Sorption of nickel and cobalt ions onto cobalt and nickel ferrites

The corrosion of the metal parts in the primary circuit of pressurized water reactors leads to the release of colloidal particles (NiFe(2)O(4), CoFe(2)O(4), NiO, Ni...) and ionic species (Co, Ni, Cr...). Particles can interact with ionic species in the primary medium, contributing to their transport and to their deposition onto surfaces outside the neutron flux generating radioactive contamination. Sorption and zetametry experiments at 25 °C were performed on the Ni(2+)/CoFe(2)O(4) and Co(2+)/NiFe(2)O(4) systems in order to determine the behaviour of corrosion products in the fluid of the primary circuit. Sorption appears as surface complexation starting from pH 6 and is followed by precipitation of hydroxide above pH 7.5. Complexation and solubility constants were obtained from the modelling of sorption curves. The two oxide systems present a very similar sorption behaviour, but some differences, due to their different isoelectric points, could be observed on zetametric measurements.     

Bonding interactions in oxydiacetate and thiodiacetate cobalt(II) and nickel(II) complexes

The influence of the central donor atom of the oxydiacetate and thiodiacetate ligands (oxygen and sulphur atoms, respectively) on the thermodynamic parameters for complexation reactions of the Co²⁺ and Ni²⁺ ions has been investigated using the isothermal titration calorimetry (ITC) technique and density functional theory (DFT) computations. The polarized continuum (PCM) - solvation model was employed to describe the structural factors that govern the coordination modes of the ligands (mer or fac) in the solution. The differences in the binding enthalpies of the investigated complexes were discussed based on the results obtained both from the natural bond orbital (NBO) analysis and the second-order perturbation theory.     

Coulometric determination of nickel and cobalt

A method has been developed for the successive determinations of nickel and cobalt by controlled potential coulomctric analysis with a. mercury cathode, using an aqueous pyridine electrolyte, Quantitles of the metals from about 10 to l00 mg per 100 ml are determinable with an average error of ±0.5 mg. Because this controlled potential electrolysis technique produces a clean separation of nickel and cobalt it can be used for preparing nickel-free cobalt compounds and cobalt-free nickel compounds.     

2D and 3D supramolecular structures via hydrogen bonds and pi-stacking interactions in arylsulfonates of nickel and cobalt

Five novel arylsulfonates of Ni and Co have been hydrothermally obtained and their structures determined by X-ray single-crystal diffraction. [Ni(Phen)(H2O)](1,5-NDS).2H2O (1) is a hydrogen-bonded supramolecular layered compound formed by self-assembly of tetraaqua-o-phenanthrolinenickel(II) cations and 1,5-naphthalenedisulfonate anions, [Ni(Phen)2(H2O)(1,5-NDS)] (2) and [Ni(Phen)2(H2O)(2,6-NDS)].2H2O (4) exhibit 2D structures via O-H...O and pi-pi (both perfect face-to-face and parallel-displaced) stacking interactions, [Co(Phen)2(H2O)(1,5-NDS)].2H2O (5) presents a 3D structure via O-H...O hydrogen-bond layers and pi-pi parallel-displaced stacking interactions, and [Co(Phen)2(1,5-NDS)] (3) is the first example of a covalently bonded polymeric cobalt sulfonate. Its 1D structure comprises chains formed through bitopic 1,5-NDS linkers. Rates and selectivities for oxidation of organic sulfides with H2O2 were measured with 2-5.     

2-Pyridyloximate clusters of cobalt and nickel

The use of 2-pyridyloximate(-1) ligands, (py)C(R)NO⁻ [R = H, Ph, 2-pyridyl (py)] in cobalt and nickel(II) chemistry has been investigated and led to four families of clusters. A representative member of each family, namely $[{\mathrm{Co}}^{\text{II}}{\mathrm{Co}}_2^{\text{III}}\{(\mathrm{py})\mathrm{C}(\mathrm{ph})\text{NO}{\}}_6]({\mathrm{PF}}_6{)}_2$ (1), $[{\mathrm{Co}}_2^{\text{II}}{\mathrm{Co}}_2^{\mathrm{III}}(\mathrm{OH}{)}_2({\mathrm{O}}_2\mathrm{CMe}{)}_2\{(\mathrm{py}{)}_2\mathrm{CNO}{\}}_4(\mathrm{MeOH}{)}_2]({\mathrm{ClO}}_4{)}_2$ (2), [Ni₉(OH)₄{(py)CHNO}₁₀(H₂O)₈]{N(CN)₂}₃(ClO₄) [3{N(CN)₂}₃(ClO₄)] and [Ni₄(O₂CMe)₄{(py)C(ph)NO}₄(MeOH)₂] (4) is briefly structurally and magnetically described.     

