Rhodium-catalyzed carbothiolation reaction of 1-alkylthio-1-alkynes

A rhodium complex derived from RhH(PPh₃)₄ and Me₂PhP catalyzed the carbothiolation reaction of 1-alkylthio-1-alkynes and 1,4-diaryl-1,3-butadiynes giving (Z)-4-alkylthio-4-aryl-3-arylethynyl-3-buten-1-ynes. Terminal alkynes such as 1-decyne and (t-butylthio)acetylene underwent the carbothiolation reaction using a RhH(PPh₃)₄-dppb catalyst. The reactions proceeded via cis-addition with C-C bond formation at the less hindered acetylene carbon.     

Syntheses of ketonated disulfide-bridged diruthenium complexes via C-H bond activation and C-S bond formation

The alpha-C-H bonds of 3-methyl-2-butanone, 3-pentanone, and 2-methyl-3-pentanone were activated on the sulfur center of the disulfide-bridged ruthenium dinuclear complex [(RuCl(P(OCH3)3)2)2(mu-S2)(mu-Cl)2] (1) in the presence of AgX (X = PF6, SbF6) with concomitant formation of C-S bonds to give the corresponding ketonated complexes [(Ru(CH3CN)2(P(OCH3)3)2)(mu-SSCHR1COR2)(Ru(CH3CN)3(P(OCH3)3)2)]X3 ([5](PF6)3, R1 = H, R2 = CH(CH3)2, X = PF6; [6](PF6)3, R1 = CH3, R2 = CH2CH3, X = PF6; [7](SbF6)3, R1 = CH3, R2 = CH(CH3)2, X = SbF6). For unsymmetric ketones, the primary or the secondary carbon of the alpha-C-H bond, rather than the tertiary carbon, is preferentially bound to one of the two bridging sulfur atoms. The alpha-C-H bond of the cyclic ketone cyclohexanone was cleaved to give the complex [(Ru(CH3CN)2(P(OCH3)3)2)(mu-SS-1- cyclohexanon-2-yl)(Ru(CH3CN)3(P(OCH3)3)2)](SbF6)3 ([8](SbF6)3). And the reactions of acetophenone and p-methoxyacetophenone, respectively, with the chloride-free complex [(Ru(CH3CN)3(P(OCH3)3)2)2(mu-S2)]4+ (3) gave [(Ru(CH3CN)2(P(OCH3)3)2)(mu-SSCH2COAr)(Ru(CH3CN)3(P(OCH3)3)2)](CF3SO3)3 ([9](CF3SO3)3, Ar = Ph; [10](CF3SO3)3, Ar = p-CH3OC6H4). The relative reactivities of a primary and a secondary C-H bond were clearly observed in the reaction of butanone with complex 3, which gave a mixture of two complexes, i.e., [(Ru(CH3CN)2(P(OCH3)3)20(mu-SSCH2COCH2CH3)(Ru(CH3CN)3(P(OCH3)3)2)](CF3SO3)3 ([11](CF3SO3)3) and [(Ru(CH3CN)2(P(OCH3)3)2)(mu-SSCHCH3COCH3)(Ru(CH3CN)3(P(OCH3)2)](CF3SO3)3 ([12](CF3SO3)3), in a molar ratio of 1:1.8. Complex 12 was converted to 11 at room temperature if the reaction time was prolonged. The relative reactivities of the alpha-C-H bonds of the ketones were deduced to be in the order 2 degrees > 1 degree > 3 degrees, on the basis of the consideration of contributions from both electronic and steric effects. Additionally, the C-S bonds in the ketonated complexes were found to be cleaved easily by protonation at room temperature. The mechanism for the formation of the ketonated disulfide-bridged ruthenium dinuclear complexes is as follows: initial coordination of the oxygen atom of the carbonyl group to the ruthenium center, followed by addition of an alpha-C-H bond to the disulfide bridging ligand, having S=S double-bond character, to form a C-S-S-H moiety, and finally completion of the reaction by deprotonation of the S-H bond.     

Rhodium-catalyzed thiophosphinoylation reaction of 1,2-dienes with diphosphine disulfides

In the presence of RhH(PPh₃)₄, the reaction of 1,2-alkadienes, tetramethyldiphosphine disulfide, and camphorsulfonic acid gave (E)-2-dimethylthiophosphinoyl-2-alkenes. The reaction involved the P-P cleavage and the transfer of the thiophosphinoyl group to 1,2-alkadienes with concomitant formation of thiophosphinic anhydride.     

