Lipid imaging with cluster time-of-flight secondary ion mass spectrometry

This brief article provides an overview of the current state of the art in biological imaging mass spectrometry using cluster time-of-flight secondary ion mass spectrometry (TOF–SIMS). Recent and spectacular improvements in terms of sensitivity of TOF–SIMS imaging methods have allowed many biological applications to recently be successfully tested, such as mapping of lipid disorders in human muscles of a patient suffering from dystrophy, localization of surfactins after the swarming of bacteria on a surface, or lipid mapping over whole-body animal sections.     

Characterization of polymeric surfaces and interfaces using time-of-flight secondary ion mass spectrometry

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) is used for chemical analysis of surfaces. ToF-SIMS is a powerful tool for polymer science because it detects a broad mass range with good mass resolution, thereby distinguishing between polymers that have similar elemental compositions and/or the same types of functional groups. Chemical labeling techniques that enhance contrast, such as deuterating or staining one constituent, are generally unnecessary. ToF-SIMS can generate both two-dimensional images and three-dimensional depth profiles, where each pixel in an image is associated with a complete mass spectrum. This Review begins by introducing the principles of ToF-SIMS measurements, including instrumentation, modes of operation, strategies for data analysis, and strengths/limitations when characterizing polymer surfaces. The sections that follow describe applications in polymer science that benefit from characterization by ToF-SIMS, including thin films and coatings, polymer blends, composites, and electronic materials. The examples selected for discussion showcase the three standard modes of operation (spectral analysis, imaging, and depth profiling) and highlight practical considerations that relate to experimental design and data processing. We conclude with brief comments about broader opportunities for ToF-SIMS in polymer science.     

Comparative study of organic dyes with time-of-flight static secondary ion mass spectrometry and related techniques

A series of cationic, zwitterionic and anionic fluorinated carbocyanine dyes, spin-coated on Si substrates, were measured with time-of-flight static secondary ion mass spectrometry (TOF-S-SIMS) under Ga(+) primary ion bombardment. Detailed fragmentation patterns were developed for all dyes measured. In the positive mode, the resulting spectra showed very intense signals for the precursor ions of the cationic dyes, whereas the protonated signals of the anionic dyes were hardly detected. Differences of three orders of magnitude were repeatedly observed for the secondary ion signal intensities of cationic and anionic dyes, respectively. All measured dyes yielded mass spectra containing several characteristic fragment ions. Although the secondary ion yields were still higher for the cationic than the anionic dye fragments, the difference was reduced to a factor of < or =10. This result and the fact that M(+), [M + H](+) or [M + 2H](+) are even-electron species make it very likely that the recorded fragments were not formed directly out of the (protonated) parent ions M(+), [M + H](+) or [M + 2H](+). In the negative mode, none of the recorded spectra contained molecular information. Only signals originating from some characteristic elements of the molecules (F, Cl), the anionic counter ion signal and some low-mass organic ions were detected. A comparative study was made between TOF-S-SIMS, using Ga(+) primary ions, and other mass spectrometric techniques, namely fast atom bombardment (FAB), electrospray ionization (ESI) and matrix-assisted laser desorption/ionization (MALDI). The measurements showed that MALDI, ESI and FAB all give rise to spectra containing molecular ion signals. ESI and FAB produced M(+) and [M + H](+) signals, originating from the cationic and zwitterionic dyes, in the positive mode and M(-) and [M - H](-) signals of the anionic and zwitterionic dyes in the negative mode. With MALDI, molecular ion signals were measured in both modes for all the dyes. Structural fragment ions were detected for FAB, ESI and MALDI in both the positive and negative modes. Compared with the other techniques, TOF-S-SIMS induced a higher degree of fragmentation.     

Profiling and imaging of tissues by imaging ion mobility-mass spectrometry

Molecular profiling and imaging mass spectrometry (IMS) of tissues can often result in complex spectra that are difficult to interpret without additional information about specific signals. This report describes increasing data dimensionality in IMS by combining two-dimensional separations at each spatial location on the basis of imaging ion mobility-mass spectrometry (IM-MS). Analyte ions are separated on the basis of both ion-neutral collision cross section and m/z, which provides rapid separation of isobaric, but structurally distinct ions. The advantages of imaging using ion mobility prior to MS analysis are demonstrated for profiling of human glioma and selective lipid imaging from rat brain.     

