The persistent radical effect in organic synthesis

The persistent radical effect (PRE) is a principle that explains the highly selective cross-coupling between a persistent and a transient radical when both species are formed at equal rates. In this paper, the concept of the PRE is briefly discussed. Applications of the PRE in different reactions such as Co-mediated radical addition and cyclization reactions, Kharasch reactions catalyzed by transition metals, the Barton reaction, and our nitroxide-mediated tin-free radical cyclizations are presented. Some future perspectives for the PRE in organic synthesis are also provided.     

Nitroxides: applications in synthesis and in polymer chemistry

This Review describes the application of nitroxides to synthesis and polymer chemistry. The synthesis and physical properties of nitroxides are discussed first. The largest section focuses on their application as stoichiometric and catalytic oxidants in organic synthesis. The oxidation of alcohols and carbanions, as well as oxidative C-C bond-forming reactions are presented along with other typical oxidative transformations. A section is also dedicated to the extensive use of nitroxides as trapping reagents for C-centered radicals in radical chemistry. Alkoxyamines derived from nitroxides are shown to be highly useful precursors of C-centered radicals in synthesis and also in polymer chemistry. The last section discusses the basics of nitroxide-mediated radical polymerization (NMP) and also highlights new developments in the synthesis of complex polymer architectures.     

水介质中可控/活性自由基聚合的研究进展

综述了均相水溶液体系和分散，悬浮，乳液及微乳液等非均匀相水溶液体系中的可控／活性自由基聚合的研究现状，对一些最常见的可控自由基聚合方法，如氮氧调控聚合，原子转移自由基聚合和可逆加成－继裂链转移聚合方法的聚合情况进行了详细的介绍，展望了水介质中可控／活性自由基聚合的发展方向及前景。     

Tin-free radical alkoxyamine addition and isomerization reactions by using the persistent radical effect: variation of the alkoxyamine structure

Various C-centered radicals can efficiently be generated through thermal C-O-bond homolysis of alkoxyamines. This method is used to perform environmentally benign radical cyclization and intermolecular addition reactions. These alkoxyamine isomerizations and intermolecular carboaminoxylations are mediated by the persistent radical effect (PRE). In the paper, the effect of the variation of the alkoxyamine structure--in particular steric effects in the nitroxide moiety--on the outcome of the PRE mediated radical reactions will be discussed. Fourteen different nitroxides were used in the studies. It will be shown that reaction times can be shortened about 100 times upon careful tuning of the alkoxyamine structure. Activation energies for the C-O-bond homolysis of the various alkoxyamines are provided. The kinetic data are used to explain the reaction outcome of the PRE-mediated processes.     

Molecular Radical Chain Initiators for Ambient‐ to Low‐Temperature Applications

An overview of methods for the initiation of radical chain reactions by specific initiator compounds, which generate radicals, is given. These can be utilized to initiate any kind of radical chain reaction by transforming substrates into the desired radical intermediates. Azo initiators, peroxides, nitroxides, trialkylboranes, dialkyl zinc compounds, and type I photoinitiators are discussed, as well as methods of redox‐ and sonochemical initiation. Methods of direct radical formation from the substrates, such as photoredox catalysis or high‐energy irradiation, are not included. The focus of this review lies on rather “low” temperatures in the range of 50 °C down to ?78 °C, which can be useful to achieve more selective reactions. Illustrative applications of such radical chain initiators in a variety of reactions are discussed, including stereoselective ones and polymerizations.     

光调控的活性自由基聚合的研究新进展

从引发和催化两个方面概述了光辐照在活性自由基聚合(LRP)中的应用,从机理上详细地分析了光辐照对氮氧调控自由基聚合(NMP)、原子转移自由基聚合(ATRP)、可逆加成-断裂链转移自由基聚合(RAFT)以及有机钴催化的可控自由基聚合反应(CMRP)的影响。与传统自由基聚合相比,光调控的活性自由基聚合方法可在温和的条件下生成自由基,能够克服传统LRP的一些缺陷,如降低催化反应活化能、提高聚合物末端官能度等。同时,本文对光调控反应的进一步应用以及新方法的产生也进行了展望。     