Rhodium-catalyzed alkylation of aromatic azines with alkenes via C-H bond activation

The aromatic azines reacted with terminal alkenes under a rhodium catalyst [RhCl(coe)₂]₂ and Cy₃P to give the alkylated products with good to high isolated yields. The azines bearing H and o-CH₃, p-CH₃ and p-CH₃O groups have high reactivities, but m-CH₃O, p-Cl, p-F exhibit low reactivities.     

Rhodium-catalyzed alkylation of terephthaldialdimine with terminal alkenes via C-H bond activation

Terephthaldialdimine 1a reacted with alkenes to give 2,6-dialkylated products selectively in moderate to high isolated yields. In the case of terephthaldialdimine 1b having a substituent at site 2 in the phenyl ring, the alkylation takes place selectively at site 6 in the phenyl ring. In this alkylation, a meta-substituent affected the reactivity significantly because of the steric hindrance.     

On the mechanism of the copper-mediated C-S bond formation in the intramolecular disproportionation of imine disulfides

The mechanism of the copper-mediated disproportionation of aromatic imine disulfides to benzothiazoles in the gas phase is investigated by experimental and theoretical methods. Application of infrared multiphoton dissociation and hydrogen/deuterium exchange experiments combined with density functional theory (DFT) calculations of the relevant molecular structures and the associated infrared spectra allows the identification of the observed ionic intermediates. The theoretical investigation of the possible reaction pathways supported by collision-induced dissociation experiments provides a consistent mechanistic picture of the reaction catalyzed by a single copper(I) ion. Activation of the substrate proceeds via homolytic sulfur-sulfur bond cleavage, yielding metal complexes in the formal +3 oxidation state; carbon-sulfur coupling and hydrogen-atom transfer complete the transformation to the products. Exploratory studies demonstrate that in the gas phase, the disproportionation of the imine disulfide can also be mediated by other metal ions via different either homo- or heterolytic mechanisms without involving high-valent intermediates.     

Rhodium-catalyzed regio- and stereoselective 1-seleno-2-thiolation of 1-alkynes

Rhodium complex RhH(PPh(3))(4) and 1,1'-bis(diphenylphosphino)ferrocene catalyze the regio- and stereoselective additions of diaryl disulfides and diaryl diselenides to 1-alkynes giving (Z)-1-arylseleno-2-arylthio-1-alkenes. The catalyst promotes the addition reaction of dibutyl disulfide and dibutyl diselenide to 1-octyne with a similar selectivity giving (Z)-1-butylseleno-2-butylthio-1-octene but with a lower catalytic activity. The same product is obtained with a higher yield, when excess dibutyl disulfide is used against dibutyl diselenide in the presence of RhH(PPh(3))(4) and 1,4-diphenylphosphinobutane.     

Rhodium-catalyzed synthesis of 1-alkynylphosphine oxides from 1-alkynes and tetraphenylbiphosphine

A rhodium complex RhH(PPh₃)₄ catalyzes the C-P bond forming reaction of 1-alkynes and tetraphenylbiphosphine in the presence of 2,4-dimethylnitrobenzene giving 1-alkynylphosphines and its oxides.     

Palladium-catalyzed synthesis of 2-substituted benzothiazoles via a C-H functionalization/intramolecular C-S bond formation process

Catalytic synthesis of 2-substituted benzothiazoles from thiobenzanilides was achieved in the presence of a palladium catalyst through C-H functionalization/C-S bond formation. This method features the use of a novel catalytic system consisting of 10 mol % of Pd(II), 50 mol % of Cu(I), and 2 equiv of Bu4NBr that produced variously substituted benzothiazoles in high yields with good functional group tolerance.     

Rhodium-catalyzed intermolecular hydroacylation of 1-alkynes: Effect of phosphines and MK-10 on the reaction selectivity

The use of bulky ligands in the rhodium-catalyzed reaction of aldehydes 7 (R¹ = Ph) and 18 with 1-octyne increased the selectivity for ketones 13 and 20, to the detriment of ketones 12 and 19. Bulky phosphines reduced the hydroacylation reaction rate, leading to competition from the addition of the benzoic acid co-catalyst to the alkynes. This competing reaction can be suppressed by using the clay Montmorillonite K 10 (MK-10) as the co-catalyst instead of benzoic acid.     

Rhodium-catalyzed intermolecular amidation of arenes with sulfonyl azides via chelation-assisted C-H bond activation

We report the direct amidation of arene C-H bonds using sulfonyl azides as the amino source to release N(2) as the single byproduct. The reaction is catalyzed by a cationic rhodium complex under external oxidant-free conditions in the atmospheric environment. A broad range of chelate group-containing arenes are selectively amidated with excellent functional group tolerance, thus opening a new avenue to practical intermolecular C-N bond formation.     

