DFT study of the fragmentation mechanism of uracil RNA base

The fragmentation process of the uracil RNA base has been investigated via DFT calculations in order to assign fragments to the ionisation mass spectrum obtained after dissociation induced by collision experiments. The analysis of the electronic distribution and geometry parameters of the cation allows selection of several bonds that may be cleaved and lead to the formation of various fragments. Differences are observed in the electronic behaviour of the bond breaking as well as the energy required for the cleavage. It is reported that N(3)-C(4) and N(1)-C(2) bonds are more easily cleaved than the C(5)-C(6) bond, since the corresponding energy barriers amount to ΔG = +1.627, +1.710, +5.459 eV, respectively, which makes the C(5)-C(6) bond cleavage almost prohibited. Among all possible formed fragments, the formation of the OCN(+) fragment for the peak at m/z = 42 Da is excluded because of an intermediate that was not observed experimentally and too a large free energy barrier. Based on the required free energy, it is observed that two fragment derivatives: C(2)H(4)N(+) and C(2)H(2)O˙(+) may be formed, with a small preference for C(2)H(4)N(+). This latter product is not formed through a retro Diels Alder reaction in contrast to C(2)H(2)O˙(+). The following sequence is proposed for the peak at 42 Da: C(2)H(4)N(+) (from N(1)-C(2), C(4)-C(5) cleavages) > C(2)H(2)O˙(+) (from N(3)-C(4), N(1)-C(2) and C(5)-C(6) cleavages) > C(2)H(4)N(+) (from N(1)-C(2), N(3)-C(4) and C(4)-C(5)) > C(2)H(2)O˙(+) (from C(5)-C(6), N(1)-C(2) and N(3)-C(4) cleavages) > NCO(+) (from N(1)-C(2), C(4)-C(5) and N(3)-C(4) cleavages). Finally the peak at 28 Da is assigned to CNH(2)(+) derivatives that can be formed through two different paths, the easiest one requiring 5.4 eV.     

Synthesis of the C(1)-C(12) segment of peloruside A by an alpha-benzyloxymethyl ketone aldol strategy

The C(1)-C(12) segment of 16-membered antitumor macrolide peloruside A has been prepared by a BF(3).OEt(2)-catalyzed Mukaiyama aldol reaction between a glucose-derived C(1)-C(7) aldehyde and a C(8)-C(12) alpha-benzyloxymethyl ketone. Exclusive 2,3-anti and moderate 3,5-anti/syn facial selectivity (3.5:1) was observed in the aldol reaction. The key C(1)-C(7) aldehyde contains the required stereochemistry at carbons two, three, and five, and has been efficiently prepared on multigram scales from commercial triacetyl D-glucal. [reaction: see text]     

Toward the synthesis of norzoanthamine: complete fragment assembly

The complex marine alkaloid norzoanthamine (2) was envisioned to be assembled from three key building blocks: the C1-C5 fragment A, the C6-C10 fragment B, and the C11-C24 fragment C. The synthesis of fragment A was achieved in 14 steps and 33% overall yield from (R)-gamma-hydroxymethyl-gamma-butyrolactone. Fragment B was made in two steps from PMB-protected 4-pentynol in 76% yield. The C11-C24 fragment C was made from (S)-carvone via (R)-isocarvone in 18 steps (6% overall yield). The convergent stereoselective synthesis of the entire carbon framework (C1-C24) of the target molecule was achieved via the following assemblage. Alkenyl iodide 20 derived from the C11-C24 fragment C was coupled to fragment B (C6-C10) through a high-yielding Stille coupling reaction of these two sterically very demanding coupling partners, affording the key Diels-Alder precursor 24. The intramolecular Diels-Alder reaction proceeded smoothly in excellent yield and diastereoselectivity, generating the tricyclic trans-anti-trans perhydrophenanthrene motif of norzoanthamine (C6-C24). The final fragment coupling between lithiated fragment A (C1-C5) and aldehyde 40 (C6-C24) has also been successfully accomplished affording the entire carbon framework of the natural product.     