Probing interaction of melittin with lipid membranes using liquid secondary ion mass spectrometry

Ｔｈｅｐｒｏｃｅｓｓｏｆｍｅｍｂｒａｎｅｉｎｓｅｒｔｉｏｎｏｆｔｈｅｔｏｘｉｃｐｒｏｔｅｉｎｃａｎｂｅｄｉｖｉｄｅｄｉｎｔｏｔｗｏｓｔｅｐｓ:ａｂｓｏｒｐｔｉｏｎａｎｄｉｎｓｅｒｔｉｏｎ.Ｔｈｅｐｒｏｔｅｉｎｍｏｌｅｃｕｌｅｓｆｉｒｓｔｉｎｔｅｒａｃｔｗｉｔｈｔｈｅｍｅｍｂｒａｎｅｓｕｒｆａｃｅａｎｄｂｅｃｏｍｅａｄｓｏｒｂｅｄｏｎｔｏｔｈｅｍｅｍｂｒａｎｅｔｈｒｏｕｇｈｓｔａｔｉｃｅｌｅｃｔｒｉｃｉｔｙ.Ｔｈｅｃｏｎｆｏｒｍａｔｉｏｎｏｆｔｈｅｔｏｘｉｃｐｒｏｔｅｉｎｗｉｌｌｃｈａｎｇｅｕｎｄｅ…     

Classification of secondary ion mass spectrometry (SIMS) micrographs to characterize chemical phases

This work demonstrates the potential of multivariate image analysis methods in the extraction of useful, problem dependent information from SIMS images. Specific algorithms have been developed to classify SIMS micrographs manually as well as automatically. A feature selection has been achieved by means of principal component analysis with a subsequent image classification.As an application example for these improved digital image processing tools chemical phases within a soldered industrial metal sample have been identified. This is of highly practical value as it was assumed that during the soldering process inhomogeneities occur along the joint site which cause a cracking of the brazed material under mechanical strain conditions.     

Sensitive detection of drug vapors using an ion funnel interface for secondary electrospray ionization mass spectrometry

In this study, we use an ion funnel (IF) at ambient pressure to enhance the sensitivity of secondary electrospray ionization (SESI). Atenolol, salbutamol and cocaine as test compounds are delivered to the SESI interface in the gas phase and are charged with three nano electrosprays. In our experiments, we show that the compounds can be detected at concentrations in the low pptv range, which is an increase of two orders of magnitude compared with the results without the IF. With a standard SESI interface, the compounds could not be detected at all. With the use of the SESI IF interface for the headspace analysis of bananas and limes, we can detect many more compounds and at higher intensities than with a standard SESI interface. Copyright © 2012 John Wiley & Sons, Ltd.     

Quantification of grafted poly(ethylene glycol)-silanes on silicon by time-of-flight secondary ion mass spectrometry

Silicon grafted monodisperse poly(ethylene glycol) (PEG) silanes with various PEG chain lengths and mixtures of these were systematically analyzed with static time-of-flight secondary ion mass spectrometry (TOF-SIMS). The mass spectra show differences in the various relative signal intensities, an observation that was used to elucidate important aspects of the grafting process. The relationship between PEG-silane fragment ion abundances and Si(+) ion abundances were used to (i) qualitatively describe layer thicknesses of grafted mixtures of PEG-silanes on silicon, (ii) construct a calibration curve from which PEG chain length (or molecular mass) can be determined and (iii) quantitatively determine surface mixture compositions of grafted monodisperse PEG-silanes of different chain lengths (3, 7 and 11 PEG units). The results suggest that discrimination does take place in the adsorption process. The PEG-silane with the shorter PEG chain is discriminated for mixtures containing PEG3-silane, whereas the PEG-silane with the longer PEG chain is discriminated in PEG7/PEG11-silane mixtures. The origin of this difference in adsorption behavior is not well understood. Aspects of the grafting process and the TOF-SIMS analyses are discussed.     

