Mössbauer Spectroscopic Investigation of FeII and FeIII 3,4,5‐Trihydroxybenzoates (Gallates) – Proposed Model Compounds for Iron‐Gall Inks

Iron gallates with iron in the oxidation states Fe²⁺ and Fe³⁺ were prepared and studied by Mössbauer spectroscopy, X‐ray diffraction, and IR spectroscopy. Fe^III 3,4,5‐trihydroxybenzoate (gallate) Fe(C₇O₅H₄) · 2H₂O, whose structure was first determined by Wunderlich, was obtained by the reaction of gallic acid and metallic iron or by oxidation of the Fe^II gallate, which was obtained by the reaction of ferrous sulfate with 3,4,5‐trihydroxybezoic acid (gallic acid) under anoxic conditions. Trials to reproduce the hydrothermal preparation method of Feller and Cheetham show that the result depends crucially on the free gas volume in the reaction vessel. If there is no free volume one obtains the same Fe^III gallate as in the other preparation methods. With a large free volume another compound was found to form whose composition and structure could not be determined. It could be specified only by Mössbauer spectroscopy. Fe^III gallate, the Fe^II gallate, and the new phase show magnetic ordering at liquid helium temperature.     

新型超支化聚芳酰胺的合成及表征

以3，5—二硝基苯甲酰氯和对氨基苯甲酸为原料，经两步反应合成了新型AB2型单体4—(3，5-二氨基苯甲酰氨基)苯甲酸。在溶液中通过自缩聚反应合成了新型超支化聚芳酰胺，将其活性端氨基与酰氯反应，经原位改性合成了五种封端的超支化聚芳酰胺，并利用IR、^1HNMR、DSC及TG等方法对所合成的六种新型超支化聚合物的结构和性能进行了表征与测试。     

End-capping of conjugated thiophene-benzene aromatic systems

The synthesis of end-capped thieno[3,2-f:4,5-f′]bis[1]benzothiophene was achieved from thiophene and 2,5-thiophenedicarboxaldehyde. Specifically, hexyl and dodecyl end-capping groups conferred reversible redox behavior as evidenced by cyclic voltammetry with oxidation potentials of 0.73 V versus Fc/Fc⁺ couple. An extensive spectrophotometric analysis is reported.     

Thermal and dynamic mechanical properties of poly(propylene carbonate)

Summary Thermal and dynamic mechanical properties of carbon dioxide and propylene oxide alternative copolymer, poly(propylene carbonate) (PPC), and the end-capped PPC with maleic anhydride were investigated by means of TG and DMA. A master curve of the storage modulus vs. frequency can be deduced from the isochronal curves. Physical parameters of both plain and MA end-capped PPC were discussed. The results showed that for maleic anhydride (MA) end-capping PPC, an improvement of its thermal stability and mechanical properties accompanied with some modifications of the viscoelastic behavior were obtained.     

Preparation and Enantioseparation Property of Chiral Stationary Phases Based on Cellulose Tris(3,5-dimethylbenzoate)——A New Way to Prepare Polysaccharide-coating Type Chiral Stationary Phases

A new method to prepare polysaccharide-coating type chiral stationary phases （CSPs） was developed in this work. As a typical example, naked silica gel was coated by cellulose, which was then derivatized with 3,5-dimethylbenzoyl chloride to afford cellulose tris（3,5-dimethylbenzoate）-silica gel （CTDBS） complex. The silanols on CTDBS were end-capped with 3- aminopropyltriethoxysilane to obtain CSP 1. The amino groups on CSP 1 were further end-capped with 3,5-dimethylbenzoyl chloride to give CSP 2. The silanols on CTDBS were end-capped with methyltrimethoxysilane to yield CSP 3. CSPs 1-3 were characterized by FTIR, solid-state 13C-NMR and elemental analysis. The enantioseparation abilities of CSPs 1-3 were evaluated with structurally various chiral analytes. The enantioseparation results demonstrated that the end-capping moieties on CSPs 1 and 2 significantly affected enantioseparation. In addition, the effect of the structures of chiral analytes and end- capping moieties on the retention factors and the resolutions was discussed.     

