Dinuclear palladium(ii) complexes with bridging amidate ligands

New homonuclear dimeric Pd(ii) complexes have been synthesized by the reaction of Pd(en)(2+) or Pd(bipy)(2+) (where en = ethylenediamine and bipy = 2,2'-bipyridine) units with acetamide or by the Pd(ii) mediated hydrolysis of CH(3)CN. In these dimers the two metal centers are bridged by either two amidates or by the combination of one hydroxo group and one amidate ligand. The crystal structures of complexes {[Pd(bipy)](2)(micro-1,3-CH(3)CONH)(2)}(NO(3))(2).H(2)O.1/2(CH(3))(2)CO.1/2CH(3)CN () and {[Pd(bipy)](2)(micro-1,3-CH(3)CONH)(2)}(OTf)(2) () showed intrametallic Pd-Pd distances of 2.8480(8) A () and 2.8384(7) A (), respectively, in accordance with the accepted values for a strong Pd-Pd interaction. The presence of pi[dot dot dot]pi interactions between the bipyridine ligands on the di-micro-amidate complexes of Pd(bipy)(2+) shortens the distance between the two Pd centers and allows the formation of the metal-metal interaction. By contrast, the crystal structure of complex {[Pd(en)](2)(micro-1,3-CH(3)CONH)(2)}(OTf)(2).H(2)O (), (where OTf = triflate) where there is no pi[dot dot dot]pi interaction between the ligands on the metal centers, is also reported, and no Pd-Pd interaction is observed. Additionally, one of the complexes, {[Pd(en)](2)(micro-OH)(micro-CH(3)CONH)}(NO(3))(2) (), presents an interesting hydrogen bonded 3-D network formed by nitrate ions and water molecules. All complexes have been characterized by infrared and (1)H NMR spectroscopy.     

Interaction of cobalt(III) polypyridyl complexes containing asymmetric ligands with DNA

Four asymmetric cobalt(III) complexes, [Co(bpy)₂(aip)]³⁺, [Co(bpy)₂(pyip)]³⁺, [Co(phen)₂(aip)]³⁺, and [Co(phen)₂(pyip)]³⁺ (bpy = 2,2,bipyridine, phen = 1,10-phenathroline), (pyip = 2-(1-pyrenyl)-1H-imidazo[4,5-f][phen], (aip = 2-(9-anthryl)-1H-imidazo[4,5,-f][phen], have been synthesized and characterized. Their interaction with calf thymus DNA (CT-DNA) was investigated by physico-chemical methods and photocleavage. The size and shape of the ligands have a marked effect on the DNA-binding affinity of the complexes. Irradiation of pBR322 DNA with these novel cobalt(III) complexes results in nicking of the plasmid DNA. Toxicity and induced cell death investigations revealed that the complexes of pyip had higher toxicity than those of aip. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Dinuclear Cp* cobalt complexes of the 1,2,4,5-benzenetetrathiolate bischelating ligand

