐dimethylacetamide (DMAC) to afford the corresponding aryl–indole‐type products in good to excellent yields.