Self-intensification in shock wave and vortex interaction

Computer simulation has been performed for the interaction between a shock wave and a vortex ring moving toward the wave. The computed density contours are compared with the pattern of shadowgraphs. A remarkable property found in the simulation is that, during the passage of the shock wave over the vortex ring, the part of the wave propagating through the inside of the ring-vortex is intensified spontaneously at a localized region. Maximum pressure occurs inside the vortex and attains a high value, about several times that of the impinging shock for incident Mach numbers of around 1.2 with the vortex translation Mach number 0.60. This is due to a double-step mechanism of intensification within the flow field by the shock-vortex interaction.     

脉冲激光等离子体与正激波相互作用的PIV实验研究

脉冲激光等离子体与超声速流场相互作用在飞行器减阻隔热、点火助燃等方面具有重要的应用价值.纹影实验方法只能定性或半定量地反映流动状态.为定量研究速度分布和旋涡结构,针对激光等离子体及其与正激波相互作用过程开展粒子图像测速PIV实验研究.在激波管实验平台上建立了纳秒脉冲激光能量沉积系统和PIV测量系统,通过定量测量,探明了激光等离子体引致的激光空气泡以及热核的流动特性,揭示了激光等离子体在正激波冲击下的流动特性与演化规律,并给出了激光能量大小和位置对相互作用过程的影响.结果表明:激光空气泡内的速度分布在激光入射方向上并不关于击穿点对称,而是在靠近激光入射方向一侧的流速略大于远离激光入射方向一侧;斜压导致热核在演化初期产生涡环,后期则由剪切主导;正激波与激光空气泡界面、热核界面相互作用时,产生斜压涡量,当激光能量为87.8 mJ、正激波马赫数1.4时,热核在正激波作用下产生的涡量比在静止空气中演化时大1个数量级;激光与正激波相互作用的关键过程是热核在正激波冲击下演化成涡环,在激波波前注入激光能量能够获得更加显著的涡环.     

Computation of shock wave diffraction at a ninety degrees convex edge

This paper presents a numerical study of shock wave diffraction at a sharp ninety degrees edge, using an explicit second-order Godunov-type Euler scheme based upon the solution of a generalized Riemann problem (GRP). The Euler computations produce flow separation very close to the diffraction edge, leading to a realistic development of the separated shear layer and subsequent vortex roll-up. The diffracted shock wave, and the secondary shock wave, are both reproduced well. In addition a pair of vortex shocks are shown to form, extending well into the vortex core.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1990.     

激波绕射碰撞加速诱导爆轰的数值模拟

基于单步化学反应的Euler方程和对激波(爆轰波)、接触间断具有良好捕捉效果的Roe/HLL混合格式以及自适应网格技术,模拟了激波在方形管中与方块障碍物相互作用,并发生绕射碰撞来诱导爆轰的过程.结果表明,弱激波在绕经方块时,形成上、下绕射激波并在方块尾部发生碰撞,生成局部高温高压点,可加快爆轰的形成;而当管内阻塞比超过...     

Some aspects of streamwise vortex behavior during oblique shock wave/vortex interaction

An experimental study of the flowfield generated by the interaction of a streamwise vortex having a strong wake-type axial Mach number profile and a two-dimensional oblique shock wave was conducted in a Mach 2.49 flow. The experiments were aimed at investigating the dynamics of supersonic vortex distortion and to study downstream behavior of a streamwise vortex during a strong shock wave/vortex encounter. The experiments involved positioning an oblique shock generator in the form of a two-dimensional wedge downstream of a semi-span, vortex generator wing section so that the wing-tip vortex interacted with the otherwise planar oblique shock wave. Planar laser sheet visualizations of the flowfield indicated an expansion of the vortex core in crossing a spherically blunt-nose shock front. The maximum vortex core diameter occurred at a distance of 12.7 mm downstream of the wedge leading edge where the vortex had a core diameter of more than double its undisturbed value. At distances further downstream the vortex core diameter remained nearly constant, while it appeared to become more diffused at distances far from the wedge leading edge. Measurements of vortex trajectory revealed that the vortex convected in the freestream direction immediately downstream of the bulged-forward shock structure, while it traveled parallel to the wedge surface at distances further downstream. The turbulent distorted vortex structure which formed as a result of the interaction, was found to be sensitive to downstream disturbances in a manner consistent with incompressible vortex breakdown. Physical arguments are presented to relate behavior of streamwise vortices during oblique and normal shock wave interactions. Received 7 September 1996 / Accepted 10 February 1998     

