Direct electrochemistry and electrocatalysis of myoglobin based on silica-coated gold nanorods/room temperature ionic liquid/silica sol-gel composite film

A novel biosensor based on the silica-coated gold nanorods (GNRs@SiO₂) and hydrophilic room temperature ionic liquid (RTIL) 1-butyl-3-methylimidazolium tetrafluroborate ([bmim][BF₄]) was fabricated for the determination of hydrogen peroxide (H₂O₂) and nitrite. GNRs@SiO₂ can not only act as a binder to hinder [bmim][BF₄] (RTIL) leaking from the electrode surface, but also provide a favorable microenvironment for direct electrochemistry of myoglobin (Mb). A pair of well-defined and quasi-reversible redox peaks of Mb was obtained at the GNRs@SiO₂-Mb/RTIL-sol-gel composite film modified GCE (GNRs@SiO₂-Mb/RTIL-sol-gel/GCE) through direct electron transfer between Mb and the underlying electrode. This biosensor showed an excellent electrocatalytic activity towards hydrogen peroxide and nitrite. The linear range for the determination of H₂O₂ was from 0.2 to 180 μM with a detection limit of 0.12 μM based on the signal-to-noise ratio of 3. In addition, the biosensor also exhibited high selectivity, good reproducibility, and long-term stability. Therefore, this kind of composite film can provide an ideal matrix for protein immobilization and biosensor fabrication.     

Direct Electrochemistry and Electrocatalysis Behaviors of Glucose Oxidase Based on Hyaluronic Acid-Carbon Nanotubes-Ionic Liquid Composite Film

Multi‐walled carbon nanotubes (MWNTs) were dispersed in the ionic liquid [BMIM][BF₄] to form a uniform black suspension. Based on it, a novel glucose oxidase (GOx)‐hyaluronic (HA)‐[BMIM][BF₄]‐MWNTs/GCE modified electrode was fabricated. UV‐vis spectroscopy confirmed that GOx immobilized in the composite film retained its native structure. The experimental results of EIS indicated MWNTs, [BMIM][BF₄] and HA were successfully immobilized on the surface of GCE and [BMIM][BF₄]‐MWNTs could obviously improve the diffusion of ferricyanide toward the electrode surface. The experimental results of CV showed that a pair of well‐defined and quasi‐reversible peaks of GOx at the modified electrode was exhibited, and the redox reaction of GOx at the modified electrode was surface‐confined and quasi‐reversible electrochemical process. The average surface coverage of GOx and the apparent Michaelis‐Menten constant were 8.5×10⁻⁹ mol/cm² and 9.8 mmol/L, respectively. The cathodic peak current of GOx and the glucose concentration showed linear relationship in the range from 0.1 to 2.0 mmol/L with a detection limit of 0.03 mmol/L (S/N=3). As a result, the method presented here could be easily extended to immobilize and obtain the direct electrochemistry of other redox enzymes or proteins.     

Haemoglobin immobilized on nafion modified multi-walled carbon nanotubes for O2, H2O2 and CCl3COOH sensors

A conductive biocomposite film (MWCNTs-NF-Hb) containing multi-walled carbon nanotubes (MWCNTs) incorporated with entrapped haemoglobin (Hb) in nafion (NF) has been synthesized on glassy carbon electrode (GCE), gold (Au), indium tin oxide (ITO) and screen printed carbon electrode (SPCE) separately by potentiostatic methods. The presence of both MWCNTs and NF in the biocomposite film enhances the surface coverage concentration (Γ), and increases the electron transfer rate constant (K_s) to 132%. The biocomposite film exhibits a promising enhanced electrocatalytic activity towards the reduction of O₂, H₂O₂ and CCl₃COOH. The cyclic voltammetry has been used for the measurement of electrocatalysis results of analytes by means of biocomposite film-modified GCEs. The MWCNTs-NF-Hb-modified GCEs’ sensitivity values are higher than the values obtained for other film modified GCEs. The surface morphology of the biocomposite films which have been deposited on ITO has been studied using scanning electron microscopy and atomic force microscopy. The studies have revealed that there was an incorporation of NF and immobilization of Hb on MWCNTs. Finally, the flow injection analysis has been used for the amperometric studies of analytes at MWCNTs-Hb and MWCNTs-NF-Hb film modified SPCEs. The amperometric study results have shown higher slope values for MWCNTs-NF-Hb biocomposite film.     