“点击”反应在制备环状聚合物中的应用

环状聚合物具有不同于线性高分子的独特性质,是一类具有应用前景的新型聚合物材料,但复杂的结构导致其合成过程复杂繁琐.＂点击＂化学由于其高效、可靠、高选择性的特点已成为拓扑高分子合成的新方法,活性自由基聚合（ATRP、RAFT和NMP）具有聚合物结构可控等特点,二者联用为环状聚合物的合成拓宽了思路.本文就近几年＂点击＂反应、＂点击＂反应与活性自由基聚合联用以及其他方法联用在环状聚合物中的应用进行综述.＂点击＂反应与这些方法的结合将在功能性环状聚合物的设计与合成中发挥积极的作用.     

Living Radical Polymerization of Styrene Derivatives Containing Trialkylmetal Groups

Fourteenth group oganometallic styrene derivatives were synthesised by nitroxide-mediated controlled radical polymerization using di-tert butyl nitroxide (A-T) as initiator. This is the first time that nitroxide-controlled radical polymerization has been successfully adapted for the synthesis of new polystyrenes bearing organometallic species with controlled molecular weights and narrow polydispersities. Monomer reactivity ratios were determined in controlled nitroxide-mediated radical copolymerization between styrene and substituted styrene. All experiments permitted the synthesis of new organometallic polymers that will be used for the development of a polymer capsule for Inertial Confinement Fusion Experiments.     

Modified cubic spherosilicates as macroinitiators for the synthesis of inorganic–organic starlike polymers

Modified cubic spherosilicate cages of the type [Si₈O₂₀]^8? were used as rigid, inorganic cores for the synthesis of macroinitiators for thermal and photoinduced free radical and controlled radical polymerizations. Two different routes to these macroinitiators were investigated: the direct modification of the octaanion with chlorosilane‐functionalized initiators and the hydrosilation of SiH‐substituted cages. The latter synthesis of the macroinitiators resulted in more defined reaction products. With these compounds, the polymerizations of styrene and methyl methacrylate were carried out. The free radical polymerizations showed broad polydispersities based on coupling reactions, whereas the copper‐mediated atom transfer radical polymerizations (ATRP) revealed that good polymerization control could be achieved with the prepared initiators. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3858–3872, 2002     

Orthogonal synthesis and modification of polymer materials

In this review, we detail the progress throughout the years toward developing truly orthogonal polymerization mechanisms and modification procedures en route to complex macromolecular structures built from synthetic polymer materials. The orthogonal modifications of polymer side-chains and end-groups via sequential click reactions is described providing post-polymerization routes to functional materials and unique polymer topologies. Further, historical and modern orthogonal polymerization methodologies are thoroughly reviewed showing the evolution of the field through the decades long study of selective polymerization mechanisms that provide unique copolymer structures that are typically difficult to achieve. These include the combinations of reversible deactivation radical polymerization mechanisms with a variety of polymerization mechanisms including ring opening polymerizations, ring opening metathesis polymerizations, and cationic polymerizations, to name a few.     

The Persistent Radical Effect in Organic Synthesis

Radical–radical couplings are mostly nearly diffusion‐controlled processes. Therefore, the selective cross‐coupling of two different radicals is challenging and not a synthetically valuable transformation. However, if the radicals have different lifetimes and if they are generated at equal rates, cross‐coupling will become the dominant process. This high cross‐selectivity is based on a kinetic phenomenon called the persistent radical effect (PRE). In this Review, an explanation of the PRE supported by simulations of simple model systems is provided. Radical stabilities are discussed within the context of their lifetimes, and various examples of PRE‐mediated radical–radical couplings in synthesis are summarized. It is shown that the PRE is not restricted to the coupling of a persistent with a transient radical. If one coupling partner is longer‐lived than the other transient radical, the PRE operates and high cross‐selectivity is achieved. This important point expands the scope of PRE‐mediated radical chemistry. The Review is divided into two parts, namely 1) the coupling of persistent or longer‐lived organic radicals and 2) “radical–metal crossover reactions”; here, metal‐centered radical species and more generally longer‐lived transition‐metal complexes that are able to react with radicals are discussed—a field that has flourished recently.     

