Au@SiO2纳米粒子的制备及其用于西维因的检测

采用一种简单、低成本的方法制备了单分散不同壳层厚度的Au@SiO2核壳纳米粒子.以结晶紫为探针分子,研究了核壳纳米粒子的壳层隔离纳米粒子增强拉曼光谱（SHINERS）效应与二氧化硅壳层厚度之间的关系.结果表明：随着壳层厚度从30nm减小到4nm,粒子之间局域电磁场作用逐渐增加,探针分子的拉曼信号强度大幅度增强.用增强效果最佳的4 nm SiO2壳层厚度的核壳纳米粒子可检测到浓度低达10-5mol/L溶液中的西维因,希望结合便携拉曼仪实现农产品中残留农药西维因的现场检测.     

Pt-Au核-壳结构纳米粒子热稳定性的分子动力学研究

采用分子动力学方法结合嵌入原子势, 对Pt-Au核-壳纳米粒子的热稳定性进行了研究. 计算结果表明: Pt-Au纳米粒子的熔点明显高于Au纳米粒子而低于Pt纳米粒子. 通过计算Lindemann指数发现: 壳层中的Au首先熔化, 然后逐渐向内部扩展, 最终导致核中的Pt完全熔化; 熔化所经历的温度区间明显宽于单质纳米粒子, 而且该熔化过程呈现典型的两阶段熔化特征; 在两次熔化之间, 存在着固(核)液(壳)共存的结构. 关键词： 纳米粒子 熔化 分子动力学     

水溶性CdTe/CdS纳米晶表面SiO2壳层的反相胶束法包覆

"提出了一种水相中制备CdTe/CdS核壳结构纳米粒子的方法.用Te粉作为碲源,用Na2S作为硫源,在50 ℃下制备了CdTe/CdS核壳结构纳米粒子. 用紫外可见吸收光谱和荧光光谱分析了CdS壳层对CdTe核的影响. 随CdS壳层厚度的增加,紫外可见吸收光谱和荧光光谱均发生了红移. CdS壳层厚度较薄时,CdTe/CdS纳米晶的荧光强度较CdTe纳米粒子有显著提高;而CdS壳层厚度较厚时,CdTe/CdS纳米晶的荧光强度会逐渐降低. 用反相胶束法在CdTe/CdS核壳结构纳米粒子的表面包被一层SiO2,     

中空Ag纳米球壳的制备及性能表征

 以改性聚苯乙烯微球为模板,采用化学镀法在聚苯乙烯微球表面包覆一层银,在四氢呋喃溶液中将聚苯乙烯微球溶解,得到中空Ag纳米球壳。采用扫描电镜、透射电镜和X射线衍射仪对样品进行了表征及分析,并用紫外可见分光光度计研究了粒子的光学性质。实验结果表明：运用此法成功地制备出中空Ag纳米球壳的内径为250 nm,壁厚约为15 nm,并且成功地使纳米粒子的紫外吸收光谱由600 nm红移至900 nm左右,实现了在可见光至近红外光区调节Ag纳米结构的吸收峰。     

透明β-NaYF_4∶Yb,Tm/PMMA纳米复合材料的制备及其光学性能

采用高温溶剂热法制备了一系列不同Yb3+掺杂浓度的上转换发光纳米粒子β-NaYF4∶Yb,Tm和核壳结构的β-NaYF4∶Yb,Tm@β-NaYF4∶Yb纳米粒子。采用X射线衍射(XRD)、场发射扫描电镜(FESEM)、光致发光(PL)谱对材料的物相结构、形貌特征和发光性质进行了表征和研究,并特别研究了温度对材料发光性能的影响。结果表明:保持Tm3+浓度不变,随着Yb3+掺杂浓度的增加,β-NaYF4∶Yb,Tm的发光强度先增大后减小。当Yb3+掺杂摩尔分数为30%时,474 nm和645 nm处的发光强度达到最大值;当Yb3+掺杂摩尔分数为50%时,450 nm和692 nm处的发光强度达到最大值。在β-NaYF4∶Yb(30%),Tm上包裹一层β-NaYF4∶Yb壳层后,其发光显著增强,随壳层Yb3+摩尔分数的增加,发光强度也是先增大后减小。当壳层Yb3+摩尔分数为10%时,核壳结构纳米粒子的发光强度达到最大值;当壳层Yb3+摩尔分数达到40%时,核壳结构纳米粒子的发光强度已经低于未包裹时。将样品进行热处理后,荧光增强。样品的发光强度随环境温度的升高,红光变弱,蓝光增强。采用原位聚合法将β-NaYF4∶Yb,Tm纳米粒子与PMMA制成复合材料后,仍能保持较好的透明度和发光强度。     

