Temperature and concentration dependent viscosity and gelation temperature of ABA triblock copolymer solutions

In solutions of ABA-triblock copolymers in a poor solvent for A thermoreversible gelation can occur. A three-dimensional dynamic network may form and, given the polymer and the solvent, its structure will depend on temperature and polymer mass fraction. The zero-shear rate viscosity of solutions of the triblock-copolymer polystyrene-polyisoprene-polystyrene in n-tetradecane was measured as a function of temperature and polymer mass fraction, and analyzed; the polystyrene blocks contained about 100 monomers, the polyisoprene blocks about 2000 monomers. Empirically, in the viscosity at constant mass fraction plotted versus inverse temperature, two contributions could be discerned; one contribution dominating at high and the other one dominating at low temperatures. In a comparison with theory, the contribution dominating at low temperatures was identified with the Lodge transient network viscosity; some questions remain to be answered, however. An earlier proposal for defining the gelation temperature T _gel is specified for the systems considered, and leads to a gelation curve; T _gel as a function of polymer mass fraction.Mathematical symbols {} functional dependence; e.g., f{x} means f is a function of x - p _log logarithm to the base number p; e.g., ¹⁰log is the common logarithm - exp exponential function with base number e - sin trigonometric sine function - lim limit operation - – in integral sign: Cauchy Principal Value of integral, e.g., - derivative to x - partial derivative to x Latin symbols dimensionless constant - b constant with dimension of absolute temperature - constant with dimension of absolute temperature - B dimensionless constant - c mass fraction - dimensionless constant - constant with dimension of absolute temperature - d ^* dimensionless constant - D{0} constant with dimension of absolute temperature - e base number of natural (or Naperian) logarithm - g distribution function of inverse relaxation times - G relaxation strength relaxation function - h distribution function of relaxation times reaction constant enthalpy of a molecule - H Heaviside unit step function - i complex number defined by i ² = –1 - j{0} constant with dimension of viscosity - j index number - k Boltzmann's constant - k _H Huggins' coefficient - m mass of a molecule - n number - N number - p index number - s entropy of a molecule - t time - T absolute temperature Greek symbols as index: type of polymer molecule - as index: type of polymer molecule - shear as index: type of polymer molecule - shear rate - small variation; e.g. T is a small variation in T relative deviation Dirac delta distribution as index: type of polymer molecule - difference; e.g. is a difference in chemical potential - constant with dimension of absolute temperature - (complex) viscosity - constant with dimension of viscosity - [] intrinsic viscosity number - inverse of relaxation time - chemical potential - number pi; circle circumference divided by its diameter - mass per unit volume - relaxation time shear stress - angular frequency     

Evaluation of the dynamic-mechanical properties of solids from a cooperative model for stress relaxation

For many solid materials the stress relaxation process obeys the universal relationF = – (d/d lnt)_max = (0.1 ± 0.01) ( ₀ — _i ), regardless of the structure of the material. Here denotes the stress,t the time, ₀ the initial stress of the experiment and _i the internal stress. A cooperative model accounting for the similarity in relaxation behaviour between different materials was developed earlier. Since this model has a spectral character, the concepts of linear viscoelasticity are used here to evaluate the corresponding prediction of the dynamic mechanical properties, i.e. the frequency dependence of the storageE () and lossE () moduli. Useful numerical approximations ofE () andE () are also evaluated. It is noted that the universal relation in stress relaxation had a counterpart in the frequency dependence ofE (). The theoretical prediction of the loss factor for high-density polyethylene is compared with experimental results. The agreement is good.     

Zum Mischen rheologisch inhomogener Stoffsysteme auf Einschneckenmaschinen

Zusammenfassung Das Mischen von Stoffen mit unterschiedlichen rheologischen Eigenschaften in Schneckenmaschinen ist in der Kunststoffauf- und -verarbeitung eine Standardaufgabe. Trotzdem gibt es hierfür kein zufriedenstellendes mathematisch-physikalisches Modell. Daher werden zunächst einfache Mischmodelle diskutiert. Auf der Basis dieser Modelle wird dann unter Berücksichtigung der Besonderheiten des Plastifizierextruderprozesses eine Mischgütebeziehung mathematisch formuliert. Die experimentelle Überprüfung erfolgt mit Hilfe der Grauwertanalyse extrudierter Zweistoffsysteme, bei denen ein Stoff mit Ruß eingefärbt war. Da der Mischprozeß hochgradig stochastisch ist, streuen die Meßergebnisse. Unter Berücksichtigung dieses Tatbestandes ist der theoretische Ansatz zufriedenstellend.

