13C-NMR spectral studies on the distribution of substituents in water-soluble cellulose acetate

The degree of substitution (DS) and distribution of O-acetyl groups of water-soluble cellulose acetate (CA) were investigated by ¹³C-NMR. For this purpose, three different series of CA samples with low DS were prepared by respective homogeneous reaction, i.e., (1) deacetylation of cellulose triacetate (CTA) in acetic acid—water solution (D-series), (2) reaction of CTA with hydrazine (H-series), and (3) acetylation of cellulose with acetic anhydride in a 10% LiCl-dimethylacetamide solution (A-series). It was found that (i) water-soluble CA can be obtained only from D-series products, (ii) the DS value of water-soluble CA ranges from 0.5 to 1.1, (iii) the D-series products exhibit little difference between the relative DS values at C-2, C-3 and C-6 hydroxyl groups, and (iv) the relative DS at C-6 hydroxyl groups is very high compared to those at C-2 and C-3 hydroxyl groups in H- and A-series products. Aqueous solution of water-soluble CA (D-series sample) showed no gel—sol transition, even when the temperature was raised to 95°C. X-ray diffraction observations revealed that the water-soluble D-series samples were essentially noncrystalline, but the water-insoluble A-series samples were crystalline. It was also found that the relative ease of acetylation is C-6 > C-2 > C-3.     

Synthesis of haloconduritols from an endo-cycloadduct of furan and vinylene carbonate

A method for preparing haloconduritols having a conduritol-A construction is described. A mixture of endo- and exo-cycloadduct derivatives prepared from the Diels-Alder reaction of furan and vinylene carbonate was converted into diacetate derivatives by hydrolysis (K₂CO₃/MeOH) followed by acetylation (Ac₂O/pyridine). Boron trihalide (BBr₃ or BCl₃)-assisted ring-opening of the endo-diacetate in CH₂Cl₂ at −78°C gave (1α,2α,3β,6β)-6-halogeno-4-cyclohexene-1,2,3-triol 1,2-diacetate from which the corresponding triacetate was prepared by acetylation (AcCl). trans-Esterification of the triacetate (MeOH/HCl) afforded (1α,2α,3β,6β)-6-halogeno-4-cyclohexene-1,2,3-triol (X=Br or Cl). BF₃-Assisted ring-opening of the endo-diacetate in CH₂Cl₂ gave (1α,2α,3β,6β)-6-chloro-4-cyclohexene-1,2,3-triol 1,2-diacetate by means of halogen exchange.     

New Molybdenyl Iodates: Hydrothermal Preparation and Structures of Molecular K2MoO2(IO3)4 and Two-Dimensional β-KMoO3(IO3)

Two new molybdenyl iodates, K₂MoO₂(IO₃)₄ (1) and β-KMoO₃(IO₃) (2), have been prepared from the reactions of MoO₃ with KIO₄ and NH₄Cl at 180°C in aqueous media. The structure of 1 consists of molecular [MoO₂(IO₃)₄]²⁻ anions separated by K⁺ cations. The Mo(VI) centers are ligated by two cis-oxo ligands and four monodentate iodate anions. Both terminal and bridging oxygen atoms of the iodate anions form long ionic contacts with the K⁺ cations. β-KMoO₃(IO₃) (2) displays a two-dimensional layered structure constructed from ²_∞[(MoO₃(IO₃)]¹⁻ anionic sheets separated by K⁺ cations. These sheets are built from one-dimensional chains formed from corner-sharing MoO₆ octahedra that run along the b-axis that are linked together through bridging iodate groups. K⁺ cations separate the layers from one another and form long contacts with oxygen atoms from both the iodate anions and molybdenyl moieties. Crystallographic data: 1, monoclinic, space group C2/c, a=12.8973(9) Å, b=6.0587(4) Å, c=17.694(1) Å, β=102.451(1)°, Z=4, MoKα, λ=0.71073, R(F)=2.64% for 97 parameters with 1584 reflections with I>2σ(I); 2, monoclinic, space group P2₁/n, a=7.4999(6) Å, b=7.4737(6) Å, c=10.5269(8) Å, β=109.023(1)°, Z=4, MoKα, λ=0.71073, R(F)=2.73% for 83 parameters with 1334 reflections with I>2σ(I).     