核-壳结构的ZnS:Cu/ZnS纳米粒子的制备及发光性质研究

制备了核-壳结构的ZnS:Cu/ZnS纳米粒子以及普通的没有壳的Cu2 掺杂的ZnS纳米粒子,研究了ZnS无机壳层对ZnS:Cu纳米粒子发光性质的影响.透射电子显微镜、激发光谱和发射光谱的研究表明,后加入的Zn2 离子在已经形成的ZnS核表面生长,形成ZnS壳层;而适当厚度的ZnS壳层可以钝化粒子表面,减少无辐射复合中心的数目,抑制表面态对发光的不利影响,提高ZnS:Cu纳米粒子中Cu2 离子在450 nm左右的发光强度.     

功能化超薄壳层隔绝银/聚邻巯基苯胺纳米粒子的简易合成（英文）

本文通过简单的一步合成法制备出了壳层隔绝的银/聚邻巯基苯胺纳米粒子。制得的邻巯基苯胺壳层符合设计要求,并且,仅通过改变加入表面活性剂十二烷基硫酸钠的量便可调控壳层厚度,所得2nm厚度的壳层均一、无针孔且具氨基功能化。鉴于银核的超强等离子共振效应,当这种具有超薄壳层的银/聚邻巯基苯胺纳米粒子作为表面增强拉曼的基底材料时,可获得极强的拉曼增强信号。     

疏水基团修饰的核-壳型NaYF_4/NaLuF_4∶Yb~(3+),Tm~(3+)纳米粒子设计制备

通过异质核诱导,利用溶剂热法在较低温度下合成了具有疏水表面的上转换发光稀土核-壳Na YF4/Na Lu F4∶20%Yb,1%Tm纳米粒子,并利用X射线衍射仪、透射电子显微镜、傅里叶变换红外吸收光谱仪以及荧光光谱仪等测试设备对其进行了结构、形貌和上转换光谱的表征。测试结果表明,纳米粒子核为立方相,壳层为六角相。核-壳型纳米粒子的尺寸平均在20 nm以下,分布较为均匀。在980 nm近红外光激发下,核-壳型纳米粒子发射出较强的紫色和紫外荧光,且发光强度明显高于同尺寸立方相Na Lu F4∶20%Yb,1%Tm纳米粒子。这表明利用异质核诱导的方法制备的核-壳型纳米粒子在生物医学领域具有更高的应用价值。     

Fe2O3/Au/Ag磁性核壳纳米粒子的制备及其SERS研究

本文介绍了一种制备多功能磁性Fe2O3/Au/Ag纳米粒子的简捷方法, 制备的粒子直径大约在100 nm左右, 采用UV-vis和SEM对该结构进行了表征。并通过调节硝酸银的用量, 制备了一系列具有不同壳层厚度和表面结构的多重核壳纳米粒子。以苯硫酚(TP)为探针分子, 研究了不同银壳厚度的磁性纳米粒子的表面增强拉曼散射(SERS)活性。结果表明随Ag:Au比例的不断增加, 其SERS活性呈现先增大后减小的趋势, 这与表面结构的改变有关。     

