The Proton NMR and Structures of Dimethyl and Diethyl Dichalcogenides

The proton NMR spectra of dimethyl dichalcogenides and diethyl dichalcogenides were measured. The experimental results do not show the evidence for the existence of rotational isomerism in each molecules.     

飞机跑道胶痕的自动识别系统设计与实现

为了减轻机场跑道除胶工作人员的劳动强度,提高除胶工作效率,文章提出了一种基于机器视觉的胶痕自动查找和识别方法,设计了基于ARM单片机控制的图像无线采集和基于PC机控制的图像接收、图像预处理和图像识别系统。文章通过分析预处理后的数据特点,确定了基于细胞神经网络算法的胶痕识别算法,然后在MATLAB仿真环境下确定了该算法的最优模型和参数,最后在Visual C++ 6.0环境下完成了该算法的程序编译,调试并完成了对胶痕的自动识别过程。理论仿真和程序测试的结果证明了文章提出的方法在胶痕自动识别系统中的可行性,也为机场特种设备的无人化和智能化提供了参考。     

The Raman and Infrared Spectra and Structures of Ethyl Chloride,Bromide and Iodide

The Raman, infrared and proton NMR spectra of the liquid molecules, C₂H₅-X(X[dbnd]Cl, Br, I) have been recorded. And the molecular structures have been studied on the basis of these spectra. Consequently a non-rigid structure in which a CH₂ group rotates freely with respect to the three hydrogen atoms of CH₃ group is established.     

Crystallization of amorphous FeNiZrB and FeNiCoZrB alloys

Solid xenon layers are proposed as an alternative to graphite catchers for collecting samples at on-line separators. The formation of solid xenon layers is described. Sample atoms of bismuth have been held for up to a day in such layers before being released as cold free atoms for laser spectroscopy measurement. An application to studying daughter nuclei produced by α-decay is considered. It involves a two-stage process where daughter recoils are first accumulated in the xenon layer and subsequently released into flowing helium for laser-ionization and counting.     

相变存储材料Ge1Sb2Te4和Ge2Sb2Te5薄膜的结构和电学特性研究

采用射频磁控溅射方法制备了两种用于相变存储器的Ge₁Sb₂Te₄和Ge₂Sb₂Te₅相变薄膜材料,对其结构、电学输运性质和恒温下电阻随时间的变化关系进行了比较和分析.X射线衍射(XRD)和原子力显微镜(AFM)的结果表明:随着退火温度的升高,Ge₁Sb₂Te₄薄膜逐步晶化,由非晶态转变为多晶态,表面出现均匀的、 关键词： 硫系相变材料 1Sb₂Te₄')" href="#">Ge₁Sb₂Te₄ 2Sb₂Te₅')" href="#">Ge₂Sb₂Te₅     

Investigations of oxide superconductors by x-ray absorption,photoemission and cognate spectroscopies

X-ray absorption spectra, X-ray photoelectron spectra and Auger spectra of cuprate superconductors are discussed. The studies establish the absence of Cu³⁺ for all practical purposes, but point out the importance of oxygen holes. X-ray photoelectron spectra of BaBi_0.25Pb_0.75O₃ and related compounds are also examined.     

First-principles studies of the structural,electronic and optical properties of Zn1−xCdxS and ZnS1−ySey alloys

Using the density functional theory calculations, we studied the structural, electronic and optical properties of zincblende Zn_1?xCd_xS and ZnS_1?ySe_y alloys. Calculated structures and band gaps of these alloys are in good agreement with available experimental and other theoretical values. Present results show that the prominent peaks of the dielectric functions and absorption coefficients have a slight red shift and the amplitudes become larger with the increasing concentration of Cd and Se. Moreover, present findings predict that Zn_1?xCd_xS and ZnS_1?ySe_y alloys are promising for solar cells and photoconductor and electroluminescent devices due to their high absorption of solar radiations and photoconductivity in the energy region from visible light to ultraviolet.     

Calculated Vibrational Frequencies of PMo12O40 3- and its Fragments

Calculated vibrational frequencies are reported for the PMo₁₂O₄₀ ^3– ion according to a 53-atomic tetrahedral model (T_d). The results are compared with calculated frequencies for fragments of this structure, viz. PO₄ (T_d), Mo₃O₁₃ (C_3v), Mo₃O₇ (C_3v, Mo₂O₁₁ (C_s) and Mo₂O₁₀ (C_s).

A complete vibrational analysis of the PMo₁₂O₄₀ ^3– ion has been performed. The adopted model of T_d symmetry is an idealization of x-ray structure data. 1 The normal modes of vibration according to this model are distributed as:     

Raman and Infrared Spectra of Matrix Isolated CO2 and CS2

The matrix isolation infrared and Raman spectra of CO₂ and CS₂ in solid krypton at 20°K are reported. The fundamental frequencies are only very slightly red-shifted from the free gas values. Isotopic effects are found in both infrared and Raman spectra, whereas site splittings are evident in the infrared only.     

