Characterization and 2D self-assembly of CdSe quantum dots at the air-water interface

Langmuir film properties, UV-vis spectroscopy, epifluorescence microscopy, and transmission electron microscopy were used to study CdSe quantum dots (QDs) in 2D. By combining these results, it was possible to determine the molar absorptivity, limiting nanoparticle area, luminescence property, and arrangement of the QDs in the monolayer films at the air-water interface. Either trioctylphosphine oxide (TOPO) or 1-octadecanethiol (ODT) stabilized the QDs. The data collected reveal that TOPO forms close-packed monolayers on the surface of the QDs and that ODT-stabilized QDs undergo alkyl chains interdigitation. It was also found that varying the nanoparticle size, nature of surfactant, surface pressure, and mixed monolayers could help engineer the 2D self-assembly of the QDs at the air-water interface. Of practical importance is the transfer of these monolayer films onto hydrophilic or hydrophobic solid substrates, which could be successfully accomplished via the Langmuir-Blodgett film deposition technique.     

(CdSe)ZnS quantum dots and organophosphorus hydrolase bioconjugate as biosensors for detection of paraoxon

In this paper, we first report a novel biosensor for the detection of paraoxon based on (CdSe)ZnS core-shell quantum dots (QDs) and an organophosphorus hydrolase (OPH) bioconjugate. The OPH was coupled to (CdSe)ZnS core-shell QDs through electrostatic interaction between negatively charged QDs surfaces and the positively charged protein side chain and ending groups (-NH2). Circular dichroism (CD) spectroscopy showed no significant change in the secondary structure of OPH after the bioconjugation, which indicates that the activity of OPH was preserved. Detectable secondary structure changes were observed by CD spectroscopy when the OPH/QDs bioconjugate was exposed to organophosphorus compounds such as paraoxon. Photoluminescence (PL) spectroscopic study showed that the PL intensity of the OPH/QDs bioconjugate was quenched in the presence of paraoxon. The overall quenching percentage as a function of paraoxon concentration matched very well with the Michaelis-Menten equation. This result indicated that the quenching of PL intensity was caused by the conformational change in the enzyme, which is confirmed by CD measurements. The detection limit of paraoxon concentration using OPH/QDs bioconjugate was about 10(-8) M. Although increasing the OPH molar ratio in the bioconjugates will slightly increase the sensitivity of biosensor, no further increase of sensitivity was achieved when the molar ratio of OPH to QDs was greater than 20 because the surface of QDs was saturated by OPH. These properties make the OPH/QDs bioconjugate a promising biosensor for the detection of organophosphorus compounds.     

A luminescent nanosensor for Hg(II) based on functionalized CdSe/ZnS quantum dots

Luminescent and stable CdSe/ZnS core/shell quantum dots (QDs) capped with L-carnitine are firstly prepared for optical determination of mercury ions in ethanol. LC capped QDs have desirable dispersibility, uniformity and good fluorescence properties and were characterized by fluorescence spectroscopy, transmission electron microscopy and infrared spectra. The functionalized QDs turned out to exhibit excellent long-term stability. The modified QDs allowed a highly sensitive determination of mercury ions via analyte-induced changes in the photoluminescence of them. A detection limit of 1.8 × 10⁻⁷ M (36.1 μg · L⁻¹) of mercury ions was obtained, while the interfering effect of other ions (including alkali metal ions, alkali earth metal ions, Ni²⁺, Zn²⁺, Fe²⁺, Ag⁺ and anions such as NO₃ ⁻, SO₄ ²⁻, CO₃ ²⁻ and halogen ions) was negligible even at a very high concentration. The possible mechanism is discussed. Correspondence: Haibing Li, Key Laboratory of Pesticide and Chemical Biology (CCNU), Ministry of Education, College of Chemistry, Central China Normal University, Wuhan 430079, P.R. China; Zhinong Gao, College of Chemistry and Molecular Sciences, Wuhan University, Wuhan 430072, P.R. China     

Intermittent electron transfer activity from single CdSe/ZnS quantum dots

Electron transfer activity from excited single CdSe/ZnS core/shell quantum dots (QDs) to adsorbed Fluorescein 27 was studied by single QD fluorescence spectroscopy. In comparison with QDs, the QD-acceptor complexes showed a shorter average and broader distribution of QD emission lifetimes due to electron transfer to adsorbates. Large fluctuation of lifetimes in single QD/dye complexes was observed, indicating intermittent electron transfer activity from QDs.     

