Effects of tertiary amines and quaternary ammonium halides in polysulfone on membrane gas separation properties

Polymers containing CO₂‐philic groups are of great interest for CO₂/light gas separation membranes because the affinity toward CO₂ can effectively increase CO₂ solubility and thus permeability. In this study, polysulfones (PSUs) modified with different degrees of benzyldimethylamine (DMA), benzyltrimethylammonium fluoride (TMAF), and benzyltrimethylammonium iodide (TMAI) were synthesized using sequential post‐functionalization reactions and investigated for CO₂/N₂ and CO₂/CH₄ separation. The physical properties of these polymers were studied, including density, fractional free volume, and glass transition temperature. In contrast to the conventional wisdom that tertiary amines exhibit an affinity toward CO₂, this study convincingly shows that the DMA substituent has a minimal impact on CO₂ solubility and CO₂/light gas solubility selectivity in PSUs under dry condition. On the other hand, incorporating TMAF and TMAI in PSU significantly increases CO₂ solubility. Particularly, introducing TMAI with a molar ratio of 1.07 relative to PSU repeating units increases CO₂/CH₄ solubility from 4.4 to 5.2, CO₂/CH₄ permeability selectivity from 21 to 45, and CO₂/N₂ permeability selectivity from 24 to 33 at 35 °C, while the CO₂ permeability decreases from 5.6 to 1.7 Barrers. The effect of these functional groups in PSUs on gas diffusivity and diffusivity selectivity can be satisfactorily described by the free volume model. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1239–1250     

Palladium‐catalyzed carbonylation of primary amines in supercritical carbon dioxide

The chemoselectivity of the palladium‐catalyzed carbonylation of amines was affected by the addition of MeOH in supercritical carbon dioxide. The results show different selectivity in supercritical carbon dioxide CO₂(sc) from that in alcohol. Methyl carbamate and its derivatives were obtained in high yields in CO₂(sc).     

Palladium‐Catalyzed Aminocarbonylation of Allylic Alcohols

A benign and efficient palladium‐catalyzed aminocarbonylation reaction of allylic alcohols is presented. The generality of this novel process is demonstrated by the synthesis of β,γ‐unsaturated amides including aliphatic, cinnamyl, and terpene derivatives. The choice of ligand is crucial for optimal carbonylation processes: Whereas in most cases the combination of PdCl₂ with Xantphos ( L6 ) gave best results, sterically hindered substrates performed better in the presence of simple triphenylphosphine ( L10 ), and primary anilines gave the best results using cataCXium® PCy ( L8 ). The reactivity of the respective catalyst system is significantly enhanced by addition of small amounts of water. Mechanistic studies and control experiments revealed a tandem allylic alcohol amination/C?N bond carbonylation reaction sequence.     

NHC‐Pd complex‐catalyzed double carbonylation of aryl iodides with secondary amines to α‐keto amides

A series of palladium–NHC compounds were prepared and their catalytic activity in the double carbonylation of aryl iodides to synthesize α‐keto amides were examined. Palladium complexes bearing mixed NHC–phosphine exhibited high efficiency for the double carbonylation reaction. The effects of different solvents, base, temperature, carbon monoxide (CO), pressure, various amine and aryl iodides were investigated. Both electron‐rich and electron‐deficient aryl iodides afforded the corresponding substituted α‐keto amides in moderate to good yields. A possible mechanism was also proposed. Copyright © 2013 John Wiley & Sons, Ltd.     

Novel ions of quaternary ammonium halides in FDMS

Field desorption mass spectrometry exhibited novel ions [ Y-n H+n R ]+and [ Y-nH+nX]+as well as cluster ions [nY+(n-1)X-mH+mR]+and [nY+( n-1)X-mH+mX]+(n,m=0-3; X and Y represent the cation and anion moieties of quaternary ammonium halides),whose formation mechanism was discussed.     

