Graphitic Carbon Nitride/Nitrogen‐Rich Carbon Nanofibers: Highly Efficient Photocatalytic Hydrogen Evolution without Cocatalysts

An interconnected framework of mesoporous graphitic‐C₃N₄ nanofibers merged with in situ incorporated nitrogen‐rich carbon has been prepared. The unique composition and structure of the nanofibers as well as strong coupling between the components endow them with efficient light‐harvesting properties, improved charged separation, and a multidimensional electron transport path that enhance the performance of hydrogen production. The as‐obtained catalyst exhibits an extremely high hydrogen‐evolution rate of 16885 μmol h^?1 g^?1, and a remarkable apparent quantum efficiency of 14.3 % at 420 nm without any cocatalysts, which is much higher than most reported g‐C₃N₄‐based photocatalysts even in the presence of Pt‐based cocatalysts.     

氮掺杂石墨炭包覆的钴纳米催化剂作高效、高稳定性电催化制氢

电催化制氢是解决当前能源危机的重要手段之一。 研究高效稳定的非贵金属电催化剂是电催化制氢商业应用的重点。 本文通过直接高温热解双金属沸石咪唑骨架,制备了一种氮掺杂石墨炭(NC)包覆均匀分布的钴纳米颗粒电催化剂(V-Co@NC,这里V是vacancy缩写),前躯体中的Zn元素有效地防止钴纳米颗粒的聚集,并有助于生成均匀分布的钴纳米颗粒。 这种特殊的纳米结构可防止钴与电解液的直接接触,提升了其循环稳定性,同时,氮元素的掺杂提升了导电性,有利于电催化制氢性能的提升。 结果表明,所制备的V-Co@NC催化剂在酸性和碱性电解液中均具有良好的催化性能,且经过5000次循环测试后催化活性基本保持不变,具有良好的应用前景。为高活性和高选择性的电催化制氢催化剂的发展提供一种全新的途径。     

Synthesis of Silver Nanoparticles-Modified Graphitic Carbon Nitride Nanosheets for Highly Efficient Photocatalytic Hydrogen Peroxide Evolution

As a promising metal-free photocatalyst, graphitic carbon nitride (g-C₃N₄) is still limited by insufficient visible light absorption and rapid recombination of photogenerated carriers, resulting in low photocatalytic activity. Here, we adjusted the microstructure of the pristine bulk-g-C₃N₄ (PCN) and further loaded silver (Ag) nanoparticles. Abundant Ag nanoparticles were grown on the thin-layer g-C₃N₄ nanosheets (CNNS), and the Ag nanoparticles decorated g-C₃N₄ nanosheets (Ag@CNNS) were successfully synthesized. The thin-layer nanosheet-like structure was not only beneficial for the loading of Ag nanoparticles but also for the adsorption and activation of reactants via exposing more active sites. Moreover, the surface plasmon resonance (SPR) effect induced by Ag nanoparticles enhanced the absorption of visible light by narrowing the band gap of the substrate. Meanwhile, the composite band structure effectively promoted the separation and transfer of carriers. Benefiting from these merits, the Ag@CNNS reached a superior hydrogen peroxide (H₂O₂) yield of 120.53 μmol/g/h under visible light irradiation in pure water (about 8.0 times higher than that of PCN), significantly surpassing most previous reports. The design method of manipulating the microstructure of the catalyst combined with the modification of metal nanoparticles provides a new idea for the rational development and application of efficient photocatalysts.     

Graphitic Carbon Nitride Nanosheet–Carbon Nanotube Three‐Dimensional Porous Composites as High‐Performance Oxygen Evolution Electrocatalysts

A new class of highly efficient oxygen evolution catalysts has been synthesized through the self‐assembly of graphitic carbon nitride nanosheets and carbon nanotubes, driven by π–π stacking and electrostatic interactions. Remarkably, the catalysts exhibit higher catalytic oxygen evolution activity and stronger durability than Ir‐based noble‐metal catalysts and display the best performance among the reported nonmetal catalysts. This good result is attributed to the high nitrogen content and the efficient mass and charge transfer in the porous three‐dimensional nanostructure.     