Quantitative analysis by thin-layer chromatography with secondary ion mass spectrometry

Summary A direct combination of thin-layer chromatography with secondary ion mass spectrometry (TLC/SIMS) provides a method for the quantitative analysis of thermally unstable compounds or compounds of low volatility such as nicergoline. The method is very simple and has excellent precision. The analysis was performed by using an aluminium TLC plate and a mixture of methylene chloride, acetone, and distilled water as a developing solvent. After development the portion of the plate with the nicergoline and the internal standard spots was cut off the TLC plate, and was attached to the SIMS holder directly. The amount of nicergoline was determined from the ratio of the fragment ion intensity of the nicergoline to the internal standard. The calibration curve was linear, and the detection limit was 10 ng at a signal-to-noise ratio of 5. This method should be considered for application to the determination of drugs in biological samples and also for the determination of possible impurities and decomposition products in drugs.     

Ultraviolet photocatalytic degradation of cholesterol on TiO2: secondary ion mass spectrometry

Cholesterol (C₂₇H₄₆O stated as M) is used as a model of bio‐organic contamination, because this compound is in almost every living organism, and its photocatalytic degradation on titanium oxide (TiO₂) surface with UV exposure is investigated. Secondary ion mass spectrometry as a surface‐sensitive technique is suited to study this degradation process with focus on intermediates. A fragment of M–OH represents the intact molecule of cholesterol and provides its relative concentration on the surface. The intensity of M–OH decreases after 24‐h UV irradiation, and the level of degradation is 89% with the pseudo‐first kinetic constant of 0.0207 min^?1 within 2 h. A fragment of MO–H represents an intermediate as one of the cholesterol oxidation products. The irradiation from a bottom in comparison with a top reveals the differences in the mechanism of the intermediate formation through the intensity and the kinetics with values of factor of 1/3 and 30 min, respectively. The roles of electrons and holes, primarily generated in TiO₂ by UV, and also of superoxide anion radical and hydroxyl radical, as the secondary reactive species, are discussed to illustrate the bottom/top mechanisms. Copyright © 2016 John Wiley & Sons, Ltd.     

High mass resolution breath analysis using secondary electrospray ionization mass spectrometry assisted by an ion funnel

In this study, we used secondary electrospray ionization mass spectrometry assisted by an ion funnel (IF) operating at ambient pressure to find compounds in the mass range of 100–500 m/z in online breath fingerprinting experiments. In low‐resolution experiments conducted on an ion trap instrument, we found that pyridine is present in breath of individuals long after drinking coffee. In high‐resolution experiments conducted on a Fourier transform ion cyclotron resonance, we found more than 30 compounds in the mass range of 100–500 m/z in analogous online breath experiments. More than a third of these compounds have molecular weights above 200 Daltons and have not been mentioned in previous studies. In low‐resolution experiments as well as experiments without the IF, these compounds could not be detected. Copyright © 2012 John Wiley & Sons, Ltd.     

ZnS nanoparticle decorated ZnO nanowall network: investigation through electron microscopy and secondary ion mass spectrometry

We report on the fabrication of ZnO nanowall networks decorated with ZnS nanostructures on aluminum substrates using simple chemical route. The structural features and elemental constituents of the ZnS/ZnO heterostructure systems have been extensively studied using electron microscopy and energy dispersive X‐ray spectroscopy. The light emission characteristics of the bare and heterostructured systems have been analyzed using room temperature photoluminescence spectroscopy. The decoration of ZnS nanostructures over ZnO nanowalls has been evidenced through secondary ion mass spectrometry (SIMS). The ‘matrix effect’ has been found to be prominent during SIMS analysis of the bare and heterostructured nanowalls indicating the presence of ZnS phase over ZnO surface. ‘MCs⁺‐SIMS’ has been employed to suppress the matrix effect and is found to be potentially effective in making a semi‐quantitative estimation of Zn and O surface–atom concentrations in both systems. The luminescence responses of the ZnS/ZnO heterostructures have been found to be strongly dependent on the extent of ZnS phase over ZnO. The higher luminescence responses in ZnS/ZnO heterostructures fabricated with smaller ZnS nanoparticles have been explained in terms of a mechanism of charge‐carrier transfer from ZnS to ZnO. Copyright © 2014 John Wiley & Sons, Ltd.     