Direct electrochemical response of Myoglobin using a room temperature ionic liquid, 1-(2-hydroxyethyl)-3-methyl imidazolium tetrafluoroborate,as supporting electrolyte

Direct electrochemical response of Myoglobin (Myb) at the basal plane graphite (BPG) electrode was observed when a room temperature ionic liquid (RTIL), 1-(2-hydroxyethyl)-3-methyl imidazolium tetrafluoroborate ([HEMIm][BF₄]), was used as the supporting electrolyte. In a 0.17 M [HEMIm]BF₄ aqueous solution, a couple of well-defined redox peaks of Myb could be obtained, whose anodic and cathodic peak potentials were at −0.158 and −0.224 V (vs. Ag/AgCl), respectively. Both anodic and cathodic peak currents increased linearly with the potential scan rate. Compared with the supporting electrolyte of phosphate buffer, [HEMIm][BF₄] played an obvious promotion for the direct electron transfer between Myb and the BPG electrode. Further investigation suggested that Myb was adsorbed tightly on the surface of the BPG electrode in the presence of [HEMIm][BF₄] to form a stable, approximate monolayer Myb film. Myb adsorbed on the BPG electrode surface showed a remarkable electrocatalytic activity for the reduction of oxygen in a [HEMIm][BF₄] aqueous solution. Based on these, a third-generation biosensor could be constructed to directly detect the concentration of oxygen in aqueous solution with a limit of detection of 2.3 × 10⁻⁸ M.     

Electrochemical property and analysis application of biosensors in miscible nonaqueous media—Room-temperature ionic liquid

Stable heme proteins entrapped in dimethylformamide (DMF)–chitosan organohydrogel films modified electrodes were operated in neat hydrophilic room-temperature ionic liquid (IL) [bmim][BF₄] for the first time. The modified electrodes possess outstanding electrochemical response in [bmim][BF₄] without adding water. The morphology studies of films were demonstrated by atomic force microscopy (AFM). UV–Vis and FTIR spectroscopy showed that the heme proteins retained their native structure in organohydrogel films. Direct electrochemistry and bioelectrocatalysis of heme protein–organohydrogel films were investigated. Several electrochemical parameters such as the charge transfer coefficients (α) and the apparent electron transfer rate constant (k_s) of these processes were calculated by performing nonlinear regression analysis of square wave voltammetry (SWV) experimental dates. Furthermore, high electrocatalytic activity to hydrogen peroxide (H₂O₂) was observed, indicating that heme proteins entrapped in organohydrogel films retained their bioelectrocatalytic activities in [bmim][BF₄]. Kinetic analysis of the cyclic voltammetry dates shows that heme protein–organohydrogel films operated in IL bring up to an enhancement of the biosensor sensitivity and a high affinity for H₂O_2.     

ARGET ATRP of acrylonitrile with ionic liquid as reaction media and 1,1,4,7,7‐pentamethyldiethylenetriamine as both ligand and reducing agent in the presence of air

[C₁₂mim][BF₄], [C₈mim][BF₄], and [C₄mim][BF₄] were first applied as reaction media for atom transfer radical polymerization using activators regenerated by electron transfer (ARGET ATRP) of acrylonitrile (AN) with 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as both ligand and reducing agent in the presence of air. The rate of polymerization in [C₁₂mim][BF₄] was considerably faster than in [C₈mim][BF₄] and [C₄mim][BF₄]. ARGET ATRP of AN in [C₁₂mim][BF₄] were better controlled than in [C₈mim][BF₄] and [C₄mim][BF₄] under the same experimental conditions. With an increase in the content of PMDETA, the polymerization provided an accelerated reaction rate and a broader polymer molecular weight distribution. A slow polymerization rate and a broad polydispersity index were observed using TMEDA instead of PMDETA as both ligand and reducing agent. There was an obvious induction period with CuCl₂ instead of CuBr₂ as catalyst. Well‐defined PAN‐b‐PMMA with higher molecular weight at 104,560 and relatively broader distribution at 1.35 was successfully prepared with PAN as macroinitiator via ARGET ATRP in [C₁₂mim][BF₄] in the presence of air. The resultant fibers were obtained with the fineness at 1.17dtex and the tenacity at 6.03cN · dtex^?1. Copyright © 2010 John Wiley & Sons, Ltd.     