Photochemical reactions of a dimethacrylate compound containing a chalcone moiety in the main chain

We synthesized the new photosensitive oligomer containing a chalcone moiety in the main chain by end-capping reaction of diepoxide compound with methacrylic acid. The chalcone-epoxy oligomeric compound was synthesized with 4,4^′-dihydroxychalcone and epichlorohydrin. Investigation of the photosensitivity of the newly synthesized chalcone oligomer was carried out by using UV-Vis absorption and infrared spectroscopies under UV exposure. We observed the photodimerization behavior under UV irradiation. At the same time, we could also observe the photopolymerization of the compound with a trace amount of dimethoxyphenyl acetophenone. Thermal properties of UV-cured dimethacrylate compounds were also studied.     

Development of an Advanced Process for Manufacturing Polyacetal Resin

Abstract

An advanced process for manufacturing polyacetal resin has been developed. First, a new technology for the production of highly concentrated aqueous formaldehyde was developed by oxidizing methylal. Whereas the oxidation of methanol yields 1 mol water per mole formaldehyde, methylal oxidation produces only 1 mol water for every 3 mol formaldehyde. Thus, the output from methylal oxidation is more than 70% formaldehyde, compared with 55% from methanol oxidation. Second, a new extraction distillation process for formaldehyde purification was developed in order to get highly purified formaldehyde directly from formalin. By using highly purified formaldehyde, an end-capped polymer was obtained in the presence of acetic anhydride as a chain transfer or end-capping agent during polymerization. Third, the relatively high formaldehyde concentration enhances the formation of trioxane. Purified trioxane is copolymerized with ethylene oxide in the presence of an end-capping agent to get an end-capped polymer with high thermal stability. Two new intermediates from the initiation reaction of the copolymerization, 1,3,5,7-tetraoxacyclononane (TOCN) and 1,3,5,7,10-pentaoxacyclododecane (POCD), were isolated, and a new initiation mechanism was proposed. Fourth, the world's first acetal block copolymer was commercialized by the polymerization of formaldehyde in the presence of a lubricant functional polymer having an active hydrogen atom. This acetal block copolymer exhibits super lubrication properties.     

Heterocyclic 1,3,4-oxadiazole as columnar core

The synthesis, characterization and mesomorphic properties of a new type of liquid crystalline compound, the 2,5-bis(3,4,5-trialkoxyphenyl)-1,3,4-oxadiazoles, 3a-3h, are reported. These heterocyclic compounds are derived from unsaturated 1,3,4-oxadiazole as the core group, and obtained by the condensation reaction of 3,4,5-trialkoxybenzoic acid N-(3,4,5-trialkoxybenzoyl)-hydrazides and phosphorus oxychloride in toluene under reflux. All compounds were characterized by ¹H and ¹³C NMR spectroscopy, and elemental analysis. The mesomorphic properties of these and the related compounds 1, 2 were characterized and studied by differential scanning calorimetry and polarizing optical microscopy. The formation of columnar mesophases was found to be dependent on the numbers of alkoxy sidechains. The compounds 3 exhibited hexagonal columnar (Col_h) phases, however compounds 1, 2 formed crystalline phases. Compounds 3b-3e with shorter carbon chains were room temperature liquid crystals. Polar induction by nitrogen and/or oxygen atoms on the heterocyclic core ring might be responsible for the formation and better observed mesomorphic properties in this type of compound.     

Chain end analysis of bisphenol A polysulfone and its relation to molecular weight

The preparation of amine-terminated polysulfone by step polymerization of the monomers bisphenol A and dichlorodiphenyl sulfone in the presence of end-capping reagent 4-aminophenol was investigated. A persistent problem with end-capping strategy as applied to step polymerization is the presence of end groups other than those introduced by the end-capping reagent. These unintended end groups, which can persist in the polymer product even when 100% of the end-capping reagent has reacted, are associated with a proportionate decrease in polymer chain length. This situation renders quantitative analysis of a single type of end group invalid as a method for molecular weight determination. The presence of unintended end groups does not appear to correlate with a particular set of reaction conditions; unintended end groups were found to occur in polymerizations conducted under strong base conditions (NaOH), under weak base conditions (K₂CO₃), and with a wide range of monomer feed ratios. A scheme for unambiguous quantification of chain ends and molecular weight for end-capped polysulfone is described. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1309–1316, 1998     

Gallic acid monohydrate

In the crystal structure of the title compound, 3,4,5‐tri­hydroxy­benzoic acid monohydrate, C₇H₆O₅·H₂O, the gallic acid mol­ecule has an intramolecular hydrogen bond involving a pair of hydroxyl groups, and it is also linked to a water mol­ecule by a three‐centre (bifurcated) OW—H?O hydrogen bond. The packing of the mol­ecules is stabilized by intermolecular O—H?O and C—H?O hydrogen bonds.     

