GeS2-Ga2S3-CsCl玻璃的三阶非线性光学性能研究

用传统的熔融急冷法制备了组分为(100-2x) GeS₂-xGa₂S₃-xCsCl (x= 15, 20, 25 mol%)系列硫卤玻璃, 测试了样品玻璃的吸收光谱. 采用Z-扫描方法测试了样品的三阶非线性光学特性. 分析了激光光子能量与玻璃三阶非线性光学特性的关系,并研究了组分变化对玻璃的三阶非线性性能的影响. 研究结果表明,光子能量的少许改变可以使非线性吸收系数在一个较大的范围内变化,随着光子能量的增大, 玻璃的非线性吸收系数β 增大;当光子能量趋近于0.5E_g时, β值趋近于0,玻璃有最佳的品质因子; 玻璃样品中CsCl含量的增加使得玻璃的光学带隙E_g增大,短波截止边蓝移,非线性吸收系数β 减小. 但是由于结构与带隙对光学非线性的影响相反,非线性折射率γ 值变化不大. 该结果表明样品的光学非线性性能由光学带隙和结构两方面因素共同决定,对今后研究全光开关用硫系玻璃具有一定的指导意义和参考价值.     

小斜率近似在粗糙面激光散射BRDF计算中的应用

基于小斜率近似法建立了粗糙面激光散射双向反射分布函数的数学模型,采用该模型计算了粗糙度参量已知的合金铝样片的双向反射分布函数值,计算结果与实测结果吻合良好,验证了模型的正确性.研究了粗糙度参量和样片光学常量对双向反射分布函数的影响,结果表明,粗糙面激光散射的双向反射分布函数与表面高度起伏均方根、自相关长度及样片光学常量相关.当入射波长一定时,高度起伏均方根越大,或者自相关长度越小,粗糙面粗糙度越大,入射激光的漫反射特性越强,双向反射分布函数峰值越小且分布越分散;当粗糙度一定时,样片光学常量对双向反射分布函数影响较大,粗糙面对入射激光复折射率的虚部越大,样片双向反射分布函数的峰值越小,当粗糙度参量增大时,样片光学参量对双向反射分布函数的影响逐步减弱.     

Bi_2O_3-Li_2O玻璃的热致变色研究

发现氧化和氧化锂所形成的玻璃有着明显的热致变色现象 .温度系数随氧化含量的增加而上升 ,反映了热致变色现象主要来源于氧化 .这种热致变色现象与半导体同样 ,来源于玻璃中的电子 声子相互作用而产生的随温度变化的光学能隙 .氧化重金属氧化物玻璃中高电子密度和低声子能量的化学键是产生强电子 声子相互作用的主要原因     

玻璃熔窑内配合料熔化的相变模型

配合料熔化模型是玻璃熔窑整体数学模型的重要组成部分，配合料熔化模型合理性影响到玻璃液流数值模拟结果的真实性。本文引入焓方法建立了新的配合料熔化“相变模型”。新模型不但考虑了配合料在水平方向上的温度变化，更考虑了在料层厚度方向上的温度变化及固相到液相的转变。应用新模型计算配合料的非等温相变，可以获得配合料熔化过程更多的信息，模拟结果更接近实际情况。     

KCl对GeS_2-Ga_2S_3硫系玻璃光学性能的影响

采用熔融淬冷法制备了GeS2-Ga2S3-KCl系统玻璃,然后测试了样品的厚度、密度、吸收光谱和透射光谱,利用经典的Tauc方程计算了样品光学带隙允许的直接跃迁。结果显示,GeS2-Ga2S3-KCl玻璃拥有较好的物理性能;样品的密度、折射率随着KCl含量增多而减小,而光学带隙则随着KCl含量增加而增大。此外,傅里叶和拉曼红外光谱仪的测试结果表明,随着KCl加入和含量的增加,玻璃基质网络结构发生变化,从而引起相应红外光学性能的改变;同时玻璃拉曼谱出现阶段性的变化,红外截止边带出现了规律性的红移。通过研究KCl含量对基质玻璃的结构影响,给出了硫卤玻璃中基频声子振动与红外多声子吸收截止特性的定量描述,归纳了该类硫卤玻璃的光学性质与基质的依赖关系。     

合金钢材料光学常数的椭偏测量及其修正

用椭偏法测量了入射光波长0.632μm、入射角50°至85°时某合金钢的光学常数。考虑材料表面的粗糙度,用Ohlidal-Lukes理论对所测光学常数值进行修正,发现椭偏参量的修正量随入射角增大而增大。结果表明,用椭偏法测量合金钢光学常数时采用较小入射角能获得更精确的样片光学常数。     

