New insights into the reaction of zinc alkyls with dioxygen

Studies on the reaction of zinc alkyls with O2 are reported which demonstrate that the selective oxygenation of organozinc compound is viable. The reaction of [EtZn(azol)]n (azol = deprotonated 1-aziridineethanol) with an excess of dry O2 in toluene affords the zinc ethylperoxide [EtOOZn(azol)]2[EtZn(azol)]2, while the analogous reaction between Me2Zn and O2 results in the isolation of the Me6Zn7(OMe)8 cluster in high yield.     

New insights into the reaction mechanisms of phenylium ions with benzene

The chemistry of phenylium (benzen-1-ylium) cations with benzene is investigated by using a guided ion beam tandem mass spectrometer. The main ionic products from the reaction of C6H5+ with C6H6 are observed at m/z 155 (covalent adduct C12H11+), 154 (C12H10+), 153 (C12H9+), 129 (C10H9+), and 115 (C9H7+). We propose a mechanism according to which channels at m/z 154-115 are formed by elimination of stable neutral molecules (such as H2, C2H2, C3H4) from the collision complex C12H11+, for which the most plausible structure is protonated biphenyl. The proposed mechanism is demonstrated by using partial isotopical labeling of reagents to look for possible H/D atom scrambling. Almost the same ions are produced when benzene is chemically ionized at atmospheric pressure in an APCI source from which oxygen is excluded. Because an ion trap analyzer is coupled to this source, tandem MS experiments can be performed, allowing structural details to be established. Moreover, the use of partially deuterated reagents has allowed the detection of minor reactive channels resulting from charge exchange and H-/D- hydride-transfer processes. Theoretical calculations show that the most stable structure for ions at m/z 129 C10H9+ is that of protonated naphthalene, resulting from the loss of an acetylene molecule by the condensation product, with a reaction exothermicity of 1.27 eV. We have found a possible barrierless pathway for such a channel that might be viable for the synthesis of naphthalene, the smallest PAH, even at low collision energies and therefore would be of particular astrochemical relevance.     

A chronological review of photochemical reactions of ferrioxalate at the molecular level: New insights into an old story

Owing to its outstanding photoactivity, ferrioxalate is originally used as an actinometer and subsequent work has discovered that photochemistry of ferrioxalate is also fundamentally or technically important in atmospheric chemistry and water treatment. While the overall products generated from photolysis of ferrioxalate are known to include Fe(II), a series of oxidizing (e.g., ^?OH, O₂^??/HO₂^??) or reducing (C₂O₄^??/CO₂^??) radicals and H₂O₂, however, at the molecular level, the primary step of the photoreaction of ferrioxalate remains as an unsolved mystery due to the difficulty in examining such ultrafast processes. Benefiting from the development of time-resolved spectroscopy, this old question has been studied with increasing vigor recently, by means of such ever-more-sophisticated techniques (e.g., flash photolysis, time-resolved X-ray absorption spectroscopy (XAS), femtosecond infrared (IR) absorption spectroscopy, ultrafast photoelectron spectroscopy (PES)). There are two contrary views on the primary reaction mechanism: (1) Intramolecular electron transfer (ET) precedes the cleavage of the metal-ligand bond; (2) The dissociation of C–C or Fe–O bond occurs before intramolecular ET. Thus, this review presents a comprehensive summary about the overall reaction mechanism and molecular level mechanism of ferrioxalates. In chronological order, we have elaborated two predominant but controversial views from the perspectives of different experimental approaches. Some challenges and research opportunities in this active field are also briefly discussed.     

Mechanistic insights into the palladium-induced domino reaction leading to ketones from benzyl beta-ketoesters: first characterization of the enol as an intermediate

The monitoring by UV spectroscopy of the Pd-catalyzed hydrogenolysis in acetonitrile of 2-methyl-2-benzyloxycarbonyl-1-indanone and 2-methyl-2-benzyloxycarbonyl-1-tetralone showed the successive formation of corresponding beta-ketoacids and enols to deliver finally the ketones. Some factors which influence the stability of the intermediates are determined. In contrast to the above benzyl beta-ketoesters, the enol was not detected from benzyl (2-methylinden-3-yl) carbonate.     

