Pulsed Current Electrochemical Synthesis of Nickel Nanoclusters and Application as Catalyst for Hydrogen and Oxygen Revolution

The main objective of this research is to prepare nickel nanoparticles with more porous structure by the pulsed current electrochemical method. A nickel optimized nanopowder was synthesized by using nickel chloride (0.005 M) as precursor, silver nitrate as a nucleation agent (at 0.5% mole of nickel salt in the starting solution), polyvinyl pyrrolidone (PVP) as structure director (with PVP/Ni = 1.7 g/g), ammonia (2 M), and hydrazine as reduction agent (with Hydrazine/Ni = 16 g/g) by pulsed current of 58 mA cm⁻² with a frequency of 12 Hz. The morphology and particle size of each synthesized sample was studied by scanning electron microscopy (SEM). The obtained results showed that temperature has no considerable effect on the morphology and particle size of nickel nanopowder. The nickel nanopowder synthesized in optimum conditions has excellent uniform and a more porous structure including nanoclusters with a particle size of approximately 10–20 nm. The obtained results indicate that the pulsed current electrochemical method can be used as a confident and controllable method for the preparation of nickel nanoparticles. Optimized nickel nanoclusters were used as catalyst for hydrogen and oxygen revolutions. Cyclic Voltammetry results showed that the synthesized nanoclusters can facilitate hydrogen reduction and increase hydrogen and oxygen revolution rates.     

Synthesis,modeling, and biological studies of new thiazole-pyrazole analogues as anticancer agents

A series of various substituted thiazole-pyrazole hybrids 5, 7, 8, and 9 were synthesized, and their chemical structures were confirmed by spectral data (infrared, ¹H & ¹³C NMR and Mass). The frontier molecular orbital structural and energetic properties of the targeting thiazole-pyrazole hybrids were explored using the DFT/B3LYP methodology. The data indicated that they had a low energy gap (ΔE_H-L), 1.51–2.42 eV, and may be sorted as 6 < 9 < 7 < 8 < 4 < 3 < 5. The synthesized thiazole-pyrazole hybrids were explored for their activities towards HepG2, MCF-7, and HCT-116 in contrast to doxorubicin. The newly synthesized thiazole-pyrazole analogues demonstrated an acceptable efficiency towards the HepG2 cancer cell line in accordance with this order: 8 > 9 > 7 > 6. Meanwhile, most of the synthesized analogues displayed a significant reduction for the activity of the CAIX inhibitor, with IC₅₀ = 0.071 ± 0.015 to 0.902 ± 0.043 µM. Likewise, they revealed an IC₅₀ = 0.119 ± 0.043 to 0.906 ± 0.04 µM for CAXII inhibitor. Moreover, the newly synthesized thiazole-pyrazole analogues were exposed to the theoretical molecular docking study with PDB:1RHJ as the crystal structure of caspase-3 to examine their antiapoptotic effect as well as their certain properties on the caspase-3 enzyme.     

Efficient synthesis of new azo-sulfonamide derivatives and investigation of their molecular docking and cytotoxicity results

The present study focused on the synthesis, introduction and investigation of the biological effects of sulfonamide-derived products as new azo-sulfonamides (samples 1–6). In this transformation, the amine sulfonamide is first converted to the corresponding diazonium salt, which is then attacked by a nucleophilic carbon of the aromatic ring in the playing medium. All products were obtained with reasonable yields and high purity. The structure of synthesized derivatives was determined using various analytical tools including FT-IR, ¹H NMR, ¹³C NMR and XRD spectroscopy, and the synthesized products were purified and identified. Biological properties of newly synthesized azo-compounds similar to SSZAD were also investigated. These compounds were tested in terms of biological effectiveness. The results of biochemical assays show that: the products have significant biological properties. MTT toxicity of compounds in breast cancer cells (MCF-7) for compounds 1–6 according to IC₅₀ compare to Vinblastine is Vin > 5 > 4 > 6 > 2 > 3 > 1. The biochemical results obtained were analyzed by molecular docking interaction studies and showed strong hydrogen bonding with the target receptor. The docking calculation has been invoked to reveal the type of interactions that synthesized compounds can establish with the residues forming the active sites of the target proteins, 1FDW the three higher scores molecules appears to be (6 > 1 > 2), 3FC2 (the three highest binding affinities are in the order of 1 > 3 > 6), and 5GWK (three highest binding affinities are 1 > 3 > 6). The results indicate the effective interaction of all products with the targets. The molecular dynamics simulation has been invoked to study the presence of a stable system of the interacting protein–ligand.     

