Kinetics of the reactions of CH3O with Br and BrO at 298 K

A discharge flow reactor coupled to a laser-induced fluorescence (LIF) detector and a mass spectrometer was used to study the kinetics of the reactions CH₃O+Br→products (1) and CH₃O+BrO→products (2). From the kinetic analysis of CH₃O by LIF in the presence of an excess of Br or BrO, the following rate constants were obtained at 298 K: k₁=(7.0±0.4)×10⁻¹¹ cm³ molecule⁻¹ s⁻¹ and k₂=(3.8±0.4)×10⁻¹¹ cm³ molecule⁻¹ s⁻¹. The data obtained are useful for the interpretation of other laboratory studies of the reactions of CH₃O₂ with Br and BrO. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 249–255, 1998.     

The very-low-pressure study of the kinetics and equilibrium: Cl + CH4 ⇄ CH3 + HCl at 298 K. The heat of formation of the CH3 radical

The bimolecular rate constant for the direct reaction of chlorine atoms with methane was measured at 25°C by using the very-low-pressure-pyrolysis technique. The rate constant was found to be In addition, the ratio k₁/k_?1 was observed with about 25% accuracy: K₁₍₂₉₈₎ = 1.3 ± 0.3. This gives a heat of formation of the methyl radical ΔH° _{f 298}(CH₃) = 35.1 ± 0.15 kcal/mol. A bond dissociation energy BDE (CH₃ ? H) = 105.1 ± 0.15 kcal/mol in good agreement with literature values was obtained.     

Adsorption of a Polar or a Non-Polar Chloroalkene on a ZSM-5 Zeolite at 298 K

The physisorption of trichloroethylene and tetrachloroethylene on ZSM-5 (Si/Al = 339) zeolite was investigated at 298 K using thermogravimetry, differential microcalorimetry and X-ray diffraction. The zeolite always undergoes a monoclinic-orthorhombic structural change during the adsorption of the first molecules. An alignment of the polar trichloroethylene molecules inside all the channels of the zeolite is proposed to account for the experimental results. A phase transition of the non-polar tetrachloroethylene is suggested to produce the stepped isotherm, the steep rise in the heat curve and the high increase in the mobility of the molecules for the loading of 4 molecules per unit cell. This revised version was published online in July 2006 with corrections to the Cover Date.     

Optical Properties of Highly Fluorinated and Photosensitive Organically-Modified Silica Films for Integrated Optics

We report the synthesis and optical properties (refractive index and absorption) of a class of highly fluorinated, photosensitive ormosils, and investigate their refractive index, absorption and UV-imprinting properties to assess them for optical waveguide applications.     

Kinetic measurements of the gas phase HO2+CH3O2 cross-disproportionation reaction at 298 K

Flash photolysis kinetic absorption spectroscopy was used to investigate the gas phase reaction between hydroperoxy (HO₂) and methylperoxy (CH₃O₂) radicals at 298 K. Due to the large difference between the self-reactivities of the two radicals, first- or second-order kinetic conditions could not be maintained for either species. Thus, the rate constant for the cross reaction was determined from computer-modeled fits of the radical absorption decay curves, at wavelengths between 215 and 280 nm. This procedure yielded k = 2.9 × 10⁻¹² cm³ molecule⁻¹ s⁻¹ independent of total pressure (using N₂) between 25 and 600 Torr, and of the partial pressure of water vapor (up to 11.6 Torr). There was also no effect of water vapor on the rate constant for the self-reaction of methylperoxy radicals.     

Surfactant Templated Silica Xerogels as Adsorbents for Rhodamine 6G

A series of silica xerogels was synthesized by using TEOS as the silica precursor and a non ionic surfactant Triton X100 (TX100) and a cationic surfactant Hexadecyltrimethylammonium Bromide (CTAB) as templates. The xerogels were synthesized through 2‐way catalysis using ultrasonic radiations for homogeneous mixing of the precursors and template. The surfactant template was later removed through calcination at 550 °C. It was found out that gels having CTAB as the template had higher surface area (612.08 m²/g) than the gels templated by TX100 (539.6 m²/g). High surface area xerogels were used in adsorption experiments for aqueous solutions of Rhodamine 6G (R6G). UV visible spectroscopy was used to find out the concentrations of dye solutions. The adsorption data of both the types of xerogels was found to follow Freundlich's adsorption model pointing towards the possibility of adsorption of the dye molecules on the heterogeneous surface of the adsorbent.     

Spectropotentiometric Study of Complexation Equilibrium in the System H2TAPBr4, H2TAPCl4-(CH3COO)2Cd-HClO4-DMSO at 298 K

A procedure was suggested for direct measurement of the equilibrium constant of complex formation of porphyrins MX₂ + H₂P MP + 2HX, based on providing conditions under which the direct reaction is suppressed and the reverse reaction is facilitated. The procedure is applicable to complexation of Cd^{2 +} with tetrachloro- and tetrabromotetraazaporphyrins in DMSO in the presence of HClO₄.     