Highly Efficient Photocatalytic H2 Evolution from Water using Visible Light and Structure‐Controlled Graphitic Carbon Nitride

The major challenge of photocatalytic water splitting, the prototypical reaction for the direct production of hydrogen by using solar energy, is to develop low‐cost yet highly efficient and stable semiconductor photocatalysts. Herein, an effective strategy for synthesizing extremely active graphitic carbon nitride (g‐C₃N₄) from a low‐cost precursor, urea, is reported. The g‐C₃N₄ exhibits an extraordinary hydrogen‐evolution rate (ca. 20 000 μmol h^?1 g^?1 under full arc), which leads to a high turnover number (TON) of over 641 after 6 h. The reaction proceeds for more than 30 h without activity loss and results in an internal quantum yield of 26.5 % under visible light, which is nearly an order of magnitude higher than that observed for any other existing g‐C₃N₄ photocatalysts. Furthermore, it was found by experimental analysis and DFT calculations that as the degree of polymerization increases and the proton concentration decreases, the hydrogen‐evolution rate is significantly enhanced.     

MoS2 Nanosheets Supported on 3D Graphene Aerogel as a Highly Efficient Catalyst for Hydrogen Evolution

The development of efficient catalysts for electrochemical hydrogen evolution is essential for energy conversion technologies. Molybdenum disulfide (MoS₂) has emerged as a promising electrocatalyst for hydrogen evolution reaction, and its performance greatly depends on its exposed edge sites and conductivity. Layered MoS₂ nanosheets supported on a 3D graphene aerogel network (GA‐MoS₂) exhibit significant catalytic activity in hydrogen evolution. The GA‐MoS₂ composite displays a unique 3D architecture with large active surface areas, leading to high catalytic performance with low overpotential, high current density, and good stability.     

石墨相氮化碳纳米管的合成及光催化产氢性能

通过硬模板法,采用氰胺前驱物和二氧化硅纳米管(SiO₂-NTs)模板,合成石墨相氮化碳纳米管(CN-NTs)光催化剂。采用扫描电镜(SEM)、透射电镜(TEM)、X射线粉末衍射(XRD)、傅立叶变换红外光谱(FT-IR)、氮气吸附/脱附测试、紫外可见漫反射光谱(UV-Vis DRS)、荧光光谱、热重分析(TGA)等手段对CN-NTs催化剂的结构与性能进行表征。结果表明,CN-NTs的化学组成是石墨相氮化碳(g-C₃N₄),形貌为均匀的纳米管,且是介孔材料。与体相氮化碳(B-CN)和介孔石墨相氮化碳(mpg-CN)相比,CN-NTs的光吸收带边蓝移到440 nm,荧光发射谱的峰强减弱。在可见光(λ>420 nm)照射下,CN-NTs具有较高的光催化分解水活性,产氢速率为58 μmol/h,且表现出良好的光催化活性稳定性和化学结构稳定性。研究结果表明纳米管状结构能有效促进g-C₃N₄半导体激子解离,提高光生电子-空穴的分离效率,进而显著优化g-C₃N₄的光催化产氢性能。     

Porous Molybdenum‐Based Hybrid Catalysts for Highly Efficient Hydrogen Evolution

We have synthesized a porous Mo‐based composite obtained from a polyoxometalate‐based metal–organic framework and graphene oxide (POMOFs/GO) using a simple one‐pot method. The MoO₂@PC‐RGO hybrid material derived from the POMOFs/GO composite is prepared at a relatively low carbonization temperature, which presents a superior activity for the hydrogen‐evolution reaction (HER) in acidic media owing to the synergistic effects among highly dispersive MoO₂ particles, phosphorus‐doped porous carbon, and RGO substrates. MoO₂@PC‐RGO exhibits a very positive onset potential close to that of 20 % Pt/C, low Tafel slope of 41 mV dec^?1, high exchange current density of 4.8×10^?4 A cm^?2, and remarkable long‐term cycle stability. It is one of the best high‐performance catalysts among the reported nonprecious metal catalysts for HER to date.     

泡沫状氮化碳的制备及其可见光分解水产氢性能

以三聚氰胺为前驱体,价格低廉、来源广泛的海泡石作为硬模板,制备出具有特殊空腔结构的泡沫状氮化碳。 通过透射电子显微镜、X射线粉末衍射、傅里叶变换红外光谱、N₂吸附-脱附、紫外可见漫反射光谱及荧光光谱等手段对样品的表面形貌和结构等物理性质进行表征,以光解水产氢性能考察其光催化活性,并通过电化学测试手段考察其光生电荷传输和分离情况。 结果表明,聚多巴胺能起到粘接剂作用,改善了前驱体与模板的结合,制备出的泡沫状氮化碳具有更大的比表面积;随模板用量增加,氮化碳的比表面积增大,当聚多巴胺改性海泡石与三聚氰胺质量比为2:1时,泡沬状氮化碳比表面积可达389.2 m²/g,其可见光产氢速率约为1061.87 μmol/(g·h),较体相氮化碳和未经多巴胺改性海泡石制备的氮化碳分别提高了7和2.6倍。 这表明大比表面积的泡沫状氮化碳为光催化反应提供了更多的活性位点,改善了多相光催化反应的传质扩散过程,提高了光生电子-空穴的分离效率,其特殊的空腔结构能有效地提高光的利用率,从而提高其光催化活性。     