New insights into the bromination reaction for a series of alkenes--a computational study

Ab initio calculations were carried out for the reaction of Br2 with ethene, propene, isobutene, fluoroethene, chloroethene, (E)-1,2-difluoroethene, and (E)-1,2-dichloroethene. For ethene the calculations were also carried out for the reaction with 2Br2. Geometries were optimized at the HF, MP2, and B3LYP levels using the 6-31G(d) and 6-31+G(d) basis sets where for Br both the standard 6-31G and the Binning-Curtiss bromine basis sets were used. Energies were also calculated at the G3MP2 and G3MP2B3 levels. For a single Br2 one mechanism involves a perpendicular attack by Br2 to the C=C bond, and a second mechanism consists of sidewise attack by Br2. Alkenes can react with 2Br2 via several mechanisms, all leading to the dibromo product. The most likely pathway for the reaction of ethene and 2Br2 involves a trans addition of a Br atom from Br3- to one of the bromonium ion carbons. Activation energies, free energies, and enthalpies of activation along with thermodynamic properties (DeltaE, DeltaH, and DeltaG) for each reaction were calculated. We have found that the reaction of ethene with 2Br2 is favored over reaction with only Br2. There is excellent agreement between the calculated free energies of activation for the reaction of ethene and 2Br2 and experimental values in nonpolar aprotic solvents. However, the free energies of activation for the reaction with a single Br2 agrees well with the experimental results for polar protic solvents only when the reaction is mediated by a solvent molecule. A kinetic expression is proposed that accounts for the difference between bromination of alkenes in protic and nonprotic solvents. Some previously unknown heats of formation are reported.     

1,2-Oxopalladation versus pi-allyl palladium route. A regioconvergent approach to a key intermediate for cyclopentanoids synthesis. New insights into the Pd(II)-catalyzed lactonization reaction

Regioconvergent synthesis of the key lactone 1 from an equimolar mixture of the two olefins 4 and 5 was achieved by unique Pd(II) chemistry. The synthetic versatility of lactone 1 has been demonstrated in the synthesis of iridoids and of the endo-Corey lactone 2, which is a key intermediate for the F(2)-isoprostane synthesis. Upon exposure of the sodium salts of 4 and 5 to a catalytic amount of Pd(OAc)(2) under oxygen, in the presence of AcOH, an isomeric lactone 12 was obtained in addition to the title compound 1. The Pd(II) lactonization was optimized by fine-tuning all the factors participating in the catalytic cycle: solvent, oxidant, co-oxidant, and Pd(II) source. The Hosokawa's heterobimetallic couple emerged as the catalyst of choice. With a Cu(II)-Pd(II) couple, the redox process was transferred to copper, and the formal oxidation state of palladium remained constant during the reaction. By virtue of this new methodology, lactone 1 was obtained in a rewarding 60% yield, along with isomeric lactone 12 in 30% yield. A detailed mechanistic study was carried out in order to elucidate the formation of lactones 1 and 12. Lactone 1 was formed from either olefin 8 or olefin 10; on the other hand, lactone 12 was formed exclusively from olefin 10. An intramolecular 1,2-acyloxypalladiation was invoked for the transformation of 8 into 1, whereas the pi-allyl complexes 13 and 11 were involved in the transformation of olefin 10 into 12 and 1, respectively.     

The structure of gascardic acid from an x-ray diffraction study

The complete structure of the unique tricyclic sesterterpene gascardic acid is proposed based on a single crystal x-ray diffraction analysis of the dicyclohexylammonium salt.     

New insights into the Belousov-Zhabotinskii reaction derived from EQCM measurements at a gold electrode

Electrochemical quartz crystal microbalance experiments were used to study the classical Belousov-Zhabotinskii (BZ) homogeneous oscillating system. This system involves 2 × 10(-3) M Ce(III), 0.28 M malonic acid and 0.063 M bromate as the main initial components in 1 M sulfuric acid solution. The gold-evaporated electrodes on a 10 MHz AT-cut quartz crystal were used for potentiometric and amperometric studies while the changes in crystal frequency provided mass data. Under open-circuit conditions, during the BZ reaction, oscillations of the gold electrode potential in the range ca. 0.8 to 1.07 V (SCE) with a period about 80 s occurred. They were accompanied by periodic 10-15 ng [i.e. ca. 45-70 ng cm(-2)] changes in the electrode mass. At more positive potentials a decrease in electrode mass occurred, while the mass increased at more negative potentials. At a constant applied electrode potential, corresponding to either the upper or the lower potential limit attained under open-circuit conditions, periodic pulses of cathodic current occurred and were accompanied by mass changes. A continuous decrease in the electrode mass occurred at 1.06 V. A detailed examination of the gold electrode behavior in the solutions containing individual components of the system using cyclic voltammetry and quartz crystal microgravimetry provided the information needed to interpret the mass changes that occur in the complete system. No significant changes in the electrode mass occurred in sulfuric acid solution in the potential range where current and mass oscillations take place in the full BZ reaction solution. The same result was found in sulfuric acid solutions containing either Ce(III) or malonic acid. Dissolution of gold occurred in a sulfuric acid solution containing bromate or bromide ions. Adsorption of bromide ions on gold electrode occurred in Br(-)-containing sulfuric acid solution at more negative potentials. In the BZ system, dissolution of gold in the presence of oxidizing (bromate) and complexing (bromide) species causes the decrease in the electrode mass that accompanies the positive potential jump under open-circuit conditions, or the current pulse that occurs at more negative applied constant potentials. Cathodic current pulses occurring at a constant electrode potential (either 0.8 or 1.06 V) are associated with the reduction of Ce(IV) formed as a result of periodic homogeneous oxidation of Ce(III) by bromate. Bromide ions formed in the course of the BZ reaction appear to play a significant role in electrode mass changes, causing a mass decrease at more positive potentials due to dissolution of gold, and a subsequent mass increase at more negative potentials due to adsorption processes.     