The dinuclear Cp*Co dithiolene complex [Cp*Co(btt)CoCp*] ( 1) is prepared in high yield from the reaction of the bis(dibutyltin) complex of 1,2,4,5-benzenetetrathiolate (btt) with 2 equiv of [Cp*Co(CO)I 2]. Mononuclear complexes are also obtained from 1,2,4,5-tetrakis(isopropylthio)benzene ( 2) and sodium in pyridine, from benzo[1,2- d;4,5- d ']bis(1,3-dithiolane-2,6-dione) ( 3) and ( t )BuOK in tetrahydrofuran, or from benzo[ d]-1,3-dithiolane-2-one ( 7) and ( t )BuOK to afford respectively 4a, 4b, and [Cp*Co(bdt)] ( 6), while [Cp*Co(dmit)] ( 8) is obtained by literature methods. The X-ray structures of the dinuclear complex 1 and the mononuclear complexes 4a and 6 were determined. They are all characterized by Cp* . . . btt face-to-face intermolecular interactions, leading to a recurrent 4-fold symmetry motif. The cyclic voltammograms of the [Cp*Co(dithiolene)] complexes performed in CH 2Cl 2 show reversible Co (III) to Co (II) reduction but irreversible oxidation waves. The large potential difference between the two reduction waves of the bimetallic complex 1 (269 mV) indicates a stable mixed-valence Co (III)-Co (II) state for the reduced [Cp*Co(btt)CoCp*] (-) anion. Upon trimethyl phosphite addition, the mono-P(OMe) 3 adduct [ 1.P(OMe) 3] exhibits a red shift of the low-energy absorption band to the IR region (856 nm, = 13 000 M (-1).cm (-1)), while [ 8.P(OMe) 3] exhibits a 150 nm blue shift. The stability constants of these P(OMe) 3 adducts were determined from UV-vis spectroscopic titration experiments, with, for example, log( K/mol (-1).dm (3)) values of 3.1 and 0.52 for the mono- and bis-adduct of 1, respectively. The electrochemical investigation of 1 and 8 in excess phosphite shows a strong current enhancement upon oxidation, attributable to the catalytic generation of the radical cation P(OMe) 3 (*+).     

Synthesis and characterization of cobalt(III) tetraaza macrocyclic complexes containing chloro and azido ligands

The complexes [Co(L)Cl₂]Cl · 4H₂O (1) and [Co(L)(N₃)₂]N₃ · 2H₂O (2) (L = 3,14-dimethyl-2,6,13,17-tetraazatricyclo [14,4,0^1.18,0^7.12]docosane) have been synthesized, and structurally characterized by X-ray crystallography, spectroscopy and cyclic voltammetry. The crystal structure of (1) is centrosymmetric and the cobalt(III) atom has an axially elongated octahedral geometry with four nitrogen atoms of the macrocycle and two chloride ligands. The cobalt(III) ion in (2) is coordinated to four nitrogen atoms from the macrocycle, and two azide ligands in an octahedral environment, which forms the 1D polymer through hydrogen bonding contacts involving the cation, azide anion and solvent water molecules. Electronic spectra of the complexes also exhibit a low-spin octahedral environment. Cyclic voltammetry of the complexes undergoes a one-electron wave corresponding to Co(III)/Co(II) processes. The electronic spectra and electrochemical behaviors of the complexes are significantly affected by the nature of the axial ligands.     

Dinuclear peroxo complexes of molybdenum(VI) containing Mannich base ligands

Dinuclear molybdenum(VI) peroxo complexes containing Mannich base ligands having formulae [Mo₂O₄(O₂)₂L-L(H₂O)₂] · H₂O [where L-L = N-[1-morpholinobenzyl] acetamide (MBA), N-[1-piperidinobenzyl] acetamide (PBA), N-[1-morpholino(-4-nitrobenzyl)] benzamide (MPNBB), N-[1-piperidino(-3-nitrobenzyl)] benzamide (PMNBB), N-[1-morpholino(-2-nitrobenzyl)] acetamide (MONBA), and N-[1-morpholino(-3-nitrobenzyl)] acetamide (MMNBA)] have been synthesized by stirring ammonium heptamolybdate with excess 30% aqueous hydrogen peroxide followed by treatment with ethanolic solution of corresponding ligands. The complexes have been characterized by elemental analysis, molar conductance, magnetic measurements, infrared (IR), electronic, TGA/DTA, mass spectral, and ¹H NMR studies. The complexes are non-electrolytes and diamagnetic. The IR spectral studies suggest that the ligands are bidentate to metal through carbonyl oxygen and ring nitrogen. Thermal analyses provide conclusive evidence for the presence of coordinated, as well as lattice water in the complexes. Dinuclear complexes preserve the individuality of the molybdenum oxo peroxo core. The complexes exhibit higher antibacterial activity against bacterium Ralastonia solanacearum (Pseudomonas solanacearum) than the free ligands.     