---

Mixing of polymer resins with different rheological properties is a usual demand in plastics processing using screw extruders. A mathematical model describing this processing problem sufficiently is not known, however. Therefore, simple mixing models will be discussed. Based on these, a concept for the calculation of mixing homogeneity will be presented, including the particular requirement of the plasticating screw process. An experimental investigation utilizes the grey-value analysis of extruded two-component materials, which in one phase is carbon-black filled. Considering the fact that the mixing process is highly random, the theoretical model leads to a good level of aggreement with the scattering measurement data.

---

b Schneckenkanalbreite - B Bandbreite der Grauwerte - c Konstante - mittlere Konzentration, bezogen auf die Grauwertbandbreite - h Höhe, Gangtiefe, Schneckenkanalhöhe - h ₀ Gangtiefe der Einzugszone - h ₁ Gangtiefe der Ausstoßzone - L Länge - gemittelte Schmelzebettlänge - n Exponent des Potenzfließgesetzes - s Standardabweichung der Grauwerte bezogen auf die Grauwertbandbreite - S Standardabweichung der Grauwerte - t Verweilzeit - t ₁ kürzeste Verweilzeit - mittlere Verweilzeit - ₀ Umfangsgeschwindigkeit - mittlere Geschwindigkeit - V Volumenstrom - w Dicke eines Kontrollelements - w Ausstreichdicke eines Kontrollelements - x Koordinate - Mittelwert der Grauwerte - y Koordinate - Scherdeformationswinkel - Scherdeformation - mittlere Scherdeformation - Schergeschwindigkeit - Viskosität - ₁ dimensionslose kürzeste Verweilzeit - dimensionsloser Volumenstrom - _LSM laminarer Schermischgrad - _{LSM, the} theoretischer laminarer Schermischgrad - _{LSM, exp} experimenteller laminarer Schermischgrad - ² Varianz der Verweilzeit im Schmelzebett - Schubspannung - Gangsteigungswinkel der Schnecke - ø Volumenanteil - dimensionslose Kennzahl     

Fractal-time stochastic processes and dynamic functions of polymeric systems

Dynamic material functions of polymeric systems are calculated via a defect-diffusion model. The random motion of defects is modelled by a fractaltime stochastic process. It is shown that the dynamic functions of polymeric solutions can be approximated by the defect-diffusion process of the mixed type. The relaxation modulus of Kohlrausch type is obtained for a fractal-time defect-diffusion process, and it is shown that this modulus is capable of portraying the dynamic behavior of typical viscoelastic solutions.The Fourier transforms of the Kohlrausch function are calculated to obtain and. A three-parameter model for and is compared with the previous calculations. Experimental measurements for five polymer solutions are compared with model predictions. D rate of deformation tensor - G(t) mechanical relaxation modulus - H relaxation spectrum - I(t) flux of defects - P _n (s) probability of finding a walker ats aftern-steps - P generating function ofP _n (s) - s(t) fraction of surviving defects - , () gamma function (incomplete) - ₀ zero shear viscosity - ^* () complex viscosity - frequency - t _n n-th moment - F[] Fourier transform - f ^* (u) Laplace transform off(t) - , components of ^* - G _f, _f ^* fractional model - G ₃, ₃ ^* three parameter model - complex conjugate ofz - material time derivative ofD     

Influence of the formation of associations of macromolecules on the rheo-optical properties of their dilute solutions. I. Theory

Assuming the formation of doublets in the flow according to a mass action law, the shear rate and the concentration dependence of the extinction angle, of the birefringence, and of the average coil expansion are calculated for dilute solutions of flexible macromolecules. It is shown that this reversible association process has a strong influence on the measurable parameters in a flow birefringence experiment. c concentration (g/cm³) - h ² mean square end-to-end distance at shear rate - h ₀ ² mean-square end-to-end distance at zero-shear rate - n refractive index of the solution (not very different from the solvent for a very dilute solution) - E mean coil expansion - K ₀,K constant of the mass action law - M molecular weight - R _G gas constant - T absolute temperature - ₁ – ₂ optical anisotropy of the segment - ₀ Deborah number: - Deborah number: - shear rate - ₀, reduced concentration - _s viscosity of the solvent - [] ₀ intrinsic viscosity at zero-shear rate - [] intrinsic viscosity at shear rate - extinction angle - N _a Avodagro's number - _n magnitude of the birefringence     