Experimental investigation of a twice-shocked spherical gas inhomogeneity with particle image velocimetry

Results are presented from an experimental investigation into the interaction of a planar shock wave with a vortex ring. A free-falling spherical soap bubble is traversed by the incident shock wave and develops into a vortex ring as a result of baroclinically deposited vorticity (?r×?p 1 0{\nabla\rho\times\nabla p \neq 0}). The vortex ring translates with a velocity relative to the particle velocity behind the shock wave due to circulation. After the shock wave reflects from the tube end wall, it traverses the vortex ring (this process is called “reshock”) and deposits additional vorticity. Planar Mie scattering is used to visualize the atomized soap film at high frame rates (up to 10,000 fps). Particle image velocimetry (PIV) was performed for an argon bubble in nitrogen accelerated by a M = 1.35 shock wave. Circulation was determined from the PIV velocity field and found to agree well with Kelvin’s vortex ring model.     

Visualization of compressible vortex rings using the background-oriented schlieren method

In this article, we attempt to validate flow visualization using the high-speed background-oriented schlieren (HiBOS) method, which is the BOS technique combined with a high-speed video camera as the recording device in the experiment. The method has been applied to shock-induced flow near the open end of a shock tube. Three incident shock Mach numbers were examined so that the BOS measurements could be compared with results given in the literature of particle-image velocimetry (PIV) measurements. Using the HiBOS technique, we were able to clearly view developing, compressible vortex rings and diffracted shock waves discharged from the open end of the shock tube. From the BOS images, we extracted the history of the propagation velocity, the diameter of the vortex ring, and the diameter of the vortex core, all of which agree with the corresponding PIV values reported in the literature.     

Inviscid vortex structures in the shock layers of conical flows around V wings

The applicability of the criteria of existence of inviscid vortex structures (vortex Ferri singularities) is studied in the case in which a contact discontinuity of the corresponding intensity proceeds from the branching point of the λ shock wave configuration accompanying turbulent boundary layer separation under the action of an inner shock incident on the leeward wing panel. The calculated and experimental data are analyzed, in particular, those obtained using the special shadow technique developed for visualizing supersonic conical streams in nonsymmetric, Mach number 3 flow around a wing with zero sweep of the leading edges and the vee angle of 2π /3. The applicability of the criteria of existence of inviscid vortex structures is established for contact discontinuities generated by the λ shock wave configuration accompanying turbulent boundary layer separation realized under the action of a shock wave incident on the leeward wing panel. Thus, it is established that the formation of the vortex Ferri singularities in a shock layer is independent of the reason for the existence of the contact discontinuity and depends only on its intensity.     

Acoustic emission from interaction of a vortex ring with a sphere

Acoustic waves emitted by a vortex ring interacting with a fixed solid sphere are studied experimentally and theoretically. The experiments are carried out for two kindsof vortex-sphere arrangement: (A) a vortex ring passes over the sphere, and (B) a vortex ring passes by the sphere. The vortex motion is examined optically by means of a photosensor system, and the pressure signals of the emitted wave are detected by 1/2-inch microphones in the far field. In case A, the measured diameter of the vortex ring after passing the sphere increases from its initial diameter. The observed acoustic wave is dominated mainly by a dipole emission, and some contribution from a quadrupole radiation is present. In case B, the emitted wave is characterized by a rotating dipole emission in which the dipole axis rotates as the vortex position changes relative to the sphere.     

