Trimethyl borate-induced one-pot homologation reactions of isoquinoline with di-tert-butyl-TMP zincate

Novel one-pot homologation reactions of isoquinoline and quinoline with di-tert-butyl-TMP zincate/trimethyl borate are described. 1-tert-Butyl-3,4-dihydroisoquinoline 1 and 1-tert-butylisoquinoline 2 are formed unexpectedly under the presented reaction conditions with relative ease. A reaction mechanism, including 1,2-migration of the tert-butyl group from 1-isoquinolylzincate, is proposed in detail. Migratory aptitudes of other ligands of isoquinolyl zincates are also discussed.     

Structural and thermal interpretation of the synergy and interactions between the fire retardants magnesium hydroxide and zinc borate

The mechanism of cooperative action of commercial fire retardants is interpreted as resulting from specific chemical reaction and phase changes. This investigation focuses on the thermally initiated interactions between two forms of commercially available fire retardant compounds. The fire performance of a polyolefin with a metal hydroxide fire retardant, magnesium hydroxide, can significantly reduce the heat release rate through absorption of heat during conversion to its metal oxide. Formation of water, followed by vaporisation, decreases heat and dilutes volatiles from polymer degradation. The second form of fire retardant compounds are zinc borates (2ZnO·3B₂O₃·3H₂O and 4ZnO·B₂O₃·H₂O), that undergo dehydration with increasing temperature. Differential thermal analysis and wide-angle X-ray spectroscopy indicated that various structural changes occurred during heating. Endothermic transitions were observed for all components, while zinc borate (2ZnO·3B₂O₃·3H₂O) showed an exothermic crystallisation transition at relatively high temperature. The exotherm was modified by the development of a new crystalline phase, magnesium orthoborate (3MgO·B₂O₃) that formed on reaction with magnesium oxide (MgO) at temperatures greater than 500 °C. Formation of crystalline zinc oxide (ZnO) was also detected. From zinc borate (4ZnO·B₂O₃·H₂O), ZnO was primarily formed. No new crystalline phases were observed in the presence of MgO over the temperature range investigated.     

Novel synthesis of 4-halo-3-hydroxy-2-pyrone: one pot rearrangement-cyclization reaction by magnesium halide

Treatment of acetonide protected 4,5-dihydroxy-2-chloroglycidic ester or its rearrangement product, the acetonide protected 4,5-dihydroxy-3-chloro-2-oxo ester, with magnesium halides gave 4-halo-3-hydroxy-2-pyrone in excellent to reasonable yields in one pot. The mechanism of this novel one pot rearrangement-cyclization reaction is also proposed.     

The Crystal Structure of Trimethyl Borate by Neutron and X‐ray Powder Diffraction

The crystal structure of one of the simplest organoboron compounds, trimethyl borate does not appear to have been determined hitherto. The compound is of interest for the study of π‐donor ligands and their interaction with the π‐acceptor behavior of trigonal boron and the consequences of such interactions on molecular structure. We used powder neutron (with isotopically labeled material) and X‐ray diffraction to determine the crystal structure of trimethyl borate at 15 K and 200 K (neutron) and 200 K (X‐ray). The material is hexagonal (Z = 2) with a = b = 6.950(8) Å and c = 6.501(3) Å at 15 K. The unit cell volume is 272.00(1) ų. The space group is P6₃/m (SG 176) at 15 K and 200 K. This is the first crystal structure solved on the Neutron Powder Diffractometer (NPDF) at the Lujan Center.     

A convenient method to reduce hydroxyl-substituted aromatic carboxylic acid with NaBH4/Me2SO4/B(OMe)3

The reduction of hydroxyl-substituted aromatic carboxylic acid with NaBH₄/Me₂SO₄/B(OMe)₃ is described. Borane is generated by the reaction of NaBH₄ with Me₂SO₄ in THF, which is as efficient as the commercial one. B(OMe)₃ has been successfully applied to increase the reactivity and selectivity of this reaction. The optimum ratio of borane/B(OMe)₃/acid is studied, and a variety of hydroxyl-substituted aromatic acids are reduced in good yields.     