Synthesis and application of a molecularly imprinted polymer in the solid-phase extraction of ketoprofen from wastewater

Ketoprofen is a nonsteroidal anti-inflammatory drug widely consumed by humans as it possesses analgesic activities. A selective molecularly imprinted polymer (MIP) for ketoprofen was synthesized and applied as a solid-phase extraction sorbent. MIP was synthesized using 2-vinylpyridine, ethylene glycol dimethacrylate, 1,1′-azobis(cyclohexanecarbonitrile), toluene/acetonitrile (9:1, v/v), and ketoprofen as a functional monomer, cross-linker, initiator, porogenic mixture, and template, respectively. The polymerization was performed at 60 °C for 16 h, and thereafter the temperature was increased to 80 °C for 24 h to achieve a solid monolith polymer. Nonimprinted polymer was synthesized in a similar manner with the omission of ketoprofen. Characterization with thermogravimetric analysis and X-ray diffraction showed that the synthesized polymers were thermally stable and amorphous. Solid-phase extraction cartridges packed with MIP were used with high-performance liquid chromatography for quantitative analysis of ketoprofen in wastewater. The analytical method gave detection limits of 0.23, 0.17, and 0.09 μg/L in wastewater influent, effluent, and deionized water, respectively. The recovery for the wastewater influent and effluent spiked with 5 μg/L of ketoprofen was 68%, whereas 114% was obtained for deionized water. The concentrations of ketoprofen in the influent and effluent samples were in the ranges of 22.5–34.0 and 1.14–5.33 μg/L, respectively. Overall, the analytical method for the analysis of ketoprofen in wastewater was rapid, affordable, accurate, precise, sensitive, and selective.     

New benzoxazole-based sulphonamide hybrids analogs as potent inhibitors of α-amylase and α-glucosidase: Synthesis and in vitro evaluation along with in silico study

The development of drugs resistance in diabetes mellitus is a growing clinical problem, creates many challenges for patient. To overcome these problems, there is a serious deficiency of anti-diabetic agents, may be synthesized that inhibit alpha amylase and alpha glucosidase activity. Here, we have design and synthesized benzoxazole based sulphonamide derivatives and evaluated for their anti-diabetic activity. Twenty-two benzoxazole based sulphonamide derivatives were synthesized by reacting 2-aminophenol with carbon disulphide in the presence of base (Et3N) to obtained 2-marcapto benzoxazole which was further dissolved in ethanol by slow addition of different substituted phenacyl bromide in the presence of triethylamine, afforded varied S-substituted benzoxazole products. These products were dissolved in ethanol and hydrazine hydrate was added an excess in the presence of acetic acid to gives Schiff base. This Schiff base products were further dissolved in THF along with different substituted benzene sulphonyl chloride followed by addition of few drops of Et3N, yielded benzoxazole based sulphonamide derivatives (1–22). Moreover, SAR was established for the synthesized compounds and molecular docking studies were conducted for the potent moieties in order to explore the binding modalities of analogs. Among the tested series few analogues were found few folds better potential than standard drug but analog 1 (IC₅₀ = 1.10 ± 0.20 µM, 1.20 ± 0.30 µM), showed promising anti-diabetic activity against α-amylase and α-glucosidase (11.12 ± 0.15 µM and 11.29 ± 0.07 µM respectively).     

