Synthesis of the first rNHC (remote N-heterocyclic carbene) complexes with no heteroatom in the carbene carbon-containing ring

Two cationic carbene complexes with no heteroatom in the ring containing the carbene carbon, trans-bromo(2-methyl-2,6-dihydroisoquinolin-6-ylidene)bis(triphenylphosphine)palladium(II) triflate (3) and trans-chloro(1,2-dimethyl-1,7-dihydroquinolin-7-ylidene)bis(triphenylphosphine)palladium(II) triflate (4), were synthesized by oxidative substitution of Pd(PPh3)4 with N-methylated 6-bromoisoquinolinium and 7-chloro-2-methylquinolinium cations, respectively. Compound 3 was also prepared by methylation of neutral trans-bromo(2-methylisoquinolin-6-yl)bis(triphenylphosphine)palladium(II) (5). All complexes were unambiguously characterized by NMR and X-ray crystallographic studies.     

Synthesis of 3-aminomethyl-2-aryl- 8-bromo-6-chlorochromones

[reaction: see text] An efficient synthetic route to Cbz-protected 3-aminomethyl-2-aryl-8-bromo-6-chlorochromones has been developed. 3-Aryl-1-(3-bromo-5-chloro-2-hydroxyphenyl)-2-propen-1-one or 2-aryl-8-bromo-6-chlorochroman-4-one could be reacted under Mannich conditions yielding 2-aryl-8-bromo-6-chloro-3-methylenechroman-4-one, which was further converted to the target compound via an aza-Michael reaction followed by an SeO(2) oxidation. This procedure represents a new method to introduce a primary aminomethyl group at the 3-position of a 2-arylchromone scaffold. The Cbz-protected 3-aminomethyl-2-aryl-8-bromo-6-chlorochromones can, e.g., be used in the synthesis of chromone-based beta-turn peptidomimetics.     

Synthesis of isothiocoumarin derivatives

A method was developed for the synthesis of 1-oxo-1H-isothiochromenes from 2-benzofuran-1(3H)-one (phthalide). 3-Bromo-6-chloro- and 3,6-dibromo-2-benzofuran-1(3H)-ones were prepared by the bromination of 6-chloro- and 6-bromo-2-benzofuran-1(3H)-ones and were converted by hydrolysis into 5-chloro- or 5-bromo-2-formylbenzoic acids. The condensation of these acids with rhodanine followed by recyclization gave 7-chloro- and 7-bromo-1-oxo-1H-isothiochromene-3-carboxylic acids.     

Electrochemical Reduction of Mono- and Dihalothiophenes at Carbon Cathodes in Dimethylformamide. First Example of an Electrolytically Induced Halogen Dance

Cyclic voltammetry and controlled-potential electrolysis have been employed to probe the electrochemical reduction of a number of mono- and dihalothiophenes at carbon cathodes in dimethylformamide containing tetramethylammonium perchlorate. Reduction of 2-bromo-, 3-bromo-, 2-chloro-, 3-chloro-, and 2-iodothiophene gives rise to a single irreversible cyclic voltammetric wave for each compound that corresponds to the two-electron cleavage of the carbon-halogen bond, and thiophene is obtained as the only product. Cyclic voltammograms for the reduction of 2,3-dibromo-, 2,4-dibromo-, 2,5-dibromo-, 3,4-dibromo-, 2-bromo-5-chloro-, and 3-bromo-2-chlorothiophene each exhibit a pair of irreversible two-electron waves. Electrolyses of either 2,3-dibromo- or 2,4-dibromothiophene at potentials corresponding to the first voltammetric wave yield a two-to-one mixture of 3-bromo- and 3,4-dibromothiophene; under similar conditions, electrolyses of 2,5-dibromothiophene give a mixture of 2-bromo-, 3-bromo-, and 3,4-dibromothiophene, electrolyses of 2-bromo-5-chlorothiophene afford a mixture of 3-bromo-, 3,4-dibromo-, 3-bromo-2-chloro-, 4-bromo-2-chloro-, and 2-chlorothiophene, and electrolyses of 3-bromo-2-chlorothiophene yield 2-chlorothiophene. Aside from the last result, these product distributions appear to arise from an electrolytically induced halogen dance. When electrolyses of the dibromothiophenes and of 2-bromo-5-chloro- and 3-bromo-2-chlorothiophene are performed at potentials that correspond to the second voltammetric wave, thiophene is the only product obtained.     