Convenient one-pot procedure for synthesizing 4,4′-dimethoxy-boradiaza-s-indacene dyes and their application to cell labeling

We succeeded in developing a convenient one-pot pathway for synthesizing 4,4′-dimethoxy-boradiaza-s-indacene dyes 4a-d. The structures feature two methoxy groups in place of the fluorine atoms in 4,4′-difluoro-4-boradiaza-s-indacene. These novel dyes emitted green fluorescence and possessed moderate to high fluorescence quantum yields (Φ=0.32-0.93). We demonstrated that these dyes have applicability to cell labeling.     

Petasis reaction of activated quinoline and isoquinoline with various boronic acids

Petasis reactions of activated forms of quinolines and isoquinolines with electron sufficient boronic acids such as 2-benzofuranboronic acid, trans-2-phenylvinylboronic acid etc in DCM proceeded smoothly at room temperature to provide the corresponding dihydroquinolines and dihydroisoquinolines in good to high yields.     

Living cationic polymerization of vinyl ethers by electrophile/lewis acid initiating systems. VII. Living cationic polymerization of isobutyl vinyl ether by trimethylsilyl halide/zinc halide initiating systems in the presence of p-methoxybenzaldehyde: Effects of halide anions and zinc halides

Trimethylsilyl halides (Me₃SiY), in conjunction with zinc halides (ZnX₂) (Y and X:I, Br, Cl), were employed to investigate the living cationic polymerization of isobutyl vinyl ether (IBVE) in toluene at ?15°C in the presence of p-methoxybenzaldehyde; with the aldehyde and IBVE monomer, Me₃SiY yields an initiating species [Me₃Si? O? CHC₆H₄(OM_e) ? CH₂CH(OiBu) ? Y] that triggers the IBVE polymerization via the activation of its carbon-halogen bond (C? Y) by ZnX₂ into C^δ+…?Y^δ?…?ZnX₂. Living polymerizations occurred with the silyl iodide and bromide irrespective of the type of ZnX₂, either when Y = X (Me₃Sil/Znl₂ and Me₃SiBr/ZnBr₂) or when Y ≠ X (Me₃Sil/ZnBr₂, Me₃SiI/ZnCl₂, and Me₃SiBr/Znl₂). With these five initiating systems, the number-average molecular weights (M?_n) of the polymers increased in proportion to monomer conversion, and the molecular weight distributions (MWDs) of the polymers were narrow (M?_w/M?_n = 1.1?1.2). The Me₃SiCl-based systems (Me₃SiCl/ZnCl₂ and Me₃SiCl/Znl₂), in (Me₃SiCl/Znl₂), in contrast, failed to give perfectly living polymerization; the M?_n indeed increased with conversion, but the MWDs of the polymers were broader (M?_w/M?_n = 1.3?1.5). Thus, the living nature of the polymerizations with Me₃SiY/Znx₂ is primarily determined by the halogen Y in Me₃SiY, which generates the terminal carbon-halogen bond (C? Y) that is activated by ZnX₂ for the propagation via a species C^δ+…?Y^δ?…?ZnX₂. For Y^?, not only the iodide but the bromide anion also is suited for living cationic polymerization. The virtual absence of the effects of X in ZnX₂ implies that the halogen exchange between ZnX₂ and Y from Me₃ SiY at the growing end (C^λ+…?Y^δ?…?ZnX₂ ?C^δ+…?X^δ?…?ZnXY) is absent or negligible.     

A synthesis of pyrrolo[2,1-a]isoquinolines through the reaction of activated acetylenes and isoquinoline in the presence of ethyl bromopyruvate

Isoquinoline reacts with ethyl bromopyruvate in the presence of dialkyl acetylenedicarboxylates or diaryloylacetylenes to produce dialkyl 1-(2-ethoxy-2-oxoacetyl)pyrrolo[2,1-a]isoquinoline-2,3-dicarboxylates or ethyl 2-[2,3-diaryloylpyrrolo[2,1-a]isoquinoline-1-yl]-2-oxoacetates in good yields.     