Synthesis and characterization of SmAlO<Subscript>3</Subscript> dielectric material by citrate precursor method

SmAlO₃ nanopowder synthesized by a citrate precursor method using citric acid as a chelating agent and ethylene glycol as an esterifying agent was reported in this paper. The phase purity of the as-prepared powder was examined using thermogravimetry (TG) analysis and differential scanning calorimetry (DSC) analysis, Fourier transform infrared spectroscopy (FTIR). The X-ray diffraction (XRD) studies showed that pure SmAlO₃ phase with orthorhombic perovskite structure could be synthesized at 800 °C for 2 h without any detectable intermediate phase. The average particle size calculated from transmission electron microscopy (TEM) investigation for the powder synthesized at 900 °C was as low as 45 nm. The nanopowder was sintered to a density of 97% of the theoretical density at 1,550 °C for 2 h and the bulk ceramics exhibited excellent microwave dielectric properties as follows: a dielectric constant of 20.54, a quality factor of 75,380 GHz and a temperature coefficient of resonate frequency of −69.2 ppm/K.     

Facile synthesis of a novel nanocomposite for determination of mercury and copper ions in food and water samples

This paper describes the modification of sodium aluminum silicate hydrate by 3-bromo-5-chlorosalicylaldehyde to form a new composite. Furthermore, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Transmission electron microscopy (TEM), CHN elemental analysis, Nitrogen gas sorption analyzer, and Scanning electron microscopy (SEM) tools were used for characterizing the synthesized composite. The XRD pattern of the synthesized composite shows a halo at 2Θ = 25°, confirming the destruction of the crystalline structure of the nanomaterial owing to the association with an organic substance. The synthesized composite was utilized for the removal and preconcentration of mercury and copper ions from water and food samples. The maximum adsorption capacity of the synthesized composite towards mercury and copper ions is 107.53 and 130.89 mg/g, respectively. In addition, the relative standard deviation was less than 3 %, showing excellent reproducibility. The dynamic analytical ranges are 0.8–380 μg/L and 1.00–550 μg/L for copper and mercury ions, respectively. The preconcentration factor is 10.     

Low Temperature Hydrothermal Synthesis of MnO<Subscript>2</Subscript> Nanoclusters as Positive Material of RAM Batteries

MnO₂ nanoclusters were synthesized by a low temperature hydrothermal method. In the presented procedure, MnO₂ was precipitated by oxidation of manganese sulfate solution upon addition of ammonium persulfate solution. The synthesized sample was characterized by SEM and XRD. Optimized nanoclusters with needle diameters of 30 nm were synthesized by mixing of manganese sulfate solution (0.8 M) with ammonium persulfate solution (0.7 M) in sulfuric acid media (0.8 M) at constant temperature of 80 °C. Effect of solid state lithium sulfate treatment on the phase composition, particle size and morphology of the obtained MnO₂ nanoclusters was studied at different temperatures. The obtained results showed that lithium salt can changes MnO₂ nanoclusters morphology without any intercalation. Discharge capacity and cycle life of the synthesized MnO₂ nanoclusters as positive materials of RAM battery (Zn–MnO₂ battery), before and after treatment with lithium sulfate were studied. MnO₂ nanopowder showed average discharge capacity of 190 mA.h/g (with respect to MnO₂ weight) during 3 first discharges. Lithium sulfate-treated powder showed higher discharge capacity (160 mA.h/g) and shorter cycle life than the untreated powder.     