Dinuclear iron (III) complex with a bridging diphenylphosphate and two terminal diphenylphosphate ligands

Ｐｕｒｐｌｅａｃｉｄｐｈｏｓｐｈａｔａｓｅ(ＰＡＰ)ｃａｔａｌｙｚｅｓｔｈｅｈｙｄｒｏｌｙｓｉｓｏｆａｃｔｉｖａｔｅｄｐｈｏｓｐｈｏｒｉｃａｃｉｄｅｓｔｅｒｓｉｎｃｌｕｌｄｉｎｇｎｕｃｌｅｏｓｉｄｅｄｉａｎｄｔｒｉｐｈｏｓｐｈａｔｅｓａｎｄａｒｙｌｐｈｏｓｐｈａｔｅｓｕｎｄｅｒａｃｉｄｉｃｃｏｎｄｉｔｉｏｎｓ[1].Ａｌｔｈｏｕｇｈｔｈｅｙｈａｖｅｂｅｅｎｉｓｏｌａｔｅｄｆｒｏｍａｖａｒｉｅｔｙｏｆｍａｍｍａｌｉａｎ,ｐｌａｎｔ,ａｎｄｍｉｃｒｏｂｉａｌｓｏｕｒｃｅｓ,ｏｎｌｙｔｈｅｅｎｚｙｍｅｓｉｓｏ…     

Trans-bis(difluoroborondimethylglyoximato) cobalt(III) complexes containing imidazole and chloride or thiocyanate as axial ligands

Halo- and pseudohalocobaloxime complexes [Co(DH)₂(Im)(X)] (X = Cl or CNS), containing imidazole (Im) or its derivatives, interact with BF₃·Et₂O to form a series of cobalt(III) complexes, [Co(DBF₂)₂(Im)(X)], that contain a 14-membered macrocyclic ligand. These light coloured microcrystalline solid complexes, stable under ordinary conditions, were characterized on the basis of elemental analyses, conductivity measurements, electronic, IR, NMR and mass spectra, and thermogravimetric and cyclic voltammetric studies, and are shown to posses a six-coordinated trans-octahedral configuration. The mass spectra do not reveal any molecular-ion peak whereas the results of thermolyses reveal the decreased stability of these complexes compared to the corresponding cobaloximes and yield polymeric intermediates, and finally forming Co₃O₄ as the end product. Cyclic voltammetric studies show four reductive waves and an oxidative wave, confirming an oxidation number of III for the central cobalt atom.     

Trans-bis(dimethylglyoximato) cobalt(III) complexes containing imidazole and thiocyanate as axial ligands

Imidazole(Im), benzimidazole(BzIm), morpholine (Morph) and their derivatives react with Co(CNS)₂ and dimethylglyoxime(DH₂) in ethanolic medium in presence of air to form a number of new cobalt(III) complexes of the type trans-[Co(DH)₂(L)(SCN)], which are characterised on the basis of electronic and IR spectra, NMR (¹H and ¹³C) and mass spectra as well as thermogravimetric (TG-DTA) and conductance measurements. The thiocyanate groups are S-bonded. The NMR observations suggest that in solution these compounds exist as mixtures of the neutral species [Co(DH)₂(L)(SCN)] and the salt [Co(DH)₂(SCN)₂]^? [Co(DH)₂(L)₂]⁺. The mass spectra does not show the molecular ion peak of the complex. The TG-DTA measurements show that the thermolysis of these complexes proceeds through polymeric intermediates giving CO₃O₄ as the end product.     

Preparation and photochemistry of cobalt(III) amino and amino acidato complexes containing tripodal polypyridine ligands

The photochemical reactivities of cobalt(III)-diamine and cobalt(III)-amino acid compounds have been compared using complexes that also contain polypyridyl ligands. Metallacyclic complexes result from UV-induced photodecarboxylation reactions of the amino acid complexes. UV-irradiation of closely related complexes with amine donors replacing the carboxylate donors does not lead to the production of the same metallacyclic products. The reported UV-induced fragmentation of amine donors and subsequent metallacycle formation appears not to be a general reaction. Nine cobalt(III) complexes of polypyridyl ligands have been structurally characterised, including four that also contain amino acid ligands and one that contains a three-membered metallacyclic ring.     