Reaction of halothane with carbonyl compounds in the presence of bases

The reaction of halothane, 2-bromo-2-chloro-1,1,1-trifluoroethane (1), with aldehydes and ketones in the presence of bases was found to give 1-alkyl- or 1-aryl-2-bromo-2-chloro-3,3,3-trifluoropropanols (2) or 2-chloro-3,3-difluoro-2-propenols (3) selectively in good to moderate yields depending on the bases and reaction conditions.     

Azaindole derivatives

3-Bromo-5-nitro-4-(-dimethylaminovinyl) pyridine, the reduction of which with iron filings in acetic acid led to 4-bromo-6-azaindole, was obtained from 3-bromo-4-chloro-5-nitropyridine via (3-bromo-5-nitro-4-pyridyl)malonic ester and 3-bromo-5-nitro-4-methylpyridine.See [1] for communication 55.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 86–88, January, 1979.     

N-(2-(5-(3-溴-1-(3-氯吡啶-2-基)-1H-吡唑-5-基)-1,3,4-噁二唑-2-基)-4-氯-6-甲基苯基)酰胺类新化合物的合成及生物活性

以N-吡啶基吡唑甲酸和2-氨基-3-甲基苯甲酸为起始原料,经由亲核加成、环化和酰化等多步反应合成了一系列结构新颖的N-(2-(5-(3-溴-1-(3-氯吡啶-2-基)-1H-吡唑-5-基)-1,3,4-噁二唑-2-基)-4-氯-6-甲基苯基)酰胺类化合物.测试了所合成化合物的杀虫及抑菌活性,结果表明,新化合物大多化合物在200 mg·L^-1浓度下对东方粘虫(Mythimna separataWalker)具有一定的杀虫活性,尤其是N-(2-(5-(3-溴-1-(3-氯吡啶-2-基)-1H-吡唑-5-基)-1,3,4-噁二唑-2-基)-4-氯-6-甲基苯基)乙酰胺(8a)和N-(2-(5-(3-溴-1-(3-氯吡啶-2-基)-1H-吡唑-5-基)-1,3,4-噁二唑-2-基)-4-氯-6-甲基苯基)-3-氯-2,2-二甲基丙酰胺(8e)致死率可达70%;部分化合物在50 mg·L^-1浓度下对油菜菌核病菌的抑菌活性相对较好(54.5%~63.6%),优于triadimefon和chlorantraniliprole;部分化合物如N-(2-(5-(3-溴-1-(3-氯吡啶-2-基)-1H-吡唑-5-基)-1,3,4-噁二唑-2-基)-4-氯-6-甲基苯基)-3,3-二甲基丁酰胺80和N-(2-(5-(3-溴-1-(3-氯吡啶-2-基)-1H-吡唑-5-基)-1,3,4-噁二唑-2-基)-4-氯-6-甲基苯基)-4-氟苯甲酰胺(8h)对苹果轮纹病菌具有中等抑菌活性.值得注意的是,化合物8e的杀粘虫活性和对油菜菌核病菌的抑菌活性都较为突出,可用作新农药创制研究的新型参考结构.     