钯催化带有酮或醛的芳基三氟甲磺酸酯与胺或酰胺的取代反应

各种含有酮或醛的芳基三氟甲磺酸酯在催化量的钯和膦配体的存在下与胺或酰胺发生取代反应。BINAP为配体对仲胺效果最好,MOP-型配体对伯胺和少量仲胺效果较好,Xantphos 对伯酰胺和环状仲酰胺效果好。脂肪族的仲酰胺作为亲核试剂没有得到好的结果。     

Mild and efficient Pd(PtBu3)2‐catalyzed aminocarbonylation of aryl halides to aryl amides with high selectivity

This work describes a mild and efficient approach for the synthesis of aryl amides via catalytic aminocarbonylation of aryl halides with alicyclic amines using a Pd(P^t Bu₃)₂/NH₄Cl catalyst system. Under mild reaction temperature of 60°C and balloon pressure of CO, 5 mol% Pd(P^t Bu₃)₂ with a cheap NH₄Cl promoter is sufficient for high yields of aryl amides. The influence of reaction parameters such as reaction temperature, ligand type and promoter on catalytic activity was investigated. This work also discusses the catalytic intermediates in detail, and provides a plausible mechanism based on an acid chloride intermediate.     

Palladium‐catalysed Suzuki cross‐coupling of primary alkylboronic acids with alkenyl halides

The Suzuki reaction of primary alkylboronic acids with alkenyl halides proceeds nicely using the air‐stable catalyst PdCl(C₃H₅)(dppb), Cs₂CO₃ as base and toluene or xylene as solvent. A minor effect of the substituent position of the alkenyl bromide was observed. Quite similar yields were observed in the presence of α‐ or β‐substituted alkenyl bromides such as 2‐bromobut‐1‐ene or 1‐bromo‐2‐methylprop‐1‐ene with this catalyst. This reaction proceeded with a variety of alkylboronic acids such as 2‐phenylethylboronic acid or n‐octylboronic acid. Lower yields of coupling products were obtained in the presence of an alkenyl chloride. Copyright © 2008 John Wiley & Sons, Ltd.     

Palladium‐catalysed reductive carbonylation of aryl halides with iron pentacarbonyl for synthesis of aromatic aldehydes and deuterated aldehydes

The first use of iron pentacarbonyl is described for the novel and efficient conversion of aryl iodides, bromides and chlorides into their corresponding aryl aldehydes and/or aryl deuterated aldehydes. The reaction is catalysed with Pd(0) in aqueous N,N‐dimethylformamide at atmospheric pressure. In this protocol, neither gaseous hydrogen nor any reducing agent is required for the formation of the carbonylated product. The reaction can be performed without a P(III) ligand for aryl iodides; however, employing a P(III) ligand is necessary to perform the reaction with aryl bromides and chlorides. Copyright © 2015 John Wiley & Sons, Ltd.     

Pd/C: An efficient and reusable catalyst for the synthesis of flavones via carbonylation of aryl halides

This work describes an efficient and mild approach for the synthesis of flavones via catalytic carbonylation of aryl halides with 2‐hydroxyacetophenone using the commercial Pd/C as an efficient, heterogeneous and recyclable catalyst. Under balloon pressure of CO, 0.6 mol% Pd/C is sufficient for moderate yields of flavones for the carbonylation of aryl iodides under phosphine‐free conditions and aryl bromides in the presence of phosphine ligand. The catalyst is easily separable and shows significant recyclability. Moreover, the reaction mechanism was discussed, and a possible mechanism that contains two different cyclisation pathways was proposed.     

Palladium‐Catalyzed Regioselective C‐Benzylation via a Rearrangement Reaction: Access to Benzyl‐Substituted Anilines

An unprecedented C‐benzylation rearrangement reaction, catalyzed by palladium, is reported. The reaction proceeds by rearrangement leading to the direct synthesis of para or ortho benzyl‐substituted N‐methylanilines. The product is obtained in high regioselectivity, without the need to use a ligand for the catalytic process.     

