Luminescent silicon nanoparticles with magnetic properties – production and investigation

Silicon nanoparticles (nSi) with unusual properties were studied. After suggested treatment they became luminescent and also acquired a magnetic moment. Nanoparticles were prepared by laser pyrolysis of silane in a gas flow reactor followed by chemical treatment in methanol (MeOH) + HF + FeCl₃ solution. After the treatment. nanoparticles gained stable luminescence with the peak position dependence on the excitation wavelength. With increasing of the excitation wavelength from 365 to 456 nm, the photoluminescent peak shifted from 632 to 665 nm. Luminescence of such nanoparticles had blue shift in comparison with the nanoparticles etched in widely-used solution for the silicon—MeOH + HF + HNO₃. Moreover, after such treatment the magnetic moment of nanoparticles appeared, which is not inherent for the as-prepared nSi. Multifunctional silicon nanoparticles with both stable luminescence and magnetic moment at the same time are perspective for biology and medicine use as the optical and magnetic markers.     

Superparamagnetic nickel nanoparticles obtained by an organometallic approach

Nickel nanoparticles were prepared by decomposition of the organometallic precursor Ni(COD)₂ (COD=cycloocta-1,5-diene) dissolved in organic media in the presence of anthranilic acid as stabilizer. Transmission electron microscopy revealed nickel nanoparticles with a mean size of 4.2 ± 1.1 nm and selected area electron diffraction showed the formation of fcc nickel. FTIR spectroscopy confirmed the presence of modified anthranilic acid on the surface of the Ni nanoparticles suggesting that it is able to interact with the metal particles. The magnetic response of the nanoparticles was established as being of superparmagnetic character, for which a detailed quantitative analysis resulted in a mean magnetic moment of 2652 μ_B per particle together with a blocking temperature of 32 K.     

The influence of thermal annealing on the structural and magnetic properties of gold nanoparticles

In the past few years ferromagnetic-like behavior has been reported in metal gold nanoparticles coated with diverse organic surfactants. In this work we report on the effect of thermal annealing on the ferromagnetic-like behavior of oleic acid and oleylamine coated gold nanoparticles of about 7 nm size. The magnetic moment of the “as prepared” sample is about 3×10⁻² emu/g and the coercive field is 200 Oe at 10 kOe and 5 K, after the annealing the behavior changes from ferromagnetic-like to paramagnetic and the magnetization at 10 kOe decreases at a factor of 10. These results are compared with those obtained for oleylamine coated gold nanoparticles, which are diamagnetic at room temperature.     

Effect of silver nanoparticles with different shapes on luminescence of samarium complex at two different excitation wavelengths

The luminescence properties of Sm(TTFA)₃ complex in presence of the silver (Ag) nanoparticles with size ranged from 80 nm to 120 nm and different shapes (nanorod, cube, tetrahedron, and nanowire) were investigated at two different excitation wavelengths of 397 nm and 350 nm, which was resonant and off-resonant excitation, respectively. The luminescence enhancement for the resonant excitation was much greater than that for the off-resonant excitation. The electric and magnetic dipole transitions were affected by the Ag nanoparticles and the results showed that their emission enhancement depended on the balance of the overlap between the emission wavelengths and the localized surface plasmon resonant of nanoparticles and their sensibility to the variation of local environments. The enhancement and quenching of the luminescence were both observed at the resonant excitation.     

Fabrication of magnetic gold nanorod particles for immunomagnetic separation and SERS application

The preparation and application of rod-shaped core–shell structured Fe₃O₄–Au nanoparticles for immunomagnetic separation and sensing were described for the first time with this study. To synthesize magnetic gold nanorod particles, the seed-mediated synthetic method was carried out and the resulting nanoparticles were characterized with transmission electron microscopy (TEM), ultraviolet visible spectroscopy (UV–Vis), energy-dispersive X-ray (EDX), and X-ray diffraction (XRD). Magnetic properties of the nanoparticles were also examined. Characterization of the magnetic gold nanorod particles has proven that the resulting nanoparticles were composed of Fe₃O₄ core and the gold shell. The rod-shaped gold-coated iron nanoparticles have an average diameter of 16 ± 2 nm and an average length of about 50 ± 5 nm (corresponding aspect ratio of 3). The saturation magnetization value for the magnetic gold nanorod particles was found to be 37 emu/g at 300 K. Rapid and room temperature reaction synthesis of magnetic gold nanorod particles and subsequent surface modification with E. coli antibodies provide immunomagnetic separation and SERS application. The analytical performance of the SERS-based homogenous sandwich immunoassay system with respect to linear range, detection limit, and response time is also presented.     