金纳米棒核／二氧化硅壳纳米复合结构的可控制备及细胞成像

采用模板合成以及溶胶凝胶方法制备了金纳米棒核／二氧化硅壳（GNR@SiO2）纳米复合粒子,探讨了这种新型纳米复合结构的可控制备、光谱性质、细胞毒性和细胞成像。通过紫外可见分光光度计、透射电镜、共聚焦显微镜对样品进行表征,结果表明：通过对反应时间的调控,获得的纳米复合粒子的二氧化硅壳层厚度可以控制在20～30nm。由于二氧化硅壳层的存在,大大提高了金纳米棒的稳定性,同时降低了金纳米棒的细胞毒性;此外,由于二氧化硅壳层具有良好的化学修饰作用,因此可以将荧光探针分子标记在二氧化硅壳层表面,修饰后的纳米复合粒子可以通过细胞内吞作用进入细胞,从而实现细胞内的光学成像。因此,该纳米粒子复合材料在生物传感、细胞成像以及光热治疗等方面有着良好的应用前景。     

Non-equilibrium cation distribution and enhanced spin disorder in hollow CoFe2O4 nanoparticles

We present magnetic properties of hollow and solid CoFe(2)O(4) nanoparticles that were obtained by annealing of Co(33)Fe(67)/CoFe(2)O(4) (core/shell) nanoparticles. Hollow nanoparticles were polycrystalline whereas the solid nanoparticles were mostly single crystal. Electronic structure studies were performed by photoemission which revealed that particles with hollow morphology have a higher degree of inversion compared to solid nanoparticles and the bulk counterpart. Electronic structure and the magnetic measurements show that particles have uncompensated spins. Quantitative comparison of saturation magnetization (M(S )), assuming bulk Néel type spin structure with cationic distribution, calculated from quantitative XPS analysis, is presented. The thickness of uncompensated spins is calculated to be significantly large for particles with hollow morphology compared to solid nanoparticles. Both morphologies show a lack of saturation up to 7 T. Moreover magnetic irreversibility exists up to 7 T of cooling fields for the entire temperature range (10-300 K). These effects are due to the large bulk anisotropy constant of CoFe(2)O(4) which is the highest among the cubic spinel ferrites. The effect of the uncompensated spins for hollow nanoparticles was investigated by cooling the sample in large fields of up to 9 T. The magnitude of horizontal shift resulting from the unidirectional anisotropy was more than three times larger than that of solid nanoparticles. As an indication signature of uncompensated spin structure, 11% vertical shift for hollow nanoparticles is observed, whereas solid nanoparticles do not show a similar shift. Deconvolution of the hysteresis response recorded at 300 K reveals the presence of a significant paramagnetic component for particles with hollow morphology which further confirms enhanced spin disorder.     

Synthesis of core–shell nanoparticles with a Pt nanoparticle core and a silica shell

A method to prepare a core–shell structure consisting of a Pt metal core coated with a silica shell (Pt(in)SiO₂) is described herein. A silica shell was grown on poly(vinylpyrrolidone) (PVP)-stabilized Pt nanoparticles 2–3 nm in size through hydrolysis and condensation reactions of tetraethyl orthosilicate (TEOS) in a water/ethanol mixture with ammonia as a catalyst. This process requires precise control of the reaction conditions to avoid the formation of silica particles containing multiple Pt cores and core-free silica. The length of PVP molecules, water content, concentration of ammonia and Pt nanoparticles in solution were found to significantly influence the core–shell structure. By optimizing these parameters, it was possible to prepare core–shell particles each containing a single Pt nanoparticle with a silica layer coating approximately 10 nm thick.     

A facile route to prepare hierarchical magnetic cobalt–silica hollow nanospheres with tunable shell thickness

Magnetic nanoshells composed of close-packed cobalt–silica nanoparticles have been successfully fabricated on silica spheres. The synthesis is facile and no high pressure, high temperature, or other severe reaction conditions were required. TEM images showed that two batches of the hollow-structured products have a good spherical morphology with an average diameter of 380 and 550 nm, respectively. The surface area and magnetic properties of cobalt–silica nanoshells are measured. By varying the times of the precipitation procedure, the shell thickness is successfully controlled within the 5–30 nm range and each time of procedure might increase the thickness about 5 nm. It is expected that the in situ reaction method can be extended to the synthesis of other hollow metal spheres. The prepared microcapsule with controllable shell thickness and interspaces has the potential to be used for controlled release applications.     

