Ring-Opening Polymerization of L-Lactide in Supercritical Chlorodifluoromethane

The ring-opening polymerization of L -lactide initiated by 1-dodecanol/stannous 2-ethylhexanoate (DoOH/Sn(Oct)₂) was carried out in supercritical chlorodifluoromethane at various reaction times, pressures, and temperatures. The monomer conversion increased to ca 70 % on increasing the reaction time to 25 h. The molecular weight of the product also increased to ca 75,000 g/mol over the same period. Increasing the pressure resulted in an accelerated polymerization rate. The pressure-induced increase in the rate of L -LA polymerization can be explained by the formation of chemical bonds in the transition state, which implies the production of a transition state with a lower partial molar volume than the reactants.     

Living Ring-Opening Polymerization of Cyclic Esters with Epoxide-Derived Titanium Alkoxides

Summary: The Ti^IIICp₂Cl-catalyzed radical ring opening of epoxides produces Ti alkoxides which initiate the ring-opening polymerization of ε-caprolactone. A linear dependence of on conversion, linear kinetics, low values, and the synthesis of block copolymers demonstrate a living process, while NMR spectroscopy confirms the presence of the initiator chain end. Epoxides are thus introduced as a new class of initiators for the Ti-catalyzed living ring-opening polymerization of cyclic esters.

The TiCp₂Cl-catalyzed radical ring opening of epoxides followed by the initiation of the living ring-opening polymerization of ε-caprolactone.     

Ring-Opening Polymerization of Cyclic Monomers with Aluminum Triflate

A green method for the controlled synthesis of aliphatic polymers is presented. The ring-opening polymerizations of cyclic monomers including several lactones, such as caprolactone (CL) or pentadecalactone (PDL), and cyclic anhydride monomers, such as succinic anhydride (SUC) and tetrahydrofuran (THF), catalyzed by a series of metal triflates (trifluoromethanesulfonate) were studied. Aluminum triflate was found to be an advantageous candidate to catalyze the ring-opening polymerization of cyclic monomers. The details of the ring-opening polymerization of CL catalyzed by aluminum triflate were studied. The maximum number average molecular weight (M_n), polydispersity (M_w/M_n) and yield of the obtained poly(-caprolactone) (PCL) at 60 °C for 6 hours were 18,400, 1.94 and 89 wt%, respectively. Those of poly(pentadecalactone) (PPDL) at 100 °C for 6 hours were 12,400, 2.24 and 49 wt%, respectively. The M_n, M_w/M_n and yield of the obtained poly(butylene succinate) (PBS) from SUC and THF at 100 °C for 48 hours were 4,900, 2.03 and 84 wt%, respectively. Furthermore, the mechanism of the polymerization was discussed based on the relationship between the conversion of CL and time. The molecular weight buildup of PCL was linear with a conversion in 50 min before the conversion reached 100 % and with M_w/M_n stabilized at about 1.5. The M_w/M_n of PCL then gradually increased. From these data, a living polymerization with a small transesterification was suggested from the PCL polymerization by aluminum triflate.     

Cationic ring‐opening polymerization of novel 1,3‐dehydroadamantanes with various alkyl substituents: Synthesis of thermally stable poly(1,3‐adamantane)s

Cationic ring‐opening polymerizations of 5‐alkyl‐ or 5,7‐dialkyl‐1,3‐dehydroadamantanes, such as 5‐hexyl‐ ( 4 ), 5‐octyl‐ ( 5 ), 5‐butyl‐7‐isobutyl‐ ( 6 ), 5‐ethyl‐7‐hexyl‐ ( 7 ), and 5‐butyl‐7‐hexyl‐1,3‐dehydroadamantane ( 8 ), were carried out with super Brønsted acids, such as trifluoromethanesulfonic acid or trifluoromethanesulfonimide in CH₂Cl₂ or n‐heptane. The ring‐opening polymerizations of inverted carbon–carbon bonds in 4–8 proceeded to afford corresponding poly(1,3‐adamantane)s in good to quantitative yields. Poly( 4–8 )s possessing alkyl substituents were soluble in 1,2‐dichlorobenzene, although a nonsubstituted poly(1,3‐adamantane) was not soluble in any organic solvent. In particular, poly( 8 ) exhibited the highest molecular weight at around 7500 g mol^?1 and showed excellent solubility in common organic solvents, such as THF, CHCl₃, benzene, and hexane. The resulting poly( 4–8 )s containing adamantane‐1,3‐diyl linkages showed good thermal stability, and 10% weight loss temperatures (T₁₀) were observed over 400 °C. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4111–4124     

