Mild and Efficient Deoxygenation of Sulfoxides to Sulfides Using HfCl4/KBH4 System

HfCl₄/KBH₄ was found to be a facile, efficient, convenient, and chemoselective system for the deoxygenation of dialkyl, diaryl, and aryl alkyl sulfoxides, especially for the reduction of dibenzyl sulfoxide to the corresponding sulfides under mild conditions. In addition, the HfCl₄/KBH₄ system could be used in reduction of some other sulfur-bearing substrates to the corresponding sulfides, such as 2,2′-dibenzothiazolyl disulfide, but this reducing system could not reduce sulfolane, diphenyl sulfone, p-toluenesulfonic acid, and p-toluenesulfonyl chloride to their corresponding thiophenols.     

Organofluorine sulfur-containing compounds

Polyfluorinated aryldifluoromethyl sulfides have been obtained by treatment of polyfluorinated 4-X-substituted thiophenols with chlorodifluoromethane in an alkaline medium. Reactions of difluoromethylpentafluorophenyl sulfide with H₂O₂, KMnO₄, and HNO₃, giving the corresponding sulfoxide and sulfone, were studied.     

Water-soluble polymer anchored peroxotitanates as environmentally clean and recyclable catalysts for mild and selective oxidation of sulfides with H2O2 in water

Anchoring of peroxotitanium (pTi) species to linear water-soluble acrylic acid based polymers, poly(sodium acrylate) (PA) and poly(sodium methacrylate) (PMA) led to the successful synthesis of a pair of new, water-tolerant and recyclable catalysts of the type [Ti₂(O₂)₂O₂(OH)₂]^4-—L (L = PA or PMA), highly effective in chemoselective sulfoxidation of organic sulfides with 30% H₂O₂ in aqueous medium at ambient temperature. The catalytic protocol is high yielding (TOF up to 11,280 h^?1), operationally simple as well as environmentally clean and safe, being free from halide, or any other toxic auxiliaries. The catalysts are sufficiently stable to afford easy recyclability for at least 10 consecutive reaction cycles of sulfoxidation with consistent activity selectivity profile. Oxidation of dibenzothiophene (DBT) to respective high purity sulfoxide or sulfone could also be accomplished using the same catalysts by variation of reaction conditions.     

[Mn(salophen)Cl] supported on modified polystyrene as a selective heterogeneous catalyst for oxidation of sulfides under ultrasonic irradiation

The use of ultrasonic irradiation for the selective synthesis of sulfone in the oxidation of sulfides with NaIO₄ catalyzed by Mn(Salophen) supported on chloromethylated polystyrene-bound imidazole, [Mn(Salophene)-PSI], is reported. This heterogeneous catalyst efficiently catalyzed selective oxidation of sulfides to sulfones under ultrasonic irradiation and no sulfoxide was detected in the reaction mixture.     

Facile oxygenation of organic sulfides with H2O2 catalyzed by Mn-Me3TACN compounds

Two binuclear Mn-Me₃TACN (Me₃TACN is 1,4,7-N,N′,N″-trimethyl-1,4,7-triazacyclononane) compounds catalyze the oxygenation of organic sulfides utilizing H₂O₂ under ambient conditions. Both phenyl sulfide and ethyl phenyl sulfide were converted to the corresponding sulfones and chloroethyl phenyl sulfide proceeds to its elimination product of phenyl vinyl sulfone.     

Notizen zur Synthese von 2-Aminophenylsulfonen

Syntheses of some Alkyl, Cycloalkyl and Aryl 2-Aminophenyl Sulfones Syntheses of the alkyl, cycloalkyl and aryl 2-aminophenyl sulfones 10 were achieved by oxidation of the corresponding 2-nitrophenyl sulfides 7 to the 2-nitrophenyl sulfones 9 followed by ethanolic Béchamp-reduction. The sulfides 7 in turn were obtained either by reactions of 2-nitro-thiophenol ( 8 ) with the appropriate alkyl and cycloalkyl halides or of 2-chloro-nitrobenzene ( 5 ) with the relevant thiols. Condensation of 2-nitrobenzenesulfinic acid ( 3 ) with bromoacetic acid in aqueous alkaline solution led - presumably via 2-nitrophenylsulfonylacetic acid ( 4 ) - to methyl 2 nitrophenyl sulfone ( 1 ), reduction of which gave 2-aminophenyl methyl sulfone ( 2 ). Treatment of 2-aminothiophenol ( 11 ) with t-butyl alcohol in aqueous sulfuric acid gave 2-aminophenyl t-butyl sulfide ( 12 ), which was acetylated to o-t-butylthio-acetanilide ( 13 ). Oxidation of the latter to o-t-butylsulfonyl-acetanilide ( 14 ) followed by hydrolysis led to 2-aminophenyl t-butyl sulfone ( 15 ).     