Synthesis of multi‐functionalized carbonyl compounds by palladium–catalysed γ‐substitution of MBH adducts with activated amides

Catalytic allylic γ‐substitution with Morita‐Baylis‐Hillman (MBH) adducts for creating a new family of unsymmetrical dicarbonyl compounds was presented in this work, in which a variety of allylated amide products were achieved in good yields and high regioselectivity with excellent linear‐to‐branched ratios. Especially, it was found that the Pd/HZNU‐Phos complex exhibited remarkably high activity (with a TON up to 16800) in this transformation between dicarbonyl amides and MBH adducts. In addition, the possibly multisite interaction between multifunctional Pd/HZNU‐Phos catalyst system and substrates might responsible for its exceptionally high efficiency in this reaction.     

Cationic palladium complex‐catalyzed carbonylation of 2,3‐dien‐1‐ols to 1,3‐diene‐2‐carboxylic acids and esters under mild conditions

A cationic palladium complex, [Pd(PPh₃)₂(MeCN)₂](BF₄)₂, catalyzed the carbonylation of 2,3‐dien‐1‐ols under mild conditions. The dienols bearing two or more alkyl substituents on the diene part afforded 1,3‐diene‐2‐carboxylic acids successfully in tetrahydrofuran (THF), while those possessing one or no alkyl substituent gave polymers of the products exclusively. The former afforded the corresponding methyl esters in good yields when the reactions were carried out in methanol, while the latter afforded mainly the Diels–Alder reaction products of the resulting esters. An alkylidene group‐substituted π‐allylpalladium species has been presumed to be an intermediate. Copyright © 2000 John Wiley & Sons, Ltd.     

Palladium‐catalyzed unstrained C(sp3)―N bond activation: the synthesis of N,N‐dimethylacetamide by carbonylation of trimethylamine

This work describes a highly efficient unstrained C(sp³)―N bond activation approach for synthesis of N,N‐dimethylacetamide (DMAc) via catalytic carbonylation of trimethylamine using a PdCl₂/bipy (bipy = 2,2′‐bipyridine)/Me₄NI catalyst system. A low Pd catalyst dosage (1.0 mol%) is sufficient for high selectivity (98.1%) and yield (90.8%), with a turnover number (TON) of 90.0 mmol of DMAc obtained per mmol of PdCl₂ employed under mild reaction conditions. The influence of reaction parameters such as catalyst precursor dosage, ligand type and promoter on activity is investigated. This work also discusses in detail the halide promoter's role in the reaction, and provides a plausible mechanism based on the intermediates methyl iodide and acetyl iodide. Analyses indicate that the carbonylation of trimethylamine may proceed through an active intermediate acetyl iodide formed by carbonylation of methyl iodide generated from the decomposition of the promoter Me₄NI under reaction conditions. The formation of acetyl iodide favors the cleaving efficiency of the inert unstrained C(sp³)―N bond of trimethylamine. Copyright © 2013 John Wiley & Sons, Ltd.     

Antibacterial poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) fibrous membranes containing quaternary ammonium salts

In this study, antimicrobial membranes based on biodegradable material poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐4HB)] and quaternary ammonium salts (QASs) by two methods have been performed. Three QASs with varied alkyl chain lengths have been synthesized successfully and characterized by ¹H nuclear magnetic resonance and Fourier transform infrared. The synthesized QASs were blended with P(3HB‐4HB) and electrospun into composite fibrous membranes or casted into conventional membranes. Electrospun fibrous membranes with large surface areas are a superior type of antimicrobial biomaterials, and they exhibit preferable properties than solution casting membranes. Specifically, electrospun fibrous membranes are tougher and can inactivate both Gram‐positive Staphylococcus aureus and Gram‐negative Escherichia coli O157:H7 in a contact time of 30 min, whereas the solution casting membranes cannot. The length of alkyl chain in the quaternary ammonium groups on the modified P(3HB‐4HB) membranes is able to influence the antimicrobial activity. This type of antimicrobial material may have potential applications in biomaterial field. Copyright © 2016 John Wiley & Sons, Ltd.     