Fluoride-mediated selective cross-coupling reactions of alkyl halides and trimethyl(perfluoroalkyl)silanes, Me3SiRf (Rf = CF3, C2F5) in the absence of any catalysts

A temperature range of −18 °C to room temperature was found to be effective for selective fluoride-mediated cross-coupling reactions of trimethyl(perfluoroalkyl)silanes, Me₃SiCF₃ and Me₃SiC₂F₅, and alkyl halides, RX (X = Br, I) in the absence of any catalyst.     

Quantitative determination of isoquinoline alkaloids and chlorogenic acid in Berberis species using ultra high performance liquid chromatography with hybrid triple quadrupole linear ion trap mass spectrometry

Berberis species are well known and used extensively as medicinal plants in traditional medicine. They have many medicinal values attributable to the presence of alkaloids having different pharmacological activities. In this study, a method was developed and validated as per international conference on harmonization guidelines using ultra high performance liquid chromatography with hybrid triple quadrupole‐linear ion trap mass spectrometry operated in the multiple reaction monitoring mode for nine bioactive compounds, including protoberberine alkaloids, aporphine alkaloids and chlorogenic acid. This method was applied in different plant parts of eight Berberis species to determine variations in content of nine bioactive compounds. The separation was achieved on an ACQUITY UPLC CSH? C₁₈ column using a gradient mobile phase at flow rate 0.3 mL/min. Calibration curves for all the nine analytes provided optimum linear detector response (with R² ≥0.9989) over the concentration range of 0.5–1000 ng/mL. The precision and accuracy were within RSDs ≤2.4 and ≤2.3%, respectively. The results indicated significant variation in the total contents of the nine compounds in Berberis species.     

Synthesis, structure characterization and fluorescence property of a new fluoride borate crystal, CdZn2KB2O6F

A new fluoride borate crystal, CdZn₂KB₂O₆F, has been synthesized by flux-supported solid-state reaction. The crystal structure has been determined by single-crystal X-ray diffraction. It crystallizes in the trigonal space group with a=5.0381(6) Å, b=5.0381(6) Å, c=15.1550(19) Å, α=90.00°, β=90.00°, γ=120.00°, Z=2. The crystal represents a new structure type in which ZnBO₃ layers are connected through bridging fluorine and cadmium atoms alternately along the c-axis. K⁺ cations are filled in the intralayer open channels to balance charge. IR and Raman spectra further confirm the crystal structure. Photoluminescent measurement reveals that CdZn₂KB₂O₆F exhibits blue fluorescence at room temperature in the solid-state.     

碳苷研究II.卤代酰化呋喃核糖及阿拉伯糖与取代芳基溴化镁的反应

本文探讨了1-氯-2,3,5-三(O-苯甲酰)-α-D-呋喃核糖及1-溴-2,3,5-三(O-苯甲酰)-α-D-呋喃阿拉伯糖与取代芳基溴化镁的反应,反应产物经旋转薄层层析,用环己烷-乙醚梯度洗脱,成功地分离了端基异构体,得碳苷类化合物三十二个,通过1HNMR指定了它们的构型,结果表明,格氏试剂苯环上的取代基对上述两系列糖基化反应所生成的端基异构产物的相对比例有一致的影响。当苯环上的取代基仅显示电性效应时,产物中α-异构体占优势;当苯环上的取代基既显示电性效应又显示位阻效应时,产物中α-异构体的相对比例下降;当苯环上的取代基的位阻效应足够大时,产物中β-异构体占优势。     

High-pressure synthesis and crystal structure of the lithium borate HP-LiB3O5

The new lithium borate HP-LiB₃O₅ was synthesized under high-pressure/high-temperature conditions of 6 GPa and 1050 °C in a multianvil press with a Walker-type module. The compound crystallizes in the space group Pnma (no. 62) with the lattice parameters a=829.7(2), b=759.6(2), and c=1726.8(4) pm (Z=16). The high-pressure compound HP-LiB₃O₅ is built up from a three-dimensional network of BO₄ tetrahedra and BO₃ groups, which incorporates Li⁺ ions in channels along the b-axis. Band assignments of measured IR- and Raman spectra were done via quantum-mechanical calculations. Additionally, the thermal behavior of HP-LiB₃O₅ was investigated.     