Croconic acid and alkali metal croconate salts: some new insights into an old story

The solid-state structures of a series of alkali metal salts of the croconate dianion (C(5)O(5)(2-)) and of croconic acid (H(2)C(5)O(5)) have been determined. The alkali metal croconates were obtained by ring contraction of rhodizonic acid (H(2)C(6)O(6)), upon treatment with alkali metal hydroxides and recrystallisation from water. The novel species Na(2)C(5)O(5) x 2H(2)O, Rb(2)C(5)O(5) and Cs(2)C(5)O(5), as well as the mixed hydrogencroconate/croconate salt K(3)(HC(5)O(5))(C(5)O(5)) small middle dot2 H(2)O are described and compared with the Li(+), K(+) and NH(4)(+) salts. Single crystals of croconic acid were obtained by crystallisation of croconic acid in the presence of HCl. Crystal structure determinations showed that the C(5)O(5)(2-) ions tend to organize themselves in columns. The interplanar separations lie in the narrow range 3.12-3.42 A and do not necessarily reflect the presence of pi-stacking interactions. It is argued that the small interplanar separation is the result of a compromise between packing of flat croconate units and the spherical cations together with the water molecules that fill the coordination spheres of the alkali metal atoms.     

New insights on reaction dynamics from formaldehyde photodissociation

We review the photodissociation dynamics of formaldehyde with an emphasis on recent calculations that make use of a global ab initio-based potential energy surface for the S(0) state. These calculations together with recent experiments reveal striking departures from conventional transition state theory for the formation of the molecular products H(2) + CO. The evidence for this departure is reviewed in detail by examining properties of the new potential surface and results of quasiclassical trajectory dynamics calculations using this surface. We also review very recent work on the dynamics governing the formation of radical products, H + HCO. These products can be formed on the T(1) surface as well as the S(0) one, and we present some results contrasting the dynamics on these two surfaces. This work makes use of a new semi-global ab initio-based T(1) potential energy surface.     

Mechanistic insights into the stepwise Diels-Alder reaction of 4,6-dinitrobenzofuroxan

The stepwise Diels-Alder reaction between 1-trimethylsiloxy-1,3-butadiene and 4,6-dinitrobenzofuroxan is explored using state-of-the-art computational methods. The results support a stepwise mechanism via a persistent intermediate, however, not the one previously reported (Lakhdar et al., Chem. Eur. J.2007, 16, 5681) but a heterocyclic adduct. The novel DFT functional M062X and the SCS-MP2 method were essential to reproduce a reasonable potential energy surface for this challenging system.     

High-resolution neutron powder diffraction study on the structure of Sr2SnO4

From the high-resolution time-of-flight neutron powder diffraction data, the crystal structure of Sr₂SnO₄ at the temperature range between 4 and 300 K has been investigated. The Rietveld refinement has shown that Sr₂SnO₄ belongs to the space group Pccn, which can be derived from the tetragonal K₂NiF₄ structure by tilting the SnO₆ octahedra along the [100]_T- and [010]_T-axis, respectively, with non-equal tilts. The earlier reported first-order phase transition in Sr₂SnO₄, from Bmab to P4₂/ncm, has not been observed.     

