Effect of slow-solvent-vapour treatment on performance of polymer photovoltaic devices

In this work, enhanced poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PCBM) bulkheterojunction photovoltaic devices are achieved via slow-solvent-vapour treatment. The correlations between the morphology of the active layer and the photovoltaic performance of polymer-based solar cell are investigated. The active layers are characterized by atomic force microscopy and optical absorption. The results show that slow-solventvapour treatment can induce P3HT self-organization into an ordered structure, leading to the enhanced absorption and efficient charge transport.     

Effect of size and morphology of Au nanostructures on boosting performance of organic photovoltaic devices: Plasmonic and non-plasmonic effects

We fabricated organic photovoltaic (OPV) devices containing various Au nanostructures mixed with hole-collecting buffer layer. The presence of the Au nanostructures results in enhancement of the external quantum efficiencies (EQE) at dissimilar wavelengths of visible light, which can be attributed to the modulated plasmonic absorption frequency of the Au nanostructures. In addition to this plasmonic effect induced by visible light absorption, an increase in the EQE was also found upon UV excitation, which can be attributed to scattering effects induced by Au particles. The optical response pattern of organic photovoltaic devices can be modulated in a wide range of visible and UV wavelengths, by controlling sizes and shapes of the Au nanostructures.     

Effect of sorbitol doping in PEDOT:PSS on the electrical performance of organic photovoltaic devices

Organic photovoltaic cells have important advantages, such as low cost and mechanical flexibility. The conducting polymer poly(3,4 ethylenedioxy-thiophene):poly(styrene sulfonate) (PEDOT:PSS) has been widely used as an interfacial layer or a polymer electrode in polymer electronic devices, such as photovoltaic devices and light-emitting diodes. In this report, we discuss the direct current (DC) conductivity of PEDOT:PSS films containing various weight ratios of sorbitol dopant. The work function is shown to steadily decrease with increasing dopant content. With different dopant contents, illuminated current–voltage photovoltaic characteristics were observed. Ultraviolet photoelectron spectroscopy (UPS) analysis revealed that the work function of the PEDOT:PSS was affected by its sorbitol content. The morphologies of the doped PEDOT:PSS films were characterized by atomic force microscopy (AFM). For the device fabrication, we made organic photovoltaic cells by a spin-coating process and Al deposition by thermal evaporation. The sorbitol dopant is able to improve the efficiency of the device.     

Effect of buffer layers on performance of organic photovoltaic devices based on copper phthalocyanine-perylene dye heterojunction

The work presents the results of research on the systems formed from thin films of copper phthalocyanine (CuPc), N-N′-dimethylperylene-3,4,9,10-dicarboximide (MePTCDI), electrodes of ITO and Ag, and from buffer layers: MoO₃ at ITO and BCP at Ag. We have observed the effect of each buffer layer on voltage dependence of dark current and photocurrent, and on open circuit voltage-light intensity relationship. The system with both buffer layers exhibited the highest values of open circuit voltage and fill factor. The buffer layers improve transport of charge carriers within near-electrode regions, reduce dissociation of excitons on electrodes and reveal processes of charge carrier generation and recombination within the CuPc/MePTCDI junction.     

Bathocuproine/Ag复合电极对于聚合物光伏器件效率和稳定性的影响

采用Bathocuproine/Ag (BCP/Ag)复合电极代替Ca/Al复合电极, 制备PTB7:PC71BM 作为光敏层的聚合物光伏器件, 并通过改变BCP薄膜厚度来研究BCP/Ag复合电极对于器件光电转换器和稳定性的影响. 研究发现: 在光敏层和金属电极之间插入BCP修饰层后, 器件性能得到了显著的改善, 在BCP厚度为5 nm时, 器件的效率达到了6.82%, 且略高于Ca/Al复合电极的器件效率; 相比于采用Ca/Al复合电极的器件, BCP/Ag复合电极增大了器件的短路电流和外量子效率, 使器件效率得到提高; 同时器件的稳定性得到了显著的改善, BCP/Ag 复合电极器件的衰减速率几乎和未插入BCP的器件衰减速率相同, 相对于Ca/Al复合电极器件大幅提高.     