Organic surface analysis with time-of-flight SIMS

In the last few years static secondary ion mass spectrometry (SSIMS) has proved to be a versatile and indispensable method for determining the composition and the structure of the outermost molecular layers of a surface. In particular when using a high-resolution time-of-flight (TOF) mass analyser a high sensitivity can be obtained with SSIMS. In this review it will be shown that the analysis of surfaces with a well-defined chemical structure by means of SSIMS has given detailed insight into the relation between the structure of the fragment ions formed by ion bombardment of the surface and the original surface structure. These studies have also improved the possibilities for quantifying the SSIMS results. In addition, the better knowledge about the ionformation process can be used for the analysis of surfaces of unknown composition and structure. Finally, some recent applications of SSIMS will be presented.Dedicated to Professor Günther Tölg on the occasion of his 60th birthday     

Extracellular matrix alterations in low‐grade lung adenocarcinoma compared with normal lung tissue by imaging mass spectrometry

Lung adenocarcinoma (LUAD) is the second most common cancer, affecting both men and women. Fibrosis is a hallmark of LUAD occurring throughout progression with excess production of extracellular matrix (ECM) components that lead to metastatic cell processes. Understanding the ECM cues that drive LUAD progression has been limited due to a lack of tools that can access and report on ECM components within the complex tumor microenvironment. Here, we test whether low‐grade LUAD can be distinguished from normal lung tissue using a novel ECM imaging mass spectrometry (ECM IMS) approach. ECM IMS analysis of a tissue microarray with 20 low‐grade LUAD tissues and 20 normal lung samples from 10 patients revealed 25 peptides that could discriminate between normal and low‐grade LUAD using area under the receiver‐operating curve (AUC) ≥0.7, P value ≤.001. Principal component analysis demonstrated that 62.4% of the variance could be explained by sample origin from normal or low‐grade tumor tissue. Additional work performed on a wedge resection with moderately differentiated LUAD demonstrated that the ECM IMS analytical approach could distinguish LUAD spectral features from spectral features of normal adjacent lung tissue. Conventional liquid chromatography with tandem mass spectrometry (LC‐MS/MS) proteomics demonstrated that specific sites of hydroxylation of proline (HYP) were a main collagen post translational modification that was readily detected in LUAD. A distinct peptide from collagen 3A1 modified by HYP was increased 3.5 fold in low‐grade LUAD compared with normal lung tissue (AUC 0.914, P value <.001). This suggests that regulation of collagen proline hydroxylation could be an important process during early LUAD fibrotic deposition. ECM IMS is a useful tool that may be used to define fibrotic deposition in low‐grade LUAD.     

Characterization of synthetic nucleic acids by electrospray ionization quadrupole time-of-flight mass spectrometry

The potential of electrospray ionization quadrupole-quadrupole-time-of-flight mass spectrometry (ESI-QqTOF-MS) for the characterization of synthetic nucleic acids was evaluated. Oligonucleotides ranging in size from 12 up to 51 nucleotides were analyzed via direct infusion MS as well as via liquid chromatography (LC) online hyphenated to MS. These experiments proved the outstanding mass spectrometric performance of the TOF mass analyzer in regard of accuracy, reproducibility, resolution, and sensitivity. During a 1-min run, the monoisotopic mass of (dT)(24) was measured with a maximum relative mass deviation of 7.64 ppm proving the high mass accuracy of the TOF analyzer. Over a period of 1 h, mean deviations were determined in the range between -3.58 ppm and 3.06 ppm demonstrating the high stability of the applied external calibration. The molecular mass of a 51-mer was measured with a deviation smaller than 3.23 ppm from the theoretical value. The resolution exceeded a value of m/Deltam = 20 000 (m is the measured mass and Deltam the full peak width at half-maximum), which enabled the separation of the isotopic peaks of all investigated oligonucleotides. Because of the outstanding transmission and detection efficiency of the TOF mass analyzer, detection limits in the amol/microl to low fmol/microl range were reached. The usability of LC-ESI-QqTOF-MS for the qualitative and quantitative analysis of synthetic oligonucleotide mixtures was demonstrated.     