Pentadentate terpyridine-catechol linked ligands and their cobalt(III) complexes

A series of novel pentadentate terpyridine-catechol linked ligands were prepared, in which the terpyridine and catechol moieties were linked together by (CH2)n chains of different lengths (n = 4-6). Together with 1-methylimidazole, these ligands formed low-spin, six-coordinate Co(III) complexes. Two of the complexes (n = 4, 5) were characterized by X-ray crystallography [n = 4, monoclinic, P2(1)/c, a = 14.957(7) A, b = 10.585(9) A, c = 23.033(7) A, beta = 106.01(3) degrees, V = 3505(3) A3, Z = 4, R = 0.063; n = 5, monoclinic, P2(1)/c, a = 8.848(7) A, b = 15.78(1) A, c = 25.455(7) A, beta = 93.90(5) degrees, V = 3544(3) A3, Z = 4, R = 0.056], which revealed similar structures around the Co(III) centers but different conformations for the (CH2)n linkers. The (CH2)4 linker showed a straight, symmetric conformation whereas the (CH2)5 linker showed a curved conformation that allowed the accommodation of one extra CH2 unit, suggesting that the (CH2)4 linker presents the "best-fit" length for these complexes.     

Dinuclear iridium(III) complexes consisting of back-to-back tpy-(ph)n-tpy bridging ligands (n = 0, 1, or 2) and terminal cyclometallating tridentate N-C-N ligands

Three dinuclear iridium(III) complexes consisting of a conjugated bis-tpy type bridging ligand and cyclometallating capping tridentate ligands of the 1,3-di-2-pyridylbenzene family have been prepared (tpy, 2,2',6',2' '-terpyridine). The two tpy units of the bridge are connected via their back-positions (4') either directly or with a p-phenylene or p-biphenylene spacer. The synthesis relies on the reaction between the dinuclear [Ir(dpb)Cl2]2 complex (dpb-H =1,3-dipyridyl-4,6-dimethylbenzene) and the corresponding bis-tpy ligand. Electrochemical measurements afford metal-centered oxidation and ligand-centered reduction potentials; from the oxidation steps, no evidence is obtained for a strong coupling between the two iridium(III) subunits of the dinuclear species. For all complexes, ground-state absorption data in the 380 nm to visible region show a trend which is consistent with the presence of charge-transfer (CT) transitions involving different degrees of electronic delocalization at the bridging ligands. (dpb)Ir(tpy-tpy)Ir(dpb)4+ exhibits an appreciable luminescence at room temperature (phi = 3.0 x 10(-3); tau = 3.3 ns), whereas no emission from the other binuclear complexes is detected. All binuclear complexes luminesce at 77 K, and a metal-to-ligand CT nature for (dpb)Ir(tpy-tpy)Ir(dpb)4+ is suggested, whereas a ligand-centered (LC) emission is proposed for (dpb)Ir(tpy-(ph)2-tpy)Ir(dpb)4+ on the basis of the comparison with the phosphorescence properties of the free bridging ligand, tpy-(ph)2-tpy. Transient absorbance experiments at room temperature afford the absorption spectra and lifetimes of the non-emissive excited states. For (dpb)Ir(tpy-ph-tpy)Ir(dpb)4+ and (dpb)Ir(tpy-(ph)2-tpy)Ir(dpb)4+, the spectra exhibit a broad profile peaking around 780 nm, quite intense in the case of (dpb)Ir(tpy-(ph)2-tpy)Ir(dpb)4+, and lifetimes of 160 and 440 ps, respectively.     