Rheological characteristics of glass-fibre-filled polypropylene melts

The rheological properties of glass fibre-filled polypropylene melts have been investigated. A high pressure capillary rheometer has been used for the experimental study. The effect of shear rate, temperature, and fibre concentration on the melt viscosity and viscoelastic properties have been studied. An equation has been proposed to correlate the melt viscosity with shear rate, temperature and fibre content. A master curve relation on this basis has been brought out using the shift factora _T . a _T shift factor (=/ _r ) - A _i coefficients of the polynomical of eq. (1) (i = 0, 1, 2, ,n) - B constant in the AFE equation (eq. (2)) (Pa s) - B constant in eq. (3) - D extrudate diameter - d capillary diameter - activation energy at constant shear rate (kcal/mole) - E activation energy at constant shear stress (kcal/mole) - T melt temperature (K) - X fraction glass fibre by weight - shear rate (s^–1) - shear viscosity (Pa s) - normal stress coefficient (Pa s²) - ₁ – ₂ first normal-stress difference (Pa) - shear stress (Pa) - r at reference temperature     

Response of an elastic Bingham fluid to oscillatory shear

The response of an elastic Bingham fluid to oscillatory strain has been modeled and compared with experiments on an oil-in-water emulsion. The newly developed model includes elastic solid deformation below the yield stress (or strain), and Newtonian flow above the yield stress. In sinusoidal oscillatory deformations at low strain amplitudes the stress response is sinusoidal and in phase with the strain. At large strain amplitudes, above the yield stress, the stress response is non-linear and is out of phase with strain because of the storage and release of elastic recoverable strain. In oscillatory deformation between parallel disks the non-uniform strain in the radial direction causes the location of the yield surface to move in-and-out during each oscillation. The radial location of the yield surface is calculated and the resulting torque on the stationary disk is determined. Torque waveforms are calculated for various strains and frequencies and compared to experiments on a model oil-in-water emulsion. Model parameters are evaluated independently: the elastic modulus of the emulsion is determined from data at low strains, the yield strain is determined from the phase shift between torque and strain, and the Bingham viscosity is determined from the frequency dependence of the torque at high strains. Using these parameters the torque waveforms are predicted quantitatively for all strains and frequencies. In accord with the model predictions the phase shift is found to depend on strain but to be independent of frequency.Notation A plate strain amplitude (parallel plates) - A _R plate strain amplitude at disk edge (parallel disks) - G elastic modulus - m torque (parallel disks) - M normalized torque (parallel disks) = 2m/R ³₀ - N ratio of viscous to elastic stresses (parallel plates) =µ A/ ₀ ratio of viscous to elastic stresses (parallel disks) =µ A _R/₀ - r normalized radial position (parallel disks) =r/R - r radial position (parallel disks) - R disk radius (parallel disks) - t normalized time = t — /2 - t time - _E elastic strain - _P plate strain (displacement of top plate or disk divided by distance between plates or disks) - _PR plate strain at disk edge (parallel disks) - ₀ yield strain - _E normalized elastic strain = _E/₀ - _P normalized plate strain = _P/₀ - _PR normalized plate strain at disk edge (parallel disks) = _PR/₀ - ₀ normalized plate strain amplitude (parallel plates) =A/ ₀ — normalized plate strain amplitude at disk edge (parallel disks) =A _R/₀ - phase shift between _P andT (parallel plates) — phase shift between _PR andM (parallel disks) - µ Bingham viscosity - stress - ₀ yield stress - T normalized stress =/ ₀ - frequency     

Determination of discrete relaxation and retardation time spectra from dynamic mechanical data

A powerful but still easy to use technique is proposed for the processing and analysis of dynamic mechanical data. The experimentally determined dynamic moduli,G() andG(), are converted into a discrete relaxation modulusG(t) and a discrete creep complianceJ(t). The discrete spectra are valid in a time window which corresponds to the frequency window of the input data. A nonlinear regression simultaneously adjust the parametersg _i , _i ,i = 1,2, N, of the discrete spectrum to obtain a best fit ofG, G, and it was found to be essential that bothg _i and _i are freely adjustable. The number of relaxation times,N, adjusts during the iterative calculations depending on the needs for avoiding ill-posedness and for improved fit. The solution is insensitive to the choice of initial valuesg _i,0, _i,0,N ₀. The numerical program was calibrated with the gel equation which gives analytical expressions both in the time and the frequency domain. The sensitivity of the solution was tested with model data which, by definition, are free of experimental error. From the relaxation time spectrum, a corresponding discrete set of parametersJ ₀,, J _d,i and _i of the creep complianceJ(t) can then readily be calculated using the Laplace transform.This paper is dedicated to Professor Hanswalter Giesekus on the occasion of his retirement as Editor of Rheologica Acta.     

