Effects of subtle differences in ligand constitution and conformation in metallo-supramolecular self-assembled polygons

3,3'-Bis(pyridin-[n]-ylethynyl)biphenyl (n = 3, 4) and the corresponding 2,2'-bipyridines assemble with (dppp)Pt(II) triflate into metallo-supramolecular polygons. Depending on the position of the terminal pyridine N atoms, the assembly reaction leads to different equilibrium products. With the slow ligand exchange on Pt(II) complexes, the equilibrium is reached on a many-hour time-scale. During the assembly process, larger polygons form under kinetic control. This was confirmed by time-dependent (1)H and (31)P NMR spectroscopy in line with complementary ESI mass spectrometric experiments. The constitutional difference in the pyridine N-atom position is reflected in the tandem mass spectra of the complex ions. In addition, a highly specific fragmentation process of mass-selected M(3)L(3) ions was observed, which proceeds through a ring contraction yielding smaller M(2)L(2) ions.     

Parahydrogen studies of H2 addition to Ir(I) complexes containing chiral phosphine-thioether ligands: implications for catalysis

Ir(CO)[CpFe{eta5-C5H3(PPh2)CH2SR}]Cl [R = Ph and (t)Bu], containing a kappa2:P,S ligand, undergoes H2 addition across the S-Ir-CO axis under kinetic control to form two distinct diastereoisomeric products, which then rearrange via S dissociation in a process that can be hijacked for useful catalysis, but ultimately form a single diastereoisomer of the thermodynamic product where the hydride ligands are trans to chloride and phosphine.     

Ni0-catalyzed cyclotrimerization of 1,3-butadiene: a comprehensive density functional investigation on the origin of the selectivity

A comprehensive theoretical investigation of the mechanism for the Ni(0)-catalyzed cyclotrimerization of 1,3-butadiene by the [Ni(0)(eta(2)-butadiene)(3)] active catalyst complex is presented by employing a gradient-corrected DFT method. All critical elementary processes of the catalytic cycle have been scrutinized, namely, oxidative coupling of two butadienes, butadiene insertion into the allyl-Ni(II) bond, allylic isomerization in both octadienediyl-Ni(II) and dodecatrienediyl-Ni(II) species, and reductive elimination under ring closure. For each of these elementary steps several conceivable routes and also the different stereochemical pathways have been probed. The favorable route for oxidative coupling start from the prevalent [Ni(0)(eta(2)-butadiene)(3)] form of the active catalyst through coupling between the terminal non-coordinated carbon atoms of two reactive eta(2)-butadiene moieties; this is assisted by an ancillary butadiene in eta(2)-mode. The initial eta(3),eta(1)(C(1))-octadienediyl-Ni(II) product is the active precursor for subsequent butadiene insertion, which preferably takes place into the eta(3)-allyl-Ni(II) bond. The insertion is driven by a strong thermodynamic force. Therefore, the dodecatrienediyl-Ni(II) products, with the most favorable bis(eta(3)-allyl),Delta-trans isomers in particular, represent a thermodynamic sink. Commencing from a preestablished equilibrium between the various bis(eta(3)-allyl),Delta-trans forms of the [Ni(II)(dodecatrienediyl)] complex, the major cyclotrimer products, namely all-t-CDT, c,c,t-CDT and c,t,t-CDT, are formed along competing paths by reductive elimination under ring closure, which is shown to be rate-controlling. The all-c-CDT-generating path is completely precluded by both thermodynamic and kinetic factors, giving rise to negligibly populated bis(eta(3)-allyl),Delta-cis precursor isomers. The regulation of the selectivity of the CDT formation as well as the competition between the two reaction channels for generation of C(12)- and C(8)-cycloolefins is elucidated.     