Iron,cobalt and nickel violurate complexes

Summary The Fe^II, Fe^III, Co^II, Co^III and Ni^II violurates have been synthesised and their electronic spectra (in Nujol mulls and dimethyl formamide), i.r. spectra, magnetic properties, molar conductivity, differential thermal analysis (d.t.a.), thermogravimetric analysis (t.g.a.), elemental analysis, m.p., specific gravity and solubility have been recorded. The structures of the complexes have been inferred from magnetic and spectral data.     

Unsymmetrical dinuclear cobalt and nickel trimethylacetate complexes

The reaction of the dinuclear complex Co₂(-OOCCMe₃)₂(²-OOCCMe₃)₂bpy₂ (1) with the polymer [Co(OH) _n (OOCCMe₃)_2–n ] _x afforded the unsymmetrical dinuclear complex bpyCo₂(₂-O,²-OOCCMe₃)(₂-O,O"-OOCCMe₃)₂(²-OOCCMe₃) (2). The reaction of 2,2"-dipyridylamine with [Co(OH) _n (OOCCMe₃)_2–n ] _x gave rise to the analogous complex [(C₅H₄N)₂NH]Co₂(₂-O,²-OOCCMe₃)(-OOCCMe₃)₂(²-OOCCMe₃) (3). The reaction of complex 1 with Ni₄(₃-OH)₂(-OOCCMe₃)₄(OOCCMe₃)₂(MeCN)₂[²-o-C₆H₄(NH₂)(NHPh)]₂ (4) produced an isostructural heterometallic analog of complex 2 with composition bpyM₂(₂-O,²-OOCCMe₃)(₂-O,O"-OOCCMe₃)₂(²-OOCCMe₃) (5) (M = Co, Ni; Co : Ni = 1 : 1) and the dinuclear heterometallic complex bpy(HOOCCMe₃)M(-OH₂)(-OOCCMe₃)₂M(OOCCMe₃)₂[o-C₆H₄(NH₂)(NHPh)] (6) (M = Co, Ni; Co : Ni = 0.15 : 1.85). Compounds 2 and 5 exhibit ferromagnetic spin-spin exchange interactions.     

Substoichiometric masking-II Determination of traces of cobalt in nickel salts and metallic nickel

Cobalt is determined in the presence of large amounts of nickel by masking the latter substoichiometrically by addition of xxx 98% of the theoretically required amount of EDTA. The "free nickel" :cobalt ratio is thereby decreased below the critical value and the cobalt is extracted as the green cobalt(III)-PAN complex into chloroform. Small amounts of nickel-PAN formed are destroyed by a subsequent EDTA-hydrochloric acid treatment. The absorbance of the treated extract is measured at 635 mmu. Copper, zinc, cadmium and iron do not interfere in ratios (to cobalt) of 500:1, 100:1, 100:1 and 10:1, respectively.     

Electron-nucleus cusp correction and forces in quantum Monte Carlo

A simple method is presented which ensures the electron-nucleus cusp condition is satisfied by the Slater-Jastrow wavefunctions commonly employed in quantum Monte Carlo simulations. The method is applied in variational energy calculations of the neon atom and a selection of molecules using both Gaussian and Slater basis sets. In addition, we discuss the relationship between the electron-nucleus cusps and the variance of forces, and investigate the sensitivity of forces to the quality of the cusps for various diatomic molecules.     

Inorganic complexation of nickel and cobalt in natural waters

The distribution of nickel and cobalt species has been computed, based on the pH-dependent model of Zirino and Yamamoto. The media used in the pH range of 7 to 9 are natural waters like fresh water, sea water and a mixture of them at different compositions, at 25°C temperature and 1 atm pressure. In fresh water, both nickel and cobalt dominate as free cations at lower pH, and as carbonato complexes at higher pH. In sea water, chloro complexes are significant. In mixtures of the two kinds of water, as might be found in a totally mixed estuary, chloro complexes are important, varying slowly with pH. Sea water plays an important role in complexation. The present results are in excellent agreement with experimental data obtained by the resin exchange method.     

Polarographic separation of cobalt from nickel

Summary The polarographic behaviour of nickel and cobalt in the mixed base electrolytes, urea-pyridine and urea-hydrazine has been studied. The effect of p_H, concentration of supporting electrolyte and the presence of various other ions was investigated. Well defined polarograms for both the elements were obtained at p_H 6.0 and 5.0 respectively. Attempts were made to utilize these observations in the separation of the two cations. While the difference in E _1/2 of the ions in urea-pyridine was greater than –0.3 volts that in urea-hydrazine was about –0.2 volts or slightly less even under the optimum conditions. In a mixed solution the waves for Co and Ni were therefore well developed and separated in the former base electrolyte. The polarograms in urea-hydrazine were, however, of little analytical use because of the washing away of the Ni wave due to the presence of even small amounts of cobalt.