An x-ray diffraction study of nonlinear polyethylene. I. Room-temperature observations

In this investigation on samples of high- and low-density polyethylene and ethylene-vinyl acetate copolymers, crystallinities ?_W and crystalline densities ρ_cW were obtained with the aid of wide-angle x-ray scattering (WAXS) methods. From small-angle x-ray scattering (SAXS) the following characteristics were obtained either directly or by combination with the WAXS data: values, or limiting values, of the crystallinity ?_S; crystal densities ρ_cS; thicknesses of the diffuse boundary layer; number-average thicknesses of the crystalline and amorphous layers; and both number and weight averages of the long periods. It was shown that a discrepancy between ?_S and ?_W cannot be attributed to the occurrence of large amorphous regions outside the regular stacks of lamellae; the data were reconciled by assuming that the WAXS crystallinities pertain to the cores of the crystalline lamellae, whereas part of the diffuse boundary layers is comprised in the values of ?_S. The ρ_cW and ρ_cS data of the nonlinear samples show systematic differences, which were attributed to partial incorporation of side groups in the crystalline regions at a concentration estimated to be of the order of 20–40% of the overall concentration. With increasing side-group concentration, the thickness of the core of the crystalline lamellae was found to approach the average length of the linear chain segments between side groups. On the basis of these observations a scheme for the crystallization of nonlinear polyethylene is proposed according to which a number of side groups is encapsulated by the growing crystal. The data can be explained by assuming that all chains, offered at a crystal face where growth takes place, crystallize directly, irrespective of whether the crystallizing stem carries a side group. Further crystallization would then proceed by chain folding at both ends of the first stem, until a noncrystallizable unit is met. In this scheme, allowance is made for about half the stems in the crystals to be connected by folds; this is required in view of the “overcrowding” effect. Finally, the effect of cooling rate and molecular weight on the thicknesses of the crystalline and amorphous layers is discussed, and differences between the amorphous densities of high-and low-density polyethylene are noted.     

Are ionic solids really built of ions? New evidence from x-ray diffraction

A new, accurate, low-temperature X-ray analysis of lithium tetrafluoroberyllate, Li₂BeF₄, reveals that the charge density in this crystal is better represented as a superposition of spherical neutral-atom charge distributions than as a superposition of ionic charges. The two distributions are so similar that they are hardly distinguishable by examination of the total charge density in real space. However, the two models are clearly differentiated by analysis of the weak low-order reflections; the measured intensities are reproduced better by calculations based on neutral-atom scattering curves. This result may appear to run counter to the current conventional wisdom concerning ionic solids, but it is unlikely to have any important practical consequences.     

New insights into the structure of polyelectrolyte complexes

The formation of polyelectrolyte complexes (PECs) from oppositely charged linear polyelectrolytes (PELs) was studied using static light scattering at various salt concentrations. The PELs used were poly(allylamine hydro chloride) (PAH) and the two polyanions poly(acrylic acid) (PAA) and poly(methacrylic acid) (PMAA). Physical characteristics such as the radii of gyration, molecular weights, and water contents of the PECs were determined at various molar mixing ratios. Despite relatively small differences in chemical structure between PAA and PMAA, fairly large differences were detected in these physical characteristics. Generally, PECs comprising PMAA were larger and contained more water. Moreover, by using cryogenic transmission electron microscopy, transmission microscopy and atomic force microscopy, shape and structure of the prepared PECs were investigated both in solution and after drying. The PECs were found to be spherical in solution and the shape was retained after freeze-drying. PECs adsorbed on silica surfaces and dried in air at room-temperature still showed a three-dimensional structure. However, the relatively low aspect ratios indicated that the PECs collapsed significantly due to interactions with the silica during adsorption and drying. At intermediate ionic strengths (1-10 mM), stagnation point adsorption reflectometry (SPAR) showed that the adsorption of low charged cationic PAH-PAA PECs on silica surfaces increased if the pH value was increased from pH 5.5 to 7.5.     

New insights into the solubilization of Bodipy dyes

Several Bodipy dyes were synthesized with various substituents designed to improve the water solubility. Among the different synthetic strategies protection of sulfonate groups by pyrrole of indopyrrole appears efficient but the deprotection step does not offer viable routes. Conversion of the bromopyrene or iodo Bodipy compounds to sulfobetaine derivatives is feasible either by cross-coupling directly the ethynylsulfobetaine or by first cross-coupling 1-(N,N-dimethylamino)-prop-2-yne followed by quaternization of the dimethylamino residue with 1,3-propanesultone. Some of these dyes (Bodipy’s and pyrene) are reasonably soluble in water and remain highly fluorescent in polar solvents and water.     

New insights into NIS-promoted aminocyclization. Synthesis of decahydroquinolines from 2-allylcyclohexylamines

Bishomoallylic secondary amines embodying the 2-allyl-N-benzylcyclohexylamine unit react with NIS to undergo cyclization through 6-endo processes in either the cis or trans series. Nevertheless, when the resulting cis-3-iododecahydroquinolines are treated with Al2O3, the exo derivatives evolve into octahydroindoles and the endo derivatives keep the same backbone, the configuration being retained in the generated alcohols.