Fluorescence Quenching of Tris(2,2′-bipyridine)Ruthenium(II) Dichloride by Certain Organic Dyes

Fluorescence quenching of [Ru(bpy)₃]²⁺ by a series of organic dyes has been investigated by using the steady state fluorescence technique in aqueous medium. The dyes used are anthraquinone dyes: uniblue, acid blue 129, alizarin, alizarin red S and the azo dyes: congo red, sunset yellow, methyl orange, tartrazine, acid orange 63, methyl red and erichrome black T. The quenching of [Ru(bpy)₃]²⁺ was found to obey the Stern-Volmer equation and the corresponding Stern-Volmer plots were linear indicating dynamic quenching. The quenching rate constants (k _q) were calculated from the fluorescence data. The mechanism of quenching was discussed on the basis of the quenching rate constants as well as the reduction potential of dyes. The electron transfer mechanism has been proved by the calculation of Gibbs energy changes (ΔG _et) by applying the Rehm-Weller equation.     

Dinuclear complexes of (2,2′-bipyridine)(2,2′:6′,2′'-terpyridine)-ruthenium(II) bonded through cyanide to pentaammineruthenium(II/III) groups

Summary New dinuclear complexes, containing a Ru(trpy)(bpy)²⁺ moiety (bpy = 2,2-bipyridine, trpy = 2,2:6,2'-terpyridine) bonded through cyanide to Ru(NH₃) _inf5 ^sup2+/3+ groups have been prepared and characterized by spectroscopic and electrochemical techniques. The formation of cyanide bridges is evident from the i.r. and u.v.-vis. spectra by appearance of v(CN) shifts and changes in _max with respect to the mononuclear parent complex [Ru(trpy)(bpy) (CN)]⁺. In the mixed-valence species Ru _infb ^supII —CN—Ru _infa ^supIII (Ru_b = Ru bonded to bpy, Ru_a = Ru bonded to NH₃), an intense metal-to-metal charge transfer transition is observed at _max = 700 nm in MeCN, with ovv _1/2 = 3.6 × 10³ cm^–1. From these spectral data and the difference in redox potentials between both metallic centres (determined by c.v. to be E _1/2 = 1.19 V), a value of k _th,r = 5 × 10⁵ s^-1 has been calculated for the rate of thermal intramolecular electron transfer of the reverse process: Ru _ina ^supII Ru _inb ^supIII . This low value suggests an inverted regime. The complexes studied are thus interesting as models for the design of energy conversion schemes.Presented in part at the XIX Latinoamerican Congress on Chemistry, Buenos Aires, Argentina, November 1990.     

Flow-Injection Chemiluminescent Determination of Piroxicam Using Tris (2,2′-bipyridyl) Ruthenium(II)—Potassium Permanganate System

Abstract

A rapid and sensitive chemiluminescence method using flow-injection has been developed for the determination of an analgesic agent drug, piroxicam. The method is based on the chemiluminescence reaction of piroxicam with an acidic potassium permanganate and Ru(bipy)₃ ²⁺. The chemiluminescence intensity is greatly enhanced when quinine sulfate is used as a sensitizer. After optimization of the different experimental parameters, a calibration graph was obtained over a concentration range of 3.0 × 0^?8–3.0 × 0^?5 mol L^?1 with the detection limit of 1.0 × 0^?8 mol L^?1. The relative standard deviation is 1.5% (n = 11) for the determination of 8.0 × 10^?7 mol L^?1 piroxicam. The proposed method was successfully applied to commercial tablets, spiked serum, and urine samples.     

Electrochemistry of microparticles of tris (2,2′-bipyridine) ruthenium(II) hexafluorophosphate

The electrochemical behaviour of tris(2,2′-bipyridine)ruthenium(II) hexafluorophosphate (Ru(II)) microparticles, immobilised on a graphite electrode and adjacent to an aqueous electrolyte solution, has been studied by cyclic voltammetry and an in situ spectroelectrochemical technique. The solid Ru(II) complex exhibits one reversible redox couple with a formal potential (E_f) of 1.1 V versus Ag¦AgCl. The continuous cyclic voltammetric experiments showed that the Ru(II) microparticles are stable during the electrochemical conversions. The in situ spectroelectrochemical study showed that the absorbance at 463 nm decreased due to the oxidation of Ru(II) to Ru(III). Upon reduction, the growth of absorbance at 463 nm was observed due to the formation of Ru(II) complex and this process was reversible.     