A novel hydrogen peroxide sensor based on the redox of ferrocene on room temperature ionic liquid film

A novel sensor was constructed based on the catalytic activity of ferrocene (Fc) that was immobilized on a room temperature ionic liquids (RTILs), 1-ethyl-3-methyl imidazolium tetrafluoroborate ([EMIM][BF₄]), film. Electrochemical behavior of ferrocene was investigated by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). A pair of stable, well-defined and quasi-reversible redox peak of ferrocene could be obtained at pH 7.0 phosphate buffer. Further investigations reveal that both anodic and cathodic peak currents of ferrocene vary linearly with the concentration of hydrogen peroxide (H₂O₂). Based on this, a new sensor for the measurement of H₂O₂ can be fabricated facilely. This sensor allowed us to measure H₂O₂ by polarizing the electrode under ether anodic or cathodic potential with an excellent stability and anti-interfering ability.     

Direct electrochemistry and electrocatalysis of horseradish peroxidase immobilized in hyaluronic acid and single walled carbon nanotubes composite film

Direct electrochemistry and electrocatalysis of horseradish peroxidase (HRP) immobilized on a hyaluronic acid (HA)-single walled carbon nanotubes (SCNs) composite film coated glassy carbon electrode (GCE) was studied for the first time. HRP entrapped in the SCNs-HA composite film exhibited a pair of well-defined, quasi-reversible cyclic voltammetric peaks in a 0.1 M phosphate buffer solution (pH 7.0). Formal potential vs. standard calomel electrode (E°′) was −0.232 V, and E°′ was linearly dependent on the solution pH indicating that the electron transfer was proton-coupled. The current is linearly dependent on the scan rate, indicating that the direct electrochemistry of HRP in that case is a surface-controlled electrode process. UV-VIS spectrum suggested HRP retained its original conformation in the SCNs-HA film. Immobilized HRP showed excellent electrocatalysis in the reduction of hydrogen peroxide (H₂O₂).     

Direct Electrochemistry and Electrocatalysis of Hemoglobin in Lipid Film Incorporated with Room‐Temperature Ionic Liquid

A facile phospholipid/room‐temperature ionic liquid (RTIL) composite material based on dimyristoylphosphatidylcholine (DMPC) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim]PF₆) was exploited as a new matrix for immobilizing protein. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were adopted to characterize this composite film. Hemoglobin (Hb) was chosen as a model protein to investigate the composite system. UV‐vis absorbance spectra showed that Hb still maintained its heme crevice integrity in this composite film. By virtue of the Hb/DMPC/[bmim]PF₆ composite film‐modified glassy carbon electrode (GCE), a pair of well‐defined redox peaks of Hb was obtained through the direct electron transfer between protein and underlying GCE. Moreover, the reduction of O₂ and H₂O₂ at the Hb/DMPC/[bmim]PF₆ composite film‐modified GCE was dramatically enhanced.     

Myoglobin/arylhydroxylamine film modified electrode: Direct electrochemistry and electrochemical catalysis

