含缺陷半无限长梁在阶跃载荷作用下的塑性动力特性及失效分析

分析了在任意位置含一缺陷的半无限长梁在自由端受阶跃载荷作用下的刚塑性动力响应,重点讨论了结构响应模式和缺陷处的能量耗散,给出了不同载荷大小和缺陷参数组合下的完全解,所得结果对确定管道结构的动态失效准则有参考价值.     

自由梁受集中质量两点撞击的刚塑性动力响应

对矩形截面自由梁在两端同时受到完全相同的集中质量横向撞击问题进行了理论上的研究 ,通过采用刚塑性的材料模型得到了其动力响应完全解。结合数值方法给出了梁的瞬态变形 ,并讨论了输入能量、质量比等参数对梁的最终变形、能量耗散的影响。针对典型算例将完全解的结果与MSC/Dytran的计算结果进行了比较 ,两者具有合理的近似 ,但理论预测的结果略高估计了梁的最终变形。     

冲击载荷下软钢梁早期响应的数值模拟和简化模型

冲击载荷作用下，梁的早期响应既有弹性变形也有塑性变形，两者相互耦合．有限元数值模拟的结果表明，弹性弯曲波的传播是梁早期变形的主要机制，刚塑性简化理论预言的初始阶段中梁的“移行塑性铰”实际上是不存在的．本文提出的弹性 理想塑性简化模型可以很好地模拟固支软钢梁的早期响应     

含稳定缺陷的简支梁在均布强动载荷作用下的刚塑性响应

本文分析了中间截面含缺陷的轴向可移简支梁在均布阶跃、脉冲和冲击载荷作用下的刚塑性动力响应,给出了整个响应过程封闭形式的完全解,讨论了耗散能量分配与缺陷参数的关系.本文的结果对确定结构的动态失效准则是有重要参考价值的.     

Post-failure response of impulsively loaded clamped beams

This paper analyses the response of a clamped rigid, perfectly plastic beam subjected to an impulsive velocity loading throughout the span. A critical velocity is determined using a damage mechanics model, beyond which a beam fails at the supports. Attention is focused on the dynamics of the beam after failure. A transient phase of deformation develops after failure and leads to a change of the beam geometry after failure. Other parameters such as the residual kinetic energy and rigid body velocity are also determined. A comparison is made between the clamped case here studied and the simply supported one described elsewhere by the authors.     

Dynamic response of a rigid plastic simply supported imperfect beam subjected to a uniform intense dynamic loading

This paper proposes a theoretical analysis for the dynamic response of a rigid perfectly plastic simply supported beam with an imperfection in the midspan cross-section under uniform step, pulse, and impulsive loading when support is assumed to be free to move inward. The complete solutions for an entire dynamic response process are given and the relationship between the distribution of energy dissipated at plastic hinges and the parameter of imperfection is also discussed.     

自由梁中部在平头子弹横向正冲击下的穿透及变形

研究了均匀矩形截面自由梁中部在小尺寸、平头、刚性、圆柱形弹体正撞击下的变形及穿透过程。当子弹冲击速度接近或高于临界穿透速度时 ,在梁上与子弹接触区的周围会形成一个剪切冲塞 ,子弹通过冲塞作用在梁上的剪应力会引起梁的整体弯曲变形。通过动力分析 ,确定了子弹穿透梁的临界穿透速度。对子弹穿透梁的局部剪切过程和梁的各个变形阶段进行了数值计算 ,估算出局部剪切能、梁弯曲变形能、子弹及梁的残余动能在子弹初动能中所占的比例。     

The dynamic plastic response characteristics of circular beam

In this paper the problem of a circular beam subjected to radial impact by a rigid mass at its tip in its own plane is investigated on the basis of rigid-perfectly plastic assumption. The analytical solution of the particle velocities is obtained as the function of travelling plastic hinge location. By analysing the solution, some special properties of circular beam problem are found.     