A cyclometallated analogue of tris(2,2′-bipyridine)ruthenium(II)

A cyclometallated analogue of the well-known tris(2,2′-bipyridine)ruthenium(II) cation has been prepared from 2-phenylpyridine. The bis(2,2′-bipyridine)(2-phenylpyridine-C,N)ruthenium(II) cation is readily prepared from [Ru(bipy)₂Cl₂] and 2-phenylpyridine in the presence of silver(I); the spectroscopic and electrochemical properties of this species are compared with those of [Ru(bipy)₃]²⁺.     

Tris(2,2′-bipyridyl)ruthenium(II) electrochemiluminescent determination of ethyl formate

Analytical and Bioanalytical Chemistry - Ethyl formate is extensively used as food flavor, fungicide, and larvicide. It naturally exists in coffee, fruits, honey, brandy, and rum as well as dust...     

Application of Polymer-Embedded Tris(2,2′ Bipyridine-Ruthenium(II) to Photodetection of Oxygen

A Nafion film containing tris(2,2′-bipyridine)ruthenium(II) as a luminescence probe was applied to photodetection of oxygen in a gas by utilizing the luminescence quenching by dioxygen. The linear Stern-Volmer plots of the emission intensity with respect to the oxygen concentration allowed quantitative determination of the oxygen. From the emission decay studied by a single-photon counting method, it was concluded that the quenching of the excited state Ru complex by oxygen proceeds by a conventional dynamic mechanism.     

Determination of Reduced Nicotinamide Adenine Dinucleotide Based on Immobilization of Tris(2,2′‐bipyridyl) Ruthenium(II) in Multiwall Carbon Nanotubes/Nafion Composite Membrane

Abstract

An electrochemiluminescence (ECL) method for reduced nicotinamide adenine dinucleotide (NADH) was proposed by immobilizing tris(2,2′‐bipyridyl) ruthenium(II) (Ru(bpy)₃ ²⁺) in multiwall carbon nanotubes (MWCNTs)/Nafion composite membrane that was formed on glassy carbon electrode surface. The electrochemical and ECL behaviors of the immobilized Ru(bpy)₃ ²⁺ were investigated. The cyclic votammogram of the modified electrode in pH 7.0 phosphate buffer solution showed a couple of redox peaks at +1190 and +1060 mV at 100 mV/s. The composite film had a more open structure and a large surface area allowing faster diffusion of Ru(bpy)₃ ²⁺. The presence of MWCNTs resulted in the improved ECL sensitivity and longer‐term stability of the modified electrode. The modified electrode showed a linear response to NADH in the concentration range of 1.0×10^?6 to 1.6×10^?5 M with a detection limit of 8.2×10^?7 M.     

Heteroleptic ruthenium(II) polypyridine complexes with a series of substituted 2,2′-bipyridine ligands

Five substituted-2,2′-bipyridine ligands L, (4-(p-methylphenyl)-6-phenyl-2,2′-bipyridine (L1), 4-(p-bromophenyl)-6-(p-bromophenyl)-2,2′-bipyridine (L2), 4-(p-bromophenyl)-6-phenyl-2,2′-bipyridine (L3), 4-phenyl-6-(p-bromophenyl)-2,2′-bipyridine (L4), and 4-(p-fluorophenyl)-6-(p-fluorophenyl)-2,2′-bipyridine (L5) were synthesized by stepwise formation. Reaction of cis-[RuCl₂(bpy)₂]?2H₂O or cis-[RuCl₂(phen)₂]?2H₂O and the substituted-2,2′-bipyridine ligands in the presence of KPF₆ afforded the corresponding cationic polypyridine-ruthenium complexes of the type [(bpy)₂Ru(L)](PF₆)₂ (bpy = 2,2′-bipyridine, 1–5) or [(phen)₂Ru(L)](PF₆)₂ (phen = 1,10-phenanthroline, 6–10), respectively. All complexes have been spectroscopically characterized by UV–vis, luminescence, and electrogenerated chemiluminescence. The structures of 1?CH₃COCH₃, 3?CH₃COCH₃, 5?2CH₃COCH₃, 6, 8, 9, and 10 have been determined by single-crystal X-ray diffraction.     

Synthesis and enantiomer separation of a modified tris(2,2′-bipyridine)ruthenium(II) complex

The chiral [5-(4-hydroxybutyl)-5′-methyl-2,2′-bipyridine]-bis(2,2′-bipyridine)-ruthenium(II)-bis(hexafluoroantimonate) complex 3 was prepared and characterized by different NMR techniques and successfully separated into enantiomers by electrokinetic chromatography using anionic carboxymethyl-β-cyclodextrin as chiral mobile phase additive (CMPA). The optimum separation conditions were obtained with 40 mM borate buffer at pH 9.5 and 7.5 mg/mL of the chiral selector at 20°C.     