Organic photovoltaic materials and devices

Organic photovoltaic solar cells bere an important potential of development in the search for low-cost modules for the production of domestic electricity. We review the principles and techniques needed for their development: organic semiconductors, their transport properties and photophysical characteristics, photovoltaic molecule and polymer structures, device technologies, electrical and optical behaviour of the cells, state of the art, limitations and perspectives. Despite some recent record efficiencies, research on organic solar cells is still in its infancy when stability and efficiency have to be compared with the performances of silicon cells. A nominal 10% solar efficiency is the research target for the next few years. To cite this article: J.-M. Nunzi, C. R. Physique 3 (2002) 523–542.     

Effect of polar aprotic solvents on hydroxyethyl cellulose-based gel polymer electrolyte

Quasi-solid bioelectrolytes based on hydroxyethyl cellulose (HEC) and sodium iodide (NaI) in three different polar aprotic solvent systems, dimethylformamide (DMF), dimethyl sulfoxide (DMSO), and dimethylacetamide (DMA), were fabricated and characterized. FTIR studies revealed active solvent-ion interactions in DMF-based electrolytes in comparison to DMA and DMSO. The effect of the solvent system on the crystallinity of HEC gel electrolytes was more significant at low NaI concentration. In each solvent system, the highest ionic conductivity was achieved at 70 wt% NaI and generally DMF-based electrolytes showed higher conductivity than the other solvents. The availability of multiple complexation sites present in DMF is ascribed to improvement in ion mobility and hence conductivity. Rheological analysis was carried out to elucidate the mechanical properties of the gels. Generally, the mechanical strength of the polymer gels was unaffected by the type of solvent.     

Role of surface modification of CdS nanoparticles on the performance of hybrid photovoltaic devices based on p-phenylenevinylene derivate

The role of organic capping ligand of semiconductor nanoparticles in dictating the interfacial charge transfer processes in hybrid semiconductor nanoparticles/polymer-based photovoltaic devices is investigated. Morphology, optical and structural study of the CdS nanoparticles and the hybrid material were accomplished using X-ray diffraction (XRD), absorption (UV–vis), atomic force microscopy (AFM), transmission electron microscopy (TEM), photoluminescence (PL) and time resolved photoluminescence spectroscopy (PLRT). A broad band absorption in UV–visible region and considerable fluorescence quenching of MEH-PPV in the composites are noted indicating a photo-induced charge transfer and dissociation of excitons. Time-resolved photoluminescence measurements indicating decreased lifetime further confirm this process. The solar cells open-circuit voltage and short-circuit current were improved using thiophenol modified CdS nanoparticles as electron acceptor in comparison to MEH-PPV only device demonstrating a promising approach to enhance charge transport in the hybrid nanoparticles–polymer composite photovoltaic cells (PV).     

Influence of pyrazole on the photovoltaic performance of dye-sensitized solar cell with polyvinylidene fluoride polymer electrolytes

We investigate the influence of the pyrazole content on the polyvinylidene fluoride (PVDF)/KI/I₂ electrolytes for dye-sensitized solar cells (DSSCs). The solid polymer electrolyte films consisting of different weight percentage ratios (0 20, 30, 40, and 50 %) of pyrazole doped with PVDF/KI/I₂ have been prepared by solution casting technique using N,N-dimethyl formamide (DMF) as a solvent. The as-prepared polymer electrolyte films were characterized by various techniques such as Fourier transform infrared spectroscopy (FT-IR spectroscopy), differential scanning calorimetry (DSC), X-ray diffractometer (XRD), alternate current (AC)-impedance analysis, and scanning electron microscopy (SEM). The 40 wt% pyrazole-PVDF/KI/I₂ electrolyte exhibited the highest ionic conductivity value of 9.52?×?10^?5 Scm^?1 at room temperature. This may be due to the lower crystallinity of PVDF and higher ionic mobility of iodide ions in the electrolyte. The DSSC fabricated using this highest ion conducting electrolyte showed an enhanced power conversion efficiency of 3.30 % under an illumination of 60 mW/cm² than that of pure PVDF/KI/I₂ electrolyte (1.42 %).     

Effect of the oligothiophene chain length on the performance of organic photovoltaic cells

We investigate photovoltaic cells based on α-oligothiophene molecules with different chain lengths nT (n=4,6,8) deposited on a sandwich structure between two electrodes: ITO and Al. From the analysis of the absorption and photocurrent spectrum, we have shown that the structure of the oligothiophene affects considerably the absorbing character of the evaporated film, which is increasingly significant from 4T towards 8T, and a significant photocurrent in agreement with strong absorption in the region Al/nT. Moreover, a theoretical model of Ghosh is used to display the photocurrent origin, proved to be sufficient after adjustment with a random term. Then we deduce that the crystalline order of the film improves the transport of charge and the photocurrent. The results are confirmed by electrical characterization under illumination that shows effectively an influence of the expansion of the molecular chains on the increase in the energy efficiencies and on the performances of organic photovoltaic cells.     