Autocatalytic alkyne cycloadditions: evidence for colloidal Pt catalysis

Treatment of the four-membered platinacycle L2Pt(1,8-naphthalendiyl) (1) or the five-membered platinacycle L2Pt(1,12-triphenylendiyl) with excess PhCCPh at 120-150 degrees C gives the coupling products 1,2-diphenylacenaphthalene or 4,5-diphenylbenzo[e]pyrene and the alkyne complex L2Pt(eta2-PhCCPh). Both reactions show an accelerating rate, which has been traced to catalysis of the reaction by colloidal platinum formed by the reaction of O2 with L2Pt(eta2-PhCCPh).     

Ligand-induced haptotropic rearrangements in bis(indenyl)zirconium sandwich complexes

Addition of principally sigma-donating ligands such as THF, chelating diethers, or 1,2-bis(dimethyl)phosphinoethane to eta(9),eta(5)-bis(indenyl)zirconium sandwich complexes, (eta(9)-C(9)H(5)-1,3-R(2))(eta(5)-C(9)H(5)-1,3-R(2))Zr (R = alkyl or silyl), induces haptotropic rearrangement to afford (eta(6)-C(9)H(5)-1,3-R(2))(eta(5)-C(9)H(5)-1,3-R(2))ZrL adducts. Examples where L = THF and DME have been characterized by X-ray diffraction and revealed significant buckling of the eta(6) benzo ring, consistent with reduction of the arene, and highlight the importance of the zirconium(IV) canonical form. For the THF-induced haptotropic rearrangements, the thermodynamic driving force for ring migration has been measured as a function of indenyl substituent and demonstrates silylated sandwiches favor THF coordination and the eta(6),eta(5) bonding motif over their alkylated counterparts. In the case of chelating diethers, measurement of the corresponding equilibrium constants establish more stable eta(6),eta(5) adducts with five- over four-membered chelates and with smaller oxygen and carbon backbone substituents. Kinetic studies on both THF and DME addition to (eta(9)-C(9)H(5)-1,3-(SiMe(3))(2))(eta(5)-C(9)H(5)-1,3-(SiMe(3))(2))Zr established a first-order dependence on the incoming ligand, consistent with a mechanism involving direct attack of the incoming nucleophile on the eta(9),eta(5) sandwich. These results further highlight the ability of the indenyl ligand to smoothly adjust hapticity to meet the electronic requirements of the metal center.     

Cleavage of carbon-carbon bonds of diphenylacetylene and its derivatives via photolysis of Pt complexes: tuning the C-C bond formation energy toward selective C-C bond activation

Carbon-carbon bond activation of diphenylacetylene and several substituted derivatives has been achieved via photolysis and studied. Pt0-acetylene complexes with eta2-coordination of the alkyne, along with the corresponding PtII C-C activated photolysis products, have been synthesized and characterized, including X-ray crystal structural analysis. While the C-C cleavage reaction occurs readily under photochemical conditions, thermal activation of the C-C bonds or formation of PtII complexes was not observed. However, the reverse reaction, C-C reductive coupling (PtII --> Pt0), did occur under thermal conditions, allowing the determination of the energy barriers for C-C bond formation from the different PtII complexes. For the reaction (dtbpe)Pt(-Ph)(-CCPh) (2) --> (dtbpe)Pt(eta2-PhCCPh) (1), DeltaG was 32.03(3) kcal/mol. In comparison, the energy barrier for the C-C bond formation in an electron-deficient system, that is, (dtbpe)Pt(C6F5)(CCC6F5) (6) --> (dtbpe)Pt(eta2-bis(pentafluorophenyl)acetylene) (5), was found to be 47.30 kcal/mol. The energy barrier for C-C bond formation was able to be tuned by electronically modifying the substrate with electron-withdrawing or electron-donating groups. Upon cleavage of the C-C bond in (dtbpe)Pt(eta2-(p-fluorophenyl-p-tolylacetylene) (9), both (dtbpe)Pt(p-fluorophenyl)(p-tolylacetylide) (10) and (dtbpe)Pt(p-tolyl)(p-fluorophenylacetylide) (11) were obtained. Kinetic studies of the reverse reaction confirmed that 10 was more stable toward the reductive coupling [the term "reductive coupling" is defined as the formation of (dtbpe)Pt(eta2-acetylene) complex from the PtII complex] than 11 by 1.22 kcal/mol, under the assumption that the transition-state energies are the same for the two pathways. The product ratio for 10 and 11 was 55:45, showing that the electron-deficient C-C bond is only slightly preferentially cleaved.     