Cationic Polymerization: New Developments and Applications

The chemistry and technology of photoinitiated cationic polymerization is a rapidly advancing field of investigation. This article reports on recent developments made in our laboratory in the development of new photoinitiators and photosensitizers. S,S-Dialkyl-S-phenacylsulfonium salts have been prepared using a new, highly efficient and cost-effective synthetic method and their use in the polymerization of various monomer systems studied. Also described is the development of alkoxyanthracene photosensitizers that may be employed to broaden the spectral sensitivity of various onium salt photoinitiators including the new S,S-dialkyl-S-phenacylsulfonium salts. A marked acceleration of the rate of the ring-opening polymerization of epoxide monomers was achieved using these photosensitizers. This article concludes with a brief discussion of the use of photoinitiated cationic polymerizations in such typical applications as can coatings, silicone release coatings and in stereolithography.     

沸石咪唑酯骨架-67高效催化L-丙交酯的开环聚合反应

为了探究沸石咪唑酯骨架材料(Zeolitic Imidazolate Frameworks,ZIFs)结构中的金属单元对其催化活性的影响,我们采用室温法合成了ZIF-8、Zn/Co-ZIF和ZIF-67,并用其催化L-丙交酯的本体开环聚合反应。 在相同的反应条件下,ZIF-67具有最高的催化活性。 与2-甲基咪唑(配体)作为催化剂相比,ZIF-67催化得到的聚乳酸具有高度全同立构结构。 此外,基质辅助激光解吸-飞行时间(MALDI-TOF)质谱表明,ZIF-67催化得到的聚乳酸主要为线状结构。 经过3次循环反应后,ZIF-67的催化活性没有明显降低。     

有机小分子催化ε-己内酯开环聚合反应

聚己内酯(PCL)是一种生物可降解高分子材料,具有良好的环境、生物相容性,广泛应用于生物医学、包装等领域。有机小分子催化ε-己内酯单体开环聚合反应是制备聚己内酯的主要方式之一。与传统的金属催化相比,有机催化不仅反应条件温和、聚合可控,而且还可解决聚合物中金属残留问题,是目前高分子合成化学的研究热点。本文按照催化体系的不同活化方式,讨论了近年来有机催化在ε-己内酯开环聚合反应中的研究进展,归纳总结了不同催化体系的优缺点,并在此基础上展望了有机小分子催化剂在ε-己内酯开环聚合反应中的发展趋势和应用前景。     

Cationic polymerization of 1,3-dioxepane in the presence of 2,2-bis(hydroxymethyl)butanol

Cationic polymerization of 1,3-dioxepane (DOP) initiated by triflic acid was carried out in the presence of 2,2-bis(hydroxymethyl)butanol (BHMB). The structure and molecular weight of the products were characterized by GPC and NMR spectra. The results showed that molecular weight of the polyacetal obtained could be controlled by the initial mole ratio of DOP/BHMB. GPC showed that as the mole ratio of BHMB/DOP increased, the content of cyclic oligomers also increased. Proton, ¹³C and 2D HMQC-fg NMR demonstrated that no hydroxymethyl group of BHMB appeared as an end group. It was also illustrated by proton NMR that some BHMB units existed in cyclic oligomers. The mechanism of formation of cyclic oligomers was discussed. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2899–2903, 1998     

Oligomeric Branched Polyethers with Multiple Hydroxyl Groups by Cationic Ring-Opening Polymerization for Inorganic Surface Modification