Electrochemically deposited poly(3-methylthiophene) performance in single layer photovoltaic devices

Photovoltaic devices based on electrochemically synthesized poly(3-methylthiophene) PMeT were constructed and characterized. The charge mobility for positive carriers of this polymer is quite high, 4 x 10^-4 cm²/Vs, being attractive for optoelectronic devices. In single layer photovoltaic devices with PMeT active layer electrochemically deposited onto indium-tin oxide substrate with aluminum as top electrode we have obtained short-circuit current density of 0.31 A/m², open-circuit voltage of 1 V and power conversion efficiency of 0.14% at 100 W/m² white light irradiance.Received: 17 October 2003PACS: 73.50.Pz Photoconduction and photovoltaic effects - 73.61.Ph Polymers; organic compounds - 73.50.Gr Charge carriers: generation, recombination, lifetime, trapping, mean free paths - 73.40.Sx Metal-semiconductor-metal structures     

Influence of the morphology of ZnO nanostructures on luminescent and photovoltaic properties

Arrays of ZnO nanorods and nanoplates are synthesized by the hydrothermal and electrochemical methods, respectively. The photoluminescence spectra indicate that the nanoplates have a more defective structure than the nanorods. The obtained ZnO nanostructures are used as the basis to construct dye-sensitized solar cells. The influence of morphology and defectiveness of ZnO nanostructures on the luminescent and photovoltaic properties of the cells is studied.     

Effects of annealing rate and morphology of sol–gel derived ZnO on the performance of inverted polymer solar cells

The effects of annealing rate and morphology of sol–gel derived zinc oxide(ZnO)thin films on the performance of inverted polymer solar cells(IPSCs)are investigated.ZnO films with different morphologies are prepared at different annealing rates and used as the electron transport layers in IPSCs.The undulating morphologies of ZnO films fabricated at annealing rates of 10 C/min and 3 C/min each possess a rougher surface than that of the ZnO film fabricated at a fast annealing rate of 50 C/min.The ZnO films are characterized by atomic force microscopy(AFM),optical transmittance measurements,and simulation.The results indicate that the ZnO film formed at 3 C/min possesses a good-quality contact area with the active layer.Combined with a moderate light-scattering,the resulting device shows a 16%improvement in power conversion efficiency compared with that of the rapidly annealed ZnO film device.     

Effect of flexibility of grafted polymer on the morphology and property of nanosilica/PVC composites

In this study, poly(methyl methacrylate)-grafted-nanosilica (PMMA-g-silica) and a copolymer of styrene (St), n-butyl acrylate (BA) and acrylic acid (AA)-grafted-nanosilica (PSBA-g-silica) hybrid nanoparticles were prepared by using a heterophase polymerization technique in an aqueous system. The grafted polymers made up approximately 50 wt.% of the resulted hybrid nanoparticles which showed a spherical and well-dispersed morphology. The silica hybrid nanoparticles were subsequently used as fillers in a poly(vinyl chloride) (PVC) matrix to fabricate PVC nanocomposite. Morphology study of PVC nanocomposites revealed that both PMMA- and PSBA-grafted-silica had an adhesive interface between the silica and PVC. The tensile strength and elongation to break were found to be improved significantly in comparison with that of untreated nanosilica/PVC composites. Finally our results clearly demonstrated that the properties (e.g. chain flexibility, composition) of the grafted polymer in the hybrid nanoparticles could significantly affect the dispersion behavior of hybrid nanoparticles in PVC matrix, dynamic mechanical thermal properties and mechanical properties of the resulted PVC composites.     