Bi3+/Ce3+ doped ZnO nanoparticles with enhanced photocatalytic and dielectric properties

In this study, varying % Bi-doped on 1% Ce-doped ZnO (1CZ) nanoparticles (X% B-1CZ) were synthesized via a facile, simple, low-cost, sol–gel process. Various characterization techniques were employed to characterize the synthesized compound, while the dielectric properties i.e. dielectric constant, dielectric loss and AC conductivity against frequency were studied with the help of a precision impedance analyzer. It was observed that by increasing bismuth content in the nanoparticles, the dielectric constant also increased in the range (1.47 × 10⁶ – 4.02 × 10⁶) at 20 Hz, and vice versa for dielectric loss decreased from 1.05 × 10⁶ to 0.39 × 10⁶. The role of prepared compounds as photocatalysts was also investigated against methylene blue under ultraviolet irradiation. The degradation efficiency, as well as the dielectric properties of 7% Bi-doped on 1% Ce-doped ZnO (7%B-1CZ), were found to be the best. Overall, it was found that the synthesized compounds proved promising candidates with enhanced photocatalytic & dielectric properties and hence could safely be employed for environmental remediation purposes and energy storage devices.     

Synthesis of Iron Nanoclusters by Pulsed Current Method

The main objective of this research is to prepare iron nanoclusters with more porous structure by the pulsed current electrochemical method. In this method, there are some effective parameters including; pulse amplitude (current amount), pulse frequency, iron salt concentration, sulfuric acid concentration and synthesis temperature, which were optimized by the “one at a time method”. An iron optimized nanopowder was synthesized by using iron sulfate (0.005 M) as precursor and silver nitrate as a nucleation agent (at 0.5% mole of iron sulfate in the starting solution) by pulsed current of 20 mA cm⁻² with a frequency of 14 Hz. The relative gravimetrical density was used as an optimizing parameter for iron nanoparticles synthesis. The morphology and particle size of each synthesized sample was studied by SEM, TEM and XRD. The iron nanopowder synthesized in the optimum conditions has excellent uniform and a more porous structure including nanoclusters with a particle size of approximately 20–40 nm. The obtained results indicate that the pulsed current electrochemical method can be used as a confident and controllable method for the preparation of iron nanoparticles. XRD, EDX and ICP-AES results showed that the iron nanoclusters can be synthesized with high purity by the proposed method.     

Synthesis of Au–Pd bimetallic nanoparticles under energetic irradiation fields

Bimetallic Au–Pd nanoparticles were synthesized under high-energy irradiation fields (1.17 and 1.33 MeV γ-rays, 9 MeV electrons, and 1.6 GeV C ions) from solutions containing Au³⁺ and Pd²⁺ and cationic surfactant (sodium dodecyl sulfate). Particles synthesized by the irradiation were observed using conventional transmission electron microscope (TEM) and annular dark-field scanning transmission electron microscopy (ADF-STEM). The particles synthesized by γ-rays and C ion irradiation exhibit core–shell structure with a Au-core and a Pd-shell. The dependence of the size distribution of nanoparticles on the dose rate is discussed.     

Design,synthesis and biological evaluation of isoxazole-naphthalene derivatives as anti-tubulin agents

In this study, a novel series of isoxazole-naphthalene derivatives as tubulin polymerization inhibitors were designed, synthesized and evaluated for their anti-proliferative activities against human breast cancer cell line MCF-7. Most of the synthesized compounds exhibited moderate to potent antiproliferative activity (IC₅₀ < 10.0 μM), as compared to cisplatin (15.24 ± 1.27 μM). Among them, compound 5j containing 4-ethoxy substitution at phenyl ring was found to be the most active compound with IC₅₀ value of 1.23 ± 0.16 μM. Mechanistic studies revealed that compound 5j arrested cell cycle at G2/M phase and induces apoptosis. Furthermore, in vitro tubulin polymerization assay showed that compound 5j displayed better inhibition activity on tubulin polymerization (IC₅₀ = 3.4 μM) than colchicine (IC₅₀ = 7.5 μM). Molecular docking study also revealed that compound 5j binds to the colchicine binding site of tubulin.     