Representation of the rheological properties of polymer melts in terms of complex fluidity

In dynamic rheological experiments melt behavior is usually expressed in terms of complex viscosity ^* () or complex modulusG ^* (). In contrast, we attempted to use the complex fluidity ^* () = 1/µ ^* () to represent this behavior. The main interest is to simplify the complex-plane diagram and to simplify the determination of fundamental parameters such as the Newtonian viscosity or the parameter of relaxation-time distribution when a Cole-Cole type distribution can be applied. ^* () complex shear viscosity - () real part of the complex viscosity - () imaginary part of the complex viscosity - G ^* () complex shear modulus - G() storage modulus in shear - G() loss modulus in shear - J ^* () complex shear compliance - J() storage compliance in shear - J() loss compliance in shear - shear strain - rate of strain - angular frequency (rad/s) - shear stress - loss angle - ^* () complex shear fluidity - () real part of the complex fluidity - () imaginary part of the complex fluidity - ₀ zero-viscosity - ₀ average relaxation time - h parameter of relaxation-time distribution     

Viscous heating correction for thermally developing flows in slit die viscometry

In the thermally developing region, d _yy /dx| _y=h varies along the flow direction x, where _yy denotes the component of stress normal to the y-plane; y = ±h at the die walls. A finite element method for two-dimensional Newtonian flow in a parallel slit was used to obtain an equation relating d _yy /dx/ _y=h and the wall shear stress ₀ at the inlet; isothermal slit walls were used for the calculation and the inlet liquid temperature T₀ was assumed to be equal to the wall temperature. For a temperature-viscosity relation /₀ = [1+(T–T₀]^–1, a simple expression [(hd _yy /dx/ _y=h )/ _w0] = 1–[1-F _c(Na)] [M()+P(Pr) ·Q(Gz ^–1)] was found to hold over the practical range of parameters involved, where Na, Gz, and Pr denote the Nahme-Griffith number, Graetz number, and Prandtl number; is a dimensionless variable which depends on Na and Gz. An order-of-magnitude analysis for momentum and energy equations supports the validity of this expression. The function F _c(Na) was obtained from an analytical solution for thermally developed flow; F _c(Na) = 1 for isothermal flow. M(), P(Pr), and Q(Gz) were obtained by fitting numerical results with simple equations. The wall shear rate at the inlet can be calculated from the flow rate Q using the isothermal equation.Notation x,y Cartesian coordinates (Fig. 2) - , dimensionless spatial variables [Eq. (16)] - dimensionless variable, : = Gz(x)^–1 - dimensionless variable [Eq. (28)] - t,t ^* time, dimensionless time [Eq. (16)] - , velocity vector, dimensionless velocity vector - _x , velocity in x-direction, dimensionless velocity - _y , velocity in y-direction, dimensionless velocity - V average velocity in x-direction - _yy , ^* normal stress on y-planes, dimensionless normal stress - shear stress on y-planes acting in x-direction - _w , _w ^* value of shear stress stress at the wall, dimensionless wall shear stress - _w0, _w0 ^* wall shear stress at the inlet, dimensionless variable - , ^* rate-of-strain tensor, dimensionless tensor - wall shear rate, wall shear rate at the inlet - Q flow rate - T, T ₀, temperature, temperature at the wall and at the inlet, dimensionless temperature - h, w half the die height, width of the die - l,L the distance between the inlet and the slot region, total die length - T ₂, T ₃, T ₄ pressure transducers in the High Shear Rate Viscometer (HSRV) (Fig. 1) - P, P2, P3 pressure, liquid pressures applied to T ₂ and T ₃ - , ₀, ^* viscosity, viscosity at T = T ₀, dimensionless viscosity - viscosity-temperature coefficient [Eq. (8)] - k thermal conductivity - C _p specific heat at constant pressure - Re Reynolds number - Na Nahme-Griffith number - Gz Graetz number - Pr Prandtl number     

Evaluating Herschel-Bulkley fluids with the back extrusion (annular pumping) technique