Combustion synthesis of a nanoceramic and its transparent properties

La_0.1Nd_0.1Y_1.8O₃ transparent ceramics nanopowders were prepared using the combustion synthesis. To achieve such transparent ceramics, Y₂O₃ were used as matrix materials and La³⁺ and Nd³⁺ were used as dopants, polyethyleneglycol (PEG) as dispersants for the sintering under vacuum 10⁻³ Pa and 1600 °C for 6 h. The precursor and powders calcined at different temperatures were characterized using TG-DTA, XRD, BET and FESEM. The transmittance of the transparent ceramics was measured using the sub-photometer. Results showed that La³⁺ and Nd³⁺ were completely dissolved into the cubic lattice of Y₂O₃. The sizes of Y_1.8La_0.1Nd_0.1O₃ powders were uniform and spherical-like. The particle sizes of powders gradually increased with increasing the calcination temperature. The dispersant can effectively prevent the powders from the agglomeration, and the particle sizes of powders gradually increased with increasing citric acid. The transmittance of the Y_1.8La_0.1Nd_0.1O₃ transparent ceramics was close to its theoretical value (80%).     

Influence of postdeposition annealing on structural properties and electrical characteristics of thin Tm2O3 and Tm2Ti2O7 dielectrics

We describe the structural properties and electrical characteristics of thin thulium oxide (Tm₂O₃) and thulium titanium oxide (Tm₂Ti₂O₇) as gate dielectrics deposited on silicon substrates through reactive sputtering. The structural and morphological features of these films were explored by X-ray diffraction, X-ray photoelectron spectroscopy, secondary ion mass spectrometry, and atomic force microscopy, measurements. It is found that the Tm₂Ti₂O₇ film annealed at 800 °C exhibited a thinner capacitance equivalent thickness of 19.8 Å, a lower interface trap density of 8.37 × 10¹¹ eV⁻¹ cm⁻², and a smaller hysteresis voltage of ∼4 mV than the other conditions. We attribute this behavior to the Ti incorporated into the Tm₂O₃ film improving the interfacial layer and the surface roughness. This film also shows negligible degrees of charge trapping at high electric field stress.     

Relation between highT c superconductivity and structure: A study of Ba3+x Cu6O14+δ and YBa2Cu3O7−δ systems

Superconductivity is found in tetragonal La_3−x Ba_3+x Cu₆O_14+δ and La, Ba)_6−x Sr _x Cu₆O_14+δ even though they do not possess Cu-O chains or the K₂NiF₄ structure. Resistivity measurements confirm the occurrence of a transformation from chain-superconductivity to sheet-superconductivity in YBa₂Cu₃O_7−δ as δ is varied in the range 0.0–0.5. Contribution No. 481 from the Solid State and Structural Chemistry Unit     

Structure and surface properties of praseodymium modified alumina

Mixed PrO₂-Al₂O₃ oxides with different PrO₂ content (1-20 wt.%) were prepared by wetness impregnation of γ-alumina with aqueous solution of praseodymium nitrate. The samples were characterized by different techniques, using surface adsorption-desorption of N₂ (S_BET), thermogravimetric analysis (TGA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy (DRS), temperature-programmed reduction (TPR) and temperature-programmed desorption of CO₂ (TPD-CO₂). TGA and XRD showed the presence of small praseodymium oxide species on the alumina surface. XPS and DRS detected electron deficient interaction between deposited praseodymium oxide and alumina. It was observed a lower reduction temperature for supported Pr oxide species compared to that of the bulk Pr₆O₁₁. TPD-CO₂ studies suggested that the deposition of Pr oxide on alumina leaded to increase of the basicity of mixed oxides.     

The effect of PT on phases and electrical properties in Ba-Y-Cu-O system

Several new phases containing platinum in Y-Ba-Cu-O system are reported in this paper. When Ba-Y-Cu-O system containing platinum is sintered at 950°C, two hexagonal phases YBa₂(Pt, Cu)₃O_9-δ and Ba₄Pt_1+x Cu_2-x Cu_2-x O_9-δ (x = 0.1 – 0.9) are found, respectively. The super-K₂NiF₄ structure Ba _x Y_2-x (Cu, Pt)O₄ is obtained above 1000°C in the Y-Ba-Cu-O system containing platinum. Electrical properties of these phases are also reported.     

X-ray study of some spinels containing gallium and manganese

The ternary oxides CrMnGaO₄, NiMnGaO₄, CuMnGaO₄ and ZnMnGaO₄, crystallize in the cubic spinel structure with lattice parametera=8.41±0.02 Å, 8.34±0.02 Å, 8.36±0.02 Å and 8.32±0.02 Å, respectively. The oxidation state of manganese in these spinels was determined x-ray spectroscopically. The site distribution was determined from the structural properties and calculated site preference energies of cations in the lattice. The ionic structures were found to be Ga³⁺ [Mn²⁺ Cr³⁺] O ₄ ^2? . Ga³⁺ [Cu²⁺ Mn³⁺] O ₄ ^2? , Mn²⁺ [Ga³⁺ Ni³⁺] O ₄ ^2? and Zn²⁺ [Mn³⁺ Ga³⁺] O ₄ ^2? .     

