示波极谱同时测定金属锌中铜和镉

本文提出了在ＨＣｌ－Ｈ３ＰＯ４－ＫＣｌ底液中示波极谱同时测定金属锌中铅，镉含量的方法，检测下限铅为０．１ｍｇ／Ｌ，镉为０．０１ｍｇ／Ｌ，铅、锡波形清晰，重现性好，试样中回标准回收，铅回收率为９９．２％～１００％，镉回收率为９５％～９８％，与标准方法比较，相对误差〈５％，方法准确，简便，快速，适用于金属锌中铅，镉的常规分析。     

示波极谱同时测定金属锌中铅和镉

本文提出了在ＨＣｌ－Ｈ＿３ＰＯ＿４－ＫＣｌ底液中示波极谱同时测定金属锌中铅、镉含量的方法，检测下限铅为０．１ｍｇ／Ｌ，镉为０．０１ｍｇ／Ｌ铅、锡波形清晰，重视性好。试样中加标准回收，铅回收率为９９．２％～１００％，镉回收率为９５％～９８％，与标准方法比较，相对误差＜５％。方法准确、简便、快速，适用于金属锌中铅、镉的常规分析。     

乙基磺原酸钾—MIBK萃取原子吸收测定重晶石中铅,镉

本文较详细地研究了以乙基磺原酸钾作为金属分离的溶剂萃取试剂测定重晶石中铅，镉的条件，并确定了测定方法，铅和镉与乙基磺原酸钾反应生成白色络合物，该络合物在水相溶液中能定量地萃入甲基异丁基甲酮中。它们的回收率分别为９７％－１０３％和９６％－１０１％。铅和镉分别在０－６μｇ／ｍＬ和０－０．８μｇ／ｍＬ呈线性关系。本法可测定０．０００ｘ％－０．ｘ％Ｐｂ，０．０００ｘ％－０．０ｘ％Ｃｄ．     

火焰原子吸收光谱法测定污泥中铜锌铅镉镍

污水处理厂污泥进行自然风干，筛分制备污泥样品，经烘干、硝酸－氢氟酸－高氯酸消解后，用火焰原子吸收光谱法测定污泥中铜、锌、铅、镉、镍含量。方法简便、快速、实用，具有较高的精密度和准确度。相对标准偏差为0．8％－6．0％，加标回收率为95％－103％。     

ICP-AES法测定锡铅焊料中铜铁镉锌铝铋

锡铅焊料试样经盐酸、硝酸分解后，加入一定量的硫酸沉淀分离基体铅，以盐酸一氢溴酸排锡后，采用ICP—AES法同时测定铜、铁、镉、锌、铝、铋。方法没有谱线和背景干扰，检出限铜为0．000034％，铁为0．000038％，镉为0．000026％，锌为0．000071％，铝为0．00025％，铋为0．00060％，回收率在91．09／5～99．2％之间。完全满足锡铅焊料中的铜、铁、镉、锌、铝、铋测定的要求。     

中药片仔癀,六味地黄丸中的微量铬,铅和镉石墨炉原子吸收法测定

本文采用ＧＦ－ＡＡＳ加平台技术，基体改进剂，测定了中药片仔癀，六味地黄丸中铬、铅和镉的含量，铬、铅和镉的线性范围分别为０－０．８ｎｇ／ｍＬ，０－５０ｎｇ／ｍＬ，０－５ｎｇ／ｍＬ，回收率分别为１０２－１０３％，９９－１０１％，９７．５－９８％，本方法简便快速、准确。     

流动注射—二极管阵列检测分光光度法同时测定铅和镉

建立流动注射－电荷耦合器件二极管阵理分光光度法装置，研究了以ｍｅｓｏ－四（４－三甲铵苯基）卟啉为显色剂同时测定铅和镉的方法，镉和铅测定的线性范围为０～２．０ｍｇ／Ｌ和０～２．５ｍｇ／Ｌ镉的检出限为０．０１４ｍｇ／Ｌ，铅为０．０１５ｍｇ／Ｌ。进样频率为６０次／ｈ，对合成样品和陶瓷食具容器浸泡液中铅和镉进行了同时测定，获得满意的结果，样品的平均标准加入回收率为１００．９％，相对标准偏差小于８．８％。     

石墨炉原子吸收光谱法测定蘑菇中的镉、铅

采用石墨炉原子吸收光谱法测定蘑菇中的镉、铅，以磷酸二氢铵和硝酸镁作混合基体改进剂，提高了测定的灰化温度，消除了基体干扰。方法简便，快速，准确度高。镉和铅的相对标准偏差为3．7％-6．0％和7．3％-7．9％；回收率为98％-106％和98％-104％；检出限为0．009μg/g和0．032μg/g。     

火焰原子吸收光谱法直接测定食用菌中的铅和镉

采用火焰原子吸收法直接测定了食用菌中铅和镉的含量。方法灵敏、准确，测定时无须富集、萃取，操作简便，快速，铅和镉的相对标准偏差分别在3．3％～7．3％和3．1％～7．5％之间。回收率在94％～106％和95％～105％之间；检出限为0．016mg/L和0．008mg/L。     

ICP-MS法测定PVC-U饮水管材(件)中的痕量铅、镉、锡、汞

采用电感耦合等离子体质谱(ICP—MS)法测定硬聚氯乙烯(PVC—U)饮水管材(件)中的痕量铅、镉、锡、汞，对影响测量结果的因素进行了分析。利用该法测定铅、镉、锡、汞的检出限分别为0.0028、0．0025、0．0052、0．0033μg/L，回收率为84．60％～94.30％，测定结果的相对标准偏差小于4．23％。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.