Effect of Molecular Structure on the GasPermeability of Cellulose Aliphatate Esters简

In this work, four kinds of cellulose aliphatate esters, cellulose acetate （CA）, cellulose propionate （CP）, cellulose butyrate （CB） and cellulose acetate butyrate （CAB） are synthesized by the homogeneous acylation reactions in cellulose/AmimC1 solutions. These cellulose aliphatate esters are used to prepare gas separation membranes and the effects of molecular structure, such as substituent type, degree of substitution （DS） and distribution of substituents, on the gas permeability are studied. For CAs, as the DS increases, their gas permeabilities for all five gases （02, N2, CH4, CO and CO2） increase, and the ideal permselectivity significantly increases first and then slightly decreases. At similar DS value, the homogenously synthesized CA （distribution order of acetate substituent： C6 〉 C3 〉 C2） is superior to the heterogeneously synthesized CA （distribution order of acetate substituent： C3 〉 C2 〉 C6） in gas separation. With the increase of chain length of aliphatate substituents from acetate to propionate, and to butyrate, the gas permeability of cellulose aliphatate esters gradually increases. The cellulose mixed ester CAB with short acetate groups and relatively long butyrate groups exhibits higher gas permeability or better permselectivity than individual CA or CB via the alteration of the DS of two substituents.     

Crystal growth, structure determination, and optical properties of new potassium-rare-earth silicates K3RESi2O7 (RE=Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu)

Single crystals of K₃RESi₂O₇ (RE=Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) were grown from a potassium fluoride flux. Two different structure types were found for this series. Silicates containing the larger rare earths, RE=Gd, Tb, Dy, Ho, Er, Tm, Yb crystallize in a structure K₃RESi₂O₇ that contains the rare-earth cation in both a slightly distorted octahedral and an ideal trigonal prismatic coordination environment, while in K₃LuSi₂O₇, containing the smallest of the rare earths, lutetium is found solely in an octahedral coordination environment. The structure of K₃LuSi₂O₇ crystallizes in space group P6₃/mmc with a=5.71160(10) Å and c=13.8883(6) Å. The structures containing the remaining rare earths crystallize in the space group P6₃/mcm with the lattice parameters of a=9.9359(2) Å, c=14.4295(4) Å, (K₃GdSi₂O₇); a=9.88730(10) Å, c=14.3856(3) Å, (K₃TbSi₂O₇); a=9.8673(2) Å, c=14.3572(4) Å, (K₃DySi₂O₇); a=9.8408(3) Å, c=14.3206(6) Å, (K₃HoSi₂O₇); a=9.82120(10) Å, c=14.2986(2) Å, (K₃ErSi₂O₇); a=9.80200(10) Å, c=14.2863(4) Å, (K₃TmSi₂O₇); a=9.78190(10) Å, c=14.2401(3) Å, (K₃YbSi₂O₇). The optical properties of the silicates were investigated and K₃TbSi₂O₇ was found to fluoresce in the visible.     