Characterization of the PVC phenomena in the exhaust of a cyclone dust separator

A laboratory scale cyclone dust separator with swirl numbers varying from 3.043 to 1.790 was used to examine the effects of different downstream pipework configurations, flowrates and swirl numbers upon the size, shape, and position of the precessing vortex core. Also examined was the effect the precessing vortex core had on the reverse flow zone, and the relationship between the two. It was concluded that the reverse flow zone displaced the central vortex core to create the precessing vortex core. The reverse flow zone would then provide feedback for the precessing vortex core, and precess around the central axis about 30 degrees behind the precessing vortex core (P.V.C). The size and position of the P.V.C was effected by changes in Reynolds number, and any additions of downstream systems to the cyclone would also affect the strength of the P.V.C. The P.V.C would squeeze and accelerate the flow through a constriction set up between the outer limits of the core and of the exit diameter wall. Spiral engulfment vortices were produced on the outside of the flow and served as the initial entrainment mechanism for external flow. The authors wish to acknowledge the financial assistance provided by British Petroleum for this research. P. Yazdabadi acknowledges the award of a SERC Total Technology studentship.     

Effect of Partial Closure of the Channel on the Pressure Pulse in a Shock Wave Emerging from a Duct

The temporal-spatial development of the flow pattern behind a shock wave emerging from open-ended and half-closed ducts at M₀=1.15 to 3.0 Mach number is investigated both experimentally and numerically and the action of the diffracted wave on a barrier placed at different distances from the duct exit is studied. Flow toeplerograms are obtained and the pressure on the barrier is measured. The distinctive features of the interaction between the shock wave and a barrier mounted perpendicular to the duct axis are established. It is found that partial closing of the duct results in a decrease in the barrier pressure in the case of a strong shock (M₀ > 2.2) and leads to a pressure decrease when a weak shock is diffracted (M₀=1.1 to 1.7). A dependence characterizing the dynamic action of the shock wave on the barrier and specifying the threshold value of a combination of the shock Mach number and the distance from the barrier determining whether the pressure pulse on the barrier increases or decreases, is obtained.     

Explosive-driven shock wave and vortex ring interaction with a propane flame

Experiments were performed to analyze the interaction of an explosively driven shock wave and a propane flame. A 30 g explosive charge was detonated at one end of a 3-m-long, 0.6-m-diameter shock tube to produce a shock wave which propagated into the atmosphere. A propane flame source was positioned at various locations outside of the shock tube to investigate the effect of different strength shock waves. High-speed retroreflective shadowgraph imaging visualized the shock wave motion and flame response, while a synchronized color camera imaged the flame directly. The explosively driven shock tube was shown to produce a repeatable shock wave and vortex ring. Digital streak images show the shock wave and vortex ring propagation and expansion. The shadowgrams show that the shock wave extinguishes the propane flame by pushing it off of the fuel source. Even a weak shock wave was found to be capable of extinguishing the flame.     

环形激波聚焦流场特性的数值研究

针对环形激波聚焦过程产生的高温、高压特性,采用间断有限元方法模拟了环形激波在同轴圆柱形激波管内的聚焦流场特性。计算结果表明,采用间断有限元方法能够有效地捕捉激波聚焦过程形成的二次激波、涡环、三波交点和球面双马赫反射等主要流动特征。此外,通过改变环形管道内外半径对聚焦流场进行模拟发现,环形管道外径对中心轴线上聚焦峰值压力的大小和位置影响较小,环形管道内径对中心轴线上聚焦峰值压力的大小和位置影响较大。计算结果可以为工程应用提供一定的理论指导。     

Formation and evolution of vortex rings induced by interactions between shock waves and a low-density bubble

The deformation and instability of a low-density spherical bubble induced by an incident and its reflected shock waves are studied by using the large eddy simulation method. The computational model is firstly validated by experimental results from the literature and is further used to examine the effect of incident shock wave strength on the formations and three-dimensional evolutions of the vortex rings. For the weak shock wave case (Ma?=?1.24), the baroclinic effect induced by the reflected shock wave is the key mechanism for the formation of new vortex rings. The vortex rings not only move due to the self-induced effect and the flow field velocity, but also generate azimuthal instability due to the pressure disturbance. For the strong shock wave case (Ma?=?2.2), a boundary layer is formed adjacent to the end wall owing to the approach of vortex ring, and unsteady separation of the boundary layer near the wall results in the ejection and formation of new vortex rings. These vortex rings interact in the vicinity of the end wall and finally collapse to a complicated vortex structure via azimuthal instability. For both shock wave strength cases, the evolutions of vortex rings due to the instability lead to the formation of the complicated structure dominated by the small-scale streamwise vortices.     