Free radicals produced by the oxidation of gallic acid: An electron paramagnetic resonance study

Background  

Gallic acid (3,4,5-trihydroxybenzoic acid) is found in a wide variety of plants; it is extensively used in tanning, ink dyes, as well as in the manufacturing of paper. The gallate moiety is a key component of many functional phytochemicals. In this work electron paramagnetic spectroscopy (EPR) was used to detect the free radicals generated by the air-oxidation of gallic acid.     

Synthesis,characterization and thermooxidative stability of addition polymers from 1,4,5,8-tetrahydro-1,4;5,8-diepoxyanthracene and anthracene end-capped imide oligomers

A series of Diels–Alder addition-type copolymers prepared from 1,4,5,8-tetrahydro-1,4;5,8-diepoxyanthracence and anthracene end-capped 6F-PDA imide oligomers were characterized. The composition of the anthracene end-capped imide oligomers was found to be sensitive to monomer molar ratios and the mode of monomer addition. The resistance of the copolymer to thermooxidative degradation at 316 and 371°C was compared with a similar commercial polymer called Avimid-N prepared from 4,4′-hexafluoroisopropylidene-2,2′ bis(phthalic acid anhydride) and para-and meta-phenylene diamine, abbreviated 6F-PDA. There are strong indications that the copolymers undergo degradation initially by unzipping the diepoxyanthracene unit from the anthracene end-capped 6F-PDA oligomer unit (Avimid-N like repeat unit), followed by a slower degradation of the more stable residual 6F-PDA unit. © 1993 John Wiley & Sons, Inc.     

Selective degradation of silicone copolymers and networks

An exhaustive end-capping method for the analysis of silicone copolymers and networks using hexamethyldisiloxane in the presence of trifluoromethanesulfonic acid was demonstrated. The hard block of a polymide-co-polysiloxane was isolated by the equilibration of the copolymer with a large excess of hexamethyldisiloxane and subsequently examined by size exclusion chromatography. Addition cured polyimidesiloxane networks were also equilibrated with an excess of the disiloxane and the resulting oligmoers characterized by gas chromatography of the end-capped fragments.     

Benefits of Innovative and Fully Water-Compatible Stationary Phases of Thin-Film Microextraction (TFME) Blades

Octadecyl (C₁₈) groups are arguably the most popular ligands used for preparation of solid phase microextraction (SPME) devices. However, conventional C₁₈-bonded silica particles are not fully compatible with the nearly 100% aqueous composition of typical biological samples (e.g., plasma, saliva, or urine). This study presents the first evaluation of thin-film SPME devices coated with special water-compatible C₁₈-bonded particles. Device performance was assessed by extracting a mixture of 30 model compounds that exhibited various chemical structures and properties, such as hydrophobicity. Additionally, nine unique compositions of desorption solvents were tested. Thin-film SPME devices coated with C₁₈-bonded silica particles with polar end-capping groups (10 µm) were compared with conventional trimethylsilane end-capped C₁₈-bonded silica particles of various sizes (5, 10, and 45 µm) and characteristics. Polar end-capped particles provided the best extraction efficacy and were characterized by the strongest correlations between the efficacy of the extraction process and the hydrophobicity of the analytes. The results suggest that the original features of octadecyl ligands are best preserved in aqueous conditions by polar end-capped particles, unlike with conventional trimethylsilane end-capped particles that are currently used to prepare SPME devices. The benefits associated with this improved type of coating encourage further implementation of microextractraction as greener alternative to the traditional sample preparation methods.     

3,4,5-三甲氧基苯甲酰腙类化合物的合成与表征

以没食子酸为原料。经烷基化、肼解得3,4,5-三甲氧基苯甲酰肼(2),2与芳香醛进行缩合反应合成了9个新的酰腙化合物。其结构经元素分析。IR,1H NMR和MS表征。     

Determination of S(IV) Oxoanions at Poly[Ru(5‐NO2‐Phen)2Cl] Tetrapyridylporphyrin Glassy Carbon Modified Electrode

Glassy carbon electrodes modified with conducting polymers of Ni(II), Zn(II) and metal free tetraruthenated porphyrin were evaluated for reduction and oxidation processes of S(IV) oxoanions in Na₂SO₃/water‐ethanol at pH 1.0 and 3.5, showing electrocatalytic activity. A Ni(II) film was able to reduce the S(IV) oxoanions selectively in presence of high concentration of gallic acid. The Ni(II) film was also used as an amperometric sensor toward S(IV) oxoanions reduction in white wine samples showing a detection and quantification limit of 1.40 mg L^?1 and 4.68 mg L^?1, respectively. These results are promising for the electrochemical determination of S(IV) using conducting polymers from these macrocycles.     