Recent progress in nitroxide-mediated polymerizations in miniemulsion

Recent developments in nitroxide-mediated polymerizations conducted in emulsion and miniemulsion have advanced the field across a range of both experimental and theoretical fronts. This article reviews progress in bicomponent initiating systems (including use of camphorsulfonic acid to enhance rate), unimolecular initiating systems, miniemulsions not requiring the use of volatile costabilizers, polymerization of acrylates, mathematical modeling and simulation, and theoretical understanding with regards to issues such as compartmentalization, preservation of polymer chain livingness, the role of aqueous phase kinetics and phase partitioning. These topics are discussed and analyzed to present an integrated portrait of the current status of nitroxide-mediated polymerizations in emulsion/miniemulsion and to identify the most pressing concerns, issues, and opportunities. To cite this article: M.F. Cunningham, C. R. Chimie 6 (2003).     

The reversible addition‐fragmentation chain transfer process and the strength and limitations of modeling: Comment on “the magnitude of the fragmentation rate coefficient”

There is appreciable uncertainty concerning the magnitude of the fragmentation rate coefficient of the intermediate radical in reversible addition‐fragmentation chain transfer (RAFT) polymerizations. A large proportion of the experimental and theoretical evidence suggests that it is a stable species with a lifetime longer than 0.0001 s. This is particularly the case when the intermediate macro‐RAFT radical is stabilized by a phenyl group attached to the radical center or has a poor leaving group. Although the occurrence to some extent of irreversible termination reactions cannot be excluded, we argue that such reactions are more likely to be a result of slow fragmentation of the intermediate macro‐RAFT radical. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2828–2832, 2003     

Nitroxide-mediated precipitation polymerization of styrene in supercritical carbon dioxide: Effects of monomer loading and nitroxide partitioning on control

Nitroxide-mediated solution and precipitation polymerizations of styrene in toluene and supercritical carbon dioxide (scCO₂), respectively, using the nitroxides N-tert-butyl-N-[1-diethylphosphono-(2,2-dimethylpropyl)]nitroxide (SG1) and 2,2,5-trimethyl-4-phenyl-3-azahexane-3-nitroxide (TIPNO) are presented. Solution polymerizations are compared with simulations using PREDICI software, revealing that differences in the polymerization behaviours between the SG1- and TIPNO-mediated systems cannot be rationalized based on literature rate coefficients and the ideal mechanism for nitroxide-mediated polymerization. Nitroxide and monomer partitioning between the polymer particles and the continuous phase play important roles in the precipitation polymerizations in scCO₂. Loss of control (broader molecular weight distributions) as a result of nitroxide partitioning is accentuated at low monomer loading, and is significantly more pronounced for TIPNO than SG1. However, at higher monomer loading the level of control was superior in scCO₂ compared to in the corresponding solution polymerizations for both nitroxides, most likely caused by an increase in the number of activation-deactivation cycles experienced by any given chain during its growth.     

Free‐radical‐promoted cationic photopolymerization under visible light in aerated media: New and highly efficient silane‐containing initiating systems

New systems for the visible‐light‐induced polymerization of cationic resins working through a free‐radical‐promoted process are presented. They are based on a photoinitiator (camphorquinone, isopropylthioxanthone, Eosin), a silane, and a diphenyl iodonium salt, the new compound being the silane. The overall efficiency is strongly affected by the silane structure. The rates of polymerization and final percent conversion are noticeably higher than those obtained in the presence of already studied reference systems. Moreover, contrary to previously investigated free‐radical‐promoted cationic polymerizations, oxygen does not inhibit the process and an unusual enhancement of the polymerization kinetics is found in aerated conditions: such an observation seems to have never been reported so far. The excited state processes and the role of oxygen as revealed by laser flash photolysis are discussed. The particular behavior of the silyl radicals is outlined. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2008–2014, 2008     

Organic and polymer chemistry of electrophilic tri‐ and tetrasubstituted ethylenes