Syntheses, structures, and vibrational spectroscopy of the two-dimensional iodates Ln(IO3)3 and Ln(IO3)3(H2O) (LnYb, Lu)

The reaction of Lu³⁺ or Yb³⁺ and H₅IO₆ in aqueous media at 180 °C leads to the formation of Yb(IO₃)₃(H₂O) or Lu(IO₃)₃(H₂O), respectively, while the reaction of Yb metal with H₅IO₆ under similar reaction conditions gives rise to the anhydrous iodate, Yb(IO₃)₃. Under supercritical conditions Lu³⁺ reacts with HIO₃ and KIO₄ to yield the isostructural Lu(IO₃)₃. The structures have been determined by single-crystal X-ray diffraction. Crystallographic data are (MoKα, λ=0.71073 Å): Yb(IO₃)₃, monoclinic, space group P2₁/n, a=8.6664(9) Å, b=5.9904(6) Å, c=14.8826(15) Å, β=96.931(2)°, V=766.99(13), Z=4, R(F)=4.23% for 114 parameters with 1880 reflections with I>2σ(I); Lu(IO₃)₃, monoclinic, space group P2₁/n, a=8.6410(9), b=5.9961(6), c=14.8782(16) Å, β=97.028(2)°, V=765.08(14), Z=4, R(F)=2.65% for 119 parameters with 1756 reflections with I>2σ(I); Yb(IO₃)₃(H₂O), monoclinic, space group C2/c, a=27.2476(15), b=5.6296(3), c=12.0157(7) Å, β=98.636(1)°, V=1822.2(2), Z=8, R(F)=1.51% for 128 parameters with 2250 reflections with I>2σ(I); Lu(IO₃)₃(H₂O), monoclinic, space group C2/c, a=27.258(4), b=5.6251(7), c=12.0006(16) Å, β=98.704(2)°, V=1818.8(4), Z=8, R(F)=1.98% for 128 parameters with 2242 reflections with I>2σ(I). The f elements in all of the compounds are found in seven-coordinate environments and bridged with monodentate, bidentate, or tridentate iodate anions. Both Lu(IO₃)₃(H₂O) and Yb(IO₃)₃(H₂O) display distinctively different vibrational profiles from their respective anhydrous analogs. Hence, the Raman profile can be used as a complementary diagnostic tool to discern the different structural motifs of the compounds.     

The unusual reaction of 2-isocyanatophenyl acetate with amines and water

The reaction of 2-isocyanatophenyl acetate with adamantyl and phenyl-containing amines gave the corresponding acetamides. Intermediate 2-isocyanatophenol formed in the course of the reaction undergoes intramolecular cyclization to 2-benzoxazolinone. These reactions proceed only with amines possessing basicity (pK_b > 3.80).     

Pd(OAc)2-catalyzed cross-coupling of polyfluoroarenes with simple aromatics in imidazolium ionic liquids (ILs) without oxidant and additive and with recycling/reuse of the IL

Polyfluoroarenes can be cross-coupled with simple aromatics (benzene, toluene, and anisole), in good isolated yields, by using Pd(OAc)₂ dissolved in imidazolium ILs [(bmim)PF₆ and (bmim)BF₄] as solvent, without the need for an oxidant and an additive. The reaction is catalyzed by HOAc and it is subject to a primary isotope effect (K_H/K_D = 4.87). Competitive cross-coupling reactions of 1,2,4,5-tetrafluorobenzene with benzene/toluene, benzene/anisole, and anisole/toluene gave K_B/K_T = 5.1, K_B/K_A = 5.7, and K_A/K_T = 5.0, respectively, indicative of a remote substituent effect on Pd insertion into the phenyl C-H bond. Mild reaction conditions, simple product isolation and recycling/reuse of the IL are additional advantages of this method.     

Tripotassium trichromium (III) tetraarsenate K3Cr3(ASO4)4: synthesis, structural study, IR spectroscopy characterization and ionic behavior

The potassium chromium (III) arsenate K₃Cr₃(AsO₄)₄ is prepared by solid state reaction at 900°C from a mixture of K₂CO₃, As₂O₃ and (NH₄)₂Cr₂O₇. It is structurally characterized by single-crystal X-ray diffraction. It crystallizes in the Cmca (no. 64) space group with a=10.671(1) Å, b=20.911(5) Å, c=6.500(3) Å, V=1450.4(8) Å³, Z=4, R(F²)=0.0424 and Rω(F²)=0.1199 for 846 reflections with F²>2σ(F²). The structure consists of CrO₆ octahedra and AsO₄ tetrahedra sharing corners and edges to form a two-dimensional framework. The K⁺(2) cations are located in the interlayer space. Conductivity measurement () shows that K₃Cr₃(AsO₄)₄ is a poor ionic conductor.     