Synthesis of single-crystal Sm-Co nanoparticles by cluster beam deposition

Single-crystal Sm-Co nanoparticles have been successfully produced by a cluster beam deposition technique. Particles have been deposited by DC magnetron sputtering using high Ar pressures on both single-crystal Si substrates and Au grids for the magnetic and structural/microstructural properties, respectively. Oxidation of the particles is prevented by using carbon buffer and cover layers. Nanoparticles have a uniform size distribution with an average size of 4.2, 6 and 7 nm at 1, 1.5 and 2 Torr of Ar pressure, respectively. At 1 Torr, the particles have the disordered 1:7 structure and a high coercivity of 19 kOe at 10 K. These particles show a superparamagnetic behavior with a blocking temperature of T_B = 145 K. From this value of T_B and the particle volume, the value of anisotropy constant K is estimated to be around 2.2 × 10⁷ ergs/cc. Heat is introduced to the particles during their flight to the substrate to increase the particle size. Nanoparticles of SmCo₅ with an average size of 15 nm and high room temperature coercivity have been produced. No change in magnetic and structural properties of the samples has been observed even after 10 months. Cluster beam deposition could play a key role for the production of rare earth nanoparticles for many applications.     

Superspin-glass like behavior of nanoparticle La<Subscript>0.7</Subscript>Ca<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> obtained by mechanochemical milling

Single-phase perovskite compound La_0.7Ca_0.3MnO₃ was synthesised by a high-energy ball milling in a single step processing. Structure and morphology characterizations revealed nanoparticle nature of this mixed valent manganite with the average particle diameter of 9 nm. Comprehensive set of magnetic measurements showed that the system can be described as an ensemble of interacting magnetic nanoparticles where each particle possesses high magnetic moment, i.e., superspin. Furthermore, magnetic behavior showed contributions from both superspin-glass (SSG) and superparamagnetic (SP) states, and the prevailing properties depended on the experimental conditions. It was established that SSG state dominated in low magnetic fields up to 500 Oe while in higher applied fields suppression of collective behavior occurred and individual characteristics of nanoparticles prevailed. It was also concluded that the applied method of synthesis produced system with high magnetic anisotropy as well as with the large nanoparticle shell whose thickness amounts 30% of a particle diameter.     

Size-tuneable synthesis of nickel nanoparticles

A facile method is described for synthesising nickel nanoparticles via the thermal decomposition of an organometallic precursor in the presence of excess n-trioctylphosphine as a capping ligand. For the first time, alkylamines with different chain lengths were employed as size-limiting agents in this synthesis. A direct correlation is demonstrated between the size of the alkylamine ligands used and the mean diameter of the nickel nanoparticles obtained. The use of bulky oleylamine as a size-limiting agent over a reaction period of 30 min led to the growth of nickel nanoparticles with a mean diameter of 2.8 ± 0.9 nm. The employment of less bulky N,N-dimethylhexadecylamine groups led to the growth of nickel nanoparticles with a mean diameter of 4.4 ± 0.9 nm. By increasing the reaction time from 30 to 240 min, while employing oleylamine as the size-limiting agent, the mean diameter of the nickel nanoparticles was increased from 2.8 ± 0.9 to 5.1 ± 0.7 nm. Decreasing the amount of capping ligand present in the reaction system allowed further growth of the nickel nanoparticles to 17.8 ± 1.3 nm. The size, structure and morphology of the nanoparticles synthesised were characterised by transmission electron microscopy and powder X-ray diffraction; while magnetic measurements indicated that the particles were superparamagnetic in nature.     