Synthesis and chemistry of zwitterionic tantala-3-boratacyclopentenes: olefin-like reactivity of a borataalkene ligand

The compounds, where Cp' = C(5)H(5), a series, and C(5)H(4)Me, b series, are generated via treatment of with HB(C(6)F(5))(2). When allowed to undergo irreversible methane loss in the presence of an excess of the sterically modest alkynes 2-butyne or phenylacetylene, the putative intermediates 1a and 1b are trapped as the tantala-3-boratacyclopentene compounds 2 and 3, respectively. In these complexes, the alkyne and borataalkene ligands have reductively coupled at the d(2) tantalum center. For the unsymmetrical alkyne, a kinetic product resulting from coupling in the opposite regiochemical sense is observed; the thermodynamic products 3-t incorporate the phenyl group in the alpha position of the tantalaboratacyclic ring. Two of these compounds (2b and 3b-t) were characterized crystallographically. For bulkier alkynes (diphenylacetylene, 1-phenyl-1-propyne, and 3-hexyne), intermediates with similar spectroscopic properties to the tantala-3-boratacyclopentenes were observed, but the ultimate products were the vinylalkylidene compounds 5-(R,R'). Compound 5-(Ph,Me) was characterized crystallographically, and it was found that the vinylalkylidene binds to the metal in an eta(1)-bonding mode, with the tantalum center receiving further ligation through a hydridoborate moiety. Mechanistic studies suggest that these products arise via retrocyclization of the tantala-3-boratacyclopentenes formed kinetically. These studies represent the first studies concerning the reactivity of a borataalkene ligand at a transition metal center and show that it can behave in an "olefin-like" manner, despite having a more flexible array of bonding modes available to it than an olefin.     

"Oxidatively induced" reductive elimination of dioxygen from an eta2-peroxopalladium(II) complex promoted by electron-deficient alkenes

The first example of associative displacement of dioxygen from a peroxopalladium(II) complex is reported. Electron-deficient alkenes, p-X-trans-beta-nitrostyrene (X = OCH3, CH3, H, F, Br, CF3, NO2), react quantitatively with (bc)Pd(eta2-O2) (bc = bathocuproine) in dichloromethane at room temperature to form the corresponding palladium(0)-alkene complexes. Mechanistic studies indicate that ligand substitution proceeds through an associative mechanism, and the electronic characteristics of the reactions are consistent with an "oxidatively induced" reductive elimination pathway.     

Organometallic building blocks with amino-substituted cyclopentadienyl and boratabenzene ligands for the synthesis of heterometallic complexes and clusters