Energetic and topological analysis of the reaction of Mo and Mo2 with NH3, C2H2, and C2H4 molecules

The Density functional theory has been applied to characterize the structural features of Mo(1,2)-NH(3),-C(2)H(4), and -C(2)H(2) compounds. Coordination modes, geometrical structures, and binding energies have been calculated for several spin multiplets. It has been shown that in contrast to the conserved spin cases (Mo(1,2)-NH(3)), the interaction between Mo (or Mo(2)) and C(2)H(4) (or C(2)H(2)) are the low-spin (Mo-C(2)H(4) and -C(2)H(2)) and high-spin (Mo(2)-C(2)H(4) and -C(2)H(2)) complexes. In the ground state of Mo(1,2)-C(2)H(4) and -C(2)H(2), the metal-center always reacts with the C-C center. The spontaneous formation of the global minima is found to be possible due to the crossing between the potential energy surfaces (ground and excited states with respect to the metallic center). The bonding characterization has been performed using the topological analysis of the Electron Localization Function. It has been shown that the most stable electronic structure for a pi-acceptor ligand correlates with a maximum charge transfer from the metal center to the C-C bond of the unsaturated hydrocarbons, resulting in the formation of two new basins located on the carbon atoms (away from hydrogen atoms) and the reduction of the number of attractors of the C-C basin. The interaction between Mo(1,2) and C(2)H(4) (or C(2)H(2)) should be considered as a chemical reaction, which causes the multiplicity change. Contrarily, there is no charge transfer between Mo(1,2) and NH(3), and the partners are bound by an electrostatic interaction.     

Self-aggregation of binary mixtures of alkyltriphenylphosphonium bromides: a critical assessment in favor of more than one kind of micelle formation

The micellization behavior of binary combinations of alkyltriphenylphosphonium bromides (ATPBs) with alkyl chain carbons 10, 12, 14, and 16 has been studied by conductometry and calorimetry. The combinations C(10)-C(12), C(10)-C(14), C(10)-C(16), C(12)-C(14), C(12)-C(16), and C(14)-C(16) were found to form two cmc's by both the methods, with good agreement, except C(14)-C(16)TPB, which has evidenced only a single cmc by calorimetry for all combinations. The combinations C(10)-C(12) (for both cmc(1) and cmc(2)) and C(10)-C(14)TPB (for cmc(2)) formed ideal mixtures, whereas the rest were nonideal. In the nonideal binary mixtures, the ATPB components showed antagonistic interaction with each other. The cmc, interaction parameter (beta), mixed micellar composition, extent of counterion binding, and thermodynamic parameters for the micellization process have been reported and discussed. The enthalpy of mixed micelle formation has been found to have a fair correlation with a Clint-type relation applicable to ideal binary mixtures of surfactants.     

Synthesis of amphidinolide E C10-C26 fragment

The key C10-C26 fragment in a total synthesis of (-)-amphidinolide E has been prepared from an oxolane-containing C10-C17 segment (9, derived from L-glutamic acid) via a Julia-Kocienski reaction with aldehyde 3, followed by a Sharpless AD to obtain the desired diol. The C22-C26 fragment was installed by means of an efficient Suzuki-Molander coupling, with an organotrifluoroborate reagent (4, arising from a cross-metathesis reaction between a vinylboronate and 2-methyl-1,4-pentadiene).     

1,6-asymmetric induction in boron-mediated aldol reactions: application to a practical total synthesis of (+)-discodermolide

By relying solely on substrate-based stereocontrol, a practical total synthesis of the microtubule-stabilizing anticancer agent (+)-discodermolide has been realized. This exploits a novel aldol bond construction with 1,6-stereoinduction from the boron enolate of (Z)-enone 3 in addition to aldehyde 2. The 1,3-diol 7 is employed as a common building block for the C(1)-C(5), C(9)-C(16), and C(17)-C(24) subunits. [reaction--see text]     

Expedient access to the okadaic acid architecture: a novel synthesis of the C1-C27 domain.