High quality and tuneable silica shell–magnetic core nanoparticles

Obtaining small (<50 nm), monodispersed, well-separated, single iron oxide core–silica (SiO₂) shell nanoparticles for biomedical applications is still a challenge. Preferably, they are synthesised by inverse microemulsion method. However, substantial amount of aggregated and multicore core–shell nanoparticles is the undesired outcome of the method. In this study, we report on the production of less than 50 nm overall size, monodispersed, free of necking, single core iron oxide–SiO₂ shell nanoparticles with tuneable shell thickness by a carefully optimized inverse microemulsion method. The high degree of control over the process is achieved by understanding the mechanism of core–shell nanoparticles formation. By varying the reaction time and precursor concentration, the thickness of silica layer on the core nanoparticles can be finely adjusted from 5 to 13 nm. Residual reactions during the workup were inhibited by a combination of pH control with shock freezing and ultracentrifuging. These high-quality tuneable core–shell nanocomposite particles exhibit superparamagnetic character and sufficiently high magnetization with great potential for biomedical applications (e.g. MRI, cell separation and magnetically driven drug delivery systems) either as-prepared or by additional surface modification for improved biocompatibility.     

金属纳米薄膜在石墨基底表面的动力学演化

采用分子动力学方法研究了金属Au和Pt纳米薄膜在石墨(烯)基底表面的动力学演化过程,探讨了金属薄膜和石墨(烯)基底间的相互作用对金属纳米薄膜在固态基底表面的去湿以及脱附的动力学演化的影响.研究结果表明,在高温下,相同层数的Au和Pt纳米薄膜在单层石墨基底表面上存在不同的去湿现象,主要表现为厚度较小的Pt纳米薄膜在去湿过程中有纳米空洞形成,而同样厚度的Au薄膜在去湿过程中没有形成空洞.Au和Pt两种金属薄膜在高温下都去湿形成纳米液滴,这些液滴最终都以一定的速度脱离基底.在模拟的薄膜厚度范围内(0.2—2.3 nm),Au和Pt纳米液滴脱离基底的速度随厚度增加表现出不同的变化规律.Pt纳米液滴的脱离速度随薄膜初始厚度的增加先增加后减少,而Au脱离速度随厚度的增加先减少,达到一个临界厚度后脱离速度突然迅速增加.利用薄膜与基底间相互作用的不同导致去湿过程中的黏滞耗散不同,定性分析了这种变化规律的原因.此外,进一步研究还发现金属液滴的脱离时间与薄膜厚度和模拟温度的依赖关系,发现脱离时间随薄膜厚度的增加而增加,随模拟温度的升高而减小.这些研究结果可以为金属镀膜、浮选、表面清洁、器件表面去湿等工业生产过程提供理论指导.     

Synthesis and characterization of microporous hollow core-shell silica nanoparticles (HCSNs) of tunable thickness for controlled release of doxorubicin

Hollow core-shell silica nanoparticles (HCSNs) are being considered as one of the most favorable drug carriers to accomplish targeted drug delivery. In the present study, we developed a simple two-step method, employing polystyrene (PS) nanoparticles (150?±?20 nm) as a sacrificial template for the synthesis of microporous HCSNs of size 230?±?30 nm. PS core and the wall structure directing agent cetyl trimethyl ammonium bromide (CTAB) were removed by calcination. Monodispersed spherical HCSNs were synthesized by optimising the parameters like water/ethanol volume ratio, PS/tetraethyl orthosilicate (TEOS) weight ratio, concentration of ammonia, and CTAB. Transmission electron microscopy (TEM) revealed the formation of hollow core-shell structure of silica with tunable thickness from 15 to 30 nm while tailoring the concentration of silica precursor. The results obtained from the cumulative release studies of doxorubicin loaded microporous HCSNs demonstrated the dependence of shell thickness on the controlled drug release behavior. HCSNs with highest shell thickness of 30 nm and lowest surface area of 600 m²/g showed delay in the doxorubicin release, proving their application as a drug carrier in targeted drug delivery systems. The novel concept of application of microporous HCSNs of pore size ~?1.3 nm with large specific surface area in the field of drug delivery is successful.     