1-Phenyl-1-halo-1-silacyclohexanes

The approaches to synthesis of 1-phenyl-1-halo-1-silacyclohexanes C₅H₁₀Si(Ph)X (X = F, Cl, Br) have been examined. 1-Phenyl-1-chloro-1-silacyclohexane has been prepared via the known reaction of phenyltrichlorosilane with dimagnesium derivative of 1,5-dibromopentane; up to 20% of 1-bromo-1-phenyl-1-silacyclohexane admixture is formed along with the target product. The minor product formation has been prevented using an alternative method of chlorination of 1-phenyl-1-silacyclohexane with N-chlorosuccinimide. 1-Phenyl-1-fluoro-1-silacyclohexane has been obtained in close to quantitative yield via the reaction of 1-phenyl-1-chloro-1-silacyclohexane with SbF₃ and in 70% yield via its reaction with HF. The synthesis of 1-phenyl-1-bromo-1-silacyclohexane via bromination of 1-phenyl-1-chloro-1-silacyclohexane with N-bromosuccinimide has given the target product as a minor one, the major product being disiloxane formed due to hydrolysis of the Si–Br bond.     

Synthesis,characterization and antibacterial activity of 1-([6-bromo-2-hydroxy-naphthalen-1-yl]arylphenyl)methyl)-3-chloro-4-(arylphenyl)-azetidin-2-one

One-pot synthesis of 1-([6-bromo-2-hydroxy-naphthalen-1-yl]-aryl-phenyl)methyl)-3-chloro-4-(aryl-phenyl)azetidin-2-ones has been reported in the present research work via Staudinger [2 + 2] ketene-imine cycloaddition reaction pathway. The reaction of 1-((Benzylideneamino)(aryl)methyl)-6-bromo-naphthalen-2-ols with chloroacetic acid and triethylamine afforded 1-([6-bromo-2-hydroxynaphthalen-1-yl]aryl-phenyl)methyl)-3-chloro-4-(aryl-phenyl)azetidin-2-ones. For the structural elucidation of series of compounds, different analytical and spectroscopic techniques such as elemental analysis, IR spectra, ¹H-NMR spectra and mass spectra were used. All the newly synthesized compounds were tested for their anti-bacterial activity studies. It revealed that some of the compounds possesses moderate to good activities as compared to standard drugs. The widest spectrum of anti-bacterial activities against both gram-positive and gram-negative bacterial strains among the examined compounds possessed having more hydroxyl group along with β-lactam ring compared to other substituted azetidinones.     

Novel copolymers of styrene. 7. Some ring-disubstituted butyl 2-cyano-3-phenyl-2-propenoates

Novel trisubstituted ethylenes, ring-disubstituted butyl 2-cyano-3-phenyl-2-propenoates, RPhCH?C(CN)CO₂C₄H₉ (where R is 2-bromo-5-methoxy, 3-bromo-4-methoxy, 5-bromo-2-methoxy, 2-chloro-3-methoxy, 3-chloro-4-methoxy, 2-chloro-6-methyl, 3-chloro-4-methyl, 2-fluoro-4-methoxy) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and butyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200-500ºC range with residue (1-6% wt.), which then decomposed in the 500–800ºC range.     

An easy preparation of per- and poly-fluoroalkyl propenyl sulfones

Sodium tridecafluorohexanesulfinate (1a) and sodium 1-chloro-2,2,2-trifluoroethanesulfinate (1b) were prepared by the treatment of 1-iodo-tridecafluorohexane and 1-bromo-1-chloro-2,2,2-trifluoroethane with sodium dithionite in a water-acetonitrile solution. Prolonged reaction of 1a with allyl bromide in DMF afforded tridecafluorohexane 1-propenyl sulfone 2 as the only product in good yield. A similar treatment of 1b gave exclusively 1-chloro-2,2,2-trifluoroethane 3-propenyl sulfone 4. Bromination of 4 followed by dehydrobromination with Et₃N resulted in a mixture of 1-chloro-2,2,2-trifluoroethane 3-bromo-1-propenyl sulfone 6 and 1-chloro-2,2,2-trifluoroethane 2-bromo-3-propenyl sulfone 7, while dehydrobromination with pyridine gave sulfone 6 practically as the only product. α,β-Unsaturated sulfones 2 and 6 were shown to be active dienophiles.     