Solubility of Elemental Sulfur in Water at 298 K

Abstract

The solubility of elemental rhombic sulfur in water is 1.9(±0.6) × 10^?8 mole S₈·kg^?1. This value is in agreement with thermodynamic considerations on the solubility of sulfur and experimental data on sulfur hydrosols.     

Raman spectroscopy of likasite at 298 and 77 K

Raman spectroscopy at 298 and 77K has been used to study the structure of likasite, a naturally occurring basic copper(II) nitrate of formula Cu3NO3(OH)5.2H2O. An intense sharp band is observed at 3522 cm(-1) at 298 K which splits into two bands at 3522 and 3505 cm(-1) at 77 K and is assigned to the OH stretching mode. The two OH stretching bands at 3522 and 3505 provide estimates of the hydrogen bond distances of these units as 2.9315 and 2.9028 angstroms. The significance of this result is that equivalent OH units in the 298 K spectrum become two non-equivalent OH units at 77 K suggesting a structural change by cooling to liquid nitrogen temperature. A number of broad bands are observed in the 298 K spectrum at 3452, 3338, 3281 and 3040 cm(-1) assigned to H2O stretching vibrations with estimates of the hydrogen bond distances of 2.8231, 2.7639, 2.7358 and 2.6436 angstroms. Three sharp bands are observed at 77 K at 1052, 1050 and 1048 cm(-1) attributed to the nu1 symmetric stretching mode of the NO3 units. Only a single band at 1050 cm(-1) is observed at 298 K, suggesting the non-equivalence of the NO3 units at 77 K, confirming structural changes in likasite by cooling to 77 K.     

Synthesis of Hydrophilic and Hydrophobic High Surface Area Xerogels at pHs Below Silica Iso-electric Point

The synthesis of hydrophilic and hydrophobic high surface area (up to 1087 m²/cc) silica xerogels at pHs below 2 is demonstrated in this work. High surface area xerogels exhibit extremely fine microstructural features and fast gelation times (less than one hour). Contrary to conventional generalization that xerogels synthesized at low pH are polymeric, it is demonstrated that particulate xerogels can also be synthesized at pHs below 2. These xerogels are synthesized by the addition of large amounts of NH₄OH and have relatively lower surface areas. The particulate nature of these xerogels is indicated by their opacity and from their coarse microstructural features as observed by TEM.     

A study of the self reaction of CH2ClO2 and CHCl2O2 radicals at 298 K

A low‐pressure discharge‐flow system equipped with laser‐induced fluorescence (LIF) detection of NO₂ and resonance‐fluorescence detection of OH has been employed to study the self reactions CH₂ClO₂ + CH₂ClO₂ → products (1) and CHCl₂O₂ + CHCl₂O₂ → products (2), at T = 298 K and P = 1–3 Torr. Possible secondary reactions involving alkoxy radicals are identified. We report the phenomenological rate constants (k_obs) k_1obs = (4.1 ± 0.2) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ k_2obs = (8.6 ± 0.2) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ and the rate constants derived from modelling the decay profiles for both peroxy radical systems, which takes into account the proposed secondary chemistry involving alkoxy radicals k₁ = (3.3 ± 0.7) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ k₂ = (7.0 ± 1.8) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ A possible mechanism for these self reactions is proposed and QRRK calculations are performed for reactions (1), (2) and the self‐reaction of CH₃O₂, CH₃O₂ + CH₃O₂ → products (3). These calculations, although only semiquantitative, go some way to explaining why both k₁ and k₂ are a factor of ten larger than k₃ and why, as suggested by the products of reaction (1) and (2), it seems that the favored reaction pathway is different from that followed by reaction (3). The atmospheric fate of the chlorinated peroxy species, and hence the impact of their precursors (CH₃Cl and CH₂Cl₂), in the troposphere are briefly discussed. HC(O)Cl is identified as a potentially important reservoir species produced from the photooxidation of these precursors. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 433–444, 1999     

Rate constant and RRKM product study for the reaction between CH3 and C2H3 at T = 298 K

The total rate constant k₁ has been determined at P = 1 Torr nominal pressure (He) and at T = 298 K for the vinyl‐methyl cross‐radical reaction: (1) CH₃ + C₂H₃ → Products. The measurements were performed in a discharge flow system coupled with collision‐free sampling to a mass spectrometer operated at low electron energies. Vinyl and methyl radicals were generated by the reactions of F with C₂H₄ and CH₄, respectively. The kinetic studies were performed by monitoring the decay of C₂H₃ with methyl in excess, 6 < [CH₃]₀/ [C₂H₃]₀ < 21. The overall rate coefficient was determined to be k₁(298 K) = (1.02 ± 0.53) × 10⁻¹⁰ cm³ molecule⁻¹ s⁻¹ with the quoted uncertainty representing total errors. Numerical modeling was required to correct for secondary vinyl consumption by reactions such as C₂H₃ + H and C₂H₃ + C₂H₃. The present result for k₁ at T = 298 K is compared to two previous studies at high pressure (100–300 Torr He) and to a very recent study at low pressure (0.9–3.7 Torr He). Comparison is also made with the rate constant for the similar reaction CH₃ + C₂H₅ and with a value for k₁ estimated by the geometric mean rule employing values for k(CH₃ + CH₃) and k(C₂H₃ + C₂H₃). Qualitative product studies at T = 298 K and 200 K indicated formation of C₃H₆, C₂H₂, and C₃H₅ as products of the combination‐stabilization, disproportionation, and combination‐decomposition channels, respectively, of the CH₃ + C₂H₃ reaction. We also observed the secondary C₄H₈ product of the subsequent reaction of C₃H₅ with excess CH₃; this observation provides convincing evidence for the combination‐decomposition channel yielding C₃H₅ + H. RRKM calculations with helium as the deactivator support the present and very recent experimental observations that allylic C‐H bond rupture is an important path in the combination reaction. The pressure and temperature dependencies of the branching fractions are also predicted. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 304–316, 2000     