Synthesis and Antitumor Activity of Novel 2-(Thymin-1 ′ -ylmethoxy)ethyl Alkyl Sulfides and Their Oxidation Products

A series of novel 2-(thymin-1′-ylmethoxy)ethyl alkyl sulfides have been synthesized in three steps from thymine. They have been oxidized into sulfoxide and sulfone derivatives by means of NaIO ₄ and H ₂ O ₂ 30%/diethyl azodicarboxylate (DEAD), respectively, in high yields. All products were characterized by ¹ H NMR and IR spectra and elemental analyses. The preliminary bioassay indicates that the compound 6g exhibited potential antitumor activity.     

Carbon-13 chemical shifts of 3-substituted thietanes,thietane 1-oxides and thietane 1,1-dioxides

Carbon-13 chemical shifts of the α- and β-carbon atoms for 12 thietane 1,1-dixides, 9 thietane 1-oxides and 7 thietanes with a variety of 3-substituents [H, CH(CO₂Et)₂, SEt, Br, SPh, Ph, Cl, NMe₂, OH, OSiMe₃, OAc, OEt] are correlated according to the nature of the sulfur atom (Y=sulfone, sulfoxide, sulfide) and the nature of the 3-substituent (X) by the equations δ_α= a_Y+b_X and δ_β=a_X+b_Y, where a and b are parameters characteristic of X and Y. One-bond coupling constants [J(CH)] are reported for 21 compounds. The chemical shifts for the α- and the β-carbon atoms of the sulfones show the ‘fore-membered ring sulfone effect’ (α-carbon unusually deshielded, β-carbon unusually shielded), but the α-carbon-hydrogen coupling constants are similar to those of the sulfoxides and sulfides; the β-carbon-hydrogen coupling constants are sensitive to the nature of the substituent (X) but no special β-effect is observed. Comparison of the chemical shifts of the α-methylene carbon atoms of 3-phenyl-, 3-(β-naphthyl)- and 3-(α-thienyl)-thietes with those of the coresponding sulfones also reveals the ‘four-membered ring sulfone effect’ cis- and trans-3-Substituted thietane 1-oxides may be distinguished by the greater downfield shift for the β-carbon atom in the trans-isomer.     

A recyclable fluorous thiourea organocatalyst for the chemoselective oxidation of sulfides

As a kind of organocatalyst, 1-[4-(perfluorooctyl)phenyl]-3-phenylthiourea was employed to the chemoselective oxidation of sulfides in the presence of 30% H₂O₂. A variety of diaryl, dialkyl, alkyl aryl sulfides could be oxidized to sulfoxide under the mild condition. The catalyst could be easily recovered by fluorous solid-phase extraction for reuse.     

Highly efficient utilization of H2O2 for oxygenation of organic sulfides catalyzed by [γ-SiW10O34(H2O)2]

Remarkable efficiency of hydrogen peroxide utilization is reported for oxygenation of four organic sulfides catalyzed by a divacant lacunary silicotungstate, (Bu₄N)₄[γ-SiW₁₀O₃₄(H₂O)₂] (1), under mild conditions. The addition of imidazole, phosphate, or carboxylates significantly enhances the rate of organic sulfide oxygenation. Most notably, use of 1 and imidazole, both at 1% molar concentration, resulted in the quantitative conversion of phenylsulfide to sulfoxide with 1 equiv of H₂O₂ in 3 h, and to sulfone with 2 equiv of H₂O₂ in 6 h.     

Influence of oxidation state of sulfur on the dissociation of [Tz-(CH2)n-S(O)m-(CH2)n-Tz + Na+] adducts generated by electrospray ionization (Tz = tetrazole ring; n = 2, 3; m= 0, 1, 2)

Sodium adducts of six organosulfur‐α,ω‐ditetrazole compounds (Tz‐(CH₂)_n‐S(O)_m‐(CH₂)_n‐Tz; where Tz = tetrazole ring; n = 2, 3; m = 0, 1, 2) were generated via electrospray ionization (ESI) and their fragmentation pattern assessed via collision‐induced dissociation (CID). Two main dissociation channels were observed: (a) losses of N₂ and HN₃ from the tetrazole rings; (b) cleavage of the C–S bond. The sulfoxides pass predominantly through the second fragmentation pathway, but for the sulfides and sulfones the tetrazole ring fragmentation occurs. Theoretical calculations at the B3LYP/6‐31 + G(d,p) level indicate that for all the adducts (sulfide, sulfoxide, and sulfone) the dissociation pathway that leads to product ions arising from loss of N₂ was the most exothermic. Based on these results and assumptions, it was postulated that the dissociation of the sulfoxide adducts occurs under kinetic control (N₂‐loss pathway via a much more energetic transition state). For the sulfide and sulfone adducts, on the other hand, the dissociation process takes place via a thermodynamically controlled process. Copyright © 2011 John Wiley & Sons, Ltd.     