A mathematical model was developed to describe the behavior of Herschel-Bulkley fluids in a back extrusion (annular pumping) device. A technique was also developed to determine the rheological properties (yield stress, flow behavior index, and consistency coefficient) of these fluids. Mathematical terms were expressed in four dimensionless terms, and graphical aids and tables were prepared to facilitate the handling of the expressions.Nomenclature a radius of the plunger, m - dv/dr shear rate, s^–1 - F force applied to the plunger, N - F _b buoyancy force, N - F _cb force corrected for buoyancy, N - F _T recorded force just before the plunger is stopped, N - F _Te recorded force after the plunger is stopped, N - g acceleration due to gravity, m/s² - H(t) momentary height between plunger and container bottom, m - K a/R, dimensionless - L length of annular region, m - L(t) depth of plunger penetration, m - n flow behavior index, dimensionless - p static pressure, Pa - P _L pressure in excess of hydrostatic pressure at the plunger base, Pa - p ₀ pressure at entrance to annulus, Pa - P pressure drop per unit of length, Pa/m - Q total volumetric flow rate through the annulus, m³/s - r radial coordinate, measured from common axis of cylinder forming annulus, m - R radius of outer cylinder of annulus, m - s reciprocal of n, dimensionless - t time, s - T dimensionless shear stress, defined in Eq. (3) - T ₀ dimensionless yield stress, defined in Eq. (4) - T _w dimensionless shear stress at the plunger wall - _p velocity of plunger, m/s - velocity, m/s - mass density of fluid, kg/m³ - Newtonian viscosity, Pa s - P p ₀ –p _L , Pa - consistency coefficient, Pa sⁿ - value of where shear stress is zero - _–, ₊ limits of the plug flow region (Fig. 1) - r/R - shear stress, Pa - _y yield stress, Pa - _w shear stress at the plunger wall, Pa - dimensionless flow rate defined in Eq. (24) - dimensionless velocity defined by Eq. (5) - _–, ₊ dimensionless velocity outside the plug flow region - _max dimensionless maximum velocity in the plug flow region - _p dimensionless velocity at the plunger wall     

On some nearly viscometric flows of viscoelastic liquids

Superposition of oscillatory shear imposed from the boundary and through pressure gradient oscillations and simple shear is investigated. The integral fluid with fading memory shows flow enhancement effects due to the nonlinear structure. Closed-form expressions for the change in the mass transport rate are given at the lowest significant order in the perturbation algorithm. The elasticity of the liquid plays as important a role in determining the enhancement as does the shear dependent viscosity. Coupling of shear thinning and elasticity may produce sharp increases in the flow rate. The interaction of oscillatory shear components may generate a steady flow, either longitudinal or orthogonal, resulting in increases in flow rates akin to resonance, and due to frequency cancellation, even in the absence of a mean gradient. An algorithm to determine the constitutive functions of the integral fluid of order three is outlined.Nomenclature A _n Rivlin-Ericksen tensor of order . - A _k Non-oscillatory component of the first order linear viscoelastic oscillatory velocity field induced by the kth wave in the pressure gradient - d Half the gap between the plates - e _x, e _z Unit vectors in the longitudinal and orthogonal directions, respectively - G(s) Relaxation modulus - G History of the deformation - Stress response functional - I() Enhancement defined as the ratio of the frequency dependent part of the discharge to the frequencyindependent part of it at the third order - I ^*() Enhancement defined as the ratio of the increase in discharge due to oscillations to the total discharge without the oscillations - k Power index in the relaxation modulus G(s) - k _i ^–1 Relaxation times in the Maxwell representation of the quadratic shear relaxation modulus (s ₁, s ₂) - m _i ^–1, n _i ^–1 Relaxation times in the Maxwell representations of the constitutive functions ₁(s ₁,s ₂,s ₃) and ₄ (s ₁, s ₂,s ₃), respectively - P Constant longitudinal pressure gradient - p Pressure field - _mx ,⁽³⁾ _nz ,⁽³⁾ Mean volume transport rates at the third order in the longitudinal and orthogonal directions, respectively - ₀,⁽³⁾, ₁,⁽³⁾ Frequency independent and dependent volume transport rates, respectively, at the third order - s = t- Difference between present and past times t and      