Silica-modified Fe-doped calcium sulfide nanoparticles for in vitro and in vivo cancer hyperthermia

In this study, sulfide-based magnetic Fe-doped CaS nanoparticles modified with a silica layer were investigated for cancer hyperthermia. A polyvinyl pyrrolidone polymer was used as the coupling agent. The developed nanoparticles contained 11.6 wt% iron concentration, and their X-ray diffraction pattern was similar to those of CaS and Fe–CaS nanoparticles. The average particle size was approximately 47.5 nm and homogeneously dispersed in aqueous solutions. The major absorption bands of silica were observed from the FTIR spectrum. The magnetic properties and heating efficiency were also examined. The specific absorption ratio of nanoparticles at a concentration of 10 mg/mL at 37 °C in an ethanol carrier fluid was 37.92 W/g, and the nanoparticles would raise the temperature to over 45 °C within 15 min. A cytotoxicity analysis revealed that the nanoparticles had good biocompatibility, which indicated that the nanoparticles did not affect cell viability. The therapeutic effects of the nanoparticles were investigated using in vitro and animal studies. Cells seeded with nanoparticles and treated under an AC magnetic field revealed a percentage of cytotoxicity (60%) that was significantly higher from that in other groups. In the animal study, during a hyperthermia period of 15 days, tumor-bearing Balb/c mice that were subcutaneously injected with nanoparticles and exposed to an AC magnetic field manifested a reduction in tumor volume. The newly developed silica-modified Fe–CaS nanoparticles can thus be considered a promising and attractive hyperthermia thermoseed.     

Magnetic properties of biomineral particles produced by bacteria <Emphasis Type="Italic">Klebsiella oxytoca</Emphasis>

Ferrihydrite nanoparticles (2–5 nm in size) produced by bacteria Klebsiella oxytoca in the course of biomineralization of iron salt solutions from a natural medium exhibit unique magnetic properties: they are characterized by both the antiferromagnetic order inherent in a bulk ferrihydrite and the spontaneous magnetic moment due to the decompensation of spins in sublattices of a nanoparticle. The magnetic susceptibility enhanced by the superantiferromagnetism effect and the magnetic moment independent of the magnetic field provide the possibility of magnetically controlling these natural objects. This has opened up the possibilities for their use in nanomedicine and bioengineering. The results obtained from measurements of the magnetic properties of the ferrihydrite produced by Klebsiella oxytoca in its two main crystalline modifications are reported, and the data obtained are analyzed theoretically. This has made it possible to determine numerical values of the magnetic parameters of real biomineral nanoparticles.     

Magnetic properties of self-assembled nanostructure films on the base of amorphous Ni granules

We report on structural and magnetic properties of granular films consisting of 2.5 nm Ni nanoparticles. The films are fabricated by the original laser electrodispersion technique, which allows producing nearly monodisperse and amorphous particles. Atomic force microscopy (AFM) study shows that in 8 nm thickness films the particles are self-assembled in clusters with the lateral size 100-150 nm and the height of about 8 nm. Performed by SQUID, the films magnetization measurements reveal superparamagnetic behaviour, characteristic for an ensemble of non-interacting single domain magnetic particulates. It is found that the magnetic moment of the particulate is equal to that of about 3000 individual Ni nanoparticles and the blocking temperature is close to room temperature. Defined from magnetic measurements, the size of single domain particulates correlates well with the size of the clusters determined from AFM images. We propose that exchange interaction plays an important role in the formation of the particulates by aligning the magnetic moments of the individual Ni nanoparticles inside the clusters. Presence of magnetic clusters with high blocking temperature makes the fabricated films potentially useful for high-density magnetic data storage applications.     

NanoSQUID as magnetic sensor for magnetic nanoparticles characterization

Integrated magnetic sensors based on niobium dc SQUID (Superconducting Quantum Interference Device) for nanoparticle characterizations are presented. The SQUIDs consists of two Dayem bridges of 90 nm × 250 nm and loop area of 4, 1, and 0.55 μm². The devices are realized by using an e-beam lithography nano-fabrication process which can directly pattern the devices in an electron-positive resist and then transferred to a 20 nm single niobium layer by a lift-off post-process. The SQUIDs were designed to have a hysteretic current–voltage characteristic in order to work as a magnetic flux-current transducer. The presence of an integrated niobium coil, tightly coupled to the SQUID, allows us to easily excite the SQUID and to flux bias the SQUID at its optimal working point. Current–voltage characteristics, critical current as a function of the external magnetic field and switching current distributions were performed at liquid helium temperature. A critical current modulation of about 20% and a current-magnetic flux transfer coefficient (responsivity) of 30 μA/Φ₀ have been obtained, resulting in a magnetic flux resolution better than 1 mΦ₀. The authors performed preliminary measurements with and without iron oxide nanoparticles on the SQUID loop in order to show the device sensitivity in view of nano-magnetism applications. It was showed that the presence of magnetic nanoparticles can be easily detected and the magnetic relaxation curve measured.     