A comparative study of the reactivity of isolobal rhenium and molybdenum carbonylmetallates containing a borole, in [Re(eta5-C4H4BPh)(CO)3]- (2), a boratanaphthalene, in [Mo(eta5-2,4-MeC9H6BMe)(CO)3]- (4a) and [Mo(eta5-2,4-MeC9H6BNi-Pr2)(CO)3]- (4b), a boratabenzene, in [Mo(eta5-3,5-Me2C5H3BNi-Pr2)(CO)3]- (6) or a dimethylaminocyclopentadienyl ligand, in [Mo(eta5-C5H4NMe2)(CO)3]- (7), toward palladium(II), gold(I), mercury(II) and platinum(II) complexes has allowed an evaluation of the role of these pi-bonded ligands on the structures and unprecedented coordination modes observed in the resulting metal-metal bonded, heterometallic complexes. The new metallate 6 was reacted with [AuCl(PPh3)], and with 1 or 2 equiv. HgCl2, which afforded the new heterodinuclear complexes [Au{Mo(eta5-3,5-Me2C5H3BNi-Pr2)(CO)3}(PPh3)] (Mo-Au) (10) and [Hg{Mo(eta5-3,5-Me2C5H3BNi-Pr2)(CO)3}Cl] (Hg-Mo) (11) and the heterometallic chain complex [Hg{Mo(eta5-3,5-Me2C5H3BNi-Pr2)(CO)3}2] (Mo-Hg-Mo) (12), respectively. Reactions of the new metallate 7 with HgCl2, trans-[PtCl2(CNt-Bu)2] and trans-[PtCl2(NCPh)2] yielded the heterodinuclear complex [Hg{Mo(eta5-C5H4NMe2)(CO)3}Cl] (Mo-Hg) (15), the heterotrinuclear chain complexes trans-[Pt{Mo(eta5-C5H4NMe2)(CO)3}2(CNt-Bu)2] (Mo-Pt-Mo) (16) and trans-[Pt{Mo(eta5-C5H4NMe2)(CO)3}2(NCPh)2] (Mo-Pt-Mo) (17), the mononuclear complex [Mo(eta5-C5H4NMe2)(CO)3Cl] (18), the lozenge-type cluster [Mo2Pt2(eta5-C5H4NMe2)2(CO)8] (19) and the heterodinuclear complex [[upper bond 1 start]Pt{Mo(eta5-C5H4N[upper bond 1 end]Me2)(CO)3}(NCPh)Cl](Mo-Pt) (20), respectively. The complexes 11, 16, 17.2THF, 18 and 20 have been structurally characterized by X-ray diffraction and 20 differs from all other compounds in that the dimethylaminocyclopentadienyl ligand forms a bridge between the metals.     

Atropisomerization, C-H activation, and dissociative substitution at some biphenyl platinum(II) complexes

The reaction of 2,2'-dilithiumbiphenyl with cis-[PtCl(2)(SEt(2))(2)] at -10 degrees C in diethyl ether not only leads to the main product [Pt(2)(micro-SEt(2))(2)(bph)(2)], containing the planar 2,2'-biphenyl dianion (bph(2)(-)), but also forms a new dinuclear platinum(II) compound of formula [Pt(2)(micro-SEt(2))(2)(Hbph)(4)], 1a (Hbph(-) = eta(1)-biphenyl monoanion), in which each metal is in a square-planar environment. NMR spectroscopy and molecular mechanics (MMFF) calculations were used to characterize 1a. The results suggest that the favored conformation for the four Hbph biphenyl groups is alphabetabetaalpha. In chloroform solution, 1a undergoes atropisomerization to 1b (alphabetaalphabeta) (k(is) = 1.03 x 10(-)(4) s(-)(1), at 298 K) that subsequently cyclometalates (k(obs) = 4.48 x 10(-)(6) s(-)(1), at 298 K) to yield [Pt(2)(micro-SEt(2))(2)(bph)(2)] and biphenyl. Both processes, atropisomerization and C-H activation, presumably involve preliminary thioether bridge splitting. The dinuclear complex 1a has been shown to be a versatile and useful precursor to a variety of mononuclear eta(1)-biphenyl platinum(II) complexes. By reaction with diethyl sulfide, dimethyl sulfoxide, or with rigid dinitrogen containing ligands, such as 2,2'-bipyridine or 1,10-phenanthroline, complexes cis-[Pt(Hbph)(2)(dmso)(2)] 3, cis-[Pt(Hbph)(2)(SEt(2))(2)] 4, [Pt(Hbph)(2)(bpy)] 5, and [Pt(Hbph)(2)(phen)] 6 were obtained, respectively. The crystal structures of compounds 5 and 6 were determined. Only the head-to-tail isomer of these compounds was recognized in the solid state and in solution, where restricted rotation around the Pt-C bond prevents interconversion to the head-to-head form. A detailed kinetic study of ligand (dmso) exchange and substitution (by 2,2'-bipyridine and 1,10-phenanthroline) has been performed on complex 3 in CDCl(3) and toluene-d(8) by (1)H NMR magnetization transfer experiments, and in toluene by UV/vis spectroscopy, respectively. The rates of both processes show no dependence on ligand concentration, the rate of ligand substitution being in reasonable agreement with that of ligand exchange at the same temperature. The kinetics are characterized by largely positive entropies of activation. The results are consistent with a dissociative mode of activation analogous to the pattern already found for compounds with a similar [Pt(C,C)(S,S)] set of coordinating ligands. The role of ML(3) d(8) T-shaped 14-electron species, as elusive reaction intermediates or structurally characterized compounds, is discussed.     