The theory of a vibrating-rod densimeter

The paper presents a theory of a device for the accurate determination of the density of fluids over a wide range of thermodynamic states. The instrument is based upon the measurement of the characteristics of the resonance of a circular section tube, or rod, performing steady, transverse oscillations in the fluid. The theory developed accounts for the fluid motion external to the rod as well as the mechanical motion of the rod and is valid over a defined range of conditions. A complete set of working equations and corrections is obtained for the instrument which, together with the limits of the validity of the theory, prescribe the parameters of a practical design capable of high accuracy.Nomenclature A, B, C, D constants in equation (60) - A _j , B _j constants in equation (18) - a _j ⁺ , a _j ^– wavenumbers given by equation (19) - C _f drag coefficient defined in equation (64) - C _f ^/0 , C _f ^/1 components of C _f in series expansion in powers of - c speed of sound - D _b drag force of fluid b - D ₀ coefficient of internal damping - E extensional modulus - force per unit length - F _j ⁺ , F _j ^– constants in equation (24) - f, g functions of defined in equations (56) - G modulus of rigidity - I second moment of area - K constant in equation (90) - k, k constants defined in equations (9) - L half-length of oscillator - Ma Mach number - m _a mass per unit length of fluid a - m _b added mass per unit length of fluid b - m _s mass per unit length of solid - n _j eigenvalue defined in equation (17) - P power (energy per cycle) - P _a , P _b power in fluids a and b - p pressure - R radius of rod or outer radius of tube - R _c radius of container - R _i inner radius of tube - r radial coordinate - T tension - T _visc temperature rise due to heat generation by viscous dissipation - t time - v _r , v radial and angular velocity components - y lateral displacement - z axial coordinate - dimensionless tension - _a dimensionless mass of fluid a - _b dimensionless added mass of fluid b - _b dimensionless drag of fluid b - dimensionless parameter associated with - ₀ dimensionless coefficient of internal damping - dimensionless half-width of resonance curve - dimensionless frequency difference defined in equation (87) - spatial resolution of amplitude - R, , , _s , increments in R, , , _s , - dimensionless amplitude of oscillation - dimensionless axial coordinate - ratio of to - _a , _b ratios of to for fluids a and b - angular coordinate - parameter arising from distortion of initially plane cross-sections - _f thermal conductivity of fluid - dimensionless parameter associated with - viscosity of fluid - _a , _b viscosity of fluids a and b - dimensionless displacement - _j jth component of - density of fluid - _a , _b density of fluids a and b - _s density of tube or rod material - density of fluid calculated on assumption that * - dimensionless radial coordinate - * dimensionless radius of container - dimensionless times - _{rr rr}, _r radial normal and shear stress components - spatial component of defined in equation (13) - _j jth component of - dimensionless streamfunction - ⁰, ¹ components of in series expansion in powers of - phase angle - _r phase difference - _ra , _rb phase difference for fluids a and b - streamfunction - _j jth component defined in equation (22) - dimensionless frequency (based on ) - _a , _b dimensionless frequency in fluids a and b - _s dimensionless frequency (based on _s ) - angular frequency - ₀ resonant frequency in absence of fluid and internal damping - _r resonant frequency in absence of internal fluid - _ra , _rb resonant frequencies in fluids a and b - dimensionless frequency - dimensionless frequency when _a vanishes - dimensionless frequencies when _a vanishes in fluids a and b - dimensionless resonant frequency when _a , _b, _b and ₀ vanish - dimensionless resonant frequency when _a , _b and _b vanish - dimensionless resonant frequency when _b and _b vanish - dimensionless frequencies at which amplitude is half that at resonance     

Driven torsion pendulum for measuring the complex shear modulus in a steady shear flow

To investigate the viscoelastic behavior of fluid dispersions under steady shear flow conditions, an apparatus for parallel superimposed oscillations has been constructed which consists of a rotating cup containing the liquid under investigation in which a torsional pendulum is immersed. By measuring the resonance frequency and bandwidth of the resonator in both liquid and in air, the frequency and steady-shear-rate-dependent complex shear modulus can be obtained. By exchange of the resonator lumps it is possible to use the instrument at four different frequencies: 85, 284, 740, and 2440 Hz while the steady shear rate can be varied from 1 to 55 s^–1. After treatment of the theoretical background, design, and measuring procedure, the calibration with a number of Newtonian liquids is described and the accuracy of the instrument is discussed.Notation a radius of the lump - A geometrical constant - b inner radius of the sample holder - c constant - C ₁, C ₂ apparatus constants - D damping of the pendulum - e _x , e _y , e _z Cartesian basis - e _r , e , e _z orthonormal cylindrical basis - E geometrical constant - E _t , ⁰ E _t , _t relative strain tensor - f function of shear rate - F _t relative deformation tensor - G (t) memory function - G ^* complex shear modulus - G Re(G ^* ) - G Im(G ^* ) - h distance between plates - H ^* transfer function - , functional - i imaginary unit: i ²= – 1 - I moment of inertia - J _exc excitation current - J ₀ amplitude of J _exc - k ^* = k – ik complex wave number - K torsional constant - K fourth order tensor - l length of the lump - L mutual inductance - M _dr driving torque - M _liq torque exerted by the liquid - ⁰ M _liq, _liq steady state and dynamic part of Mliq - n power of the shear rate - p isotropic pressure - Q quality factor - r radial position - R,R ₀, R _c Re(Z ^*, Z ₀ ^* , Z _c ^* ) - s time - t, t time - T temperature - T, ⁰ T, stress tensor - u velocity - U lock-in output - ₀ velocity - V _det detector output voltage - V _sig, V _cr signal and cross-talk part of V _det - x Cartesian coordinate - X , X ₀, X _c Im(Z ^*, Z ₀ ^* , Z _c ^* ) - y Cartesian coordinate - z Cartesian coordinate, axial position     