Optical properties of CdSe and CdSe/ZnS quantum dots dispersed in solvents of different polarity

Original organic capping TOPO/TOP groups of CdSe and CdSe/ZnS quantum dots (QDs), from mother solution were replaced with 2_mercaptoethanol, which was chosen as model compound, in order to achieve water solubility. Obtained water dispersions of CdSe and CdSe/ZnS QDs were characterized by UV/VIS absorption and luminescence techniques. Luminescence measurements revealed that bare cores are very sensitive to surface capping, transfer into water diminished emission intensity. Core/shell, CdSe/ZnS, QDs are much more resistant to changes of the capping and solvent, and significant part of emission intensity was preserved in water. The article is published in the original.     

Biosilicated CdSe/ZnS quantum dots as photoluminescent transducers for acetylcholinesterase-based biosensors

CdSe/ZnS core/shell quantum dots (QDs) are functionalized with mercaptoundecanoic acid (MUA) and subsequently covered with poly-L-lysine (PLL) as the template for the formation of the silica outer shell. This nanocomposite is used as a transduction and stabilization system for optical biosensor development. The covalent immobilization of the enzyme acetylcholinesterase from Drosophila melanogaster (AChE) during the formation of the biomimetically synthesized silica is used here as a model, relatively unstable enzyme, as a proof of principle. The enzyme is successfully immobilized onto the QDs and then stabilized by the PLL capping and the subsequent formation of the outer nanoporous silica thin shell, giving rise to the QD/AChE/PLL/silica biosensor. It is shown that the poly-L-lysine templated silica outer shell does not modify the optical properties of the quantum dots, while it protects the enzyme from unfolding and denaturation. The small pores of the silica shell allow for the free diffusion of the analyte to the active center of the enzyme, while it does not allow for the proteases to reach the enzyme. The response of the QD/AChE/PLL/silica nano-biosensor to its substrate, acetylcholine chloride, is evaluated by monitoring the changes in the QDs' photoluminescence which are related to the changes in pH. These pH changes of the surrounding environment of the QDs are induced by the enzymatic reaction, and are associated with the analyte concentration in the solution. The biodetection system proposed is shown to be stable with a storage lifetime of more than 2 months. The data presented provides the grounds for the application of this nanostructured biosensor for the detection of AChE inhibitors.     

CdSe/ZnS quantum dots based fluorescence quenching method for determination of paeonol

Aqueous polymethylmethacrylate (PMMA)-capped CdSe/ZnS quantum dots were used as fluorescence probes for paeonol determination. Based on the fluorescence quenching of aqueous CdSe/ZnS quantum dots caused by paeonol, a simple, sensitive and rapid method was developed. Under the optimal conditions, with excitation and emission wavelengths at 350 nm and 620 nm, respectively, the calibration plot of F0-F with concentration of paeonol was linear in the range of 25.04-175.2 mg L(-1) with correlation coefficient of 0.9986. The limit of detection was 0.017 mg L(-1). The concentration of paeonol in paeonol ointment was determined by the proposed method and the result agreed with the claimed value. Furthermore, the possible fluorescence quenching mechanism was discussed.     

Emission-tunable microwave synthesis of highly luminescent water soluble CdSe/ZnS quantum dots

Water soluble CdSe/ZnS nanoparticles with emission maxima from 511 nm to 596 nm and quantum efficiencies ranging from 11% to 28% are synthesized in a facile two-step method in ambient atmospheric conditions using a commercially available microwave reactor.     