Mesomorphic solutions of cellulose triacetate in trifluoroacetic acid halogenated solvent mixtures: Phase separations and factors affecting the cholesteric pitch

Cellulose triacetate (CTA) forms cholesteric mesophases in trifluoroacetic acetic acid (TFA) and mixtures of TFA and CH₂Cl₂, 1,2-dichloroethane (1,2-DCE), and CHCl₃. Cholesteric pitches and solution flow times indicate that the order of solvent powers is TFA-CH₂Cl₂ > TFA-1,2-DCE > TFA > TFA-CHCl₃, which is the order of decreasing acidity of the solvent systems. With TFA-CH₂Cl₂ as solvent, the one-fourth power of the pitch varies inversely with the CTA concentration, and increases linearly with temperature. The pitch increases exponentially with time and increases faster the more acidic the solvent. In a magnetic field a cholesteric to nematic transition occurs. A minimum in solution viscosity occurs at 34% w/v of CH₂Cl₂ for solutions in TFA-CH₂Cl₂. The miscibility gap as a function of molecular weight depends on the solvent composition and is smaller the higher the acidity of the solvent. Agreement between the experimentally observed A and B points and the theoretical points is better for the Khokhlov and Semenov theory for semiflexible chains than for the original Flory theory or the Flory-Ronca modification.     

Synthesis and crystal structure of the palladium oxides NaPd3O4, Na2PdO3 and K3Pd2O4

NaPd₃O₄, Na₂PdO₃ and K₃Pd₂O₄ have been prepared by solid-state reaction of Na₂O₂ or KO₂ and PdO in sealed silica tubes. Crystal structures of the synthesized phases were refined by the Rietveld method from X-ray powder diffraction data. NaPd₃O₄ (space group Pm3¯n, a=5.64979(6) Å, Z=2) is isostructural to NaPt₃O₄. It consists of NaO₈ cubes and PdO₄ squares, corner linked into a three-dimensional framework where the planes of neighboring PdO₄ squares are perpendicular to each other. Na₂PdO₃ (space group C2/c, a=5.3857(1) Å, b=9.3297(1) Å, c=10.8136(2) Å, β=99.437(2)°, Z=8) belongs to the Li₂RuO₃-structure type, being the layered variant of the NaCl structure, where the layers of octahedral interstices filled with Na⁺ and Pd⁴⁺ cations alternate with Na₃ layers along the c-axis. Na₂PdO₃ exhibits a stacking disorder, detected by electron diffraction and Rietveld refinement. K₃Pd₂O₄, prepared for the first time, crystallizes in the orthorhombic space group Cmcm (a=6.1751(6) Å, b=9.1772(12) Å, c=11.3402(12) Å, Z=4). Its structure is composed of planar PdO₄ units connected via common edges to form parallel staggered PdO₂ strips, where potassium atoms are located between them. Magnetic susceptibility measurements of K₃Pd₂O₄ reveal a Curie-Weiss behavior in the temperature range above 80 K.     

Synthesis, structure characterization and optical properties of a new tripotassium cadmium pentaborate, K3CdB5O10

A new ternary borate oxide, K₃CdB₅O₁₀, has been synthesized by solid-state reaction at 580 °C. The compound crystallizes in the monoclinic space group P2₁/n with a=7.6707 (7) Å, b=19.1765 (17) Å, c=7.8784 (6) Å, β=115.6083 (49)°, and Z=4. The crystal structure consists of a two-dimensional infinite [CdB₅O₁₀] layer, which forms by connecting isolated double ring [B₅O₁₀] groups and CdO₄ tetrahedra. K atoms filling in the interlayer and intralayer link the layers together and balance charge. The IR spectrum has been studied and confirmed the presence of both BO₃ and BO₄ groups, and the UV-vis-IR diffuse reflectance spectrum exhibits a band gap of about 3.4 eV. The DSC analysis proves that K₃CdB₅O₁₀ is a congruent melting compound.     