A newly designed synthetic entry to the C1-C27 domain of okadaic acid has been developed. This incorporates substantial improvements in the preparations of the key okadaic acid building blocks representing the C3-C8, C9-C14, and C16-C27 portions. The synthesis of the C3-C8 lactone used (R)-glycidol as the origin of the C4 stereogenic center and featured a late-stage optional incorporation of the C7 hydroxyl group. The complementary C9-C14 fragment was synthesized in a concise route from (R)-3-tert-butyldimethylsilyloxy-2-methylpropanal and propargyl bromide. Assembly of the C3-C14 spiroketal-containing intermediate from the constitutent fragments revealed a dramatic effect of C7 functionalization upon spiroketalization efficiency. In contrast, both (9E)- and (9Z)-enones converged readily to the C8 spiroketal upon treatment with acid. Modifications to the central C16-C27 fragment of okadaic acid included the early replacement of benzylic protecting groups by more suitable functionalities to facilitate both the generation of the C15-C27 intermediate and the deprotection of the final products. These modular building blocks were deployed for the synthesis of the C1-C27 scaffold of 7-deoxyokadaic acid. This work demonstrates improvements in the formation of versatile okadaic acid intermediates, as well as a reordering of fragment couplings. This alternative order of coupling was designed to promote the late stage incorporation of nonnatural lipophilic extensions from the C27 terminus.     

Adsorption of gemini surfactants with dodecyl side chains and different spacers, including partially fluorinated spacers, on different surfaces: neutron reflectometry results

Neutron reflectometry has been used to study the adsorption of two symmetrical cationic (dimethyl ammonium bromide) gemini surfactants with two C(12)H(25) chains and different partially fluorinated spacers at three different surfaces: air/water, hydrophilic silica/water, and hydrophobic (octadecyltricholorosilane (OTS))/water. In addition, the adsorption of purely hydrocarbon geminis with the same side chains and spacers of different lengths has been studied at the same two solid surfaces. The limiting close-packed areas for the two fluorocarbon geminis, C(12)-C(3)fC(6)C(3)-C(12) and C(12)-C(4)fC(4)C(4)-C(12), are 92 and 72 ± 4 at the hydrophilic silica surface, 81 and 89 ± 4 at OTS, and 137 and 106 ± 4 ?(2) at the air/water interface with decreases of 38 and 24% from air/water to the average solid value, respectively. These changes suggest that the packing at the air/water interface is inefficient, and this allows the extra hydrophobicity of the chain environment at the two solid surfaces to promote much more efficient packing. At the air/water interface, the fluorocarbon spacers are on average the fragments furthest away from the underlying water, further out than in the nearest comparable hydrocarbon gemini, C(12)-C(12)-C(12). This is the probable explanation of the much lower value of the area per molecule at the air/water interface of C(12)-C(4)fC(4)C(4)-C(12) compared to that of C(12)-C(12)-C(12). It is also the probable cause of the inefficient packing of the hydrocarbon side chains. At the more hydrophobic OTS surface the situation is reversed and the fluorocarbon spacers are now the furthest from the hydrophobic surface, further out than the spacer in C(12)-C(12)-C(12). This is an unusually large structural change that must be associated with the greatly improved packing at the OTS surface. The efficiency of the packing is also high for the hydrophilic surface, no doubt because the hydrocarbon chains can interact favorably in the adsorbed bilayer core. The values of the area per molecule obtained for the series of hydrocarbon geminis at the air/water, OTS/water and silica/water interfaces are respectively 139, 104, and 98 ± 4 ?(2) for C(12)-C(12)-C(12), 114, 106, and 94 ± 4 ?(2) for C(12)-C(10)-C(12), 104, 84, and 85 ± 4 ?(2) for C(12)-C(6)-C(12), and 78, 66, and 70 ± 3 ?(2) for C(12)-C(3)-C(12). The area per molecule is also about 20% less on average at the two solid surfaces than at the air/water interface. This can also be attributed to more efficient packing caused by the more favorable hydrophobic interactions possible at these two surfaces than at the air/water interface, again showing that the packing at the air/water interface is inefficient and probably resulting from the competition between spacer and chains, which will be most pronounced for the C(12) spacer.     