High-Performance Liquid Chromatographic Determination of Quinolizidine Alkaloids in Radix Sophora Flavescens Using Tris(2,2′-Bipyridyl)Ruthenium(II) Electrochemiluminescence

Electrogenerated chemiluminescences (ECLs) of quinolizidine alkaloids including matrine (MT), sophocarpine (SC), and sophoridine (SRI) are studied. The light emission is caused by an electro-oxidation reaction between Ru(bpy)₃²⁺ and the tertiary amino group on the alkaloid compounds. A thin-layer flow cell equipped with a glassy carbon disk electrode (22.1mm²) at the potential of ⁺1.30V (vs. Ag/AgCl) was applied for ECL observation. MT, SC and SRI were separated and quantitatively determined within 25min by an ODS-80 Ts reversed-phase column with a mobile phase containing 80mmolL^–1 NaH₂PO₄–K₂HPO₄ buffer+acetonitrile (7:3)+40mmolL^–1 sodium dodecyl sulfate (pH 6.5). The determination limit at an S/N of 3 ranged from 3×10^–9gmL^–1 for MT, 6×10^–9gmL^–1 for SC and 1×10^–9gmL^–1 for SRI. The recoveries are from 92 to 108%, with repeatability ranging from 1.3 to 4.5% (relative standard deviation). The method was successfully applied to the determination of quinolizidine alkaloids in Sophora flavescens samples.     

Hexafluorophosphate salts of bis and tetrakis(2,2′-bipyridine)lead(II) complexes

Both bis- and tetrakis-substituted 2,2′-bipyridine complexes of lead(II), [Pb(bpy)₂](PF₆)₂ and [Pb(bpy)₄](PF₆)₂ · bpy, respectively, have been characterized by X-ray crystallography as hexafluorophosphate salts when three equivalents of bipyridine is combined with Pb(NO₃)₂ in aqueous solution prior to metathesis. The tetrakis-substituted product, [Pb(bpy)₄](PF₆)₂ · bpy, shows an unusual combination of intramolecular and intermolecular π-stacking of two of the bipyridine ligands throughout the crystal. Incomplete metathesis also produces a catenated, mixed-anion complex, [Pb(bpy)₂(µ-NO₃)](PF₆), where the nitrate bridges lead(II) metal centers to form a 1-D coordination polymer. If metathesis is carried out using perchlorate, a known [Pb(bpy)₂](ClO₄)₂ analog is produced along with [bpyH](ClO₄), which has not been previously characterized by X-ray crystallography.     

Structural characterization of copper (II) tetradecanoate with 2,2′-bipyridine and 4,4′-bipyridine to study magnetic properties

This paper presents synthesis, structural characterization and spintronic applications of copper (II) tetradecanoate derived magnetic complexes. The complexes were prepared by a chemical reaction between [Cu₂(CH₃(CH₂)₁₂COO)₄](EtOH)₂ and 2,2′-bipyridine-4,4′-bipyridine ligands respectively. The complexes were further reacted between the product of the first reaction and 4,4′-bipyridine-2,2′-bipyridine respectively. The structural characterization techniques included elemental analysis, Fourier transformed infrared spectroscopy (FTIR), Ultra-violet–Visible (UV–Vis) spectroscopy, polarized optical microscopy, magnetic moment and thermogravimetric analysis. The structural and characterization results suggested that the synthesized complexes were binuclear and mononuclear covalent complexes of copper(II) with structural formulas [Cu₂(η²-(OOCR)₄](4,4′-bpy)2H₂O] and [Cu(η¹-(OOCR)₂(2,2′-bpy) (4,4′-bpy)] respectively.     

Photochemistry of tetramethyl(2,2′-bipyridine)platinum(IV)

It is shown that photolysis of [PtMe₄(bipy)] using incident radiation with λ 436 or 473 nm occurs with high quantum efficiency of 0.8–1.0 to give homolysis of a methylplatinum bond; this has allowed a study of the chemical reactions of the [PtMe₃(bipy)] radical.     

Synthesis and Characterization of Tris(2,2′-bipyridine) and tris(1,10-phenanthroline) Copper(II) Hexafluorophosphate. Crystal Structure of the Phenanthroline Complex

The tris-(bidentate)chelate complexes [Cu(NN)₃](PF₆)₂ where NN=2,2'-bipyridine or 1,10-phenanthroline have been isolated as secondary products in the reaction between the dimers [{Cu(NN)}₂(μ-OH)₂](PF₆)₂·2H₂O and di-2-pyridylketone. the X-ray crystal structure of [Cu(phen)₃](PF₆)₂ showed a distorted octahedral C ₂ geometry around teh metal atom, with two Cu-N distances being much longer than the other four. Magnetic susceptibility measurements (in the 4.4-290K range) correspond, in both cases, to a d⁹ configuration without significant magnetic interaction. A signal (g=2.102) was observed in the EPR spectrum of the bipy complex and the two axial components were resolved for the phen complex, with g_||=2.249, g_⊥=2.083 and A_||=137 x 10^-4cm^-1. In this case also a signal at g=2.128 is observed.     