Magnetism and Raman spectroscopy of the dimeric lanthanide iodates Ln(IO3)3 (Ln=Gd, Er) and magnetism of Yb(IO3)3

Colorless single crystals of Gd(IO₃)₃ or pale pink single crystals of Er(IO₃)₃ have been formed from the reaction of Gd metal with H₅IO₆ or Er metal with H₅IO₆ under hydrothermal reaction conditions at 180 °C. The structures of both materials adopt the Bi(IO₃)₃ structure type. Crystallographic data are (MoKα, λ=0.71073 Å): Gd(IO₃)₃, monoclinic, space group P2₁/n, a=8.7615(3) Å, b=5.9081(2) Å, c=15.1232(6) Å, β=96.980(1)°, V=777.03(5) Z=4, R(F)=1.68% for 119 parameters with 1930 reflections with I>2σ(I); Er(IO₃)₃, monoclinic, space group P2₁/n, a=8.6885(7) Å, b=5.9538(5) Å, c=14.9664(12) Å, β=97.054(1)°, V=768.4(1) Z=4, R(F)=2.26% for 119 parameters with 1894 reflections with I>2σ(I). In addition to structural studies, Gd(IO₃)₃, Er(IO₃)₃, and the isostructural Yb(IO₃)₃ were also characterized by Raman spectroscopy and magnetic property measurements. The results of the Raman studies indicated that the vibrational profiles are adequately sensitive to distinguish between the structures of the iodates reported here and other lanthanide iodate systems. The magnetic measurements indicate that only in Gd(IO₃)₃ did the 3+ lanthanide ion exhibit its full 7.9 μ_B Hund's rule moment; Er³⁺ and Yb³⁺ exhibited ground state moments and gap energy scales of 8.3 μ_B/70 K and 3.8 μ_B/160 K, respectively. Er(IO₃)₃ exhibited extremely weak ferromagnetic correlations (+0.4 K), while the magnetic ions in Gd(IO₃)₃ and Yb(IO₃)₃ were fully non-interacting within the resolution of our measurements (∼0.2 K).     

Aluminum phosphate dispersed on a cellulose acetate fiber surface: Preparation, characterization and application for Li, Na and K separation

Cellulose acetate fibers with supported highly dispersed aluminum phosphate were prepared by reacting aluminum-containing cellulose acetate (Al₂O₃=3.5 wt.%; 1.1 mmol g⁻¹ aluminum atom per gram of the material) with phosphoric acid. Solid-state NMR spectra (CPMAS ³¹P NMR) data indicated that HPO₄²⁻ is the species present on the fiber surface. The specific concentration of acidic centers, determined by ammonia gas adsorption, is 0.50 mmol g⁻¹. The ion exchange capacities for Li⁺, Na⁺ and K⁺ ions were determined from ion exchange isotherms at 298 K and showed the following values (in mmol g⁻¹): Li⁺=0.03, Na⁺=0.44 and K⁺=0.50. The H⁺/Li⁺ exchange corresponds to the model of the ideal ion exchange with a small value of the corresponding equilibrium constant K=1.1×10⁻². Due to the strong cooperative effect, the H⁺/Na⁺ and H⁺/K⁺ ion exchange is non-ideal. These ion exchange equilibria were treated with the use of models of fixed bi- or tridentate centers, which consider the surface of the sorbent as an assemblage of polyfunctional sorption centers. Both the observed ion exchange capacities with respect to the alkaline metal ions and the equilibrium constants were discussed by taking into consideration the sequence of the ionic hydration radii for Li⁺, Na⁺ and K⁺. The matrix affinity order for the ions decreases as the hydration radii of the cations increase, i.e. Li⁺>Na⁺>K⁺. The high values of the separation factors S_Na⁺/Li⁺ and S_K⁺/Li⁺ (up to several hundred) provide quantitative separation of Na⁺ and K⁺ from Li⁺ from a mixture containing these three ions.     