Effect of cross-linkable polymer on the morphology and properties of transparent multi-walled carbon nanotube conductive films

In this study, we fabricated optically transparent and electrically conductive multi-walled carbon nanotube (MWCNT) thin films using a spray-coating technique. The transparency and the electrical resistance of thin film are dependent on the nanotube content deposited on the polyethylene terephthalate (PET) substrate. Poly(acrylic acid) (PAA) and poly(N-vinyl pyrrolidone) (PVP) were used as adhesion promoters to improve MWCNT coating more significantly. The cross-linked polymer resulted in a superior bond between the MWCNTs and the substrates. The surface electrical resistance was significantly lower than the original sheet after nitric acid (HNO₃) treatment because of the removed surfactant and the increased interconnecting networks of MWCNT bundles, thus improving the electrical and optical properties of the films. Stronger interaction between the MWCNTs and the substrates resulted in lower decomposition of the polymer chain and less amounts of MWCNTs separated into the HNO₃ solution. The lower sheet electrical resistance of PVP/PAA-g-MWCNT conductive films on the PET substrate was because of a more complete conductive path with the cross-linked polymer than that without. Such an improved sheet of electrical resistance varied from 8.83 × 10⁴ Ω/□ to 2.65 × 10³ Ω/□ with 5.0 wt.% PVP/PAA-g-MWCNT sprayed on the PET after acid treatment.     

Novel techniques for the optical characterization of photovoltaic materials and devices

By means of newly designed optical instrumentation, mainly based on the use of integrating spheres, the fundamental optical properties of photovoltaic materials and devices (solar cells, modules) have been investigated. Relevant results concerned the optical loss (reflectance) of devices and the transmittance of semitransparent materials, used in the window sheets, under both direct and diffuse light. All the developed techniques are non-destructive and allow the characterization of selected areas of the samples. The use, however, of automatic translation stages makes easy to perform an optical and, in some cases, electrical mapping of the entire sample.     

Effect of temperature on the conductivity, structural, and morphology of PVA-based alkaline solid polymer electrolyte

Alkaline polymer electrolytes (ASPE) have been prepared by using poly(vinyl alcohol) (PVA) polymer and which different weight percentages of potassium hydroxide (KOH), ceramic filler (α-Al₂O₃), and propylene carbonate (PC) have been added. The pure PVA/H₂O weight ratio (1.00:1.49), the PVA/KOH/H₂O (1.00:0.67:2.22), the PVA/KOH/α-Al₂O₃/H₂O (1.00:0.67:0.09:7.56), and PVA/KOH/α-Al₂O₃/PC/H₂O (1.00:0.67:0.09:2.64:1.32) were studied. The hysteresis phenomena in the conductivity temperature of ASPE were investigated. The polymer electrolytes prepared were characterized using X-ray diffraction and scanning electron microscopy.     

Enhanced performance in organic photovoltaic devices with KMnO4 solution treated indium tin oxide anode modification

The properties of poly(3-hexylthiophene):(6,6)-phenyl C₆₁ butyric acid methyl ester (P3HT:PCBM) organic photovoltaic devices (OPVs) with indium tin oxide (ITO) anode treated by KMnO₄ solution are investigated. The optimized KMnO₄ solution has a concentration of 50 mg/L, and ITO is treated for 15 min. The modification of ITO anode results in an enhancement of the power conversion efficiency (PCE) of the device, which is responsible for the increase of the photocurrent. The performance enhancement is attributed to the work function modification of the ITO substrate through the strong oxygenation of KMnO₄, and then the charge collection efficiency is improved.     

Synthesis of silicon nanocomposite for printable photovoltaic devices on flexible substrate

Renewed interest has been established in the preparation of silicon nanoparticles for electronic device applications. In this work, we report on the production of silicon powders using a simple ball mill and of silicon nanocomposite ink for screen-printable photovoltaic device on a flexible substrate. Bulk single crystalline silicon was milled for 25 h in the ball mill. The structural properties of the produced silicon nanoparticles were investigated using X-ray diffraction (XRD) and transmission electron microscopy. The results show that the particles remained highly crystalline, though transformed from their original single crystalline state to polycrystalline. The elemental composition using energy dispersive X-ray florescence spectroscopy (EDXRF) revealed that contamination from iron (Fe) and chromium (Cr) of the milling media and oxygen from the atmosphere were insignificant. The size distribution of the nanoparticles follows a lognormal pattern that ranges from 60 nm to about 1.2 μm and a mean particle size of about 103 nm. Electrical characterization of screen-printed PN structures of the nanocomposite formed by embedding the powder into a suitable water-soluble polymer on Kapton sheet reveals an enhanced photocurrent transport resulting from photo-induced carrier generation in the depletion region with energy greater that the Schottky barrier height at the metal-composite interface.