Synthesis and Structure of 6-(4- Fluorobenzylamino)-3-methylthio-1,5- diphenyl-1H-pyrazolo[3,4-d]pyrimidin-4(5H)-one

1 INTRODUCTION It was reported that the pyrazolopyrimidinone derivatives play a very important role in the bio- chemistry of living cell. Many potential drugs[1～3] and agrochemicals[4, 5] have been modeled on the compound, and the study on derivatives …     

Synthetic and structural studies on C-ethynyl- and C-bromo-carboranes

A high-yield preparation of the C-monoethynyl para-carborane, 1-Me(3)SiC[triple bond]C-1,12-C2B10H11, from C-monocopper para-carborane and 1-bromo-2-(trimethylsilyl)ethyne, BrC[triple bond]CSiMe(3) is reported. The low-yield preparation of 1,12-(Me3SiC[triple bond]C)2-1,12-C2B10H10 from the C,C'-dicopper para-carborane derivative with 1-bromo-2-(trimethylsilyl)ethyne, BrC[triple bond]CSiMe3, has been re-investigated and other products were identified including the C-monoethynyl-carborane 1-Me3SiC[triple bond]C-1,12-C2B10H11 and two-cage assemblies generated from cage-cage couplings. The contrast in the yields of the monoethynyl and diethynyl products is due to the highly unfavourable coupling process between 1-RC[triple bond]C-12-Cu-1,12-C2B10H10 and the bromoalkyne. The ethynyl group at the cage carbon C(1) strongly influences the chemical reactivity of the cage carbon at C(12)-the first example of the "antipodal effect" affecting the syntheses of para-carborane derivatives. New two-step preparations of 1-ethynyl- and 1,12-bis(ethynyl)-para-carboranes have been developed using a more readily prepared bromoethyne, 1-bromo-3-methyl-1-butyn-3-ol, BrC[triple bond]CCMe2OH. The molecular structures of the two C-monoethynyl-carboranes, 1-RC[triple bond]C-1,12-C2B10H11 (R = H and Me3Si), were experimentally determined using gas-phase electron diffraction (GED). For R = H (R(G) = 0.053) a model with C(5v) symmetry refined to give a C[triple bond]C bond distance of 1.233(5) A. For R = Me3Si (R(G) = 0.048) a model with C(s) symmetry refined to give a C[triple bond]C bond distance of 1.227(5) A. Molecular structures of 1,12-Br2-1,12-C2B10H10, 1-HC[triple bond]C-12-Br-1,12-C2B10H10 and 1,12-(Me(3)SiC[triple bond]C)2-1,12-C2B10H10 were determined by X-ray crystallography. Substituents at the cage carbon atoms on the C2B10 cage skeleton in 1-X-12-Y-1,12-C2B10H10 derivatives invariably lengthen the cage C-B bonds. However, the subtle substituent effects on the tropical B-B bond lengths in these compounds are more complex. The molecular structures of the ethynyl-ortho-carborane, 1-HC[triple bond]C-1,2-C2B10H11 and the ethene, trans-Me3SiBrC=CSiMe3Br are also reported.     