Quantitative determination of the acetyl groups in nucleotide acetates

Conclusions 1. A spectrophotometric method for the quantitative determination of the acetyl groups in acetates of mononucleotides by means of the acid hydroxamic complex with Fe₂(SO₄)₃ has been developed. It has been shown that the determination of the concentration of nucleotide material in the solution being analyzed can be carried out directly in the reaction mixture in the first stage of the reaction of the acetate with hydroxylamine (before the formation of the Fe⁺⁺⁺ complex).2. In the case of uridine, cytidine, and adenosine derivatives, the reaction with hydroxylamine takes place quantitatively in 10 min at 20°C, while for the determination of the acetyl groups in the triacetate of guanosine 2'(3')-phosphate the reaction was carried out at 40°C for 3 h.Institute of High-Molecular Compounds, Academy of Sciences of the USSR. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 607–612, September–October, 1970.     

New one-dimensional uranyl and neptunyl iodates: crystal structures of K3[(UO2)2(IO3)6](IO3)·H2O and K[NpO2(IO3)3]·1.5H2O

The uranyl and neptunyl(VI) iodates, K₃[(UO₂)₂(IO₃)₆](IO₃)·H₂O (1) and K[NpO₂(IO₃)₃]·1.5H₂O (2), have been prepared and crystallized under mild hydrothermal conditions. The structures of 1 and 2 both contain one-dimensional _∞¹[AnO₂(IO₃)₃]¹⁻(An=U,Np) ribbons that consist of approximately linear actinyl(VI) cations bound by iodate anions to yield AnO₇ pentagonal bipyramids. The AnO₇ units are linked by bridging iodate anions to yield chains that are in turn coupled by additional iodate anions to yield ribbons. The edges of the ribbons are terminated by monodentate iodate anions. For 1 and 2, K⁺ cations and water molecules separate the ribbons from one another. In addition, isolated iodate anions are also found between _∞¹[UO₂(IO₃)₃]¹⁻ ribbons in 1. In order to aid in the assignment of oxidation states in neptunyl containing compounds, a bond-valence sum parameter of 2.018 Å for Np(VI) bound exclusively to oxygen has been developed with b=0.37 Å. Crystallographic data (193 K, MoKα, λ=0.71073): 1, triclinic, , a=7.0609(4) Å, b=14.5686(8)  Å, c=14.7047(8)  Å, α=119.547(1)°, β=95.256(1)°, γ=93.206(1)°, Z=2, R(F)=2.49% for 353 parameters with 6414 reflections with I>2σ(I); (203 K, MoKα, λ=0.71073): 2, monoclinic, P2₁/c, a=7.796(4)  Å, b=7.151(3)  Å, c=21.79(1)  Å, β=97.399(7)°, Z=4, R(F)=6.33% for 183 parameters with 2451 reflections with I>2σ(I).     

Optimization of partitioning process parameters of chloramphenicol in ionic liquid aqueous two-phase flotation using response surface methodology

Ionic liquid aqueous two-phase flotation (ILATPF) is a green and effective separation and purification method, which combines solvent sublation and ionic liquid aqueous two-phase extraction system. This investigation attempts to study and optimize the partitioning conditions of chloramphenicol (CAP) in ILATPF. An experimental design of response surface methodology (RSM) was used to evaluate the influence of the variables, including the type of ionic liquid (IL), K₂HPO₄ concentration, flotation time and gas flow rate on CAP flotation. Quadratic polynomial models were adjusted to the data to predict the behavior of two responses, namely the partition coefficient (K) and sublation efficiency (E) of CAP. The optimal flotation conditions were found using [C₆mim]Cl, 0.74 g/mL K₂HPO₄, 50 min flotation time and 50 mL/min gas flow rate, which ensured K = 405.71 and E = 93.16 %. It was observed that the effect of the four factors on K and E of CAP was flotation time > gas flow rate > the type of IL > K₂HPO₄ concentration. The ILATPF was proved effective for CAP separation in aqueous phase, and RSM was revealed to be an appropriate and powerful tool for experimental design of CAP separation by ILATPF.     