Determination of Gallic Acid by Flow Injection with Electrochemiluminescent Detection

ABSTRACT

Potential dependent inhibition and enhancement effects of gallic acid on the electrochemiluminescence (ECL) of luminol in alkaline solutions were found. On the basis of the enhancement effect, a flow injection method was developed for the determination of gallic acid. The method was simple, convenient and sensitive. A detection limit of 1.8×10^?8 mol/L, linear range of 3.0×10^?8 - 1.0×10^?4 mol/L, relative standard deviation of 1.0% for eleven measurements of 5.0×10^?6 mol/L of gallic acid was found. This method was successfully applied to determine the content of gallic acid in Chinese gall (moshizi).     

Development of an efficient route to hyperbranched poly(arylene ether sulfone)s

A two‐step route to an AB₂ monomer that underwent polymerization via nucleophilic aromatic substitution to afford hyperbranched poly(arylene ether sulfone)s (HB PAES) was developed. The synthesis of 3,5‐difluoro‐4′‐hydroxydiphenyl sulfone ( 4 ) was accomplished by the reaction of 3,5‐difluorophenylmagnesium bromide with 4‐methoxyphenylsulfonyl chloride, followed by deprotection of the phenol group with HBr in acetic acid. The polymerization of 4 in the presence of 3,4,5‐trifluorophenylsulfonyl benzene or tris(3,4,5‐trifluorophenyl)phosphine oxide as a core molecule afforded HB PAES with number‐average molecular weights ranging from 3400 to 8400 Da and polydispersity index values ranging from 1.5 to 4.8. The presence of cyclic oligomeric species, formed by an intramolecular cyclization process, was a contributing factor to the relatively low molecular weights. The degree of branching (DB) of the HB PAES samples was estimated by a comparison of the ¹⁹F NMR spectra of the polymer samples with those of a series of model compounds, and DB values ranging from 0.51 to 0.70 were determined. The glass‐transition temperatures for the HB PAES samples were in the range of 205–222 °C, as determined by differential scanning calorimetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43:3178–3187, 2005     

Determination of Gallic Acid by Flow Injection Analysis Based on Luminol‐AgNO3‐Ag NPs Chemiluminescence System

A novel flow injection procedure has been developed for the determination of gallic acid based on the enhancement function for luminol‐AgNO₃‐Ag NPs chemiluminescence (CL) system by gallic acid. The enhancement mechanism was proposed for the reinforcing effect of the gallic acid on the CL system. The UV‐vis absorption spectrum and CL emission spectrum were applied to confirm the mechanism. The method is simple, rapid and sensitive with a detection limit of 5×10^?10 g·mL^?1 and a linear range of 8.0×10^?10–1.0×10^?7 g·mL^?1. The relative standard deviation (RSD) is 1.3% for eleven measurements of 5×10^?8 g·mL^?1 gallic acid. The method has been successfully applied to the determination of gallic acid in Chinese proprietary medicine–Jianmin Yanhou tablets and synthesized samples.     

Crystal Structure of a Hydrated Molecular 1 : 2 Complex of Nicotinamide Adenine Dinucleotide (NAD+) and Gallic Acid: Polar Alignment of the Phenolic Partner Molecules

Nicotinamide adenine dinucleotide (oxidized form, free acid, NAD⁺) was utilized as an auxiliary for polar alignment of gallic acid (=3,4,5‐trihydroxybenzoic acid, GA) in the crystalline molecular complex NAD⁺?(GA)₂?(H₂O)₅. In this adduct, NAD⁺ takes up a novel U‐shaped conformation accepting a GA molecule to give rise to a pincer‐type π‐complex. With the assistance of further GA molecules, these pincer assemblies build up infinite donor? acceptor π‐stacks in the crystal. An extended network of H‐bonds among the multitude of pertinent active functional groups and the water molecules supports the crystal structure. These findings may imply noteworthy material properties, in particular nonlinear optical effects, and might also serve to trigger inspiring biochemical connections to be made. The crystal structure of anhydrous GA is also reported, which is centrosymmetric and non‐polar.