Ionic impurities in nematic liquid crystal doped with quantum dots CdSe/ZnS

We investigated the dielectric losses and the ionic currents in the nematic liquid crystal (NLC) doped with semiconductor quantum dots (QDs) of CdSe/ZnS core – shell type and covered with trioctylphosphine oxide (TOPO) molecules. The dielectric loss tangent of the NLC composites increased with increasing the QDs concentration from 0.1 to 0.3 wt%. The density of mobile ions in the composites increased linearly and the average values of ions mobility in the composites decreased with increasing the QDs concentration. The fast ions with the mobility of about 10^–10 m²/V·s and the slow ions with the mobility of about 10^–11 m²/V·s were detected in the NLC composites. The growth of the content of slow ions took place with increasing the QDs concentrations. Increasing the dielectric loss tangent was observed with increasing the duration of sonication time of the NLC composites to prepare homogeneous suspensions. The fragmentation of the CdS/ZnS shell as a result of the sonication may lead to the appearance of the slow ions in the NLC composites.     

Ellipsometric studies of behenic acid at the air-water interface

The rich phase behaviour of monolayers of behenic acid (=docosanoic acid) has been analyzed by null ellipsometry in isothermic and isobaric measurements. By using structural data known from x-ray measurements the anisotropy and refractive indices in the vicinity of the S-CS phase transition have been calculated with a minimum of model assumptions. The calculated values are: n^s_x=1.47. n^cs_x=1.48. n^sz=1.54. n^cs_z=1.55. and anisotropy γ=n_x/n_z ≈︁0.95. It is also shown that ellipsometry is a very sensitive and convenient method of detecting phase transitions. Its value for quantifying the roughness of the monolayer in the close vicinity of phase transitions due to thickness and density fluctuations is shown by the measurement of the parabolic intensity variations of the ellipsometric angle δΔ. The intensity minimum at the phase transition is much wider than in the adjacent homogeneous phases.     

Multidentate surface ligand exchange for the immobilization of CdSe/ZnS quantum dots and surface quantum dot-oligonucleotide conjugates

A method for synthesizing multidentate thiol ligands on fused silica surfaces (e.g., optical fibers) was developed for the immobilization of CdSe/ZnS quantum dots (QDs) capped with hydrophilic or hydrophobic ligands. This work was motivated by the poor stability of QDs immobilized via monodentate thiol ligands and the need for stable immobilization strategies in the development of sensor technologies based on QDs. Multi-dentate immobilization was able to withstand washing protocols, and surface ligand exchange occurred via self-assembly through the zinc-metal affinity interaction. Atomic force and scanning electron microscopy images suggested that the QDs were immobilized at high density, approximately 2-4 x 10 (13) cm (-2). It was possible to immobilize one, two, or three colors of QD. Upon immobilization, 1-2 nm bathochromic shifts in the PL spectra were observed. This was attributed to both ligand exchange and the change in local environment. The change in environment was accompanied by a decrease in PL lifetime. Self-assembly of immobilized QD-oligonucleotide and QD-avidin conjugates was also demonstrated. These conjugates were able to hybridize with complementary oligonucleotide and bind biotin, respectively. This versatile immobilization chemistry is an important step in the development of surface-based QD nanosensors. Such technology requires QDs to be immobilized such that they remain accessible to target molecules in solution.     

Adsorption and hybridization of oligonucleotides on mercaptoacetic acid-capped CdSe/ZnS quantum dots and quantum dot-oligonucleotide conjugates

Interest in the unique optical properties of quantum dots (QDs) has resulted in the development QD-bioconjugates for imaging and diagnostics. Although these applications are numerous, considerably less is known about the interactions between QDs and biomolecules. In this work, we describe hydrogen-bonding interactions between oligonucleotides and CdSe/ZnS quantum dots capped with mercaptoacetic acid ligands. The strength of the interactions can be modulated by changes in the pH and ionic strength, the addition of formamide, and differences between ssDNA and dsDNA. Fluorescence resonance energy transfer experiments have shown that conjugated oligonucleotides adopt a conformation that lies across the surface of the QD. The hydrogen-bonding interactions also affect the kinetics of hybridization with QD-DNA conjugates and the thermal stability of QD-conjugated dsDNA. The former is analogous to conventional solid-phase hybridization, where stronger oligonucleotide adsorption leads to faster kinetics. With respect to the latter, interactions with the QD surface can sharpen the melt transition and alter the melt temperature of dsDNA. These effects are largely absent when adsorptive interactions are minimized.     