The adsorption processes and electrochemical behavior of 4-nitroaniline (4-NA) adsorbed onto glassy carbon electrodes (GCE) have been investigated in aqueous 0.1 M nitric acid (HNO₃) electrolyte solutions using cyclic voltammetry (CV). 4-NA adsorbs onto GCE surfaces, and upon potential cycling past −0.2 V, is transformed into the arylhydroxylamine (ArHA) derivative which exhibits a well-behaved pH dependent redox couple centered at 0.32 V at pH 1.5. It is noted as arylhydroxylamine modified glassy carbon electrodes (HAGCE). This modified electrode can be readily used as an immobilization matrix to entrap proteins and enzymes. In our studies, myoglobin (Mb) was used as a model protein for investigation. A pair of well-defined reversible redox peaks of Mb (Fe(III)-Fe(II)) was obtained at the Mb/arylhydroxylamine modified glassy carbon electrode (Mb/HAGC) by direct electron transfer between the protein and the GCE. The formal potential (E^0′), the apparent coverage (Γ^*) and the electron-transfer rate constant (k_s) were calculated as −0.317 V, 8.26 × 10⁻¹² mol/cm² and 51 ± 5 s⁻¹, respectively. Dramatically enhanced biocatalytic activity was exemplified at the Mb/HAGC electrode by the reduction of hydrogen peroxide (H₂O₂), trichloroacetic acid (TCA) and oxygen (O₂). The Mb/arylhydroxylamine film was also characterized by UV-visible spectroscopy (UV-vis), scanning electron microscope (SEM) indicating excellent stability and good biocompatibility of the protein in the arylhydroxylamine modified electrode. This new Mb/HAGC electrode exhibited rapid electrochemical response (2 s) for H₂O₂ and had good stability in physiological condition, showing the potential applicability of the films in the preparation of third generation biosensors or bioreactors based on direct electrochemistry of the proteins.     

Direct electrochemistry and electrocatalysis of horseradish peroxidase immobilized in Nafion-RTIL composite film

The composite film based on Nafion and hydrophobic room-temperature ionic liquid (RTIL) 1-butyl-3-methyl-imidazolium hexafluorophosphate ([bmim] PF₆) was explored. Here, Nafion was used as a binder to form Nafion-ionic liquids composite film and help [bmim] PF₆ effectively adhered on glassy carbon (GC) electrode. X-ray photoelectron spectroscopy (XPS), cyclic voltammtery (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize this composite film, showing that the composite film can effectively adhere on the GC electrode surface through Nafion interacting with [bmim] PF₆ and GC electrode. Meanwhile, doping [bmim] PF₆ in Nafion can also effectively reduce the electron transfer resistance of Nafion. The composite film can be readily used as an immobilization matrix to entrap horseradish peroxidase (HRP). A pair of well-defined redox peaks of HRP was obtained at the HRP/Nafion-[bmim] PF₆ composite film-modified GC electrode through direct electron transfer between the protein and the underlying electrode. HRP can still retain its biological activity and enhance electrochemical reduction towards O₂ and H₂O₂. It is expected that this composite film may find more potential applications in biosensors and biocatalysis.     

Direct Electrochemistry and Electrocatalysis of Myoglobin with Ionic Liquid through Multilayers Film on Carbon Ionic Liquid Electrode

Multilayers of myoglobin (Mb) with ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([EMIM]BF₄) was assembled on carbon ionic liquid electrode (CILE) based on the electrostatic attraction between the negatively charged Mb and the positively charged imidazolium ion of IL. The CILE was fabricated with 1‐ethyl‐3‐methylimidazolium ethylsulfate ([EMIM]EtOSO₃) as the modifier, which exhibited imidazolium ion on the electrode surface. Then Mb molecules were assembled on the surface of CILE step‐by‐step to get a {IL/Mb}_n multilayer film modified electrode. UV‐Vis adsorption and FT‐IR spectra indicated that Mb remained its native structure in the IL matrix. In deaerated phosphate buffer solution (pH 7.0) a pair of well‐defined quasi‐reversible redox peaks appeared with the apparent formal potential (E^0′) as ‐0.212 V (vs. SCE), which was the characteristic of Mb heme Fe(III)/Fe(II) redox couples. The results indicated that the direct electron transfer of Mb was realized on the modified electrode. The {IL/Mb}_n/CILE displayed excellent electrocatalytic ability to the trichloroacetic acid reduction in the concentration range from 2.0 to 22.0 mmol/L with the detection limit of 0.6 mmol/L (3σ). The proposed method provides a new platform to fabricate the third generation biosensor based on the self‐assembly of redox protein with ILs.     