Distance Synergy of MoS2‐Confined Rhodium Atoms for Highly Efficient Hydrogen Evolution

Perturbing the electronic structure of the MoS₂ basal plane by confining heteroatoms offers the opportunity to trigger in‐plane activity for the hydrogen evolution reaction (HER). The key challenge consists of inducing the optimum HER activity by controlling the type and distribution of confined atoms. A distance synergy of MoS₂‐confined single‐atom rhodium is presented, leading to an ultra‐high HER activity at the in‐plane S sites adjacent to the rhodium. By optimizing the distance between the confined Rh atoms, an ultra‐low overpotential of 67 mV is achieved at a current density of 10 mA cm^?2 in acidic solution. Experiments and first‐principles calculations demonstrate a unique distance synergy between the confined rhodium atoms in tuning the reactivity of neighboring in‐plane S atoms, which presents a volcanic trend with the inter‐rhodium distance. This study provides a new strategy to tailor the activity of MoS₂ surface via modulating the distance between confined single atoms.     

Phosphorus‐Modified Tungsten Nitride/Reduced Graphene Oxide as a High‐Performance,Non‐Noble‐Metal Electrocatalyst for the Hydrogen Evolution Reaction

Phosphorus‐modified tungsten nitride/reduced graphene oxide (P‐WN/rGO) is designed as a high‐efficient, low‐cost electrocatalyst for the hydrogen evolution reaction (HER). WN (ca. 3 nm in size) on rGO is first synthesized by using the H₃[PO₄(W₃O₉)₄] cluster as a W source. Followed by phosphorization, the particle size increase slightly to about 4 nm with a P content of 2.52 at %. The interaction of P with rGO and WN results in an obvious increase of work function, being close to Pt metal. The P‐WN/rGO exhibits low onset overpotential of 46 mV, Tafel slope of 54 mV dec^?1, and a large exchange current density of 0.35 mA cm^?2 in acid media. It requires overpotential of only 85 mV at current density of 10 mA cm^?2, while remaining good stability in accelerated durability testing. This work shows that the modification with a second anion is powerful way to design new catalysts for HER.     

Enhanced Electron Penetration through an Ultrathin Graphene Layer for Highly Efficient Catalysis of the Hydrogen Evolution Reaction

Major challenges encountered when trying to replace precious‐metal‐based electrocatalysts of the hydrogen evolution reaction (HER) in acidic media are related to the low efficiency and stability of non‐precious‐metal compounds. Therefore, new concepts and strategies have to be devised to develop electrocatalysts that are based on earth‐abundant materials. Herein, we report a hierarchical architecture that consists of ultrathin graphene shells (only 1–3 layers) that encapsulate a uniform CoNi nanoalloy to enhance its HER performance in acidic media. The optimized catalyst exhibits high stability and activity with an onset overpotential of almost zero versus the reversible hydrogen electrode (RHE) and an overpotential of only 142 mV at 10 mA cm^?2, which is quite close to that of commercial 40 % Pt/C catalysts. Density functional theory (DFT) calculations indicate that the ultrathin graphene shells strongly promote electron penetration from the CoNi nanoalloy to the graphene surface. With nitrogen dopants, they synergistically increase the electron density on the graphene surface, which results in superior HER activity on the graphene shells.     

钴、碳共掺杂氮化碳的制备及其光催化分解水产氢性能

针对氮化碳可见光利用率低和在光催化过程中光生电子与空穴易于复合的缺点,通过钴、碳共掺杂提升其光催化性能。以尿素为前驱体,维生素B12（VB12）为钴源和碳源,将二者的混合物进行一步煅烧,制备钴、碳共掺杂氮化碳（CNCoC）。结果表明,钴、碳共掺杂对氮化碳的微观形貌、骨架结构和官能团都没有造成明显影响;但是增大了产物的比表面积,调节了产物的能带结构,增加了其对可见光的吸收。更重要的是,相比于单一元素碳的掺杂,钴、碳共掺杂具有协同作用,能够更有效地提升光生电子和空穴的分离和传递效率。因此,加入6 mg VB12制备的CNCoC-6的可见光光催化分解水产氢速率达到了56.1 μmol·h^-1,是纯氮化碳（CN）的3.05倍;而碳掺杂氮化碳（CNC-6）的产氢速率仅为CN的2.55倍。     