Rate coefficients for the reactions CH3 + Br2 (224–358 K), CH3CO + Br2 (228 and 298 K), and Cl + Br2 (228 and 298 K)

Rate coefficients for the reactions of CH₃ + Br₂ (k₂), CH₃CO + Br₂ (k₃), and Cl + Br₂ (k₅) were measured using the laser‐pulsed photolysis method combined with detection of the product Br atoms using resonance fluorescence. For the reactions involving organic radicals, the rate coefficients were observed to increase with decreasing temperature and within the temperature range explored, were adequately described by Arrhenius‐like expressions: k₂ (224–358 K) = 1.83 × 10^?11 exp(252/T) and k₃ (228–298 K) = 2.92 × 10^?11 exp(361/T) cm³ molecule^?1 s^?1. The total, temperature‐independent uncertainty for each reaction (including possible systematic errors in Br₂ concentration measurement) was estimated as ～7% for k₂ and 10% for k₃. Accurate data on k₅ was obtained at 298 K, with a value of 1.88 × 10^?10 cm³ molecule^?1 s^?1 obtained (with an associated error of 6%). A limited data set at 228 K suggests that k₅ is, within experimental uncertainty, independent of temperature. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 575–585, 2010     

Surface Energy Changes of Heat Treated TEOS Derived Silica Xerogels

The surface energy of monolithic silica xerogels was examined by measuring the interaction of organic probes with xerogels heated at temperatures close to the gel-to-glass transition temperature. Values of the dispersive component of the surface energy, , between 60 and 80 mJ m^-2 have been observed using n-alkanes for silica xerogels heated at 700, 800 and 900°C. At 1000°C, decreases to 8.37 mJ · m^-2. Also the differential heat of adsorption, variation of standard free energy and entropy of adsorption decrease when the silica xerogel is heated at 1000°C, showing a lower interaction potential of the organic probes with the silica surface. For the silica xerogels heated between 700 and 900°C, the acid character varies in accordance with the variation of the chemical nature of the silica. Upon heating at 1000°C, both acid and base characters are very close in accordance with a neutral surface. Within the experimental conditions used in this work, the surface of the obtained monolithic silica xerogels behaves as a glass surface when the treating temperature is 1000°C.     

UV absorption spectra of HO2 and CH3O2 radicals and the kinetics of their mutual reactions at 298 K

We report results of a flash photolysis study of the UV, spectra of HO₂ and CH₃O₂ radicals, obtained by using a calibration technique based on the reaction Cl+NO→NOCl. We also report preliminary results from our study of the kinetics of the reaction CH₃O₂+HO₂→products at room temperature and near atmospheric pressure. Our results are consistent with the only previous direct determination of the rate constant of the second reaction: k₁ = (6.4 ± 1.0) × 10⁻¹²cm₃ molecule⁻ s⁻¹. From the same study we derive rate constants for the self-reaction of HO₂ and CH₃O₂ radicals, which agree with recommended values.     

Thermodynamic Parameters of the Dissolution of 4-Hydroxy-L-Proline and L-Phenylalanine in Mixed Aqueous Solvents at 298 K

The enthalpies of solution of 4-hydroxy-L-proline and L-phenylalanine in binary mixed aqueous solvents containing acetonitrile (AN), 1,4-dioxane (1,4-DO), or acetone (AC) at mole fractions of 0 to 0.25 are determined at T = 298.15 K via isothermal calorimetry. The standard enthalpies of solution (Δ_solH°) and transfer (Δ_trH°) of 4-hydroxy-L-proline and L-phenylalanine from water to mixed aqueous solvents are calculated using the experimental calorimetric data, as are the enthalpy coefficients of paired interactions (h _xy ) between the molecules of the investigated amino acids and the organic solvents. The effects the mixed aqueous solvent composition and the structure of the organic solvent molecules have on the enthalpies of solution and transfer for the investigated amino acids are considered. The correlation between the enthalpy of solution of the amino acids and the electron-donating properties of the organic solvents in the mixed aqueous solvent systems is established.