Magnetite hollow spheres: solution synthesis,phase formation and magnetic property

Polycrystalline magnetite hollow spheres with diameter of about 200 nm and shell thickness of 30–60 nm were prepared via a facile solution route. For the reaction, ethylene glycol (EG) served as the reducing agent and soldium acetate played the role of precipitator. In addition, polyvinylpyrrolidone (PVP) served as a surface stabilizer. The morphologies and structures were characterized by scanning electron microscopy, transmission electron microscopy and X-ray diffraction. The intermediate products at different stages were also studied to shed light on the evolution of phase formation. It revealed that the hollow structure formed via self-assembly of nanocrystallites (about 15 nm) using sodium acetate as mild precipitator. Evidences further pointed out that the Ostwald ripening process well explained the growth mechanism of the hollow structure. Magnetization measurements showed that the coercivity of magnetite hollow spheres at low temperature is about 200 Oe and the saturation magnetization is about 83 emu g⁻¹, roughly 85% that of the bulk phase, close to the value of its solid counterpart. In addition, a freezing transition was observed at 25 K.     

Synthesis of hollow carbon nitride microspheres by an electrodeposition method

Hollow carbon nitride microspheres have been synthesized using a novel liquid phase electrodeposition technique. The microspheres are composed of numerous nanoparticles with size of about 5-30 nm. The diameters of the spheres range from 800 nm to 1.1 μm, and shell thickness is about 80-250 nm. This is the first attempt to synthesize carbon nitride with specific nanostructure by the electrodeposition method, which is proved to be facile and effective, and can be performed in an atmospheric environment and at a rather low temperature. The hollow carbon nitride may have potential applications as lubrication, catalysis, biomolecule adsorption, drug delivery, electronic materials, etc. in the future.     

Morphological control of Ni/NiO core/shell nanoparticles and production of hollow NiO nanostructures

Chemical synthesis coupled with a microwave irradiation process allowed for the control of size (6–40 nm), shape, and shell thickness of Ni/NiO core/shell nanoparticles. In this unique synthetic route, the size of Ni nanoparticles (NiNPs) was strongly influenced by the nickel salt-to-stabilizer ratio and the amount of the stabilizer. Interestingly, it was observed that the shape of the nanoparticles was altered by varying the reaction time, where longer reaction times resulted in annealing effects and rupture of the stabilizer micelle leading to distinct shapes of Ni/NiO core/shell nanostructures. Product cooling rate was another important parameter identified in this study that not only affected the shape, but also the crystal structure of the core/shell nanoparticles. In addition, a simple and cost-effective method of microwave irradiation of NiNPs led to the formation of distinctly shaped hollow NiO nanoparticles. These high surface area core/shell nanoparticles with well-controlled morphologies are important and can lead to significant advancement in the design of improved fuel cells, electrochromic display devices, and catalysis systems.     

Synthesis of CdS hollow/solid nanospheres and their chain-structures by membrane technique

CdS hollow/solid nanospheres and their chain-structures were successfully synthesized through supporting liquid membrane (SLM) system with bio-membrane. X-ray powder diffraction (XRD), transmission electron microscopy (TEM), UV–Vis spectroscopy, and photoluminescence (PL) spectroscopy have been used for the characterization of the products. The average diameters of CdS solid/hollow spheres are about 10, 40 nm, respectively. The wall of the hollow spheres is about 5 nm. CdS products are all cubic face-centered structure with the cell constant a = 5.830 Å. We also explore the morphology, structure and possible synthesis mechanism. A possible template mechanism has been proposed for the production of the hollow CdS nanocrystals, that is, CdS nanoparticles grow along the non-soakage interface between CHCl3 and reactant solution. During this process, the organic functional groups were crucial to the control of crystal morphologies.