Palladium(II) and platinum(II) complexes with tridentate iminophosphine ligands; synthesis and structural studies

The previously synthesised Schiff-base ligands 2-(2-Ph(2)PC(6)H(4)N[double bond, length as m-dash]CH)-R'-C(6)H(3)OH (R'= 3-OCH(3), HL(1); 5-OCH(3), HL(2); 5-Br, HL(3); 5-Cl, HL(4)) were prepared by a faster, more efficient route involving a microwave assisted co-condensation of 2-(diphenylphosphino)aniline with the appropriate substituted salicylaldehyde. HL(1-4) react directly with M(II)Cl(2)(M = Pd, Pt) or Pt(II)I(2)(cod) affording neutral square-planar complexes of general formula [M(II)Cl(eta(3)-L(1-4))](M = Pd, Pt, 1-8) and [Pt(II)I(eta(3)-L(1-4))](M = Pd, Pt, 9-12). Reaction of complexes 1-4 with the triarylphosphines PR(3)(R = Ph, p-tolyl) gave the novel ionic complexes [Pd(II)(PR(3))(eta(3)-L(1-4))]ClO(4)(13-20). Substituted platinum complexes of the type [Pt(II)(PR(3))(eta(3)-L(1-4))]ClO(4)(R = P(CH(2)CH(2)CN)(3)21-24) and [Pt(II)(P(p-tolyl)(3))(eta(3)-L(3,4))]ClO(4)( 25 and 26 ) were synthesised from the appropriate [Pt(II)Cl(eta(3)-L(1-4))] complex (5-8) and PR(3). The complexes are characterised by microanalytical and spectroscopic techniques. The crystal structures of 3, 6, 10, 15, 20 and 26 were determined and revealed the metal to be in a square-planar four-coordinate environment containing a planar tridentate ligand with an O,N,P donor set together with one further atom which is trans to the central nitrogen atom.     

AlMe3-promoted oxidative cyclization of eta2-alkene and eta2-ketone on nickel(0). Observation of intermediate in methyl transfer process

AlMe3 can promote the oxidative cyclization of eta2-alkene and eta2-ketone on nickel(0) to give an intriguing nickel-aluminum dinuclear complex having a bridging methyl group, which might be an intermediate for the nickel-catalyzed cycloisomerization of o-allylacetophenone or o-allylbenzophenone.     

Synthesis and characterisation of triselenocarbonate [CSe3]2- complexes

[Pt(CSe3)(PR3)2] (PR3= PMe3, PMe2Ph, PPh3, P(p-tol)3, 1/2 dppp, 1/2 dppf) were all obtained by the reaction of the appropriate metal halide containing complex with carbon diselenide in liquid ammonia. Similar reaction with [Pt(Cl)2(dppe)] gave a mixture of triselenocarbonate and perselenocarbonate complexes. [{Pt(mu-CSe3)(PEt3)}4] was formed when the analogous procedure was carried out using [Pt(Cl)2(PEt3)2]. Further reaction of [Pt(CSe3)(PMe2Ph)2] with [M(CO)6] (M = Cr, W, Mo) yielded bimetallic species of the type [Pt(PMe2Ph)2(CSe3)M(CO)5] (M = Cr, W, Mo). The dimeric triselenocarbonate complexes [M{(CSe3)(eta5-C5Me5)}2] (M = Rh, Ir) and [{M(CSe3)(eta6-p-MeC6H4(i)Pr)}2] (M = Ru, Os) have been synthesised from the appropriate transition metal dimer starting material. The triselenocarbonate ligand is Se,Se' bidentate in the monomeric complexes. In the tetrameric structure the exocyclic selenium atoms link the four platinum centres together.     