Comparison between uniaxial and biaxial elongational flow behavior of viscoelastic fluids as predicted by differential constitutive equations

Behavior of polymer melts in biaxial as well as uniaxial elongational flow is studied based on the predictions of three constitutive models (Leonov, Giesekus, and Larson) with single relaxation mode. Transient elongational viscosities in both flows are calculated for three constitutive models, and steady-state elongational viscosities are obtained as functions of strain rates for the Giesekus and the Larson models.Change of elongational flow behavior with adjustable parameter is investigated in each model. Steady-state viscosities _E and _B are obtained for the Leonov model only when the strain-hardening parameter is smaller than the critical value _cr determined in each flow. In this model, uniaxial elongational viscosity _E increases with increasing strain rate , while biaxial elongational viscosity _B decreases with increasing biaxial strain rate _B . The Giesekus model predictions depend on the anisotropy parameter . _E and _B increase with strain rates for small _B while they decrease for large . When is 0.5, _E in increasing, but _B is decreasing. The Larson model predicts strain-softening behavior for both flows when the chain-contraction parameter > 0.5. On the other hand, when is small, the steady-state viscosities of this model show distinct maximum around = _B = 1.0 with relaxation time . The maximum is more prominent in _E than in _B .     

Peristaltic pumping of a second-order fluid in a planar channel

The peristaltic motion of a non-Newtonian fluid represented by the constitutive equation for a second-order fluid was studied for the case of a planar channel with harmonically undulating extensible walls. A perturbation series for the parameter ( half-width of channel/wave length) obtained explicit terms of 0(²), 0(²Re²) and 0(₁Re²) respectively representing curvature, inertia and the non-Newtonian character of the fluid. Numerical computations were performed and compared to the perturbation analysis in order to determine the range of validity of the terms.Presented at the second conference Recent Developments in Structured Continua, May 23–25, 1990, in Sherbrooke, Québec, Canada     

The steady shear viscosity of filled polymeric liquids described by a linear superposition of two relaxation mechanisms

Filled polymeric liquids often exhibit apparent yielding and shear thinning in steady shear flow. Yielding results from non-hydrodynamic particle—particle interactions, while shear thinning results from the non-Newtonian behavior of the polymer melt. A simple equation, based on the linear superposition of two relaxation mechanisms, is proposed to describe the viscosity of filled polymer melts over a wide range of shear rates and filler volume fraction.The viscosity is written as the sum of two generalized Newtonian liquid models. The resulting equation can describe a wide range of shear-thinning viscosity curves, and a hierarchy of equations is obtained by simplifying the general case. Some of the parameters in the equation can be related to the properties of the unfilled liquid and the solid volume fraction. One adjustable parameter, a yield stress, is necessary to describe the viscosity at low rates where non-hydrodynamic particle—particle interaction dominate. At high shear rates, where particle—particle interactions are dominated by interparticle hydrodynamics, no adjustable parameters are necessary. A single equation describes both the high and low shear rate regimes. Predictions of the equation closely fit published viscosity data of filled polymer melts. n power-law index - n ₁,n ₂ power-law index of first (second) term - shear rate - steady shear viscosity - ₀ zero-shear rate viscosity - _{0, 1}, _{0, 2} zero-shear rate viscosity of first (second) term - time constant - ₁, ₂ time constant of first (second) term - µ _r relative viscosity of filled Newtonian liquid - ₀ yield stress - ø solid volume fraction - ø _m maximum solid volume fraction     

Measurements of slip at the wall during flow of high-density polyethylene through a rectangular conduit