Palladium‐catalyzed three‐component cyclization of 2‐bromocyclohex‐1‐enecarboxylic acids with carbon monoxide and arylhydrazines leading to 2‐anilinohydroisoindoline‐1,3‐diones

2‐Bromocyclohex‐1‐enecarboxylic acids are carbonylatively cyclized with arylhydrazines or their hydrochlorides in tetrahydrofuran at 120 °C under carbon monoxide pressure in the presence of a catalytic amount of PdCl₂ and 1,3‐bis(diphenylphosphino)propane along with Et₃N to give 2‐anilinohydroisoindoline‐1,3‐diones. Copyright © 2015 John Wiley & Sons, Ltd.     

Palladium‐Catalyzed Enantioselective Heck Carbonylation with a Monodentate Phosphoramidite Ligand: Asymmetric Synthesis of (+)‐Physostigmine, (+)‐Physovenine,and (+)‐Folicanthine

Reported herein is the development of the first enantioselective monodentate ligand assisted Pd‐catalyzed domino Heck carbonylation reaction with CO. The highly enantioselective domino Heck carbonylation of N‐aryl acrylamides and various nucleophiles, including arylboronic acids, anilines, and alcohols, in the presence of CO was achieved. A novel monodentate phosphoramidite ligand, Xida‐Phos, has been developed for this reaction and it displays excellent reactivity and enantioselectivity. The reaction employs readily available starting materials, tolerates a wide range of functional groups, and provides straightforward access to a diverse array of enantioenriched oxindoles having β‐carbonyl‐substituted all‐carbon quaternary stereocenters, thus providing a facile and complementary method for the asymmetric synthesis of bioactive hexahydropyrroloindole and its dimeric alkaloids.     

Palladium bis(2,2,6,6‐tetramethyl‐3,5‐heptanedionate) catalyzed alkoxycarbonylation and aminocarbonylation reactions

Palladium bis(2,2,6,6‐tetramethyl‐3,5‐heptanedionate), a structurally well defined O‐containing transition metal complex, is reported to be an efficient catalyst for alkoxycarbonylation and aminocarbonylation reactions under milder operating conditions. The system tolerated the carbonylative coupling of various aryl halides with phenol/alcohol and amines, providing good to excellent yields of desired products under optimized reaction conditions. Copyright © 2009 John Wiley & Sons, Ltd.     

Carbonylative Suzuki coupling and alkoxycarbonylation of aryl halides using palladium supported on phosphorus‐doped porous organic polymer as an active and robust catalyst

Developing highly active catalysts with the combined advantages of molecular and solid catalysis is considered as the “Holy Grail” in the area of catalysis research. Herein, a phosphorus‐doped porous polymer‐immobilized palladium was successfully developed as an efficient, robust, and recyclable catalyst for the carbonylative Suzuki coupling and alkoxycarbonylation reactions of aryl halides. Rather than just as an immobilizing molecular catalyst, palladium supported on phosphorus‐doped porous organic polymer exhibits even better catalytic performances than that of its analogue homogeneous catalysts in both carbonylation reactions. Moreover, the catalyst can be easily separated and reused for at least 5 times without significant loss in reactivity. Importantly, the catalyst was highly stable under carbonylation reaction conditions, and no palladium nanoparticle was observed even after the 5th reuse.     

Fluoride effect on the palladium–phenanthroline catalyzed carbonylation of nitroarenes to carbamates

Fluorides promote the palladium–phenanthroline catalyzed carbonylation of nitroarenes to carbamates. The effect is more evident on the rate of the reaction at short reaction times, but a positive effect on selectivity is also observed under certain conditions. The effect is observed even under conditions under which chloride inhibits the reaction. Tetraethylammonium is a better countercation than sodium. Copyright © 2007 John Wiley & Sons, Ltd.