Molecular structure of 1,5-diazabicyclo[3.1.0]hexane as determined by gas electron diffraction and quantum-chemical calculations

The equilibrium molecular structure and conformation of 1,5-diazabicyclo[3.1.0]hexane (DABH) has been studied by the gas-phase electron-diffraction method at 20 degrees C and quantum-chemical calculations. Three possible conformations of DABH were considered: boat, chair, and twist. According to the experimental and theoretical results, DABH exists exclusively as a boat conformation of C s symmetry at the temperature of the experiment. The MP2 calculations predict the stable chair and twist conformations to be 3.8 and 49.5 kcal mol(-1) above the boat form, respectively. The most important semi-experimental geometrical parameters of DABH (r(e), A and angle)e), deg) are (N1-N5) = 1.506(13), (N1-C6) = 1.442(2), (N1-C2) = 1.469(4), (C2-C3) = 1.524(7), (C6-N1-C2) = 114.8(8), (N5-N1-C2) = 107.7(4), (N1-C2-C3) = 106.5(9), and (C2-C3-C4) = 104.0(10). The natural bond orbital (NBO) analysis has shown that the most important stabilization factor in the boat conformation is the n(N) --> sigma*(C-C) anomeric effect. The geometry calculations and NBO analysis have been performed also for the bicyclohexane molecule.     

Stability of silicon-doped C60 dimers

A theoretical investigation on the structure, stability, and thermal behaviors of the smallest polymeric units, the dimers, formed from substitutionally Si-doped fullerenes is presented. A density functional based nonorthogonal tight-binding model has been employed for describing the interatomic interactions. The study focuses on those polymeric structures which involve Si-Si or Si-C interfullerene bonds. The binding energy of the dimers increases with their Si content from about 0.25 eV in C(60)-C(60) to about 4.5 eV in C(58)Si(2)-C(58)Si(2). Moreover, the C(59)SiC(59) dimer, linked through the sharing of the Si atom between the two fullerenes, has been also considered. Upon heating, the dimers eventually fragment into their constituent fullerene units. The fragmentation temperature correlates with the strength of the interfullerene bonds. C(58)Si(2)-C(58)Si(2) exhibits a higher thermal stability (fragmentation temperature of approximately 500 K) than the pure carbon C(60)-C(60) dimer (with a fragmentation temperature of approximately 325 K). Given the higher structural and thermal stabilities of the Si-doped fullerene dimers, the authors propose the use of substitutionally Si-doped fullerenes as the basic units for constructing new fullerene-based polymers.     

Pd-catalyzed cross-coupling reactions of alkyl halides

Cross-coupling reactions have become indispensable tools for creating carbon-carbon (or heteroatom) bonds in organic synthesis. Like in other important transition metal catalyzed reactions, such as metathesis, addition, and polymerization, unsaturated compounds are usually employed as substrates for cross-coupling reactions. However during the past decade, a great deal of effort has been devoted to the use of alkyl halides as saturated compounds in cross-coupling reactions, which has resulted in significant progress in this undeveloped area by introducing new effective ligands. Many useful catalytic systems are now available for synthetic transformations based on C(sp(3))-C(sp(3)), C(sp(3))-C(sp(2)) and C(sp(3))-C(sp) bond formation as complementary methods to conventional C(sp(2))-C(sp(2)), C(sp(2))-C(sp) and C(sp)-C(sp) coupling. This tutorial review summarizes recent advances in cross-coupling reactions of alkyl halides and pseudohalides catalyzed by a palladium complex.     