Detection of carcinoembryonic antigen using functional magnetic and fluorescent nanoparticles in magnetic separators

We combined a sandwich immunoassay, anti-CEA/CEA/anti-CEA, with functional magnetic (~80 nm) and fluorescent (~180 nm) nanoparticles in magnetic separators to demonstrate a detection method for carcinoembryonic antigen (CEA). Determination of CEA in serum can be used in clinical diagnosis and monitoring of tumor-related diseases. The CEA concentrations in samples were deduced and determined based on the reference plot using the measured fluorescent intensity of sandwich nanoparticles from the sample. The linear range of CEA detection was from 18 ng/mL to 1.8 pg/mL. The detection limit of CEA was 1.8 pg/mL. In comparison with most other detection methods, this method had advantages of lower detection limit and wider linear range. The recovery was higher than 94%. The CEA concentrations of two serum samples were determined to be 9.0 and 55 ng/mL, which differed by 6.7% (9.6 ng/mL) and 9.1% (50 ng/mL) from the measurements of enzyme-linked immunosorbent assay (ELISA), respectively. The analysis time can be reduced to one third of ELISA. This method has good potential for other biomarker detections and biochemical applications.     

Size-dependent single electron tunneling effect in Au nanoparticles

We investigated single electron tunneling (SET) behavior of dodecanethiol-coated Au nanoparticles of two different sizes (average sizes are 5 nm and 2 nm) using nanogap electrodes, which have a well-defined gap size, at various temperatures. The Coulomb staircases and the Coulomb gap near-zero bias voltage caused by the suppression of the tunneling electrons due to the Coulomb blockade effect were observed in the current-voltage (I-V) curves of both sizes of nanoparticles at a low temperature (10 K). At room temperature, the Coulomb gap was observed only in the I-V curve of the smaller nanoparticles. This result indicates that the charging energy of the smaller nanoparticles is enough to overcome the thermal energy at room temperature. This suggests that it is possible to operate the SET devices at room temperature using the smaller nanoparticles as a Coulomb island.     

Magnetic behaviour of a magnetite/silicon nanocomposite

Mesoporous silicon is utilized to infiltrate quite monodisperse iron oxide nanoparticles into the pores. This semiconducting matrix exhibits oriented pores, clearly separated from each other, with an average pore diameter of 55 nm. Iron oxide nanoparticles of 8 nm and 5 nm in size which are coated with a surfactant are prepared by high temperature decomposition in the presence of an organic precursor. The achieved nanocomposite consists of dispersed Fe₃O₄-nanoparticles within the pores and offers magnetic properties which are determined by the morphology of the silicon matrix as well as by the distribution of the particles within the individual pores. Thus, the change of regime between a superparamagnetic and a blocked state of the system can be tuned. Furthermore, magnetic anisotropy between the two magnetization directions, normal and parallel to the sample surface, is observed due to the oriented and separated pores of the template which are quasi-regular arranged. This porous silicon/magnetite composite with its adjustable magnetic properties is also of interest for possible applications in biomedicine due to the low toxicity of both materials.     

Temperature-dependent magnetic anomalies of CuO nanoparticles

Copper oxide (CuO) nanoparticles with an average size of 25 nm were prepared by a sol-gel method. A detailed study was made of the magnetization of CuO nanoparticles using a maximum field of 60 kOe for temperatures between 8 and 300 K. Antiferromagnetic CuO nanoparticles exhibit anomalous magnetic properties, such as enhanced coercivity and magnetic moments. Significantly, the magnitude of the hysteresis component tends to weaken upon increase in temperature (>8 K). In addition, a hysteresis loop shift and coercivity enhancement are observed at 8 K in the field-cooled (FC, at 50 kOe) case. It is thought that the change in hysteresis behavior is due to the uncompensated surface spins of the CuO nanoparticles. The susceptibility (χ) plot showed that χ varied substantially at temperatures below 12 K, and this transition is due to the exchange interactions between the neighboring atoms at the nanoscale.     