Summary: Cationic ring-opening polymerization of cyclic ethers (also esters and acetals) substituted with hydroxyl groups leads to branched multihydroxyl polymers. When 4-membered hydroxysubstituted oxetanes or 5-membered hydroxysubstuituted oxolanes (or lactone and 1,3-dioxolane) are used as monomers the polymerization products have limited molecular weights (about 1000). Polymerization of these monomers leading in situ to oligomeric products was used for inorganic surface modification. Successful polymerizations of oxetane as well as considered as difficult to polymerize 5-membered hydroxysubstituted cyclic monomers initiated from montmorillonite clay and silica nanoparticles surfaces were performed.     

Synthesis of Hyperbranched Polysaccharide by Thermally Induced Cationic Polymerization of 1,6-Anhydrohexopyranose

The thermally induced cationic polymerizations of 1,6-anhydro-β-D -glucopyranose ( 1a ), 1,6-anhydro-β-D -mannopyranose ( 1b ) and 1,6-anhydro-β-D -galactopyranose ( 1c ) as a latent cyclic AB₄-type monomer were carried out using (S-2-butenyl)tetramethylenesulfonium hexafluoroantimonate ( 2 ) as an initiator. The solution polymerization in propylene carbonate proceeded without gelation to produce the water-soluble hyperbranched polysaccharides ( 3a-c ) with controlled molecular weights and narrow polydispersities. The degree of branching (DB), estimated by the methylation analysis of 3a-c , was in the range of 0.38 – 0.49. The thermally induced cationic polymerization of 1a-c using 2 is a facile method leading to a hyperbranched polysaccharide with a high DB value.     

A Study of L-Lactide Ring-Opening Polymerization Kinetics

Summary: The paper presents an experimental study of L-lactide polymerization in molten state using as initiator the Stannous Octoate. The experiments were performed in a Haake mixer. The operating temperatures were between 170 and 195°C, the reaction time up to 60 min and monomer to initiator initial molecular ratio between 10² and 5 · 10³. The conversion was determined by using ¹H NMR and the molecular weights distributions by SEC. A preliminary mathematical modeling study was also performed, based on experimental data and a previously published reaction scheme.     

开环聚合-固相缩聚法制备立体嵌段聚乳酸

首先,采用乳酸为引发剂,辛酸亚锡为催化剂,引发丙交酯开环聚合制得具有缩聚活性的L-聚乳酸和D-聚乳酸;然后,将两者熔融共混后进行固相缩聚,合成了一系列立体嵌段聚乳酸。采用核磁共振(NMR)、凝胶渗透色谱(GPC)及差示扫描量热仪(DSC)分析了产物的链结构、重均分子量、热性能,并探讨了均相晶体和立体复合晶体共存情况下的固相缩聚机理。结果表明,固相缩聚产物分子量增长的适宜反应条件为:反应时间30h,较低的催化剂含量,L-聚乳酸质量分数为80%。L-聚乳酸和D-聚乳酸共混物较低的初始立体复合晶体结晶度有利于后续固相缩聚过程中产物分子量的增长;固相缩聚不仅发生在异链之间,而且也发生在同链之间。     

Cationic ring-opening polymerization of 2-isopropenyl-4-methylene-1,3-dioxolane

Preparation and cationic ring-opening polymerization of 2-isopropenyl-4-methylene-1,3-dioxolane ( VI ) was performed. Unsaturated cyclic acetal VI was prepared by dehydrochlorination of 2-isopropenyl-4-chloromethyl-1,3-dioxolane, which was easily obtained from methacrolein and epichlorohydrin, with sodium methoxide at ambient temperature. The cationic polymerization of VI with BF₃OEt₂ or CF₃SO₃H at ?78°C afforded only crosslinked polymers, whereas the polymerization by CH₃SO₃H gave soluble poly(keto-ether) which consisted of units VII containing an isopropenyl group in the side chain and units VIII containing a carbon-carbon double bond in the main chain. The reaction of VI with ethanethiol in the presence of protic acid was also carried out as a model reaction of the polymerization. The reaction initiated by the addition of proton to the 4-methylene group of VI , and quantitative ring-opening isomerization followed by the addition of ethanethiol afforded acyclic ketone IX and X . On the basis of the model reaction, the polymerization mechanism is also discussed. © 1993 John Wiley & Sons, Inc.     