3-溴-1-(3-氯-2-吡啶基)-1H-吡唑-5-甲酸的合成

以2,3-二氯吡啶为起始原料,通过水合肼亲核取代、马来酸二乙酯环合制得2-(3-氯-2-吡啶基)-5-氧-3-吡唑烷甲酸乙酯(5);5经苯磺酰氯酯化、溴化氢溴化制得3-溴-1-(3-氯-2-吡啶基)-4,5-二氢-1H-吡唑-5-甲酸乙酯(7);7经脱氢、水解合成了用于制备氯虫酰胺的关键中间体--3-溴-1-(3-氯-2-吡啶基)-1H-吡唑-5-甲酸,总收率39.5%,其结构经~1H NMR和MS确证.     

Palladium and copper cocatalyzed tandem N-H/C-H Bond functionalization: synthesis of CF3-containing indolo- and pyrrolo[2,1-a]isoquinolines

A palladium- and copper-catalyzed tandem N-H/C-H bond functionalization reaction of ortho-(2-chlorovinyl)bromobenzenes with indoles and pyrroles has been developed. A variety of CF(3)-containing indolo- and pyrrolo[2,1-a]isoquinolines were prepared in moderate to good yields via the cyclization of 1-bromo-2-(2-chloro-3,3,3-trifluoroprop-1-enyl)benzenes with indoles and pyrroles.     

Synthesis of Functionalized 1-Alkenylboronates via Hydroboration-Dealkylation of Alkynes with Diisopinocampheylborane

Hydroborations of propargyl chloride, ethyl propiolate, 3-trimethylsilyloxy-1-butyne, 1,1-diethoxy-2-propyne, 1-iodo- and 1-bromo-1-hexyne, and 1-bromo-3-chloro-1-propyne with diisopinocampheylborane 1, followed by dealkylation of the isopinocampheyl groups with acetaldehyde provide the corresponding 1-alkenylboronates in high yields with high regioselectivity.     

Investigation of regioselectivity on the reaction of 5-bromo-2,4-dichloro-6-methylpyrimidine with ammonia

Regioselective displacement reaction of ammonia with 5-bromo-2,4-dichloro-6-methylpyrimidine was studied by X-ray crystallography analysis and showed the formation of 5-bromo-2-chloro-6-methylpyrimidin-4-amine as a main product. Reaction of the latter compound with secondary amines in boiling ethanol afforded 4-amino-5-bromo-2-substituted aminopyrimidines. The synthesized compound in this paper crystallized in the monoclinic crystal system space group P2₁/n. In the title cocrystal, 5-bromo-2-chloro-6-methylpyrimidin-4-amine·3H₂O, the asymmetric unit contains one crystallographically independent 5-bromo-2-chloro-6-methylpyrimidin-4-amine and three crystallization of water molecules. The typical intramolecular O−H⋯N as well as O−H⋯O hydrogen bond is observed in the crystalline network of the title compound. It is interesting to point out that the crystal structure is further stabilized by O−H⋯O hydrogen bonds created by (H₂O)_∞ clusters.     

Unique tandem Heck-lactamization naphthyridinone ring formation between acrylanilides and halogenated pyridines

The Heck coupling of acrylanilides with 4-bromo-2-chloro-3-iodo-pyridine using palladium acetate can produce bis-Heck products or undergo an unusual tandem Heck-lactamization ring formation to generate 5-chloro-1-aryl-1,6-naphthyridin-2(1H)-ones.     

Photoinduced cyclization of 3-acyl-2-halo-1-[(ω-phenylethynyl)alkyl]indoles to azaheterocyclo[1,2,3-lm]-fused benzo[c]carbazoles