Reversible dimerization of [5,6]-C60O

The recently discovered [5,6]-open isomer of C(60)O has been found to undergo facile dimerization to form a new C(2) symmetry isomer of C(120)O(2), which can be photodissociated with relatively high efficiency to regenerate monomeric [5,6]-C(60)O. High yield dimerization of [5,6]-C(60)O proceeds spontaneously in toluene solution near room temperature. On the basis of (13)C NMR spectroscopy, ab initio quantum computations, and HPLC retention patterns, the resulting C(120)O(2) product has been deduced to be a nonpolar dimer of C(2) symmetry in which the C(60)O moieties are linked by two single bonds between sp(3)-hybridized carbon atoms adjacent to oxygen atoms. Photophysical properties of this dimer have also been measured and compared to those of C(120), the [2 + 2]-dimer of C(60). The ground-state absorption spectrum of C(120)O(2) in toluene is slightly red-shifted relative to that of C(120), with a distinctive peak at 329 nm and an S(1)-S(0) origin band at 704 nm. Its fluorescence spectrum shows two major peaks at 718 and 793 nm. In room-temperature toluene, the measured triplet state intrinsic lifetime of this C(120)O(2) isomer is 34 +/- 2 micros, a value somewhat shorter than that of C(120) (44 micros). C(120)O(2) undergoes photodissociation from its triplet state to regenerate monomeric [5,6]-C(60)O with quantum yields of 2.5% at 24 degrees C and 43% at 70 degrees C. It can therefore serve as a stable reactant for photolytic production of [5,6]-C(60)O. As a simple fullerene adduct that reacts under mild conditions, [5,6]-C(60)O may prove useful in special synthetic applications. Solutions of [5,6]-C(60)O are also unique because they can provide mixtures of a fullerene monomer and its dimer in a dynamic balance controllable by adjustment of concentration, temperature, and optical irradiation.     

1-trimethylsilylphosphirane as a ligand and as a stable masked reagent for phosphirane

1-Trimethylsilylphosphirane, C2H4PSiMe3, has been prepared on a multi gram scale from P(SiMe3)3 via CICH2CH2P(SiMe3)2. C2H4PSiMe3 is readily susceptible to protonolysis forming the thermally unstable parent phosphirane, C2H4PH, in good yields. Reaction of C2H4PSiMe3 with fac-M(CO)3(CH3CN)3 (M = Cr, Mo) or [Fe(eta5-C5H5)(eta6-C6H6)](PF6) give rise tofac-M(CO)3(C2H4PSiMe3)3 and [Fe(eta5-C5H5)(C2H4PSiMe3)3](PF6) respectively. Protonolysis of the free or coordinated 1-trimethylsilylphosphirane readily causes P-Si cleavage to give rise to the parent C2H4PH or the respective complexes,fac-M(CO)3(C2H4PH)3 andfac-[Fe(eta5-C5H5)(C2H4PH)3](PF6) in situ. All new complexes are characterised by analytical and spectroscopic methods and the X-ray crystal structures of fac-Cr(CO)3(C2H4PSiMe3)3 and fac-Mo(CO)3(C2H4PH)3 have also been determined.     

电动势法研究蛋白质与季铵盐Gemini表面活性剂的相互作用

利用自制的季铵盐Gemini表面活性剂二溴化-N,N′-二（二甲基十二烷基）丙二铵（C12-3-C12·2Br）离子选择电极,通过电动势(EMF)法研究了C12-3-C12·2Br与牛血清白蛋白(BSA)之间的相互作用,得到了C12-3-C12·2Br在BSA大分子上结合过程的结合等温线和对应的Scatchard曲线,并通过结合能力的概念得到了结合过程的结合位点数、Hill系数及Hill结合常数。通过研究发现,C12-3-C12·2Br与BSA大分子的结合具有正的协同作用,相互结合的位点可以分为两类,第一类为主要通过静电作用结合的强结合位点,第二类为主要通过疏水作用结合的弱结合位点。     