HbA/H2O2: an efficient biomimetic catalytic system for the oxidation of sulfides to sulfoxides

Human hemoglobin (HbA) catalyzed chemo-selective oxidation of sulfides to sulfoxides has been reported using hydrogen peroxide as an oxidant in a phosphate buffer. This biomimetic catalytic procedure was found to be simple, environmentally friendly, selective, and high yielding. Purified human oxyhemoglobin (HbA₀), crude human oxyhemoglobin, and ferryl oxyhemoglobin were used for sulfoxidation. HbA₀ and ferryl oxyhemoglobin (Fe⁺⁴O) efficiently catalyze the sulfoxidation reaction without over oxidation to the sulfone.     

The formation of mixed copper sulfide—silver sulfide membranes for copper( II)-selective electrodes: Part II. Relation between structure and electrochemical behaviour of the electroactive material

Mixed copper sulfide—silver sulfide precipitates used for copper-selective electrodes have been studied by x-ray powder diffractometry, scanning electron microscopy and solubility measurements, in order to find an explanation for the high limit of detection, measured in calibration experiments as well as in titrations. X-ray diffraction showed that some precipitates consisted of ternary sulfides (mainly jalpaite, Ag_1.5 ,Cu_0.5 S), while others were mixtures of the binary sulfides. The presence of ternary sulfides could be correlated with optimal electrochemical and mechanical characteristics. The solubility measurements showed extraordinarily high solubilities for these sulfides. Evidence is given that these high solubilities are caused by the oxidation of copper(I) present in the ternary compound, the reaction being Cu₂S ? CuS + Cu²⁺ + 2e^-. S.e.m. photographs gave some additional information about the structure and the particle size of several precipitates.     

Structure and conformational processes of bis(o-cumyl)sulfide, sulfoxide and sulfone

The NMR solution spectra of the title sulfide and sulfone show decoalescence of the geminal methyl signals of the isopropyl groups at low temperature (−178 °C for the ¹³C signal of sulfide at 150.8 MHz and −147 °C for the ¹H signal of sulfone at 600 MHz). The barriers for the related dynamic processes were measured (4.3 and 7.0 kcal mol⁻¹ for the sulfide and sulfone, respectively). The preferred conformer of sulfide has a propeller shape with a C₁ symmetry, as suggested by Molecular Mechanics (MM) calculations. In the case of sulfone the preferred conformer has a propeller shape with a C₂-anti symmetry, as indicated by calculations and supported by X-ray crystallographic determination. The computed contour map of the potential energy shows that in both cases the dynamic processes take place via correlated rotations (cogwheel mechanism) of the two aromatic substituents about the Ar-S bonds. Dynamic processes could not be observed by NMR in the title sulfoxide, which was also found to adopt a propeller shaped conformation, as indicated by MM calculations and X-ray diffraction.     

Synthesis and Antimicrobial Evaluation of Novel N-Substituted β-Hydroxy Benzimidazole Sulfone Fluoroquinolones by Selective Oxidation Using Ticl4-H2O2

Abstract

The synthesis of N-substituted β-hydroxy benzimidazole sulfones containing 8-methoxy fluoroquinolone has been described and they were evaluated for antimicrobial activities. The compounds of N-substituted β-hydroxy benzimidazole sulfides (4a–e) and N-substituted β-hydroxy benzimidazole sulfones (5a–e) at C-7 of fluoroquinoline exhibited superior activity in vitro. 8-Methoxy fluoroquinolone carboxylic acid (1), reaction with piperizine in acetonitrile in presence of triethylamine under reflux gives 7-piperazinyl-8-methoxyfluoroquinolone (2). The latter is reacted with epichlorohydrine in presence of NaOH in acetone yielded N-substituted epoxide (3), which on treatment with 5-substituted-2-mercaptobenzimidazoles gives N-substituted β-hydroxy benzimidazole sulfides (4). Further, 4 on treatment with TiCl₄-H₂O₂ and in DCM yielded the corresponding N-substituted β-hydroxy benzimidazole sulfone (5).     