Direct electrochemistry and electrocatalysis of myoglobin using an ionic liquid-modified carbon paste electrode coated with Co3O4 nanorods and gold nanoparticles

A nanohybrid biomaterial was fabricated by mixing Co₃O₄ nanorods, gold nanoparticles (Au-NPs) and myoglobin (Mb), and depositing it on the surface of a carbon paste electrode containing the ionic liquid N-hexylpyridinium hexafluorophosphate as the binder. UV–vis and FT-IR revealed the Mb in the composite film to have remained in its native structure. A pair of well-defined redox peaks appears in cyclic voltammograms and indicates direct electron transfer from the Mb to the underlying electrode. The results are attributed to the favorable orientation of Mb in the composite film, to the synergistic effects of Co₃O₄ nanorods and Au-NPs. The modified electrode shows excellent electrocatalytic ability towards the reduction of substrates such as trichloroacetic acid and nitrite, and displays good stability and reproducibility.

Direct electrochemical response of cytochrome c on a room temperature ionic liquid,N-butylpyridinium tetrafluoroborate,modified electrode

Cytochrome c (Cyt c) and a room temperature ionic liquid (RTIL), 2-methyl-N-butylpyridinium tetrafluoroborate ([2-MBPy][BF₄]), were immobilized on the surface of a basal plane graphite (BPG) electrode. Direct electron transfer from Cyt c to BPG electrode was clearly observed. A pair of well-defined and reversible redox peaks could be obtained in a 0.13 M [2-MBPy][BF₄] aqueous solution. The anodic and cathodic peak potentials of Cyt c were at −0.064 and −0.020 V (vs. Ag/AgCl), respectively. The results showed that [2-MBPy][BF₄] promoted the direct electron transfer between Cyt c and the BPG electrode. Cyt c immobilized on BPGE can catalyze the reduction of hydrogen peroxide. Based on this, a biosensor can be constructed to detect quantitatively hydrogen peroxide.     

Preparation of the glucose sensor based on three-dimensional ordered macroporous gold film and room temperature ionic liquid

A novel type of glucose sensor was fabricated based on a glucose oxidase (GOD)-N,N-dimethtylformamide (DMF)-[BMIm][BF₄] composites modified three-dimensional ordered macroporous (3DOM) gold film electrode. The immobilized GOD exhibits a pair of well-defined reversible peaks in 50 mM pH 7.0 phosphate buffer solutions (PBS), which could be attributed to the redox of flavin adenine dinucleotide (FAD) in GOD. The research results show that ionic liquid ([BMIm][BF₄]), DMF and 3DOM gold film are crucial for GOD to exhibit a pair of stable and reversible peaks. It is believed that the large active area of 3DOM gold film can increase the amount of immobilized GOD. Simultaneously, the application of IL enhances the stability of GOD and facilitates the electron transfer between GOD and the electrode. The synergetic effect of DMF can help the GOD to maintain its bioactivity better. GOD immobilized on the electrode exhibits the favorable electrocatalytic property to glucose, and the prepared sensor has a linear range from 10 to 125 nM with a detection limit of 3.3 nM at a signal-to-noise ratio of 3σ. The apparent K _m (Michaelis- Menten constant) for the enzymatic reaction is 0.018 mM.     

The thermochemistry of solvation of imidazolium-based ionic liquids in benzene

ABSTRACT

The present work is devoted to the thermochemical study of solvation of ionic liquids (IL) in benzene. The solution enthalpies of 1-ethyl-3-methylimidazolium tricyanomethanide [EMIM][C(CN)₃], 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-hexyl-3-methylimidazolium hexafluorophosphate [HMIM][PF₆], 1-octyl-3-methylimidazolium tetrafluoroborate [OMIM][BF₄], 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf₂] and 1-butyl-3-methylimidazolium trifluoromethanesulfonate [BMIM][TfO] in benzene were measured. The solvation enthalpies of imidazolium-based IL were calculated. Molar refractions of imidazolium-based IL form literature data on density and refractive indexes of IL were also calculated. The linear correlation between solvation enthalpy and molar refraction of IL was observed. This correlation can be used to calculate the vaporization enthalpy of imidazolium-based IL from solution calorimetry data.     