Cu1.5[Cr(CN)6]⋅6.5H2O nanoparticles: synthesis, characterization, and magnetic properties

We have synthesized nanoparticles of Cu_1.5[Cr(CN)₆]⋅6.5H₂O of varying size by using poly(vinylpyrrolidone) (PVP) as a protecting polymer. The particle size variation has been achieved by varying the amount of the PVP surfactant with the reactants. The prepared nanoparticles have been investigated by using X-ray diffraction, transmission electron microscopy, and direct-current magnetization techniques. The nanoparticles crystallize in a face centred cubic structure (space group: Fm3m). The approximate particle sizes for the three samples are 18, 9, and 5 nm, respectively. Non-PVP nanoparticles (18 nm) show a magnetic ordering temperature of 65 K. A decrease in the magnetic ordering temperature was observed with decreasing particle size. These nanoparticles are magnetically very soft, showing negligibly small values of the coercivity and remanent magnetization. The maximum magnetization and spontaneous magnetization values at 5 K are found to decrease with decreasing particle size. The observed magnetization behaviour of the nanoparticles has been attributed to the increasing surface spin disorder with decreasing particle size.     

Synthesis and characterization of carbon coated nanoparticles produced by a continuous low-pressure plasma process

Core–shell nanoparticles coated with carbon have been synthesized in a single chamber using a continuous and entirely low-pressure plasma-based process. Nanoparticles are formed in an argon plasma using iron pentacarbonyl Fe(CO)₅ as a precursor. These particles are trapped in a pure argon plasma by shutting off the precursor and then coated with carbon by passing acetylene along with argon as the main background gas. Characterization of the particles was carried out using TEM for morphology, XPS for elemental composition and PPMS for magnetic properties. Iron nanoparticles obtained were a mixture of FeO and Fe₃O₄. TEM analysis shows an average size of 7–14 nm for uncoated particles and 15–24 nm for coated particles. The effect of the carbon coating on magnetic properties of the nanoparticles is studied in detail.     

Stabilization of high spin FCC Fe in (Fe/Pd)n multilayers

Polycrystalline (Fe/Pd)_n multilayers are grown onto sapphire substrates at room temperature in a UHV system. The number of periods n=40 and the thickness of Pd layers of t_Pd=4 nm are kept constant, whereas the thickness of the Fe layers is varied from 1.5 to 5 nm. Structural properties are studied by in situ reflection high energy diffraction (RHEED), scanning tunnelling microscopy (STM) and ex situ by X-ray diffraction at small angles and large angles. Analyzing the experimental data using the program SUPREX we obtain interplanar distances of d_Fe=2.03±0.01 Å for an Fe layer thickness larger than about 2.5 nm as expected for (1 1 0) planes of BCC Fe. For Fe layers with thicknesses less than about 2.5 nm the interplanar distance is d_Fe=2.1±0.01 Å, which is close to the distance between (1 1 1) planes of FCC Fe with a lattice parameter of a=3.64 Å. Magnetic susceptibility measurements at temperatures between 1.5 and 300 K for (Fe/Pd)_n multilayers with FCC Fe yield a magnetic moment per Fe atom of μ=2.7±0.1 μ_B, which is about 20% larger compared to μ=2.2 μ_B for BCC Fe. We show that the occurrence of the large magnetic moment originates from FCC Fe being in the high spin (HS) state rather than from polarization effects of Pd at Fe/Pd interfaces.     

High-magnetic-moment multifunctional nanoparticles for nanomedicine applications

Multifunctional FeCo nanoparticles with narrow size distribution (less than 8% standard deviation) were fabricated by a novel physical vapor nanoparticle-deposition technique. The size of magnetic nanoparticles was controlled in the range from 3 to 100 nm. The shape of nanoparticles was controlled to be either spherical or cubic. The particles had a high specific magnetization of 226 emu/g at low saturation field, which is much higher than the currently commercialized iron oxide nanoparticles. Core–shell-type Co(Fe)–Au nanoparticles were produced by the same technique. They combined the high moment of the Co(Fe) core with the plasmonic feature of a Au shell.