A ruthenium(II) complex of bis (1-pyrazolyl) borate

A new neutral ruthenium(II) complex of dihydro-bis(1-pyrazolyl) borate is synthesised by the reaction of RuCl₂(PPh₃)₃ with the ligand in methanol and is characterised on the basis ofir and³¹P{¹H}nmr spectra.     

Direct alkenylation of arylamines at the ortho-position with magnesium alkylidene carbenoids and some theoretical studies of the reactions

1-Chlorovinyl p-tolyl sulfoxides were synthesized from ketones and chloromethyl p-tolyl sulfoxide in high yields. Treatment of the sulfoxides with isopropylmagnesium chloride at −78 °C in toluene gave magnesium alkylidene carbenoids (α-chloro alkenylmagnesium chlorides), which were treated with N-lithio arylamines to afford ortho-alkenylated arylamines in moderate yields. The reaction, in some cases, proceeded in a highly stereospecific manner at the carbon bearing the chlorine and the sulfinyl group. The structures of the α-chloro alkenylmagnesium chlorides and the reactivity of the N-lithio meta-substituted anilines were studied at the B3LYP and MP2 levels of theory with the 6-31(+)G* basis set. This reaction offers a quite novel and direct alkenylation of arylamines at the ortho-position of the aromatic ring.     

Catalytic performance of chitosan‐Schiff base supported Pd/Co bimetallic catalyst for acrylamide with phenyl halide

The chitosan‐Schiff base supported palladium and cobalt bimetallic complex was synthesized in a simple method and characterized by Fourier‐transform infrared spectroscopy (FT‐IR), powder X‐ray diffraction (XRD), and X‐ray photoelectron spectra (XPS). It was found that the catalyst has great activity and stability in the coupling of acrylamide (AA) with the phenyl halide. The influence of various bimetallic catalysts, the different molar ratio of Co/Pd, the bases, the amount of the catalyst and base, and the molar ratio of iodobenzene/AA on the reaction were investigated. The results showed that the catalytic activity of the molar ratio of Co/Pd (3/1) was the best when the iodobenzene was used as a substrate. The yield of the cinnamamide did not change significantly after ten runs. It has been revealed that the catalyst was efficient for the reaction. Copyright © 2009 John Wiley & Sons, Ltd.     

High-pressure synthesis and crystal structure of the mixed-valent titanium borate Ti5B12O26

The new titanium borate was synthesized under high-pressure/high-temperature conditions in a Walker-type multianvil apparatus at 7.5 GPa and 1350 °C. Ti₅B₁₂O₂₆ is built up exclusively from corner-sharing BO₄-tetrahedra and shows a structural relation to the Zintl phase NaTl. Consisting of B₁₂O₂₆-clusters as fundamental building blocks, the structure of Ti₅B₁₂O₂₆ can be described via two interpenetrating diamond structures as in NaTl, where each atom corresponds to one B₁₂O₂₆-cluster. The tetragonal titanium borate crystallizes with eight formula units in the space group I4₁/acd and exhibits lattice parameters of a=1121.1(2) pm and c=2211.5(4) pm. Ti₅B₁₂O₂₆ is a mixed-valent compound with Ti^III and Ti^IV cations. The environment of the titanium cations, as well as charge distribution calculations, leads us to the assumption that Ti^III and Ti^IV are located on different crystallographic sites.     

Palladium-catalyzed phenyl-selenylation with n-Bu3SnSePh in one-pot two-step reactions

We have studied the Pd-catalyzed cross-coupling reaction of a stannane derived from selenium n-Bu₃SnSePh (1) with aryl and perfluoroalkyl iodides. Herein a very efficient one-pot two-step selenylation reaction to form a C-Se bond is reported. Ph₂Se₂ reacts with Na metal in liquid ammonia yielding PhSe⁻ ions. To this solution n-Bu₃SnCl was added to afford 1, which was introduced in the palladium-catalyzed coupling reaction without isolation. These reactions afford functionalized diarylselenides and phenylperfluroalkyl selenides from good to high yields (38-98%).