Dynamic response of elastic-plastic ideal sandwich beams

The dynamic response of elastic-plastic ideal sandwich beams is investigated. The plastic deformation is interpreted as a kind of general loads in the elastic beams, while the moving interfaces between elastic and plastic regions are treated as external restraint conditions. Particularly, the dynamic response of a cantilever beam is investigated using the classical method by means of the superposition of the vibration modes of elastic beams. The numerical results show that, compared with the rigid plastic solutions, the dynamic behavior of elastoplastic beam exhibits complex response modes. In some cases, elastic deformation has very important effects on the response mode of the beam, so it should not be ignored.     

Impulsive Loading of an Ideal Fiber-Reinforced Rigid-Plastic Beam

Abstract

This article examines the dynamic plastic response of an impulsively loaded ideal fiber-reinforced (strongly anisotropic) rigid-plastic beam. It is demonstrated that the response duration and permanent transverse displacements are significantly less than the corresponding quantities in an “equivalent” rigid perfectly plastic isotropic beam.     

A Numerical Procedure for the Dynamic Plastic Response of Beams with Rotatory Inertia and Transverse Shear Effects

ABSTRACT

A numerical procedure is used to examine the influence of transverse shear forces in the yield criterion and rotatory inertia on the dynamic plastic response of beams. Various results are presented for a long beam impacted by a mass and a simply supported beam loaded impulsively, both of which are made from a rigid perfectly plastic material with yielding controlled by the Ilyushin-Shapiro ield criterion.

Transverse shear effects lead to a dramatic reduction in the slopes of the deformed profiles for both beam problems. Moreover, the slope of the deformed profile underneath the striker in the impact problem is quite sensitive to the actual shape of a yield curve, while the maximum transverse displacement is less sensitive. The retention of rotatory inertia in the basic equations leads to further reductions up to 17 and 10% in the slopes and maximum transverse displacements, respectively.     

计及热应变的空间曲梁的刚-柔耦合动力学

研究带中心刚体的作大范围运动的空间曲梁的刚-柔耦合动力学.结合混合坐标法和绝对坐标法的特点,取与中心刚体大范围运动有关的变量和柔性梁各单元节点相对中心刚体连体基的位移和斜率作为广义坐标,建立了一种新的柔性梁的刚柔耦合模型.基于精确的应变和位移的关系式,根据Jourdian速度变分原理,建立了带中心刚体柔性曲梁的有限元离散的动力学方程.数值对比了空间曲梁系统和空间直梁系统的刚柔耦合动力学性质,用能量守恒规律验证了文中曲梁模型的合理性.在此基础上,在应变能中计及热应变,研究温度增高引起的曲梁的热膨胀对系统的动力学性态的影响.     

端部受斜撞击作用悬臂梁的弹塑性动力响应模式

基于大变形动力控制方程并利用有限差分离散分析,研究了斜撞击作用下弹塑性悬臂梁的动力响应．通过对屈服函数以及弯矩、轴力在动力响应过程中分布规律的分析,阐明了斜撞击下恳臂梁的弹塑性动力响应模式和斜撞击的轴向分量对变形机制的影响．研究表明,弹塑性响应过程可划分为四个阶段,对应的变形模式为：“压缩塑性区扩展”模式,“广义移行塑性铰”和“压缩塑性区收缩”混合模式,“驻定塑性铰”模式,“弹性自由振动”模式．与刚塑性分析所假定的两相变形模式比较,弹塑性应响分析证实了响应早期的瞬态轴向压缩模式和梁根部“驻定塑性铰”模式的存在性,肯定了刚塑性分析所假定变形模式的主要特征．斜撞击的轴向分量在撞击发生的瞬时主导了梁的变形,使梁呈现同承受横向冲击明显小同的变形规律．随着响应的深入,轴向分量迅速衰减,其对截面屈服的贡献非常微弱,由横向分量引起的弯曲挠动在大部分时间内主导和控制梁的变形．数值计算结果表明,斜撞击载荷的质量、撞击速度和角度是影响梁动力响应的重要因素．     