Synthesis and application of a chiral ionic liquid functionalized β‐cyclodextrin as a chiral selector in capillary electrophoresis

A novel chiral ionic liquid functionalized β‐cyclodextrin, 6‐O‐2‐hydroxpropyltrimethylammonium‐β‐cyclodextrin tetrafluoroborate ([HPTMA‐β‐CD][BF₄]), was synthesized and used as a chiral selector in capillary electrophoresis. [HPTMA‐β‐CD][BF₄] not only increased the solubility in aqueous buffer in comparison with the parent compound, but also provided a stable reversal electroosmotic flow, and the enantioseparation of eight chiral drugs was examined in phosphate buffer containing [HPTMA‐β‐CD][BF₄] as the chiral selector. The effects of the [HPTMA‐β‐CD][BF₄] concentration and the background electrolyte pH were studied. Moreover, the chiral separation abilities of β‐CD and [HPTMA‐β‐CD][BF₄] were compared and possible mechanisms for the chiral recognition of [HPTMA‐β‐CD][BF₄] are discussed. Copyright © 2013 John Wiley & Sons, Ltd.     

离子液体型表面活性剂研究

以1-甲基咪唑为原料, 制备了6个常规离子液体: 1-正丁基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[bmim][BF₄]及[bmim][PF₆])、1-正己基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[hmim][BF₄]及[hmim][PF₆])、1-正十六烷基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[C₁₆mim][BF₄]及[C₁₆mim][PF₆])和4个功能化离子液体: 1-(2-羟乙基)-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[2-hemim][BF₄]及[2-hemim][PF₆])、1-乙氧羰基甲基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[eocmmim][BF₄]及[eocmmim][PF₆]). 研究了这两类离子液体的一些物理性能, 旨在挖掘离子液体在香料香精化妆品工业中的应用价值. 分别检测了它们与一般溶剂的互溶性, 并测定了它们的表面张力和发泡性能, 实验结果表明, 仅[C₁₆mim][BF₄]和[C₁₆mim][PF₆]具有发泡性能, 发泡力分别为68和120 mm.     

Reverse ATRP process of acrylonitrile in the presence of ionic liquids

An ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([C₄mim] [BF₄]), was first used as the solvent in azobisisobutyronitrile (AIBN)‐initiated reverse atom transfer radical polymerization (RATRP) of acrylonitrile with FeCl₃/succinic acid (SA) as the catalyst system. The polymerization in [C₄mim][BF₄] proceeded in a well‐controlled manner as evidenced by kinetic studies. Compared with the polymerization in bulk, the polymerization in [C₄mim][BF₄] not only showed the best control of molecular weight and its distribution but also provided rather rapid reaction rate with the ratio of [C₄mim][BF₄] at 200:1:2:4. The polymerization apparent activation energies in [C₄mim][BF₄] and bulk were calculated to be 48.2 and 55.7 kJ mol^?1, respectively. Polyacrylonitrile obtained was successfully used as a macroinitiator to proceed the chain extension polymerization in [C₄mim][BF₄] via a conventional ATRP process. [C₄mim][BF₄] and the catalyst system could be easily recycled and reused after simple purification and had no effect on the living nature of polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2701–2707, 2008     

Ionothermal synthesis and characterization of two new heteropolytungstates with 1-ethyl-3-methylimidazolium bromide ionic liquid as solvent

In this article, we have synthesized two new heteropolytungstate-based compounds [EMIM]₄[SiW₁₂O₄₀] (1) and [EMIM]₆[P₂W₁₈O₆₂] · 4H₂O (2) using the ionic liquid (IL) [EMIM]Br (EMIM = 1-ethyl-3-methylimidazolium) as a solvent and characterized them by infrared (IR) and ultraviolet (UV) spectra, thermogravimetric (TG) and elemental analyses, electrochemistry, and single-crystal X-ray analyses. Compound 1 is constructed from one [SiW₁₂O₄₀]^4? and four [EMIM]⁺. In the structure, [SiW₁₂O₄₀]^4? and [EMIM]⁺ are connected by hydrogen bonds with the surface oxygens of the polyoxoanion to form a 3-D supramolecular framework. The heteropolyanion of 2 is a classical Dawson-type structure [P₂W₁₈O₆₂]^6? and connected with six cations through hydrogen bonds. The structures of these two heteropolyanions are consistent with those synthesized by traditional methods, indicating that ionothermal synthesis is an effective method for the preparation of heteropolyoxometalates. The photocatalytic properties of these compounds have also been investigated.