Expanding mesoporosity of triblock-copolymer-templated silica under weak synthesis acidity

With initial aging at low temperature for enough time, silicas with large mesoporosity were synthesized using triblock copolymer as template agent under weak acidities. SBA-15 with periodic mesostructure and short mesochannels could be synthesized at pH 2.5–3.0 within weak acidity range, and the surface areas, pore diameters and pore volumes reached up to ca. 1000 m²/g, 8.8 nm and 2.0 cm³/g, respectively, which were significantly higher than those of the conventional SBA-15 synthesized under strong acidities. Mesoporous silica with wormhole structure and abundant textural porosity was formed at pH  3.5. The increased hydrophobic volume of the copolymer micelles at elevated pH values was responsible for the enlargement of mesoporosity in the products. The materials synthesized under weak acidities showed lower hexagonal ordering in comparison to the general SBA-15 synthesized under strong acidities because the decreased hydronium ion concentration induced relatively weaker assembly forces during the synthesis. Nonetheless, the short mesochannels and large pore diameter in the products might be beneficial to some applications in which fast diffusion of molecules is required.     

Facile synthesis and characterization of β-cobalt hydroxide/hydrohausmannite/ramsdellitee/spertiniite and tenorite/cobalt manganese oxide/manganese oxide as novel nanocomposites for efficient photocatalytic degradation of methylene blue dye

In this paper, our research team has synthesized new nanocomposites by simple precipitation/ignition method and using low-cost chemicals. Hence, β-cobalt hydroxide/hydrohausmannite/ramsdellitee/spertiniite and tenorite/cobalt manganese oxide/manganese oxide new nanocomposites were synthesized by precipitation of Mn(II)/Co(II)/Cu(II) solution using sodium hydroxide and ignition of precipitate at 700 °C for 3 hrs, respectively. The synthesized nanocomposites were characterized using different instruments such as energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), nitrogen gas sorption analyzer, and UV–vis spectrophotometer. Energy dispersive X-ray analysis revealed that the nanocomposite formed as a result of precipitation consists of copper, cobalt, manganese, and oxygen where the weight percentages are equal to 31.73, 27.01, 17.26, and 24 %, respectively. Also, the nanocomposite formed as a result of ignition consists of copper, cobalt, manganese, and oxygen where the weight percentages are equal to 31.26, 23.87, 14.56, and 30.31 %, respectively. Transmission electron microscope revealed that the nanocomposites formed as a result of precipitation and ignition consist of polyhedral and spherical shapes with an average diameter of 34.50 and 28.56 nm, respectively. The synthesized nanocomposites were used as new photocatalysts for the efficient degradation of methylene blue dye. 0.05 g of the synthesized nanocomposites degrade 100 % of 50 mL of 15 mg/L of methylene blue dye solution within 25 min in the presence of H₂O₂ under UV light.     

Green synthesis of plant-stabilized Au nanoparticles for the treatment of gastric carcinoma

In this study, gold nanoparticles (AuNPs) were green synthesized using plant extract. The obtained nanoparticles (Au NPs) were characterized by advanced physical and chemical techniques like TEM, FTIR, UV–vis, SEM, XRD and EDX. SEM image displayed the quasi-spherical shaped nanoparticles of mean diameter 20–50 nm. All the particles were of uniform shape and texture. From the XRD pattern, four distinct diffraction peaks at 38.2°, 44.2°, 64.7° and 77.4° are indexed as (1 1 1), (2 0 0), (2 2 0) and (3 1 1) planes of fcc metallic gold. The in vitro cytotoxic and anti-gastric carcinoma effects of biologically synthesized Au NPs against cancer cell lines were assessed. The IC₅₀ of the Au NPs were 192, 149, 76 and 85 µg/mL against NCI-N87, MKN45, GC1401 and GC1436 gastric cancer cell lines. The anti-gastric carcinoma properties of the Au NPs could significantly remove the cancer cell lines in a time and concentration-dependent manner. So, the findings of the recent research show that biologically synthesized Au NPs might be used to cure cancer.     