μ-Peroxodicobalt(III) complexes containing aromatic ligands

A series of new μ-peroxodicobalt(III) complexes have been prepared and characterized. Studies of the chemical and physical properties of these complexes were carried out using IR, electronic and NMR spectroscopy along with conductivity, magnetic susceptibility and thermogravimetric measurements. The complexes [Co₂(dpk·dien)₂ (dpk·H₂O)O₂] (ClO₄)₄·H₂O, [Co₂(dpk)₄(py)₂O₂](ClO₄)₄·4H₂O, [Co₂(dpk·H₂O₄(py)₂O₂] (ClO₄)₄, and [Co₂(dpk)₂(terpy)₂O₂](ClO₄)₄ were prepared by bubbling oxygen through a solution containing Co(NO₃)₂, NaClO₄, and the appropriate ligand mixture. Electronic spectral studies are consistent with the formulation as binuclear peroxo complexes. Thermogravimetric studies reveal the stoichiometric loss of O₂ and H₂O below 100°C. The auxiliary ligands, pyridine (py), diethylenetriamine (dien) and terpyridine (terpy) are lost at higher temperatures. Molar conductance of these complexes is indicative of a 4:1 electrolyte while magnetic susceptibility measurements indicate the diamagnetic character of the above four complexes. Three additional complexes of Co(II) containing di-2-pyridyl ketone (dpk) and terpy were prepared to compare spectral changes upon oxygenation.     

Cyclopentadienyl- and pentamethylcyclopentadienyl-rhodium(III) complexes containing isocyanide ligands

The complexes [(η⁵-C₅H₅)RhCl₂]₂ and [(η⁵-C₅Me₅)RhCl₂]₂ react with stoichiometric amounts of isocyanide ligands L to give (η⁵-C₅H₅)RhLCl₂ and (η⁵-C₅Me₅)RhLCl₂ (L = CNC₆H₁₁, CNC₆H₄CH₃-p); an excess of ligand L reacts further with (η⁵-C₅Me₅)RhLCl₂ to give the cationic complex [(η⁵-C₅Me₅)RhL₂Cl]⁺ which was isolated as tetraphenylborate salt. The cationic complexes [(η⁵-C₅Me₅)RhL(PPh₃)Cl]⁺ and [(η⁵-C₅Me₅)Rh(Ph₂PC₂H₄PPh₂)Cl]⁺ were obtained in the reaction of (η⁵-C₅Me₅)RhLCl₂ with PPh₃ and Ph₂PC₂H₄PPh₂ respectively. Unidentified solids which do not contain the cyclopentadienyl moiety were obtained in the analogous reactions of (η⁵-C₅H₅)RhLCl₂ with an excess of isocyanide or of tertiary phosphine.The complexes (η⁵-C₅H₅)Rh(CNC₆H₁₁)Cl₂ and (η⁵-C₅Me₅)Rh(CNC₆H₁₁)Cl₂ react with SCN^? or SeCN^? giving the corresponding dithiocyanate or diselenocyanate derivatives in which the pseudohalogen groups are S- or Se-bonded to the metal atom. The analogous reactions with C₆Cl₅MgCl gave the chiral complexes (η⁵-C₅H₅)Rh(CNC₆H₁₁)(C₆Cl₅)Cl and (η⁵-C₅Me₅)Rh(CNC₆H₁₁)(C₆Cl₅)Cl.The potentially chelating anion Ph₂PSS^? reacts with (η⁵-C₅H₅)Rh(CNC₆H_n11)Cl₂ and (η⁵-C₅Me₅)Rh(CNC₆H₁₁)Cl₂ to give (η⁵-C₅H₅)Rh(CNC₆H¹¹)(SSPPh₃)Cl and (η⁵-C₅Me₅)Rh(CNC₆H¹¹)(SSPPh₂)Cl in which the dithio ligand acts as monodentate; these compounds react with MeI or EtI to give the dihalide derivatives and the esters Ph₂PSSMe and PSSEt. The complex [(η⁵-C₅Me₅)Rh(CNC₆H₁₁)(SSPPh₂)]Cl was obtained by refluxing a benzene solution of the corresponding neutral complex; the cyclopentadienyl derivative failed to give the analogous chelate complex.The complexes (η⁵-C₅H₅)RhLCl₂, (η⁵-C₅Me₅)RhLCl₂ and [(η⁵-C₅Me₅)RhL₂Cl]⁺ (L = CNC₆H₁₁) were found to be unreactive towards amines.     