Chemistry and electrochemistry of the heterodinuclear complex ClPd(dppm)2PtCl: a M-M' bond providing site selectivity

The heterodinuclear d(9)-d(9) title compound 1, whose crystal structure has been solved, reacts with dppm [bis(diphenylphosphino)methane] in the presence of NaBF4 to generate the salt [ClPd(mu-dppm)2Pt(eta(1)-dppm)][BF4] (2a), which contains a Pt-bound dangling dppm ligand. 2a has been characterized by 1H and 31P NMR, Fourier transform Raman [nu(Pd-Pt) = 138 cm(-1)], and UV-vis spectroscopy [lambda(max)(dsigma-dsigma*) = 366 nm]. In a similar manner, [ClPd(mu-dppm)2Pt(eta(1)-dppm=O)][BF4] (2b), ligated with a dangling phosphine oxide, has been prepared by the addition of dppm=O. The molecular structure of 2b has been established by an X-ray diffraction study. 2a reacts with 1 equiv of NaBH4 to form the platinum hydride complex [(eta(1)-dppm)Pd(mu-dppm)2Pt(H)][BF4] (3). Both 2a and 3 react with an excess of NaBH4 to provide the mixed-metal d(10)-d(10) compound [Pd(mu-dppm)3Pt] (4). The photophysical properties of 4 were studied by UV-vis spectroscopy [lambda(max)(dsigma-dsigma*) = 460 nm] and luminescence spectroscopy (lambda(emi) = 724 nm; tau(e) = 12 +/- 1 micros, 77 K). The protonation of 1 and 4 leads to [ClPd(mu-dppm)2(mu-H)PtCl]+ (5) and 3, respectively. Stoichiometric treatment of 1 with cyclohexyl or xylyl isocyanide yields [ClPd(mu-dppm)2Pt(CNC6H11)]Cl (6a) and [ClPd(mu-dppm)2Pt(CN-xylyl)]Cl (6b) ligated by terminal-bound CNR ligands. In contrast, treatment of 1 with the phosphonium salt [C[triple bond]NCH2PPh3]Cl affords the structurally characterized A-frame compound [ClPd(mu-dppm)2(mu-C=NCH2PPh3)PtCl]Cl (6c), spanned by a bridging isocyanide ligand. The electrochemical reduction of 2a at -1.2 V vs SCE, as well as the reduction of 5 in the presence of dppm, leads to a mixture of products 3 and 4. Further reduction of 3 at -1.7 V vs SCE generates 4 quantitatively. The reoxidation at 0 V of 4 in the presence of Cl- ions produces back complex 2a. The whole mechanism of the reduction of 1 has been established.     

Mono- and diprotonation of the superbasic bisguanidine 1,2-Bis(N,N,N',N'-tetramethylguanidino)benzene (btmgb) and Pt II and Pt IV complexes of chelating bisguanidines and guanidinates