Electrochemistry of Layered Graphitic Carbon Nitride Synthesised from Various Precursors: Searching for Catalytic Effects

Graphitic carbon nitride (g‐C₃N₄), synthesised by pyrolysis of different precursors (dicyandiamide, melamine and urea) under varying reaction conditions (air and nitrogen gas) is subjected to electrochemical studies for the elucidation of the inherent catalytic efficiency of the pristine material. Contrary to popular belief, pristine g‐C₃N₄ shows negligible, if any, enhancement in its electrochemical behaviour in this comprehensive study. Voltammetric analysis reveals g‐C₃N₄ to display similar catalytic efficiency to the unmodified glassy carbon electrode surface on which the bulk material was deposited. This highlights the non‐catalytic nature of the pristine material and challenges the feasibility of using g‐C₃N₄ as a heterogeneous catalyst to deliver numerous promised applications.     

PtNi Alloy Coated in Porous Nitrogen-Doped Carbon as Highly Efficient Catalysts for Hydrogen Evolution Reactions

The development of low platinum loading hydrogen evolution reaction (HER) catalysts with high activity and stability is of great significance to the practical application of hydrogen energy. This paper reports a simple method to synthesize a highly efficient HER catalyst through coating a highly dispersed PtNi alloy on porous nitrogen-doped carbon (MNC) derived from the zeolite imidazolate skeleton. The catalyst is characterized and analyzed by physical characterization methods, such as XRD, SEM, TEM, BET, XPS, and LSV, EIS, it, v-t, etc. The optimized sample exhibits an overpotential of only 26 mV at a current density of 10 mA cm⁻², outperforming commercial 20 wt% Pt/C (33 mV). The synthesized catalyst shows a relatively fast HER kinetics as evidenced by the small Tafel slope of 21.5 mV dec⁻¹ due to the small charge transfer resistance, the alloying effect between Pt and Ni, and the interaction between PtNi alloy and carrier.     

Large‐Area,Free‐Standing,Two‐Dimensional Supramolecular Polymer Single‐Layer Sheets for Highly Efficient Electrocatalytic Hydrogen Evolution

The rational construction of covalent or noncovalent organic two‐dimensional nanosheets is a fascinating target because of their promising applications in electronics, membrane technology, catalysis, sensing, and energy technologies. Herein, a large‐area (square millimeters) and free‐standing 2D supramolecular polymer (2DSP) single‐layer sheet (0.7–0.9 nm in thickness), comprising triphenylene‐fused nickel bis(dithiolene) complexes has been readily prepared by using the Langmuir–Blodgett method. Such 2DSPs exhibit excellent electrocatalytic activities for hydrogen generation from water with a Tafel slope of 80.5 mV decade^?1 and an overpotential of 333 mV at 10 mA cm^?2, which are superior to that of recently reported carbon nanotube supported molecular catalysts and heteroatom‐doped graphene catalysts. This work is promising for the development of novel free‐standing organic 2D materials for energy technologies.     

Stress‐Transfer‐Induced In Situ Formation of Ultrathin Nickel Phosphide Nanosheets for Efficient Hydrogen Evolution

Ultrathin two‐dimensional (2D) nanostructures have attracted increasing research interest for energy storage and conversion. However, tackling the key problem of lattice mismatch inducing the instability of ulreathin nanostructures during phase transformations is still a critical challenge. Herein, we describe a facile and scalable strategy for the growth of ultrathin nickel phosphide (Ni₂P) nanosheets (NSs) with exposed (001) facets. We show that single‐layer functionalized graphene with residual oxygen‐containing groups and a large lateral size contributes to reducing the lattice strain during phosphorization. The resulting nanostructure exhibits remarkable hydrogen evolution activity and good stability under alkaline conditions.     

Three‐Dimensional Graphene Networks with Abundant Sharp Edge Sites for Efficient Electrocatalytic Hydrogen Evolution

To achieve sustainable production of hydrogen (H₂) through water splitting, establishing efficient and earth‐abundant electrocatalysts is of great necessity. Morphology engineering of graphene is now shown to modulate the electronic structure of carbon skeleton and in turn endow it with excellent ability of proton reduction. Three‐dimensional (3D) graphene networks with a high density of sharp edge sites are synthesized. Electrocatalytic measurements indicate that the obtained 3D graphene networks can electrocatalyze H₂ evolution with an extremely low onset potential of about 18 mV in 0.5 m H₂SO₄ solution, together with good stability. A combination of control experiments and density functional theory (DFT) investigations indicates that the exceptional H₂ evolution performance is attributed to the abundant sharp edge sites of the advanced frameworks, which are responsible for promoting the adsorption and reduction of protons.