A survey of the spontaneous reactions of electrophilic olefins and nucleophilic olefins is presented as an area in which organic chemistry merges with polymer chemistry. The products include both small molecules and polymers, arising via tetramethylene biradical zwitterions that can cyclize or initiate polymerizations. Electrophilic tri‐ and tetrasubstituted olefins are particularly useful in delineating the transition from radical chemistry to ionic chemistry. A periodic table embodying these results enables predictions. Charge‐transfer complexes, although observed in many of these reactions, play no significant role. Various aspects arising from these investigations include new cationic initiators, Lewis acid catalysis, quinodimethane chemistry, and photochemistry. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2845–2858, 2004     

Iniferter concept and living radical polymerization

Iniferters are initiators that induce radical polymerization that proceeds via initiation, propagation, primary radical termination, and transfer to initiator. Because bimolecular termination and other transfer reactions are negligible, these polymerizations are performed by the insertion of the monomer molecules into the iniferter bond, leading to polymers with two iniferter fragments at the chain ends. The use of well‐designed iniferters would give polymers or oligomers bearing controlled end groups. If the end groups of the polymers obtained by a suitable iniferter serve further as a polymeric iniferter, these polymerizations proceed by a living radical polymerization mechanism in a homogeneous system. In these cases, the iniferters (C S bond) are considered a dormant species of the initiating and propagating radicals. In this article, I describe the history, ideas, and some characteristics of iniferters and living radical polymerization with some iniferters that contain dithiocarbamate groups as photoiniferters and several compounds as thermal iniferters. From the viewpoint of controlled polymer synthesis, iniferters can be classified into several types: thermal or photoiniferters; monomeric, polymeric, or gel iniferters; monofunctional, difunctional, trifunctional, or polyfunctional iniferters; monomer or macromonomer iniferters; and so forth. These lead to the synthesis of various monofunctional, telechelic, block, graft, star, and crosslinked polymers. The relations between this work and other recent studies are discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2121–2136, 2000     

合成不同拓扑结构聚合物的一个简便策略

随着高分子化学的进步, 特别是可控自由基聚合反应的发现, 不同拓扑结构聚合物的合成己获得了巨大的进展. 为合成这些复杂结构的聚合物, 人们成功地研究了不同的聚合方法. 其中, 不同功能团引发剂方法是较为方便和可行的方法之一, 并且已广泛用于不同结构聚合物的合成. 本文综述了用该方法合成不同拓扑结构聚合物, 包括嵌段、杂臂星形、H-形、π-形、接枝和环状聚合物所取得的进展, 特别强调的是这篇论文没有覆盖这方面的所有研究工作. 这一合成方法的思路是基于将不同聚合反应, 尤其是不同可控聚合反应相结合, 或者将可控聚合与不同的偶合反应, 例如与点击反应、Diel-Alder反应和活性酯反应等相结合. 所讨论的多功能引发剂不仅包括小分子化合物, 也包括带有两个和两个以上引发基团或链转移基团的聚合物. 后者称为大分子多功能团引发剂, 可以独立引发不同的聚合反应.     

Kinetics of Nitroxide Mediated Radical Polymerization of Styrene with Unimolecular Initiators

Summary: This study examined the kinetics of nitroxide-mediated radical polymerization of styrene with unimolecular (alkoxyamine) initiators. Control of polymerization rate and polymer molecular weight in unimolecular nitroxide-mediated radical polymerization was studied by looking at the effects of the three main factors: initiator concentration, temperature, and initiator molecular weight on polymerization rate, molecular weight and polydispersity. In addition, the behavior of the unimolecular initiating systems was compared to that of the corresponding bimolecular system. The effective TEMPO concentration and degree of self-initiation of styrene were proved to be significant in dictating magnitudes of molecular weight averages and widths of molecular weight distribution.     

Designing functional aromatic multisulfonyl chloride initiators for complex organic synthesis by living radical polymerization

The similarities and differences between sulfonyl chloride and alkyl halide initiators for metal‐catalyzed living radical polymerizations are discussed. The differences in the rates of formation, reactivities, and reactions of primary radicals derived from sulfonyl halides and alkyl halides demonstrated the design principles for monosulfonyl and multisulfonyl chlorides that provided quantitative initiation and higher rates of initiation than of propagation. Multifunctional initiators with two, three, four, six, and eight sulfonyl chloride groups that produced perfect star polymers in 95% conversions were designed and synthesized on the basis of these principles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4776–4791, 2000