A hot-film probe has been used to measure slip of high-density polyethylene flowing through a conduit with a rectangular cross section. A transition from no slip to a stick-slip condition has been observed and associated with irregular extrudate shape. Appreciable extrudate roughness was initiated at the same flow rate as that at which the relationship between Nusselt number and Péclet number for heat transfer from the probe departed from the behavior expected for a no-slip condition at the conduit wall. A ₁ constant defined by eq. (A3) - C dimensionless group used in eq. (7) - C _p heat capacity - D constant in eq. (13) - f u _s/u - f _lin defined by eq. (A6) - G storage modulus - G loss modulus - k thermal conductivity - L length of hot film in thex-direction - L _eff effective length of large probe found from eq. (A3) - Nu _L Nusselt number, defined for a lengthL by eq. (2) - (Nu _L)₀ value ofNu _L atPe = 0 (eq. (A 1)) - Pe Péclet number,uL/ - Pe ₀ Péclet number in slip flow, eq. (6) - Pe ₁ Péclet number in shear flow, eq. (4) - q _L average heat flux over hot film of lengthL - R _i resistances defined by figure 8 - R _AB correlation coefficient defined by eq. (14) for signalsA andB - T temperature - T _s temperature of probe surface - T ambient temperature - T T _s –T - u average velocity - u _s slip velocity - V _b voltage indicated in figure 8 - W probe dimension (figure 6) - x distance in flow direction (figure 1) - y distance perpendicular to flow direction (figure 1) - thermal diffusivity,k/C _p - wall shear rate - _5% thickness of lubricating layer during probe calibration for introduction of an error no greater than 5%; see Appendix I - ^* complex viscosity - density - time - _c critical shear stress, eq. (13) - _w wall shear stress - frequency characterizing extrudate distortion (figures 12 and 13), or frequency of oscillation during rheometric characterization (figures 18–20) - * quantity obtained from normalized Nusselt number, eq. (A1), or complex viscosity ^* - A actual (small) probe (see Appendix I) - M model (large) probe (see Appendix I)     

Rheological models for gypsum plaster pastes

Shear stress and shear rate data obtained for gypsum plaster pastes were correlated by means of different rheological models. The pastes were prepared from a commercial calcium sulfate hemihydrate at various water/plaster ratios ranging from 100/150 to 100/190. The tests were performed at 25°C using a rotating coaxial cylinder viscosimeter. The measurements were accomplished by applying a step-wise decreasing shear rate sequence. Discrimination among the models was made: (1) on the basis of the fitting goodness; (2) by checking the physical meaning of the calculated parameters; (3) on the basis of the stability of the parameters and of their prediction capacity beyond the limits of the experimental data. In the light of above, the Casson model seemed to be most effective for application to gypsum plaster pastes. K Consistency - n Power-law index - N Number of experimental data - P Number of parameters - Shear rate (s^–1) - ₀ Viscosity (Pa · s) - _d Dispersing medium viscosity (Pa · s) - _p Plastic viscosity (Pa · s) - Viscosity at zero shear rate (Pa · s) - Viscosity at infinite shear rate (Pa · s) - [] Intrinsic viscosity - ² Variance - Shear stress (Pa) - ₀ Yield stress (Pa) - Solid volume fraction - _m Maximum solid volume fraction     

Analyse und Berechnung der Strömungsvorgänge im zylindrischen Scherspalt von Plastifizieraggregaten

Zusammenfassung Dieser Aufsatz zeigt eine Möglichkeit auf, zylindrische Scherteile einer Plastifiziereinheit, auf der strukturviskose Materialien verarbeitet werden, approximativ zu berechnen. Es ist möglich, den Volumenstrom und Druckabfall, die mittlere Schergeschwindigkeit, Scherdeformation und Schubspannung im Scherspalt zu approximieren. Durch diese Gleichungen wird eine Abschätzung der Verteil- und Zerteilvorgänge im Scherelement möglich.

---

A method is described for approximating the flow in cylindrical shearing gaps of plasticating extruder, which is applicable to shear thinning materials. It is possible to calculate the through-put and pressure drop as well as the shear rate, strain and shear stress in the gap. With these equations the distribution and separation process in shearing gaps can be evaluated.

---

D Zylinderdurchmesser - d ₁ Schnecken-Kerndurchmesser der Meteringzone - d _s Durchmesser des zylindrischen Scherteils - K Konstante im Potenzfließgesetz - K _0T Koeffizient des Potenzfließgesetzes - L ₁ Länge der Anlaufschräge - L _s Länge des zylindrischen Scherteils - n Fließindex - n ₀ Drehzahl - p Druckabfall über der Scherteillänge - s Scherspalthöhe - T _M Massetemperatur - ₀ Umfangsgeschwindigkeit - _0x Geschwindigkeitskomponente inx-Richtung - _x, _z Geschwindigkeit inx- bzw.z-Richtung als Funktion der Koordinatey - Volumenstrom - x, z Ortskoordinaten - Exponent des Potenzfließgesetzes - Schergeschwindigkeit - mittlere Schergeschwindigkeit - Viskosität - dimensionslose Höhe - Dichte der Schmelze - Schubspannung - _yx, _yz Schubspannungskomponenten - _xx, _zz Normalspannungskomponenten - _ps dimensionsloser Druckgradient - dimensionsloser Volumenstrom - _x, _z dimensionslose Geschwindigkeit inx- bzw.z-Richtung