稀土玻璃与高频感应加热

<正> 随着光学仪器工业的发展,对光学玻璃的品种、质量提出了更高的要求。例如,为了扩大相对孔径、提高成象质量、简化镜头设计,就要采用高折射率、低色散光学玻璃。其光学常数在n_d-V图中位于重冕光学玻璃之上。这类玻璃摩莱最先开始研究,他以氧化硼作为玻璃生成体、添加原子序较大的氧化物如La_2O_3和     

Ge-Sb-S硫系玻璃的光谱特性及网络结构阈值行为研究

用熔融淬冷技术制备了两组Ge-Sb-S三元体系的硫系玻璃,获得了在不同Ge和Sb元素含量下制备所得玻璃的一系列物化及光谱学特性,并结合拉曼光谱从玻璃微观结构层面对光学特性的变化进行了系统的分析。利用基于平均配位数(Z)的玻璃网络限制理论直观地描述了网络结构的变化趋势,发现当玻璃的Z值超过2.6时,其相应的拉曼谱上会有明显的新峰出现,说明玻璃的网络结构产生了阈值行为且结构组成发生了明显变化,具体表现为非金属化合键的减少和金属化合键的增加。玻璃网络中新功能团的形成改变了玻璃整体键能的大小,进而影响了玻璃的能带结构,从而玻璃的光学带隙(E_opg)值也随着Z值的变化表征出相应的阈值行为。     

TeO2-Nb2O5-BaCl2玻璃的结构及光学性能研究

用传统熔融法制备了一种新型的氧氯碲酸盐玻璃:（90-x）TeO₂-10Nb₂O₅-xBaCl₂（x=10,20,30）,用密度比重天平、显微拉曼光谱仪、红外-可见-紫外分光光度计和棱镜耦合仪研究了组分变化对玻璃密度、结构、光学性质、折射率和色散的影响.研究结果表明:随玻璃中BaCl₂含量增加,玻璃密度出现了先增大后减小的现象;玻璃结构中双三角锥体[TeO₄]量减少,三角棱锥体[TeO₃]量增加;玻璃的折射率逐渐减小.新型的氧氯碲酸盐玻璃具有较高的线性折射率n_max=2.02259,非线性折射率N₂=6.8×10^-12esu与三阶非线性极化率χ^（3）=3.7×10^-13esu.制备的新型碲酸盐玻璃在可见和中红外光谱区具有高透过,在近紫外光谱区具有明显的吸收截止波长,且随BaCl₂含量增加吸收截止波长发生了明显的蓝移现象.利用经典的Tauc方程计算了玻璃样品的直接跃迁光学带隙和间接跃迁光学带隙,玻璃的光学带隙随BaCl₂含量增加而增大.     

PbI2对远红外Te基硫系玻璃光学性能的影响

用传统的熔融淬冷法制备了一系列新型Ge-Te-PbI₂硫系玻璃,并且讨论了玻璃的形成区域. 利用X射线衍射(XRD)、差热分析(DTA)、可见/近红外吸收光谱、红外透过光谱等技术,研究重金属卤化物PbI₂对Ge-Te硫系玻璃组成、结构和性能的影响. 利用Tauc方程计算了样品的直接和间接光学带隙,根据金属标准和能量带隙理论讨论了玻璃光学带隙与组分变化的关系. 结果表明:PbI₂的引入,提高了Te玻璃的形成能力,而且玻璃的热稳定性良好;随着PbI₂含量的增加,玻璃的密度和折射率均增大,光学带隙减小,短波吸收截止边发生红移,玻璃的红外截止波长基本不变,达到了25 μm. 该系列玻璃可用于制备远红外长波波导器件. 关键词： Te基玻璃 2')" href="#">PbI₂ 光学带隙 红外光谱     

Modeling,Structural, and Spectroscopic Studies of Cobalt-doped Lithium Phosphate Glasses and Effect of Gamma Irradiation

Undoped and cobalt oxide-doped lithium phosphate glasses were prepared by normal melt annealing technique. The structure and optical properties were investigated in order to understand the spectroscopic properties and state of cobalt in this host glass. The glass samples were characterized by combined UV-Visible and Fourier transform infrared absorption spectroscopic techniques. Ultraviolet and visible spectroscopy is used to determine the optical absorption spectra of the base undoped glass and that due to the cobalt ions in this host glass. Spectroscopic investigations were approved using the density functional theory calculations, which were employed to interpret both theoretical and experimental IR data of this glass system and to identify the main building structural groups present in these glasses. Experimental results indicate that divalent cobalt ions occupy more than one coordination state, namely, the octahedral and tetrahedral forms. The changes in the UV-Vis and infrared spectral data are discussed in relation to the change in the state of cobalt ions with glass composition or dopant concentration or structural evolution caused by the changes in glass constituents.     