Physico-chemical role of CdSe/ZnS quantum dots in the photo-polymerization process of acrylate composite materials

The work presented in this paper is devoted to the physico-chemical role of quantum dots (QDs) in the photopolymerization of composite materials. We show first that the photoexcitation of CdSe/ZnS semiconductor quantum dots can initiate the polymerization of an acrylate monomer in association with a tertiary amine and in the absence of a photoinitiator. But by using a holographic technique, among the others, the gratings recorded in such composite materials are not stable and relax once the light interference pattern is switched off. This behaviour is attributed to a very low degree of conversion of monomers, which does not prevent the post-exposure diffusion of monomers and nanoparticles. The comparison with gratings obtained in the presence of a photosensitizer dye (higher hologram quality and stability) highlights the key importance of using such dye in the polymerization process. The gratings recorded in the complete syrup, containing the dye and QDs which differ by their size and UV-visible absorption spectra, exhibit an additional refractive index modulation. The latter results from the spatial distribution of QDs and the change in the kinetics of polymerization. We further focus on understanding the fall of the polymerization rate owing to the presence of QDs. This decrease may result from the trapping of the tertiary amine (co-initiator) at the surface of those QDs, which reduces the rate of decay of the dye and, consequently, the polymerization rate. Under such conditions, the diffusion of QDs and monomers is favoured and their spatial redistribution is enhanced. These features contribute to modify the physical properties of the gratings.     

Effect of the thiol-thiolate equilibrium on the photophysical properties of aqueous CdSe/ZnS nanocrystal quantum dots

We study the effect of thiols on the emission efficiency of aqueous CdSe/ZnS core/shell nanocrystal quantum dots (NQDs). We observe that the impact of thiol addition on emission quantum yields (QYs) is time-, concentration-, and pH-dependent. Further, we use a combination of time-resolved spectroscopic methods to determine the mechanism by which thiol addition can cause either increases or decreases in QYs. Specifically, through transient absorption measurements, we show that thiol addition can improve passivation of electron traps, increasing QYs at low thiol concentrations. Further, using nanosecond photoluminescence (PL), we observe that at higher thiol concentrations, hole traps are introduced that reduce PL QYs. Last, through a combination of pH-dependence and control studies (e.g., addition of 2-methyl thioethanol to an aqueous NQD solution and addition of dodecanethiol to a hexane NQD solution), we demonstrate that it is the ability of thiols in aqueous solution to generate thiolate that is the source of both favorable and adverse QY changes. Our results contribute to the understanding of the role of surface ligands, which is critical to the design of stable, high-quantum-yield, nonblinking NQDs.     

Observation of correlated emission intensity and polarization fluctuations in single CdSe/ZnS quantum dots

Time-resolved single-nanoparticle spectroscopy has been carried out to examine the luminescence characteristics of individual CdSe/ZnS core/shell quantum dots. In particular, the possible correlations between emission intensity, lifetime, spectrum, and polarization fluctuations have been investigated. The emission polarization was found to be correlated with the luminescence intensity in a nonlinear way. The low-emissive states were found to correlate with red-shifted spectrum, increased nonradiative decay, and low degree of emission polarization. The observations are consistent with the model that charged quantum dots can be emissive.     

Use of CdSe/ZnS core-shell quantum dots as energy transfer donors in sensing glucose

In the present work, CdSe/ZnS core-shell quantum dots were synthesized and conjugated with enzymes, glucose oxidase (GOD) and horseradish peroxidase (HRP). The complex of enzyme-conjugated QDs was used as QD-FRET-based probes to sense glucose. The QDs were used as an electron donor, whereas GOD and HRP were used as acceptors for the oxidation/reduction reactions involved in oxidizing glucose to gluconic acid. Electron transfer between the redox enzymes and the electrochemical reduction of H₂O₂ (or O₂) occurred rapidly, resulting in an increase of the turnover rate of the electron exchange between the substrates (e.g. glucose, H₂O₂ and O₂) and the enzymes (GOD, HRP), as well as between the QDs and the enzymes. The transfer of non-radiative energy from the QDs to the enzymes resulted in the fluorescence quenching of the QDs, corresponding to the increase in the concentration of glucose. The linear detection ranges of glucose concentrations were 0–5.0 g/l (R = 0.992) for the volume ratios of 10/5/5, 0.2–5.0 g/l (R = 0.985) for the volume ratios of 10/5/3 and 1.0–5.0 g/l (R = 0.982) for the volume ratios of 10/5/0. Temperature (29–37 °C), pH (6–10) and some ions (NH₄⁺, NO₃⁻, Na⁺, Cl⁻) had no interference effect on the glucose measurement.     