New Pt complexes of chelating bisguanidines and guanidinate ligands were synthesized and characterized. 1,2-Bis(N,N,N',N'-tetramethylguanidino)benzene (btmgb) was used as a neutral chelating bisguanidine ligand, and 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidinate (hpp(-)) as a guanidinate ligand. The salts [btmgbH](+)[HOB(C(6)F(5))(3)](-) and [btmgbH(2)]Cl(2) and the complexes [(btmgb)PtCl(2)], [(btmgb)PtCl(dmso)](+)[PtCl(3)(dmso)](-), and [(btmgb)PtCl(dmso)](+)[Cl(-)] were synthesized and characterized. In the [btmgbH](+) cation the proton is bound to only one N atom. In the other complexes, both imine N atoms are coordinated to the Pt(II), thus adopting a eta(2)-coordinational mode. The hpp(-) anion, which usually prefers a bridging binding mode in dinuclear complexes, is eta(2)-coordinated in the Pt(IV) complex [(eta(2)-hpp)(hppH)PtCl(2){N(H)C(O)CH(3)}], which is formed (in low yield) by reaction between cis-[(hppH)(2)PtCl(2)] and H(2)O(2) in CH(3)CN.     

Experimental and theoretical examination of C-CN and C-H bond activations of acetonitrile using zerovalent nickel

Experimental and density functional theory show that the reaction of acetonitrile with a zerovalent nickel bis(dialkylphosphino)ethane fragment (alkyl = methyl, isopropyl) proceeds via initial exothermic formation of an eta(2)-nitrile complex. Three well-defined transition states have been found on the potential energy surface between the eta(2)-nitrile complex and the activation products. The lowest energy transition state is an eta(3)-acetonitrile complex, which connects the eta(2)-nitrile to a higher energy eta(3)-acetonitrile intermediate with an agostic C-H bond, while the other two lead to cleavage of either the C-H or the C-CN bonds. Gas-phase calculations show C-CN bond activation to be endothermic, which contradicts the observation of thermal C-CN activation in THF. Therefore, the effect of solvent was taken into consideration by using the polarizable continuum model (PCM), whereupon the activation of the C-CN bond was found to be exothermic. Furthermore the C-CN bond activation was found to be favored exclusively over C-H bond activation due to the strong thermodynamic driving force and slightly lower kinetic barrier.     

Synthesis and characterisation of cyanodithioimidocarbonate [C2N2S2]2- complexes

[PPh4]2[M(C2N2S2)2](M = Pt, Pd) and [Pt(C2N2S2)(PR3)2](PR3= PMe2Ph, PPh3) and [Pt(C2N2S2)(PP)](PP = dppe, dppm, dppf) were all obtained by the reaction of the appropriate metal halide containing complex with potassium cyanodithioimidocarbonate. The dimeric cyanodithioimidocarbonate complexes [[Pt(C2N2S2)(PR3)]2](PR3 = PMe2Ph), [M[(C2N2S2)(eta5-C5Me5)]2](M = Rh, Ir)and [[Ru(C2N2S2)(eta6-p-MeC6H4iPr)]2] have been synthesised from the appropriate transition metal dimer starting material. The cyanodithioimidocarbonate ligand is S,S and bidentate in the monomeric complexes with the terminal CN group being approximately coplanar with the CS2 group and trigonal at nitrogen thus reducing the planar symmetry of the ligand. In the dimeric compound one of the sulfur atoms bridges two metal atoms with the core exhibiting a cubane-like geometry.     

Why platinum catalysts involving ligands with large bite angle are so efficient in the allylation of amines: design of a highly active catalyst and comprehensive experimental and DFT study

The platinum-catalyzed allylation of amines with allyl alcohols was studied experimentally and theoretically. The complexes [Pt(eta(3)-allyl)(dppe)]OTf (2) and [Pt(eta(3)-allyl)(DPP-Xantphos)]PF(6) (5) were synthesized and structurally characterized, and their reactivity toward amines was explored. The bicyclic aminopropyl complex [Pt(CH(2)CH(2)CH(2)NHBn-kappa-C,N)(dppe)]OTf (3) was obtained from the reaction of complex 2 with an excess of benzylamine, and this complex was shown to be a deactivated form of catalyst 2. On the other hand, reaction of complex 5 with benzylamine and allyl alcohol led to formation of the 16-VE platinum(0) complex [Pt(eta(2)-C(3)H(5)OH)(DPP-Xantphos)] (7), which was structurally characterized and appears to be a catalytic intermediate. A DFT study showed that the mechanism of the platinum-catalyzed allylation of amines with allyl alcohols differs from the palladium-catalyzed process, since it involves an associative ligand-exchange step involving formation of a tetracoordinate 18-VE complex. This DFT study also revealed that ligands with large bite angles disfavor the formation of platinum hydride complexes and therefore the formation of a bicyclic aminopropyl complex, which is a thermodynamic sink. Finally, a combination of 5 and a proton source was shown to efficiently catalyze the allylation of a broad variety of amines with allyl alcohols under mild conditions.     