Structure and properties of di-μ-acetato-dichlorobis(2,2′-bipyridine)dirhodium(II)-trihydrate

Reduction of [Rh₂(-OAc)₂(bpy)₂(H₂O)₂](OAc)₂ and [Rh₂Cl₂(-OAc)₂(bpy)₂] · 3H₂O complexes with ethanol and [Cr₂(OAc)₄(H₂O)₂] has been investigated using e.p.r. and u.v.–vis. spectra. The results indicate that stable complexes containing the [Rh₂ ³⁺] entity are not formed. The X-ray structure of [Rh₂Cl₂(-OAc)₂(bpy)₂] · 3H₂O has been determined. Coordination around the Rh atom is in the form of a distorted octahedron. The complex shows an almost ideal eclipsed conformation. The equatorial coordination sites are occupied by bridging carboxylato ligands and 2,2-bipyridine and axial positions by the Cl ligand and the rhodium atom. The Rh–Rh distance is 2.574 Å.     

Tris (2,2′-bipyridyl)ruthenium(II) electrogenerated chemiluminescence in analytical science

Ru(bpy) ₃ ²⁺ electrogenerated chemiluminescence (CL) has rapidly gained importance as a sensitive and selective detection method in analytical science. The Ru(bpy) ₃ ²⁺ ECL is observed when Ru(bpy) ₃ ³⁺ reacts with Ru(bpy) ₃ ⁺ and yields an excited state Ru(bpy) ₃ ^2+* . ECL emission can also be obtained when a variety of oxidants and reductants react with the reduced or oxidized forms of Ru(bpy) ₃ ²⁺ . Either the reductant or the oxidant can be treated as an analyte. The Ru(bpy) ₃ ²⁺ ECL is used as a detection method for the determination of oxalate and a variety of amine-containing analytes without derivatization in flowing streams such as flow injection and HPLC. When the ECL format is used as a detector for HPLC, unstable post-column reagent addition can often be eliminated and, the problems of both sample dilution and band broadening can be avoided because the Ru(bpy) ₃ ³⁺ species are generatedin situ in the reaction/observation flow cell. Since NADH is sensitively detected with the Ru(bpy) ₃ ²⁺ ECL, many clinically important analytes can be detected by coupling them to dehydrogenase enzymes that utilize -nicotinamide adenine cofactors to convert NAD⁺ to NADH. Ru(bpy) ₃ ²⁺ -derivatives are used as CL labels for immunoassay and PCR assay with Ru(bpy) ₃ ²⁺ /tripropylamine ECL system. The Ru(bpy) ₃ ²⁺ ECL label can be sensitively determined at subpicomolar concentrations, along with an extremely wide dynamic range of greater than six orders of magnitude. Furthermore, it can eliminate disposal and lifetime problems inherent in radio immunoassays. In this paper, basic principles of the Ru(bpy) ₃ ²⁺ ECL are discussed. In addition, analytical applications of the Ru(bpy) ₃ ²⁺ ECL are illustrated with examples.     

Effect of Electron-Donating/Withdrawing for Hydroxyl Carboxylic Acid on the Tris(2,2,-bipyridyl) Ruthenium(Ⅲ) Chemiluminescence

Since 1966 Hercules and Lytle first reported visible light was generated upon a reduction of tris(2,2'-bipyridyl) ruthenium(Ⅲ), Ru(bpy)₃³⁺, with either hydrazine or hydroxide ion.     

Kinetics and thermodynamics of solvolysis of tris-(2,2′-bipyridine)-iron(II) perchlorate in dimethylsulphoxide

Summary Diluting a concentrated solution of [Fe(bipy)₃](ClO₄)₂ in DMSO causes the complex to dissociate. First order kinetics have been followed, with activation parameters of H = 26.69 ± kcal mol^–1 and S = 17.1 ± 1.3 cal K^–1 mol^–1. Comparing rate data in neutral DMSO with those in the presence of acid provides information about the reactivity of the first formed monodentate intermediate. This is more likely to dissociate to [Fe(bipy)₂-(DMSO)₂]²⁺ than undergo ring closure and reform the parent complex than in water. In DMSO, in the presence of added 2,2-bipyridine at 30.0° C, dissociation is not complete. The reaction is first order, and rate constants increase linearly with added ligand due to an increasingly significant back reaction. Kinetic and static derived values for the third formation constant of [Fe(bipy)₃]²⁺ agree well, and are smaller than in water. The origins of the reactivity differences in the two solvents are discussed.