Modified ligand-exchange for efficient solubilization of CdSe/ZnS quantum dots in water: a procedure guided by computational studies

One of the methods to render CdSe/ZnS core-shell quantum dots(QDots) water-soluble is to functionalize the surface with carboxylate groups by the use of heterobifunctional ligands such as 3-mercaptopropionic acid, where the thiolic end binds onto the outer ZnS shell. However, currently available ligand-exchange procedures starting with TOPO-capped quantum dots often lead to significant loss of quantum yields and poor stability of the colloids in water. As part of our efforts to overcome these problems, we used computational methods to understand the nature of binding between alkyl thiols and ZnS wurtzite surfaces. Guided by the computational results, we modified the ligand-exchange method and increased the reactivity of 3-mercaptopropionic acid toward the ZnS surface in chloroform. The functionlization reaction required only mild reaction conditions and led to QDot nanoparticles that were individually dispersed in water with good colloidal stability. Importantly, the photoluminescence performance of the QDots was highly preserved.     

Use of CdSe/ZnS luminescent quantum dots incorporated within sol-gel matrix for urea detection

In this work, urea detection techniques based on the pH sensitivity of CdSe/ZnS QDs were developed using three types of sol-gel membranes: a QD-entrapped membrane, urease-immobilized membrane and double layer consisting of a QD-entrapped membrane and urease-immobilized membrane. The surface morphology of the sol-gel membranes deposited on the wells in a 24-well microtiter plate was investigated. The linear detection range of urea was in the range of 0-10 mM with the three types of sol-gel membranes. The urea detection technique based on the double layer consisting of the QD-entrapped membrane and urease-immobilized membrane resulted in the highest sensitivity to urea due to the Michaelis-Menten kinetic parameters. That is, the Michaelis-Menten constant (K_m =2.0745 mM) of the free urease in the QD-entrapped membrane was about 4-fold higher than that (K_m =0.549 mM) of the immobilized urease in the urease-immobilized membrane and about 12-fold higher than that (K_m =0.1698 mM) of the immobilized urease in the double layer. The good stability of the three sol-gel membranes for urea sensing over 2 months showed that the use of sol-gel membranes immobilized with QDs or an enzyme is suitable for biomedical and environmental applications.     

Transparent conducting films of CdSe(ZnS) core(shell) quantum dot xerogels

A method of fabricating sol-gel quantum dot (QD) films is demonstrated, and their optical, structural and electrical properties are evaluated. The CdSe(ZnS) xerogel films remain quantum confined, yet are highly conductive (10(-3) S cm(-1)). This approach provides a pathway for the exploitation of QD gels in optoelectronic applications.     

Surface chemistry of InP quantum dots: a comprehensive study

Advanced (1)H, (13)C, and (31)P solution and solid-state NMR studies combined with IR spectroscopy were used to probe, at the molecular scale, the composition and the surface chemistry of indium phosphide (InP) quantum dots (QDs) prepared via a non-coordinating solvent strategy. This nanomaterial can be described as a core-multishell object: an InP core, with a zinc blende bulk structure, is surrounded first by a partially oxidized surface shell, which is itself surrounded by an organic coating. This organic passivating layer is composed, in the first coordination sphere, of tightly bound palmitate ligands which display two different bonding modes. A second coordination sphere includes an unexpected dialkyl ketone and residual long-chain non-coordinating solvents (ODE and its isomers) which interact through weak intermolecular bonds with the alkyl chains of the carboxylate ligands. We show that this ketone is formed during the synthesis process via a decarboxylative coupling route and provides oxidative conditions which are responsible for the oxidation of the InP core surface. This phenomenon has a significant impact on the photoluminescence properties of the as-synthesized QDs and probably accounts for the failure of further growth of the InP core.