Operationally unsaturated pincer/rhenium complexes form metal carbenes from cycloalkenes and metal carbynes from alkanes

Operationally unsaturated (i.e., 16/18-electron) (PNPR)Re(H)4, where PNPR is N(SiMe2CH2PR2)2, is reactive at 22 degrees C with cyclic olefins. The first observed products are generally (PNPR)Re(H)2(cycloalkylidene), with hydrogenated olefin as the product of hydrogen abstraction from the tetrahydride. The tetrahydride complex with R = tBu generally fails to react (too bulky), that with R = cyclohexyl suffers a (controllable) tendency to abstraction of 3H from one ring, forming an eta3-cyclohexenyl compound, and that with R = iPr generally gives the richest bimolecular reactivity. The cyclic monoolefins studied show distinct reactivity, C6 giving first the carbene and then coordinated cyclohexadiene, C5 giving carbene, then diene, and then eta5-C5H5, C8 giving carbene and then eta2-cyclooctyne, and C12 giving an eta3-allyl. Norbornene gives a pi-complex of the norbornene in thermal equilibrium with its carbene isomer; at 90 degrees C, hydrocarbon ligand Calpha-Cbeta bond cleavage occurs to give, for the first time, a carbyne complex from an internal olefin. Two compounds synthesized here have the formal composition "(PNPR)Re + olefin", and each of these is capable of dehydrogenating the methyl group of a variety of alkanes at 110 degrees C to form (PNP)ReH triple bond (CR).     

The reactivity of Mo(PMe3)(6) towards heterocyclic nitrogen compounds: transformations relevant to hydrodenitrogenation

The reactions of Mo(PMe3)6 towards a variety of five- and six-membered heterocyclic nitrogen compounds (namely, pyrrole, indole, carbazole, pyridine, quinoline, and acridine) have been studied to provide structural models for the coordination of these heterocycles to the molybdenum centers of hydrodenitrogenation catalysts. Pyrrole reacts with Mo(PMe3)6 to yield the eta5-pyrrolyl derivative (eta5-pyr)Mo(PMe3)3H, while indole gives sequentially (eta1-indolyl)Mo(PMe3)4H, (eta5-indolyl)Mo(PMe3)3H, and (eta6-indolyl)Mo(PMe3)3H, with the latter representing the first example of a structurally characterized complex with an eta6-indolyl ligand. Likewise, carbazole reacts with Mo(PMe3)6 to give (eta6-carbazolyl)Mo(PMe3)3H with an eta6-carbazolyl ligand. The reactions of Mo(PMe3)6 with six-membered heterocyclic nitrogen compounds display interesting differences in the nature of the products. Thus, Mo(PMe3)6 reacts with pyridine to give an eta2-pyridyl derivative [eta2-(C5H4N)]Mo(PMe3)4H as a result of alpha-C-H bond cleavage, whereas quinoline and acridine give products of the type (eta6-ArH)Mo(PMe3)3 in which both ligands coordinate in an eta6-manner. For the reaction with quinoline, products with both carbocyclic and heterocyclic coordination modes are observed, namely [eta6-(C6)-quinoline]Mo(PMe3)3 and [eta6-(C5N)-quinoline]Mo(PMe3)3, whereas only carbocyclic coordination is observed for acridine.