Synthesis and application of fluorescent N,S co-doped carbon dots based on on-off-on quenching mode for the collaboration detection of iron ions and ascorbic acid

Nitrogen and sulfur co-doped carbon dots (NS-CDs) were synthesized by one-step solvothermal method using oleic acid as the medium, ʟ-cystine and citric acid monohydrate as precursors. Based on the “on-off-on” fluorescence quenching mode, a novel method was established for determination of both Fe³⁺ and ascorbic acid. The synthesized NS-CDs can be employed as fluorescence chemical sensors for the direct determination of free iron in the aqueous phase and indirect determination of the ascorbic acid contents of vitamin C tablets with linear ranges of 0–10 μM (n = 3) and 0–30 μM (n = 3), and detection limits of 36.6 and 102.5 nM, respectively. These results demonstrate that the proposed method exhibits good selectivity and linearity.     

Activity of 5% CuO/Ce1 – xPrxOy Catalysts in the Reaction of Carbon Monoxide Oxidation with Oxygen in an Excess of Hydrogen

Kinetics and Catalysis - The 5% CuO/Ce1 –&nbsp;xPrxOy catalysts were synthesized on the basis of CeO2 and PrO2 oxides and Ce1&nbsp;–&nbsp;xPrxOy solid solutions with x =...     

Mg doping improving the cycle stability of LiNi0.5Mn0.5O2 at high voltage

Journal of Solid State Electrochemistry - A series of LiNi0.5-x Mg x Mn0.5O2 (0&nbsp;≤&nbsp;x&nbsp;≤&nbsp;0.1) samples are synthesized by a combination of...     

Scalable one-pot synthesis of bismuth sulfide nanorods as an electrode active material for energy storage applications

The quest for developing the scalable methods of synthesis of materials with potential electrochemical energy storage applications remains a great challenge. Herein, we propose a facile, one-step chemical precipitation method for the synthesis of Bi₂S₃ with the nanorods morphology. Influence of different synthesis temperatures on the physical, chemical, and electrochemical performance was investigated. Relatively low BET surface area and mesopore volume of Bi₂S₃ increased with the higher reaction temperature. Bismuth sulfides synthesized at various temperatures were used as an electrode active material in supercapacitor. The semiconductive properties of Bi₂S₃ resulted in exceptional capacitive behavior. Bismuth sulfide synthesized at 75 °C exhibited a specific capacitance of 457 F g⁻¹ at 1 A g⁻¹ in 6 mol L⁻¹ KOH solution as an electrolyte. Moreover, material prepared at 75 °C maintained the best capacitance value at a large current density of 20 A g⁻¹, compared with bismuth sulfides synthesized at the temperatures of 0 °C and 25 °C.

     

Influence of biomass and gold salt concentration on nanoparticle synthesis by the tropical marine yeast Yarrowia lipolytica NCIM 3589

Cell-associated gold nanoparticles and nanoplates were produced when varying number of Yarrowia lipolytica cells were incubated with different concentrations of chloroauric acid (HAuCl₄) at pH 4.5. With 10⁹ cells ml⁻¹ and 0.5 or 1.0 mM of the gold salt, the reaction mixtures developed a purple or golden red colour, respectively, and gold nanoparticles were synthesized. Nanoparticles of varying sizes were produced when 10¹⁰ cells ml⁻¹ were incubated with 0.5, 1.0 or 2.0 mM chloroauric acid salt. With 3.0, 4.0 or 5.0 mM HAuCl₄, nanoplates were also observed. With 10¹¹ cells ml⁻¹ nanoparticles were synthesized with almost all the gold salt concentrations. The cell-associated particles were released outside when nanoparticle-loaded cells were incubated at low temperature (20 °C) for 48 h. With increasing salt concentrations and a fixed number of cells, the size of the nanoparticles progressively increased. On the other hand, with increasing cell numbers and a constant gold salt concentration, the size of nanoparticles decreased. These results indicate that by varying the number of cells and the gold salt concentration, a variety of nanoparticles and nanoplates can be synthesized. Fourier transform infrared (FTIR) spectroscopy revealed the possible involvement of carboxyl, hydroxyl and amide groups on the cell surfaces in nanoparticle synthesis.