Oxidation of Alkenes and Sulfides with Transition Metal Catalysts

Alkenes and sulfides were oxidized with transition-metal catalysts. The oxidant sources include molecular dioxygen, air and iodosylbenzene. The metal ions Mn(III), Fe(III), Co(II) and Ni(II) were used. The Catalysts 1-18 of 1,3-dioxo-, β-ketoimine- or salen-types were prepared and their efficacy was examined. 1,2-Dihydronaphthalene is most efficiently epoxidized with O₂/Me₂CHCHO or PhIO in the presence of Mn(III)-salen catalysts. The Ni(II)-, Co(II)- and Fe(III)-catalysts of either β-ketoimine- or salen-types are useful for epoxidation of styrene, (E)-stilbene and (E)-benzalacetone in the O₂/Me₂HCHO system; these epoxidations are stereospecific without formation of corresponding diastereomeric epoxides. Oxidation of methyl p-tolyl sulfide with O₂/Me₂CHCHO is facilitated by the 1,3-dioxo-catalyst Co(II)-1. Monooxidation is achieved with Me₂CHCHO in equimolar proportions to give the corresponding sulfoxide, whereas overoxidation is realized with excess Me₂CHCHO to give the sulfone. These epoxidation and sulfide oxidations all occur at 25 °C and are complete in less than a day.     

Anchoring of Cu(II)–vanillin Schiff base complex on MCM‐41: A highly efficient and recyclable catalyst for synthesis of sulfides and 5‐substituted 1H–tetrazoles and oxidation of sulfides to sulfoxides

A copper(II)–vanillin complex was immobilized onto MCM‐41 nanostructure and was used as an inexpensive, non‐toxic and heterogeneous catalyst in the synthesis of symmetric aryl sulfides by the cross‐coupling of aromatic halides with S₈ as an effective sulfur source, in the oxidation of sulfides to sulfoxides using 30% H₂O₂ as a green oxidant and in the synthesis of 5‐substituted 1H –tetrazoles from a smooth (3 + 2) cycloaddition of organic nitriles with sodium azide (NaN₃). The products were obtained in good to excellent yields. This catalyst could be reused several times without loss of activity. Characterization of the catalyst was performed using Fourier transform infrared, energy‐dispersive X‐ray and atomic absorption spectroscopies, X‐ray diffraction, thermogravimetric analysis, and scanning and transmission electron microscopies.     

Allylic Sulfones Containing Triene Moieties as Key Synthons for Carotenoid Synthesis

An efficient synthetic method for the allylic sulfone 2 containing a conjugated triene moiety has been proposed involving i) coupling of allylic sulfones 4 with the C₅ bromoallylic sulfide 5 , ii) base‐promoted dehydrosulfonation in the presence of allylic sulfide, and iii) selective oxidation of the resulting trienyl sulfide to the corresponding sulfone. Total synthesis of lycopene starting from the C₁₅ allylic sulfone 2b has been described, where the new C₁₀ bis(chloroallylic) sulfone 11 proved to be a useful substitute for the C₁₀ bis(chloroallylic) sulfide 3 , which did not require the problematic chemoselective sulfur oxidation in a conjugated polyene.     

Sulfone–Metal Exchange and Alkylation of Sulfonylnitriles

The first general sulfone–metal exchange is described. Treating substituted 2-pyridylsulfonylacetonitriles with either BuLi or Bu₃MgLi generates metalated nitriles that efficiently intercept a variety of electrophiles to afford quaternary nitriles. The 2-pyridylsulfone is critical for the sulfone–metal exchange because chelation anchors the organometallic proximal to the electrophilic, tetrasubstituted sulfone to override complex-induced deprotonation. Alkylating commercial 2-pyridinesulfonylacetonitrile with mild bases, either K₂CO₃ or DBU, and subsequent sulfone–metal exchange and alkylation rapidly assembles quaternary nitriles by three alkylations, only one of which requires an organometallic reagent.     

Conformational properties of methyl vinyl sulfone: Ab initio geometry optimization and vibrational analysis

An ab initio conformational analysis of methyl vinyl sulfone (CH₂CHSO₂CH₃) has been carried out. Molecular geometry optimizations have been performed at the HF and MP2 levels of the theory. Relative energies of the stationary points have been determined by using different approaches, including electron correlation corrections up to the third order. The IR and Raman spectra of the liquid have been measured and a vibrational assignment is proposed. The height of the barrier to the methyl group internal rotation has been estimated. Theoretical calculations and vibrational spectra have shown that the predominant conformation of methyl vinyl sulfone has the C=C bond eclipsed with one of the S=O bonds. Similar eclipsed forms have been found in vinyl fluoro sulfone, vinyl chloro sulfone and divinyl sulfone by ab initio HF calculations.