Point defects and orientation-dependent transport of matter and charge in iron-containing olivines

The variation of the oxygen content, x_O, of synthetic fayalite (Fe₂SiO₄) single crystals was investigated thermogravimetrically at 1130 °C as a function of the oxygen activity, a_O2 (= P_O2/P_O2° ≈ f_O2/f_O2° with P_O2° ≈ f_O2° = 1 bar ≈ 1 atm). It was found that x_O varies less in fayalite single crystals than in polycrystalline Fe₂SiO₄ studied earlier. The majority defects are most likely cation vacancies, (V_Me²⁺)″, ferric ions on M-sites, (Fe³⁺_Me²⁺), and ferric ions on Si-sites, (Fe³⁺_Si⁴⁺)′. Furthermore, the diffusion of iron in synthetic olivine single crystals ((Fe_xMg_1 − x)₂SiO₄) was studied at 1130 °C as a function of orientation, oxygen activity, and cationic composition. The observed oxygen activity dependencies suggest that cations move via different types of cation vacancies, most likely isolated vacancies, (V_Fe²⁺)″, and possibly neutral associates, {2(Fe³⁺_Me²⁺) ⋅ (V_Me²⁺)^′ ? ′}^x, the latter being minority defects. In addition, the electrical conductivity, σ, of fayalite single crystals was investigated as a function of orientation and oxygen activity within the stability field of fayalite at 1130 °C. The observed oxygen activity dependencies are compatible with (V_Me²⁺)^′ ? ′, (Fe³⁺_Me²⁺), and (Fe³⁺_Si⁴⁺)′ being the majority point defects at high a_O2 and with h^⋅ and e′ as the majority defects at low a_O2. The electrical conduction in fayalite is governed by contributions of electrons and holes. This extended point defect model for fayalite is also compatible with data for the variation of the oxygen content and for the iron tracer diffusion.     

Microwave-assisted synthesis and magnetic property of magnetite and hematite nanoparticles

Nanoparticles of magnetite (Fe₃O₄) and hematite (α-Fe₂O₃) have been prepared by a simple microwave heating method using FeCl₃, polyethylene glycol and N₂H₄·H₂O. The amount of N₂H₄·H₂O has an effect on the final phase of Fe₃O₄. The morphology of α-Fe₂O₃ was affected by the heating method. Crystalline α-Fe₂O₃ agglomerates were formed immediately at room temperature and most of these nanoparticles within agglomerates show the same orientation along [110] direction. After microwave heating, ellipsoidal α-Fe₂O₃ nanoparticles were formed following an oriented attachment mechanism. Both Fe₃O₄ and α-Fe₂O₃ nanoparticles exhibit a small hysteresis loop at room temperature.     

Infrared and raman studies on neodymium pentaphosphate and metaphosphates

The infrared and Raman spectra of crystalline samples of NdP₅O₁₄, NaNdP₄O₁₂ and KNdP₄O₁₂ are recorded. The spectra are analysed on the basis of vibrations of P=O, P-O, PO₂ and P-O-P groups. The P₄O ₁₂ ⁴⁻ ion has cyclic structures both in NaNdP₄O₁₂ and KNdP₄O₁₂ crystals. It has been inferred that the P-O-P bridges are stronger in metaphosphates.     

Bi0.5Ba0.5Fe0.5Ti0.49Nb0.01O3热敏陶瓷的微结构和电学性能研究

采用固相合成工艺,制备了Bi_05Ba_05Fe_05Ti_049Nb_001O₃（BBFTN）热敏陶瓷,借助X射线衍射仪、扫描电子显微镜、阻温测试仪和交流阻抗谱考察其微结构、直流电阻、介电特性、阻抗和电学模量方面的电学性能. 结果表明：BBFTN材料依然为立方钙钛矿结构,平均晶粒尺寸约为10 μm,晶格常数相对于BaTiO₃的晶格常数有所变大;室温电 关键词： 05Ba_05Fe_05Ti_049Nb_001O₃')" href="#">Bi_05Ba_05Fe_05Ti_049Nb_001O₃ 微结构 电学性能     

First principles study of Ca in BaTiO3 and Bi0.5Na0.5TiO3

BaTiO₃–Bi_0.5Na_0.5TiO₃ is one of the promising candidates as a high-temperature relaxor with a high Curie temperature and several preferred dielectric characteristics. It has been found experimentally for a long time that adding calcium to BaTiO₃–Bi_0.5Na_0.5TiO₃ improves its temperature characteristic of the capacitance [J. Electron. Mater. 39, 2471]. In this study, Calcium (Ca) defects in perovskite BaTiO₃ and Bi_0.5Na_0.5TiO₃ have been studied based on first-principles calculations. In both BaTiO₃ and Bi_0.5Na_0.5TiO₃, our calculations showed that Ca atom energetically prefers to substitute for the cations, that is Ba, Bi, Na and Ti, depending on the growth conditions. In most cases, Ca predominantly substitutes on the A-site without providing additional electrical carriers (serve as either neutral defects or self-compensating defects). The growth conditions where Ca can be forced to substitute for B-site (with limited amount) and the conditions where Ca can be forced to serve as an acceptor are identified. Details of the local structures, formation energies and electronic properties of these Ca defects are reported.