Cleavage of S-S bond by nitric oxide (NO) in the presence of oxygen: a disproportionation reaction of two disulfides

Disulfide bond was cleaved by a catalytic amount of nitric oxide in the presence of oxygen, which was confirmed by experiments employing two symmetrical disulfides. The reaction resulted in the formation of unsymmetrical disulfides in nearly 50% yields. The steric hindrance of alkyl disulfide slowed the reaction rate, and an electron-donating group on the aryl disulfide promoted the reaction. The substituent and S-nitrosothiol effects suggested that the reaction was initialized with an oxidative process by NO+.     

Rhodium-catalyzed regioselective C-H functionalization via decarbonylation of acid chlorides and C-H bond activation under phosphine-free conditions

Efficient rhodium(I)-catalyzed regioselective functionalization of aromatic C-H bonds has been realized with acid chlorides as the coupling partners via decarbonylation and C-H activation under phosphine-free conditions.     

Rhodium-catalyzed oxidative coupling of triarylmethanols with internal alkynes via successive C-H and C-C bond cleavages

The rhodium-catalyzed oxidative coupling of triarylmethanols with internal alkynes effectively proceeds in a 1:2 manner via cleavage of C-H and C-C bonds to produce the corresponding naphthalene derivatives. Addition of tri- or tetraphenylcyclopentadiene as a ligand is crucial for the reaction to occur efficiently.     

C-S bond formation reaction between a phenolate and disulfide-bridged dicopper(I) complexes

A novel C-S bond formation reaction took place, when a lithium phenolate derivative was treated with a disulfide-bridged dicopper(I) complex or a bis(micro-thiolato)dicopper(II) complex under very mild conditions. The reaction has been suggested to proceed via a disulfide-bridged (micro-phenoxo)dicopper(I) complex as the common reaction intermediate. Copper(II) complexes of the modified ligands containing a thioether group (products of the C-S bond formation reaction) have been isolated and structurally characterized by X-ray analysis as model compounds of the active site of galactose oxidase. Mechanism of the C-S bond formation reaction is also discussed in relation to the biosynthetic mechanism of the organic cofactor Tyr-Cys of galactose oxidase.     

Rhodium-catalyzed regioselective arylation of phenylazoles and related compounds with arylboron reagents via C-H bond cleavage

The rhodium-catalyzed direct ortho-arylation reactions of phenylazoles using arylboron reagents such as tetraarylborates were examined. Ethyl chloroacetate and potassium fluoride were found to effectively act as a hydrogen acceptor and a promoter, respectively, to afford selective formation of the corresponding mono- or diarylated products with good yields. In addition, azobenzene as well as 2-phenylpyridine also underwent the direct arylation under similar conditions.     

Activation of the S-S bond in diphenyl disulfide by nickel complexes and its reaction with butadiene

Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, p. 747, March, 1989.     

Rhodium-catalyzed substitution reaction of aryl fluorides with disulfides: p-orientation in the polyarylthiolation of polyfluorobenzenes

In the presence of a catalytic amount of RhH(PPh3)4 and 1,2-bis(diphenylphosphino)benzene, an aromatic fluoride, an organic disulfide (0.5 equiv), and triphenylphosphine (0.5 equiv) reacted in refluxing chlorobenzene to give an aryl sulfide in high yield. Since triphenylphosphine trapped fluoride atoms forming phosphine difluoride, both organothio groups of the disulfide reacted effectively, and the fluoride substituent reacted more readily than the chloride and bromide. The reaction of hexafluorobenzene and a diaryl disulfide gave 1,4-diarylthio-2,3,5,6-tetrafluorobenzene, 1,2,4,5-tetraarylthio-3,6-difluorobenzene, and hexaarylthiobenzene in a stepwise manner; pentafluorobenzene gave 1-arylthio-2,3,5,6-tetrafluorobenzene; 1,2,3,4-tetrafluorobenzene gave 1,2-diarylthio-3,6-difluorobenzene; and 1,2,4,5-tetrafluorobenzene gave 1,4-diarylthio-2-5-difluorobenzene. The polyarylthiolation reaction of polyfluorobenzenes exhibited a strong tendency to form 1,4-difluorobenzenes.     

Rhodium-catalyzed oxidative ortho-acylation of benzamides with aldehydes: direct functionalization of the sp2 C-H bond

A rhodium-catalyzed oxidative acylation of benzamides with aryl aldehydes via direct sp(2) C-H bond cleavage is described. In the presence of [Cp*RhCl(2)](2), AgSbF(6), and silver carbonate as an oxidant, N,N-diethyl benzamides can be effectively carbonylated to yield ortho-acyl benzamides.