基于双折线抗力模型的空爆荷载梁式构件振动位移研究

为研究双折线抗力模型对空爆荷载梁式构件振动位移的影响,提出了柔性、刚性两类梁式构件正向弹塑性振动及回弹阶段弹塑性振动的分析法。应用等效单自由度法建立了各阶段振动方程并依据不同的初始条件推导出了各阶段的理论解。采用此理论解和代表性塑性强化系数,开展了双折线抗力模型中不同塑性强化程度对两类梁式构件正向弹塑性振动及回弹阶段弹塑性振动位移的典型工况验证。研究结果表明:基于双折线抗力模型位移理论解的适用范围更广;随着双折线抗力模型塑性强化系数的增大,两类梁式构件的最大弹塑性位移、残余变形均逐渐减小,且残余变形降低程度高于最大弹塑性位移;塑性强化系数增大到一定程度,梁式构件回弹阶段将出现塑性振动位移,进一步降低残余变形,无塑性回弹位移的理想弹塑性抗力模型会高估空爆荷载下梁式构件的残余变形。     

A Comment on the Low Speed Impact of a Clamped Beam by a Heavy Striker∗

ABSTRACT

An approximate theoretical analysis is presented for a rigid, perfectly plastic clamped beam struck transversely at the mid-span by a mass which produces Finite transverse displacements. An alternative quasi-static procedure is proposed for estimating the dynamic plastic response of a beam when struck by a heavy mass that travels at a low speed. The theoretical basis of this method is explained and the accuracy is examined by an error analysis. Finally, it is suggested that this quasi-static procedure could be used for estimating the dynamic plastic response of other structures that are struck by a heavy mass traveling at a low speed,     

Shear and Bending Response of a Rigid-Plastic Beam to Partly Distributed Blast-Type Loading

ABSTRACT

A study is undertaken on dynamic response of a simply supported rigid perfectly plastic beam that is subjected to partly distributed blast-type pressure loading. The beam material has finite shear strength and obeys a square yield criterion relating bending moment and transverse shear force. The transverse dynamic load is uniformly and symmetrically distributed over a middle portion of the span. Various patterns of deformation, which combine plastic bending and shear sliding, are obtained for a wide range of parameters, and the effects of transverse shear forces and time dependence of the dynamic pressure are examined.     

含切口悬臂梁的大变形塑性冲击动力响应

本文分析了含切口的悬臂梁受飞射物撞击的刚塑性动力响应的完全解,推导了考虑几何大变形效应的“双铰模式”的动力学方程,给出了计算方法和计算结果,最后讨论了耗散能的分配和切口对梁最终变形的影响。     

On optimal design of rigid plastic beams with additional supports in the case of impulsive loading

A rigid plastic beam under implusive loading is considered. In order to increase the stiffness of the beam, some additional supports are applied. The locations of these supports must be selected so as to minimize the maximal permanent deflection of the beam. This problem is solved with the aid of the optimal control theory of distributed parameter systems. Optimality conditions are deduced. The case where the problem is self-conjugate is examined. An example is given.     

Research note on evaluation of the plastic deformation of beams under transverse impact

The permanent deformation of a rigid perfectly plastic beam subjected to a time-dependent line load is calculated. The beam has finite length, and the load is applied transversely in the middle of the span. At the initial time, the load is zero. Thereafter, the load has a triangular time dependence. For sufficiently large values of the peak load, static and moving plastic hinges appear, and the beam is subjected to plastic bending. Previous studies of this problem have provided a numerical solution of a system of approximate equations. In this article, a numerical solution of the system of exact equations is provided. The numerical results represent a significant improvement over those that were previously available.     

自由圆柱壳体在侧向非对称脉冲载荷下的塑性破坏

将壳体作为理想刚塑性材料，给出了两端自由金属圆柱薄壳体承受侧向非对称脉冲载荷下的变形和运动方程。针对矩形脉冲载荷，给出能量损耗分析。极高载情况下，２／３的外部输入能量转化为塑性功，其余的用于壳体的刚体运动。针对复杂结构的自由圆柱壳，能量法用于分析其破坏。理论预测与实验结果吻合较好。