Reactions of 2-pyridinethiolate cobalt(III) complexes with pyridinethiolate or benzenethiolate ligands

Four half-sandwich cobalt complexes, Cp^∗Co(2-PyS)₂ (2), Cp^∗Co(2-PyS)₂ · HI (3), Cp^∗Co(2-PyS) (4-PyS) (4), (Cp^∗Co)₂(μ-PhS)₂(μ-2-PyS)I (5) [Cp^∗ = pentamethylcyclopentadienyl, 2-PyS = 2-pyridinethiolate, 4-PyS = 4-pyridinethiolate, PhS = benzenethiolate] were successfully synthesized by the reactions of 2-pyridinethione, lithium 4-pyridinethiolate and lithium benzenethiolate with Cp^∗Co(2-PyS)I (1), respectively. Complexes 2 and 3 have the structures with two 2-pyridinethiolates ligands coordinated to the cobalt atom. Two different pyridinethiolates ligands can be identified in complex 4. The molecular structure of 5 consists of two Cp^∗-Co fragments, which are triply bridged by three sulfur atoms from different ligands. The molecular structures of 3 and 5 were determined by X-ray crystallographic analysis. All the complexes have been well characterized by elemental analysis, NMR and IR spectra.     

Dinuclear complexes with bis(benzenedithiolate) ligands

As a part of a broader study directed towards helical coordination compounds with benzenedithiolate donors, we have synthesized the bis(benzenedithiol) ligands 1,2-bis(2,3-dimercaptobenzamido)ethane (H(4)-1) and 1,2-bis(2,3-dimercaptophenyl)ethane (H(4)-2). Both ligands form dinuclear complexes with Ni(II), Ni(III) and, after air-oxidation, Co(III) ions under equilibrium conditions. Complexes (NEt(4))(4)[Ni(II)(2)(1)(2)] (11 b), (NEt(4))(2)[Ni(III)(2)(1)(2)] (13), and Na(4)[Ni(II)(2)(2)(2)] (14) were characterized by X-ray diffraction. In all complexes, two square-planar [Ni(S(2)C(6)H(3)R)(2)] units are linked in a double-stranded fashion by the carbon backbone and they assume a coplanar arrangement in a stair-like manner. Cyclic voltammetric investigations show a strong dependence of the redox potential on the type of the ligand. The substitution of 1(4-) for 2(4-) on nickel (-785 mV for 11 b versus -1130 mV for 14, relative to ferrocene) affects the redox potential to a similar degree as the substitution of nickel for cobalt (-1160 mV for [Co(2)(1)(2)](2-)/[Co(2)(1)(2)](4-), relative to ferrocene). The redox waves display a markedly less reversible behavior for complexes with the shorter bridged ligand 2(4-) compared to those of 1(4-).     

Allyl rhodium(III) complexes containing heterocyclic nitrogen ligands

Summary A series of hexacoordinated Rh^III complexes of general formula trans-[RhCl₂(allyl)(N-N)] (allyl = C₃H₅ or C₄H₇; N- = 1,10-phenanthroline, 2,9-dimethyl-1,10-phenanthroline, 4,7-diphenyl-1,10-phenanthroline, 2,2-bipyridine or 4,4-dimethyl-2,2-bipyridine) have been synthesized and characterized by spectroscopic methods. The complexes have an octahedral geometry with the Cl ligands coordinated in the trans positions. The catalytic activity of [RhCl₂(C₄H₇)(phen)] with respect to hydrogenation of alkenes has been investigated.