Synthesis and anion-binding properties of new disulfonamide-based receptors

The synthesis of disulfonamide receptor scaffolds for anion binding is reported. Acyclic receptors are found to tightly bind acetate in MeCN-d₃ with dominant 1:1 stoichiometry, a smaller, sequential 1:2 (H+G) association is also found. Constraint of the disulfonamide receptor into macrocycles serves to eliminate the 1:2 binding stoichiometry and X-ray crystal structures of several macrocyclic receptors allow rationalisation of their affinity for acetate binding. l-Valine derived macrocycles maintain tight 1:1 binding of acetate (K_a^1:1 >10⁴ M⁻¹) in MeCN-d₃ and display preference for oxyanion binding in more competitive MeCN-d₃/2% H₂O.     

Synthesis,crystal structure and properties of a new congruently melting compound,K3ZnB5O10

A new compound, K₃ZnB₅O₁₀, has been synthesized by solid-state reaction. It crystallizes in the monoclinic system, space group P2₁/n with unit–cell parameters a = 7.6391(5) Å, b = 19.2304(13) Å, c = 7.6905(5) Å, β = 116.698(4)° and Z = 4. The structure of the compound is solved by the direct methods and refined to R1 = 0.0286 and wR2 = 0.0600. K₃ZnB₅O₁₀ contains a two-dimensional ZnB₅O₁₀ layer, which forms by connecting isolated double ring [B₅O₁₀] groups and ZnO₄ tetrahedra. The K atoms filling in the interlayer and intralayer link the layers together. Functional groups presented in the sample were identified by FTIR spectrum. UV–vis–NIR diffuse reflectance spectrum exhibits ultraviolet cutoff edge is about 190 nm. The DSC analysis proves that K₃ZnB₅O₁₀ is a congruently melting compound.     

Mechano-chemical synthesis K2MF6 (M = Mn,Ni) by cation-exchange reaction at room temperature

In order to establish the power of mechanochemistry to produce industrially important phosphors, synthesis of K₂MnF₆ has been attempted by the successive grinding reactions of manganese (II) acetate with ammonium fluoride and potassium fluoride. The progress of reaction was followed by ex-situ characterization after periodic intervals of time. Cubic symmetry of K₂MnF₆ was evident from its powder X-ray diffraction pattern which was refined successfully in cubic space group (Fm-3m) with a = 8.4658 (20) Å. Stretching and bending vibration modes of MnF₆²⁻ octahedral units appeared at 740 and 482 cm⁻¹ in the fourier transformed infrared spectrum. Bands at 405 and 652 cm⁻¹ appeared in the Raman spectrum and they were finger-print positions of cubic K₂MnF₆. Other than the ligand to metal charge transfer transition at 242 nm, transitions from ⁴A_2g to ⁴T_1g, ⁴T_2g and ²T_2g of Mn⁴⁺-ion appeared at 352, 429, 474 and 569 nm in the UV–visible diffuse reflectance spectrum of the sample. Red emission due to Mn⁴⁺ was observed in the photoluminescence spectrum with a decay time of 0.22 ms. Following the success in forming cubic K₂MnF₆, this approach has been extended to synthesize cubic K₂NiF₆ at room temperature. All these results confirmed the susceptibility of acetate salts of transition metals belonging to first-row of the periodic table to facile fluorination at room temperature aided by mechanical forces.