Novel photoinitiated cationic copolymerizations of 4-methylene-2-phenyl-1,3-dioxolane

Photoinitiated polymerization of 4-methylene-2-phenyl-1,3-dioxolane ( 1 ) was carried out using either tris (4-methylphenyl) sulfonium hexafluoroantimonate or 4-decyloxyphenyl phenyliodonium hexafluoroantimonate as initiators. ¹H-NMR analyses confirmed exclusive ring-opening while DSC and SEC were used to determine the glass transition temperatures (T_gs) and molecular weights, respectively. Photoinitiated cationic copolymerizations of 1 were investigated with several acyclic and cyclic monomers. Copolymerization of 1 with vinyl ethers and a spiroorthoester resulted in copolymers whose thermal properties were dependent on comonomer ratios. Copolymers of 1 and dihydrofuran or dihydropyran afforded soluble polymers with T_gs significantly higher than the homopolymer of 1 . © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2207–2219, 1997     

开环易位聚合合成瓶刷聚合物

瓶刷聚合物是一类具有独特侧链结构的梳形聚合物。功能性瓶刷聚合物在光子晶体、表面活性剂、医药载体、防污涂层以及智能材料等领域具有良好的应用价值。通过开环易位聚合合成瓶刷聚合物的方法具有合成步骤简单、聚合物接枝密度高和侧链组成均一等优点,在控制聚合物组成、分子量和分散性等方面具有显著优势。本文基于开环易位聚合,简述了合成瓶刷均聚物以及嵌段型、混合型和核-壳型三种类型的瓶刷共聚物的方法,并介绍了合成精确结构的瓶刷聚合物的新进展。     

氧杂环丁烷开环聚合

合成了以丙腈基和三甘醇单甲醚为侧基的两类聚氧杂环丁烷POE与POA。用GPC测定了其分子量和分子量分布,用^1H—NMR和^13C-NMR谱表征了聚舍物的结构。认为活性链端机理和活性单体机理两种机理的相互竞争、相互转换可解释氧杂环丁烷阳离子开环聚合反应中无法通过单体与引发剂的摩尔浓度比来调节聚舍物分子量,分子量分布宽,并伴有大量齐聚物生成的现象。采用逐滴进样可使AM机理占据主导地位,从而得到分子量可控的较窄分布的聚氧杂环丁烷。测试了聚合物与高氯酸锂复配后的电导率,结果表明;氧／锂摩尔比为20／1时,POE的室温电导率为10^-4.43S／cm,80℃时为10^-3.44S／cm。     

Ring-Opening Metathesis Polymerization of Cyclooctyne Employing Well-Defined Tungsten Alkylidyne Complexes

Summary: The ring-opening metathesis polymerization of cyclooctyne was studied was studied in the presence of catalytic amounts of the tungsten alkylidyne complexes [RCW(NIm^tBu){OCMe(CF₃)₂}₂] ( 1a: R = CMe₃, 1b: R = Ph). The resulting polymers show relatively narrow polydispersities with the PDI ranging from 1.2 to 2.4. Treatment of 1b with cyclooctyne in dilute toluene or hexane solution afforded only low molecular weight oligomers. The mass spectra of these oligomers indicate the existence of macrocycles of the formula [C(CH₂)₆C]_n (n = 3–9). In contrast, reactions at high substrate concentration led to mixtures of cyclic oligomers and linear polymers, which is probably a result of ring-chain equilibria, established in agreement with the Jacobson-Stockmayer theory of macrocyclization. In contrast, treatment of neat cyclooctyne with a catalytic amount of the catalyst produced medium molecular weight polymers in good yields.