纳米铁基催化剂在CO2加氢制烃中的性能

使用尿素沉淀凝胶、机械混合和等体积浸渍相结合的方法, 制备了一系列的纳米尺寸FeK-M/γ-Al₂O₃(M=Cd, Cu)催化剂, 采用扫描电镜(SEM)、透射电镜(TEM)、N2物理吸附、X射线衍射(XRD)光谱和H₂程序升温还原(H₂-TPR)仪对催化剂进行表征, 并在小型固定床反应器上考察其对CO₂加氢反应的催化性能. 结果表明:3 MPa, 400 °C, 3600 h^-1, H₂/CO₂摩尔比为3 的条件下, 15%(w, 下同)Fe10%K/γ-Al₂O₃催化剂可稳定运行100h 以上, CO₂转化率为51.3%, C₂₊烃类的选择性达62.6%. Fe 含量降至2.5%时, C₂₊烃类的选择性仍能达到60.0%. 随着K含量由0%增加至10%, 低碳烯烃选择性增加, 烯烷比增加至3.6. Cd和Cu助剂可促进Fe 物种的还原, 改善目的产物的分布, 其中Cu的加入使低碳产物烯烷比增至5.4, Cd的加入使C₅₊产物选择性增加了12%.     

Sc2S@C(s)(10528)-C72: a dimetallic sulfide endohedral fullerene with a non isolated pentagon rule cage

A non isolated pentagon rule metallic sulfide clusterfullerene, Sc(2)S@C(s)(10528)-C(72), has been isolated from a raw mixture of Sc(2)S@C(2n) (n = 35-50) obtained by arc-discharging graphite rods packed with Sc(2)O(3) and graphite powder under an atmosphere of SO(2) and helium. Multistage HPLC methods were utilized to isolate and purify the Sc(2)S@C(72). The purified Sc(2)S@C(s)(10528)-C(72) was characterized by mass spectrometry, UV-vis-NIR absorption spectroscopy, cyclic voltammetry, and single-crystal X-ray diffraction. The crystallographic analysis unambiguously elucidated that the C(72) fullerene cage violates the isolated pentagon rule, and the cage symmetry was assigned to C(s)(10528)-C(72). The electrochemical behavior of Sc(2)S@C(s)(10528)-C(72) shows a major difference from those of Sc(2)S@C(s)(6)-C(82) and Sc(2)S@C(3v)(8)-C(82) as well as the other metallic clusterfullerenes. Computational studies show that the Sc(2)S cluster transfers four electrons to the C(72) cage and C(s)(10528)-C(72) is the most stable cage isomer for both empty C(72)(4-) and Sc(2)S@C(72), among the many possibilities. The structural differences between the reported fullerenes with C(72) cages are discussed, and it is concluded that both the transfer of four electrons to the cage and the geometrical requirements of the encaged Sc(2)S cluster play important roles in the stabilization of the C(s)(10528)-C(72) cage.     

Novel organometallic building blocks for molecular crystal engineering. Part 4. Synthesis and characterization of mono- and bis-amido derivatives of [Co(III)(eta5-C5H4COOH)2]+ and their utilization as ligands

The synthesis and structural characterization of the hexafluorophosphate salts of the substituted bis-amido molecular complexes [Co(III)(eta5-C5H4CONHC4H3N2)2]+ (1), [Co(III)(eta5-C5H4CONHCH2C5H4N)2]+ (2), [Co(III)(eta5-C5H4CON(C5H4N)2)2]+ (3), and of the amido-carboxyl complexes [Co(III)(eta5-C5H4CON(C5H4N)2)(eta5-C5H4COOH)]+ (4), and [Co(III)(eta5-C5H4CONHC2N3(C5H4N)2)(eta5-C5H4COOH)]+ (5) are reported. The pyridyl and pyrazine substituted amido ligands on the sandwich cores have been chosen because they allow both coordination to metal centres and participation in hydrogen bonding. The hydrogen bonding interactions established by the family of complexes in the solid state has been investigated. The utilization of complex 5 for the preparation of the complex of complexes[Cd(NO3)2{Co(III)(eta5-C5H4CONHC2N3(C5H4N)(C5H4NH))(eta5-C5H4COOH)}2]6+ (6) is reported as a first example of the potential of the substituted mono-and bis-amides as ligands. The isolation and structural characterization of the carbonyl chloride cation [Co(III)(eta5-C5H4COCl)2]+ (7) as its tetrachloro cobaltate anion salt is also described.