A one-pot synthesis of azaheterocyclo[1,2,3-lm]-fused benzo[c]carbazoles (2 and 3) has been developed by photocyclization of 3-acyl-2-halo-1-[(ω-phenylethynyl)alkyl] indoles (1) in good to excellent yields. All products are formed from 1 via two sequential photocyclization reactions. Two products, 9-chloro-7,8-dihydro-6H-benzo[c]pyrido[1,2,3-lm]carbazole (2a-h) and 7,8-dihydro-6H-benzo[c]pyrido[1,2,3-lm]carbazole (3a-h), are produced in the photocyclization of 2-halo-1-[(ω-phenylethynyl)alkyl]indole-3-carbaldehydes (1a-h). In contrast, only products 2a-h are produced in the photocyclization of 3-acetyl-2-chloro-1-[(ω-phenylethynyl)alkyl]indole-3-carbaldehydes (1o-t). The 9-H in 3a-h (n = 2) does originate from the formyl group in 1a-h via 1,5-hydrogen shift. The structures of three new products, 9-bromo-7,8-dihydro-6H-benzo[c]pyrido[1,2,3-lm]carbazole (2b), 9-chloro-10-methyl-7,8-dihydro-6H-benzo[c]pyrido[1,2,3-lm]carbazole (3h) and 12-chloro-7,8-dihydro-6H-benzo[c]pyrido[1,2,3-lm]carbazole (2w), have been corroborated by single-crystal X-ray structural analyses.     

Logistic flexibility in the preparation of isomeric halopyridinecarboxylic acids

Although there are many conceivable ways to funtionalize, and specifically carboxylate, 2-chloro-4-(trifluoromethyl)pyridine optionally at all three vacant positions, it is more straightforward to prepare only the 2-chloro-4-(trifluoromethyl)pyridine-3-carboxylic acid (1) from this precursor and the other 6-chloro-4-(trifluoromethyl)pyridine-2- and -3-carboxylic acids (2 and 3) from a different one, viz. 5-bromo-2-chloro-4-(trifluoromethyl)pyridine. In the same manner, it proved more convenient to convert 5-chloro-2-(trifluoromethyl)pyridine in only two of the corresponding acids (6 and 7) and to make the third one (8) from 3-bromo-5-chloro-2-(trifluoromethyl)pyridine as an alternative starting material. All model substrates for functionalization were readily accessible from the correspondingly substituted chloroiodopyridine through heavy halogen displacement by in situ generated (trifluoromethyl)copper.     

Selective Stille coupling reactions of 3-chloro-5-halo(pseudohalo)-4H-1,2,6-thiadiazin-4-ones

A series of 3-chloro-5-halo(pseudohalo)-4H-1,2,6-thiadiazin-4-ones (halo/pseudohalo = Br, I, OTf) are prepared from 3,5-dichloro-4H-1,2,6-thiadiazin-4-one (3) in good yields. Of these the triflate reacts with tributyltin arenes (Stille couplings) chemoselectively to give only the 5-aryl-3-chloro-4H-1,2,6-thiadiazin-4-ones in high yields. This allowed the preparation of a series of unsymmetrical biaryl thiadiazines and ultimately a series of oligomers. Furthermore, treatment of 3-chloro-5-iodo-4H-1,2,6-thiadiazin-4-one (10) with Bu(3)SnH and Pd(OAc)(2) gave the bithiadiazinone which can also be further arylated via the Stille reaction to give bisthien-2-yl and bis(N-methylpyrrol-2-yl) analogs.     

On the synthesis and animation of 5-chloro-and 5-bromo-1,7-naphthyridine

A new synthesis of 5-chloro- and 5-bromo-1,7-naphthyridine, using 8-amino-1,7-naphthyridine as starting material is described. On amination with potassium amide in liquid ammonia, the 5-bromo compound undergoes a tele-amination into 8-amino- and 2-amino-1,7-naphthyridine and a Chichibabin reaction yielding 8-amino-5-bromo-1,7-naphthyridine. The reaction with the 5-chloro compound occurs at a much lower rate than the 5-bromo compound and only gives 8-amino-5-chloro-1,7-naphthyridine in a small yield. Convincing ¹H-nmr evidence is presented, showing that the 5-bromo- and 5-chloro-1,7-naphthyridine give addition of the amide ion at position 8 and that the 5-chloro compound also gives addition at position 2.