Probing the surface chemical structure of some novel poly(ortho esters) prepared with N-methyl and N-phenyl ethanolamine by time-of-flight secondary ion mass spectrometry (ToF-SIMS)

The surface chemical structures of a series of novel poly(ortho ester) homopolymer and copolymer films prepared using N-methyl- and N-phenyl-ethanolamine (MDE and PDE) have been investigated using time-of-flight secondary ion mass spectrometry (ToF-SIMS). Systematic fragmentation patterns were observed within the ToF-SIMS spectra up to m/z = 1600, which were readily interpreted in terms of the polymer structures. Cations were detected which could be assigned to structures arising from the diols, the ortho ester species and diads, triads etc. of the monomer, from both the homopolymer and the random portion of the copolymer chains. The analysis of the proposed ion structures suggested two major mechanisms of fragmentation based on the cleavage of the ortho ester bonds involving either the exocyclic or the endocyclic alkoxy group. The Tof-SIMS peak area ratios for ions diagnostic of the diols and the ortho ester species reflected the bulk copolymer composition in a semi-quantitative fashion. The observation of such relationships for high mass cations (up to m/z = 500) is particularly noteworthy and has not been reported previously. These studies allow a dramatic insight into the surface chemical structure of these poly(ortho esters), information which has formed the foundation of current investigations on the mechanisms of the acid-catalysed surface degradation of these polymers.     

Orthogonal organic and aqueous‐based washes of tissue sections to enhance protein sensitivity by MALDI imaging mass spectrometry

Imaging mass spectrometry (IMS) is an emergent and innovative approach for measuring the composition, abundance and regioselectivity of molecules within an investigated area of fixed dimension. Although providing unprecedented molecular information compared with conventional MS techniques, enhancement of protein signature by IMS is still necessary and challenging. This paper demonstrates the combination of conventional organic washes with an optimized aqueous‐based buffer for tissue section preparation before matrix‐assisted laser desorption/ionization (MALDI) IMS of proteins. Based on a 500 mM ammonium formate in water–acetonitrile (9:1; v/v, 0.1% trifluororacetic acid, 0.1% Triton) solution, this buffer wash has shown to significantly enhance protein signature by profiling and IMS (~fourfold) when used after organic washes (70% EtOH followed by 90% EtOH), improving the quality and number of ion images obtained from mouse kidney and a 14‐day mouse fetus whole‐body tissue sections, while maintaining a similar reproducibility with conventional tissue rinsing. Even if some protein losses were observed, the data mining has demonstrated that it was primarily low abundant signals and that the number of new peaks found is greater with the described procedure. The proposed buffer has thus demonstrated to be of high efficiency for tissue section preparation providing novel and complementary information for direct on‐tissue MALDI analysis compared with solely conventional organic rinsing. Copyright © 2013 John Wiley & Sons, Ltd.     

Determination of two phototransformation products of bentazone using quadrupole time-of-flight mass spectrometry

The transformation products 2-(isopropylcarbamoyl)phenylsulfamic acid and 2-(1-hydroxypropane-2-yl)-1,2-dihydroindazol-3-one could be determined during the photolysis of the herbicide bentazone. Degradation experiments were carried out with different types of water in a natural sunlight simulating system. Besides the anticipated hydroxylated bentazone, the second transformation product was identified by means of exact mass measurement using ultra-performance liquid chromatography/quadrupole time-of-flight mass spectrometry (UPLC/QqToF MS). Both phototransformation products occurred in all water types tested. The required irradiation time was matrix dependent. 2-(Isopropylcarbamoyl)phenylsulfamic acid was detected in a drainage channel in the Ebro river delta (Catalonia, Spain).     

High spatial resolution imaging mass spectrometry and classical histology on a single tissue section

The work presented in this report describes and demonstrates a protocol for protein imaging analysis of biological tissue using MALDI IMS where histological staining and MS analysis are performed on the same tissue section. Spatial image resolution is shown at 35 μm for sagittal sections of the cerebellum from rat brain.     

离子阱颗粒质谱研究进展

随着质谱技术的不断发展,对超高质量颗粒物质的分析已经成为质谱领域研究的一个重要方向.离子阱颗粒质谱(particle ion trap mass spectrometry)作为用于完整颗粒质量分析的有利工具,拓展了质谱技术在巨大颗粒物质量分析中的应用范围.本文对离子阱颗粒质谱仪器的研究进展及其在各个领域的应用进行了综述,并展望了离子阱颗粒质谱未来的发展趋势.