组合式力热动态载荷光学窗口的光学特性研究

针对在一定压差及温度梯度等复合环境下工作的大口径光学窗口,提出了一种由光学玻璃与亚克力板组成的光学窗口组合方案,并以热光学分析为基础,对光学窗口整体强度及热环境进行了理论分析计算,得出光学窗口玻璃最小厚度。利用有限元软件将压力场及轴向温度场映射至三维结构模型,计算得到直径为380 mm的光学窗口在不同玻璃厚度下力热耦合的面形变化及成像质量评价指标,并通过相应的环境性试验对仿真结果进行验证。实验结果表明:以K9光学玻璃为原材料的大口径光学窗口在此工作环境下的厚度不小于32.5 mm;当光学窗口厚度为35 mm时,其所受热力学影响可以忽略。因此,35 mm的大口径组合式光学窗口既能满足强度要求,又能满足多光谱相机成像质量要求,为该类窗口的设计提供了依据。     

Photoconductivity,photoluminescence and optical Kerr nonlinear effects in zinc oxide films containing chromium nanoclusters

Chromium doped zinc oxide thin solid films were deposited on soda–lime glass substrates. The photoconductivity of the material and its influence on the optical behavior was evaluated. A non-alkoxide sol–gel synthesis approach was used for the preparation of the samples. An enhancement of the photoluminescence response exhibited by the resulting photoconductive films with embedded chromium nanoclusters is presented. The modification in the photoconduction induced by a 445 nm wavelength was measured and then associated with the participation of the optical absorptive response. In order to investigate the third order optical nonlinearities of the samples, a standard time-resolved Optical Kerr Gate configuration with 80 fs pulses at 830 nm was used and a quasi-instantaneous pure electronic nonlinearity without the contribution of nonlinear optical absorption was observed. We estimate that from the inclusion of Cr nanoclusters into the sample results a strong optical Kerr effect originated by quantum confinement. The large photoluminescence response and the important refractive nonlinearity of the photoconductive samples seem to promise potential applications for the development of multifunctional all-optical nanodevices.     

Electrical conductivity studies of mixed phthalocyanine thin films

Thin films of mixed of Copper Phthalocyanine (CuPc) and Nickel Phthalocyanine (NiPc) are deposited onto a pure glass substrate by a simultaneous thermal evaporation technique at room temperature. The material D.C. electrical conductivity of films at room temperature and also films annealed at 523 K has been investigated. The optical absorption and band gaps of the films are also measured. The results show that the electrical resistance is lower for the mixed films compared with the pure samples and also the optical band gap decreases for the mixed samples compared to the pure samples.     

Properties of mixed molybdenum oxide-iridium oxide thin films synthesized by spray pyrolysis

Molybdenum-doped iridium oxide thin films have been deposited onto corning glass- and fluorine-doped tin oxide coated corning glass substrates at 350 °C by using a pneumatic spray pyrolysis technique. An aqueous solution of 0.01 M ammonium molybdate was mixed with 0.01 M iridium trichloride solution in different volume proportions and the resultant solution was used as a precursor solution for spraying. The as-deposited samples were annealed at 600 °C in air medium for 1 h. The structural, electrical and optical properties of as-deposited and annealed Mo-doped iridium oxide were studied and values of room temperature electrical resistivity, and thermoelectric power were estimated. The as-deposited samples with 2% Mo doping exhibit more pronounced electrochromism than other samples, including pristine Ir oxide.     