---

Zusammenfassung Das polarographische Verhalten von Nickel und Kobalt in Harnstoff-Pyridin- und Harnstoff-Hydrazinlösung wurde untersucht und der Einfluß des p_H-Wertes, der Leitsalzkonzentration sowie der Gegenwart verschiedener anderer Ionen festgestellt. Bei p_H 6,0 bzw. 5,0 wurden für beide Elemente gut ausgebildete Polarogramme erhalten. Es wurde versucht, die erhaltenen Ergebnisse zur Trennung der beiden Ionen zu benutzen. In Harnstoff-Pyridinlösung beträgt der Unterschied der beiden Halbstufenpotentiale mehr als –0,3 V und man erhält gut ausgebildete und voneinander getrennte Stufen. In Harnstoff-Hydrazinlösung dagegen beträgt der Unterschied nur –0,2 V oder etwas weniger, selbst unter optimaler Bedingungen, und die Ni-Stufe wird schon durch kleine Kobaltmengen beeinträchtigt.

     

Anion-exchange separation of cobalt from nickel

An anion-exchange method has been developed for the separation of cobalt from nickel, based on the observation that from a malonic acid solution containing sodium nitrite, cobalt is preferentially adsorbed by the exchanger but nickel passes through. The cobalt is eluted with 2M ammonium chloride in dilute ammonia solution. Prom an ammonium malonate solution containing chloride and nitrate, cobalt is quantitatively electro-deposited on a platinum cathode to give a bright, adherent deposit. Nickel is deposited from a solution of similar composition.     

Heat induced reactions in cobalt doped nickel oxinate

The purpose of this work is to study the chemical consequences of filiation ⁵⁷Ni → ⁵⁷Co → ⁵⁷Fe in a chelate matrix of nickel oxinate.⁵⁷Ni is produced by the ⁵⁸Ni(p, pn)⁵⁷Ni or ⁵⁶Fe(α, 3n)⁵⁷Ni reaction. The oxidation number of the ⁵⁷Co species formed by decay of ⁵⁷Ni in labelled Ni-oxinate is determined. Parallel to this the properties of ⁵⁷Co oxinate are investigated when the latter is incorporated in Ni-oxinate by coprecipitation.Both types of material have been heated and/or exposed to ionizing radiation. The results yield information on the solid state reactions occurring in both labelled and doped crystals.     

Octanuclear cobalt and nickel cages featuring formate ligands

Two new octanuclear cages are reported which feature formate as a bridging carboxylate which has been formed in situ from decomposition of triphenylacetate used as a ligand.     

Photodissociation of cobalt and nickel oxide cluster cations

Cobalt and nickel oxide cluster cations, Co(x)O(y)(+) and Ni(x)O(y)(+), are produced by laser vaporization of metal rods in a pulsed nozzle cluster source and detected using time-of-flight mass spectrometry. The mass spectra show prominent stoichiometries of x = y for Co(x)O(y)(+) along with x = y and x = y - 1 for Ni(x)O(y)(+). The cluster cations are mass selected and multiphoton photodissociated using the third harmonic (355 nm) of a Nd:YAG laser. Although various channels are observed, photofragmentation exhibits two main forms of dissociation processes in each system. Co(x)O(y)(+) dissociates preferentially through the loss of O(2) and the formation of cobalt oxide clusters with a 1:1 stoichiometry. The Co(4)O(4)(+) cluster seems to be particularly stable. Ni(x)O(y)(+) fragments reveal a similar loss of O(2), although they are found to favor metal-rich fragments with stoichiometries of Ni(x)O(x-1). The Ni(2)O(+) fragment is produced from many parent ions. The patterns in fragmentation here are not nearly as strong as those seen for early or mid-period transition-metal oxides studied previously.     

Anion-exchange separation of iron,cobalt and nickel

From 90% acetone-10% 6 M hydrochloric acid medium, cobalt and nickel are strongly adsorbed on the anion-exchange resin Dowex I-X8; iron is not adsorbed and can thus be separated from cobalt and nickel. Cobalt and nickel are then separated by elution with 70% acetone-30% 2 M hydrochloric acid; nickel is eluted before cobalt. The method can be applied to the determination of nickel and cobalt in materials with high iron content such as steels ; compleximetric titrations are used for the final step.     

Determination of nickel and cobalt by radiochemical displacement

A radiochemical displacement method has been developed for the determination of nickel and cobalt based on the release of Zn-65 from labelled Zn(PAN)₂ [1-(2-pyridylazo) 2-naphthol] complex in chloroform. The displacement behavior of Zn-65 by nickel and cobalt was studied in the pH range 5–7.5. The effect of various ions on the displacement was also examined. 2–20 g of nickel and cobalt was determined by the aid of calibration plots.     

Iron,cobalt and nickel complexes of pyridines

Summary Syntheses, chemical reactivity, physicochemical properties and applications of iron, cobalt and nickel complexes of pyridines are presented.