An experimental study of a vortex ring interacting with an inclined wall

An experimental study has been made on the interaction of a vortex ring with a plane solid boundary which is inclined to the axis of the ring. Dye visualizations of the ring during the interaction revealed (i) the formation of bi-helical vortex lines around the circumferential axis of the ring, and (ii) that these vortex lines were constantly being displaced along the circumferential axis on either side of the plane of symmetry and towards the region of the ring furthest away from the wall. Key factors which may be responsible for this phenomenon have been identified and are discussed in this paper.     

Shape of a shock wave diffracted by a rounded corner

The diffraction of shock waves by rounded corners has been studied experimentally. Some features introduced by the rounding of the corner in the profile of the diffracted shock wave are found. The velocity of the wall part of the diffracted shock wave in the flat section after the rounding is determined. The unsteady motion of a shock wave along a cylindrical surface is considered.     

Nonlinear Strong Shock Interactions: A Shock-Fitted Approach

This paper addresses nonlinear effects which result from the interaction of shock waves with vortices. A series of experiments are carried out, which involve the interaction of a strong shock wave with a single plane vorticity wave and a randomly distributed wave system. These experiments are first conducted in the linear regime to obtain a mutual verification of theory and computation. They are subsequently extended into the nonlinear regime. A systematic study of the interaction of a plane shock wave and a single vortex is then conducted. Specifically, we investigate the conditions under which nonlinear effects become important, both as a function of shock Mach number, M ₁, and incident vortex strength (characterized by its circulation Γ). The shock Mach number is varied from 2 to 8, while the circulation of the vortex is varied from infinitesimally small values (linear theory) to unity. Budgets of vorticity, dilatation, and pressure are obtained. They indicate that nonlinear effects become more significant as both the shock Mach number and the circulation increase. For Mach numbers equal to 5 and above, the dilatation in the vortex core grows quadratically with circulation. An acoustic wave propagates radially outward from the vortex center. As circulation increases, its upstream-facing front steepens at low Mach numbers, and its downstream-facing front steepens at high Mach numbers. A high Mach number asymptotic expansion of the Rankine--Hugoniot conditions reveals that nonlinear effects dominate both the shock motion and the downstream flow for ΓM ₁ > 1. Received 28 June 1997 and accepted 25 November 1997     

激波喷出过程和在林带中的传播

运用激波管技术研究了激波从管口喷出和在林带中传播这两个基本问题。给出了三方面的结果 :揭示了激波从管口喷出时的复杂流场 ,显示了主激波弯曲和衰减 ,二次激波的形成和合拢 ,涡环的长大和发展 ,以及涡环前缘出现正激波等基本物理现象 ;显示了激波在林带中的传播过程 ,取得了激波遇林地的反射 ,马赫杆形成 ,激波与林冠的相遇 ,林冠对涡环的阻滞效应等纹影照片 ;沿激波在林地的传播方向测量了地面压力 ,证实林带有明显的消波效应。     

On the starting point of curvature for reflected diffracted shock wave (subsonic and sonic cases)

Srivastava (1995) has considered the case of starting point of curvature for the reflected diffracted shock wave when the relative outflow behind the reflected shock wave before diffraction is supersonic. In the present note we have considered the case of the starting point of curvature for the reflected diffracted shock wave when the relative outflow behind the reflected shock wave before diffraction in subsonic and sonic. Skews (1967) has earlier determined the starting point of curvature for a normal shock wave diffracting around a corner.