Fast electrochromic response of porous-structured cobalt oxide (Co<Subscript>3</Subscript>O<Subscript>4</Subscript>) thin films by novel nebulizer spray pyrolysis technique

Electrochromic effect of cobalt oxide thin films was studied as a function of substrate temperature (573–673 K). Tricobalt tetraoxide (Co₃O₄) thin films were deposited on glass and fluorine-doped tin oxide (FTO) substrates by nebulized spray technique using cobalt nitrate as precursor material. The XRD patterns indicated (311) plane was dominant for all the films irrespective of the deposition temperature. Williamson-Hall (W-H) analysis was made to understand the strain variation in the prepared Co₃O₄ films under different deposition temperature by employing uniform deformation model (UDM). Scanning electron microscopy images revealed porous morphology for the film prepared at 623 K. The optical parameters such as refractive index (n), extinction coefficient (k), and band gap were derived from UV-visible spectra of Co₃O₄ films. The electrochromic performance of the deposited Co₃O₄ films was analyzed through cyclic voltammetry, chronocoulometry, chronoamperometry, and iono-optical studies.     

The optical,structural and thermal optimizations of Ge-As-Se-S-Te glasses

The optical, structural and thermal optimizations of Ge₃₃As₁₂Se₅₅ glass were the aim of this study. In this regards, Ge₃₃As₁₂Se₄₅M₁₀ (M = Se, Te, S and S_0.5Te_0.5) glasses were synthesized by conventional melt quenching technique in quartz ampule. The prepared samples were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The fundamental absorption edge for prepared samples was also analyzed in terms of the theory proposed by Davis and Mott. The addition of S and Te elements to melting batch has deleterious effects on optical properties of Ge₃₃As₁₂Se₅₅ glass. Mg and Al can act as gettering elements for reduction of the intensity of oxide absorption bands from FTIR spectra (without any effects on optical properties of Ge₃₃As₁₂Se₅₅ glass). The precipitation of GeSe phase, during crystallization process, has negligible effects on optical properties of Ge₃₃As₁₂Se₅₅ glass.     

Electrochromic and photoluminescence properties of cobalt oxide thin films prepared by spray pyrolysis

Cobalt oxide thin films were prepared by a facile spray pyrolysis technique, using a perfume atomizer with an aqueous solution of hydrated cobalt chloride salt with a molar concentration of 0.025?M as a source of cobalt. The films were deposited onto glass substrates at temperature of 350?°C. The structural, morphological, and electrochromic properties of the obtained films were studied. It was found from X-ray diffraction analysis that the films were polycrystalline in nature with spinel-type cubic structure and preferred orientation along [111] direction. The Scanning Electron Microscopy images revealed a porous structure with the average grain size around 200?nm. The cyclic voltammetry measurements revealed that Cobalt oxide thin film is an anodically coloring electrochromic material with a transmittance variation in the visible range of 31%, and a fast response time (about 2?seconds) and a good cycling stability. These electrochromic performances make cobalt oxide thin film an attractive material for using as an anodic electrochromic material in smart windows devices. The photoluminescence spectra exhibited a strong emission in the visible region confirming the good crystallinity properties of Co₃O₄ thin films.     

Supercapacitive cobalt oxide (Co3O4) thin films by spray pyrolysis

Uniform and adherent cobalt oxide thin films have been deposited on glass substrates from aqueous cobalt chloride solution, using the solution spray pyrolysis technique. Their structural, optical and electrical properties were investigated by means of X-ray diffraction (XRD), scanning electron micrograph (SEM), optical absorption and electrical resistivity measurements. Along with this, to propose Co₃O₄ for possible application in energy storage devices, its electrochemical supercapacitor properties have been studied in aqueous KOH electrolyte. The structural analysis from XRD pattern showed the oriented growth of Co₃O₄ of cubic structure. The surface morphological studies from scanning electron micrographs revealed the nanocrystalline grains alongwith some overgrown clusters of cobalt oxide. The optical studies showed direct and indirect band gaps of 2.10 and 1.60 eV, respectively. The electrical resistivity measurement of cobalt oxide films depicted a semiconducting behavior with the room temperature electrical resistivity of the order of 1.5 × 10³ Ω cm. The supercapacitor properties depicted that spray-deposited Co₃O₄ film is capable of exhibiting specific capacitance of 74 F/g.     

Structural and optical properties of Co-doped NiO films prepared by SILAR method

In this study, transparent thin films of un-doped and Co-doped nickel oxide were deposited onto microscopic glass substrates using the successive ionic layer adsorption and reaction (SILAR) method. The effect of cobalt doping on structural, morphological and optical properties was investigated. XRD studies reveal that all the films are polycrystalline with cubic structure and exhibit (1 1 1) and (2 2 2) preferential orientations. Co is well incorporated in the host lattice without altering the structure. All films retain high transparency throughout the visible spectral regime. No significant shift in Raman spectra was observed due to the Co doping.