Zn,O共掺杂实现p型AlN的第一性原理研究

基于密度泛函理论(density functional theory),采用第一性原理平面波超软赝势法,研究了纤锌矿AlN,Zn掺杂和Zn,O共掺杂AlN的晶体结构、能带、电子态密度、差分电荷分布及电荷布居数.计算结果表明:Zn,O共掺杂方法中引入激活施主O原子,能使受主能级向低能方向移动,形成了浅受主能级.同时,受主能带变宽、非局域化特征明显、从而提高了Zn原子的掺杂浓度和系统的稳定性.Zn,O共掺杂更有利于获得p型AlN. 关键词： 第一性原理 AlN 电子结构 p型共掺杂     

Be, O共掺杂实现p型AlN的第一性原理研究

基于密度泛函理论框架下的第一性原理平面波超软赝势方法,研究了掺杂和非掺杂AlN体系的晶格参数、 能带结构、总体态密度、分波态密度、差分电荷分布及电荷集居数.计算结果表明: Be掺杂AlN晶体能够在能隙中形成深受主能级,空穴载流子局域于价带顶, 而引入了激活施主O原子的Be, O共掺杂方法,能使受主能带变宽、非局域化特征明显. 同时,受主能级向低能方向移动,形成了浅受主能级, 从而提高了Be原子的掺杂浓度和系统的稳定性. Be, O共掺杂更有利于获得p型AlN.     

Mg,O共掺杂实现p型AlN的第一性原理研究

采用密度泛函理论下的第一性原理平面波超软赝势方法研究了纤锌矿本征AlN,Mg单掺杂AlN和Mg,O共掺杂AlN体系的晶格参数、能带结构、电子态密度、差分电荷密度及电子布居数.计算结果显示:在Mg,O共掺杂AlN体系中,激活施主O原子的引入能使受主能级降低,形成浅受主掺杂.同时,体系的非局域化特征显著,受主能带变宽.因而提高了Mg原子的受主掺杂浓度和系统的稳定性.Mg,O共掺杂更有利于制备p型AlN.     

Nb-X(X=Y,Zr)共掺杂SnO_2电子结构的第一性原理研究

本文采用第一性原理方法研究了Nb-X(X=Y,Zr)共掺杂SnO_2能带结构与态密度,探讨了其磁性产生的机理.研究结果表明,Nb-Y共掺杂SnO_2体系自旋向上和自旋向下的能带、态密度完全对称,总磁矩为0μB;Nb-Zr共掺杂的SnO_2体系自旋向上和自旋向下的能带与态密度在费米能级处都出现了不对称的情况,出现耦合现象,其总磁矩为0.933μB;分析Nb-Y共掺杂SnO_2的能带结构与态密度得到自旋向上和自旋向下的能带禁带中的4条杂质能级来源于Nb-Y共掺杂SnO_2电子的施主与受主能级;NbZr共掺杂SnO_2体系产生磁性的原因在于Nb和Zr的d轨道的引入.     

铝氮共掺杂氧化锌纳米管电子结构的第一性原理研究

采用基于密度泛函理论的第一性原理计算, 对(6,0)单壁氧化锌纳米管、铝掺杂、氮掺杂和铝氮共掺杂纳米管的能带结构、态密度和差分电荷密度进行了研究. 结果表明, 氮掺杂可以在纳米管禁带中引入受主能级, 实现纳米管的p型掺杂, 但是受主能级局域性较强, 导致氮溶解度低. 引入铝元素可以有效降低氮形成受主能级局域性, 激活氮元素, 铝氮共掺杂有望成为氧化锌纳米管一种更为有效的p型掺杂方法. 关键词： 氧化锌纳米管 电子结构 共掺杂 第一性原理计算     

Mg和Zn掺杂CuAlS2电子结构的分析

从能带结构和态密度分析了黄铜矿CuAlS₂的电子结构.对比未掺杂CuAlS₂,从晶体结构、电子结构、电荷密度分布讨论了Mg和Zn替位Al掺杂对CuAlS₂的影响.结果表明:Mg和Zn掺杂CuAlS₂都导致晶格常数增大,Mg掺杂晶胞体积增大更多;掺杂在价带顶引入受主态,形成p型电导;Mg掺杂比Zn掺杂的受主能级电离能略小;而Zn掺杂CuAlS₂体系总能更低,晶格结构更稳定. 关键词： 2')" href="#">CuAlS₂ p型掺杂 电子结构 能带结构     

In-N共掺杂ZnO第一性原理计算

采用基于密度泛函理论(DFT)的第一性原理平面波超软赝势方法计算了纤锌矿ZnO,N掺杂和In-N共掺杂ZnO晶体的电子结构,分析了N掺杂和In-N共掺杂ZnO晶体的能带结构、电子态密度、差分电荷分布以及H原子对In-N共掺杂ZnO的影响.计算结果表明：N掺杂ZnO在能隙中引入了深受主能级,载流子(空穴)局域于价带顶附近.而加入激活施主In的In-N共掺杂ZnO,受主能级向低能方向移动,形成了浅受主能级.同时,受主能级带变宽、非局域化特征明显、提高了掺杂浓度和系统的稳定性.文章的结论与实验结果相符,从而为实 关键词： 密度泛函理论(DFT) 第一性原理 N掺杂ZnO In-N共掺杂ZnO     

K-2N双受主共掺杂P型ZnO的第一性原理研究

本文采用基于第一性原理的密度泛函理论(DFT)平面波超软赝势方法,计算了未掺杂ZnO和K,K-2N掺杂ZnO体系的晶体结构、能带、电子态密度与光学性质.研究表明:K掺杂ZnO体系,带隙变宽,在费米能级附近引入了较浅的受主能级,费米能级进入到价带中.而K-2N共掺杂体系中,带隙变窄,形成了浅受主能级,这个对改善ZnO的p...     

Al、N共掺杂实现p-型ZnS的第一性原理研究

 采用基于密度泛函理论的第一性原理平面波超软赝势方法,计算了闪锌矿ZnS、N掺杂以及Al、N共掺杂ZnS晶体的电子结构,分析了N掺杂以及Al和N共掺杂ZnS晶体的能带结构、电子态密度以及Mulliken电荷分布。计算结果表明：N掺杂ZnS在能带中引入了深受主能级,N原子的2p态在价带顶提供了空穴载流子,载流子局域于价带顶附近;Al和N共掺使得受主能级变宽,非局域化特征明显,提高了掺杂浓度和系统的稳定性,更加有利于获得p-型ZnS。     

掺杂Fe、F对ZnO电子结构和光学性质的影响

本文采用密度泛函理论框架下的第一性原理平面波超软赝势法,建立了Zn16O16、Zn15Fe1O16、Zn16O15F1、Zn15Fe1O15F1超晶胞,对掺杂前后ZnO超晶胞的能带结构分布、光学性质进行了计算与分析。计算结果表明：共掺杂Fe、F体系的形成能比单掺杂更小,稳定性更高;共掺杂体系的共价性最弱,更利于光生电子-空穴对的分离,且共掺杂体系的杂质能级数变得更为密集,电子更容易从低能级跃迁到高能级,进而提高光催化活性;Fe3+的掺入导致费米能级进入导带,产生莫特相变,使之导电性增强;共掺杂体系的介电函数虚部向低能方向移动,在可见光区域的吸收峰值明显增大,说明Fe、F共掺杂是一种很好的光催化材料。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.