测定食品及生物样品中微量锡的消化方法探讨

采用干灰化、硝酸-高氯酸、硝酸-硫酸-高氯酸和用硝酸过氧化氢微波消解4种消化方法消化样品,氢化物发生-原子荧光光谱法测定食品及生物样品中微量锡。方法线性范围为20.0μg.L-1以内,相关系数为0.999 8,经过比较,微波消解和硝酸-硫酸-高氯酸消解方法较理想,回收率分别为98.2%~101.4%和97.4%~102.8%,相对标准偏差分别为2.39%~3.85%和3.25%~3.82%。只测定锡时,微波消解和硝酸-硫酸-高氯酸消解法均可,但如锡与其他微量元素需要同时测定,为避免引入有干扰的硫酸根,以用硝酸-过氧化氢微波消解为好。     

土壤中铅的分析方法比对

对不同的样品消解方法及电感耦合等离子体质谱、电感耦合等离子体原子发射光谱、石墨炉原子吸收光谱法测定土壤中铅的测定结果进行比对。采用电热板、微波及水浴3种加热方式,选择硝酸、氢氟酸、双氧水、王水、高氯酸、盐酸的不同组合进行土壤样品消解,通过分析测定值的精密度和准确度,考察消解体系对电感耦合等离子体质谱、电感耦合等离子体发射光谱、石墨炉原子吸收光谱法测定结果的影响。结果表明采用电感耦合等离子体质谱法测定土壤中的铅,最适宜的消解体系是硝酸-氢氟酸-高氯酸(微波加热),采用电感耦合等离子体原子发射光谱法测定最适宜的消解体系是硝酸(电热板加热),采用石墨炉原子吸收光谱法测定最适宜的消解体系是硝酸-盐酸-高氯酸(微波加热)。电感耦合等离子体质谱法的精密度和准确度优于另外两种方法。     

微波消解-电感耦合等离子体质谱法测定土壤中10种重金属元素

利用硝酸、盐酸、氢氟酸混合液和微波消解仪密闭消解样品，建立了一种微波消解-电感耦合等离子体质谱（ICP-MS）法同时测定土壤中铜、铅、锌、锰、钒、铬、镉、镍、锡、铊10种重金属的分析方法。取0.100 0 g土壤样品于消解罐中，采用4 mL硝酸+1 mL盐酸+1 mL氢氟酸消解体系按照设定程序进行微波消解，冷却，定容后利用电感耦合等离子体质谱法进行。结果表明，以铑元素作为内标，10种重金属元素在一定的质量浓度范围内与其信号强度呈线性关系，线性相关系数均不小于0.999 8，检出限为0.010～0.92 mg/kg。对3种标准物质进行测定，测定值的相对标准偏差为2.89%～7.72%(n=10)，相对偏差为-5.95%～4.11%。该方法分析流程简单，工作效率高，检出限低，适合大批量土壤样品的多元素同时分析。     

石墨消解–火焰原子吸收光谱法测定土壤和沉积物中铜、锌、镍、铬

建立石墨消解–火焰原子吸收光谱法测定土壤和沉积物中铜、锌、镍、铬4种重金属的含量。采用盐酸–硝酸–氢氟酸–高氯酸作为消解体系对样品进行消解,铜、锌、镍以1%硝酸定容,铬以3%盐酸定容,采用火焰原子吸收光谱仪进行测定。铜、锌、镍、铬的质量浓度在0.00~1.00 mg/L范围内与吸光度均呈良好的线性关系,相关系数为0.999 4~0.999 5,方法检出限为0.7~1.5μg/g。测定结果的相对标准偏差为1.8%~3.4%(n=6),样品加标回收率为92.0%~105%。土壤和沉积物标准样品的测定值均在标准值可接受范围内。该方法操作简单、快速,结果准确、可靠,适用于土壤和沉积物样品中铜、锌、镍、铬等金属元素的测定。     

萃取火焰原子吸收分光光度法测定土壤中的镉铊铟银

本实验用HCl-HNO3-HF-HClO4消解样品,KI-MIBK萃取火焰原子吸收分光光度法连续测定土壤样品中的痕量Cd、Tl、In、Ag。方法检出限:镉为0.0052μg/g,铊为0.0156μg/g,铟为0.0199μg/g,银为0.0031μg/g;相对标准偏差(RSD):镉为3.2%,铊为3.7%,铟为4.3%,银为3.3%。使用有机相雾化器,配合空气乙炔大比例试验条件提高了方法灵敏度。方法操作流程简单,可用于批量样品分析。     

微波消解-电感耦合等离子体质谱法(ICP-MS)测定锌精矿中的铟和锗

提出了通过微波消解法消解锌精矿,用电感耦合等离子体质谱法(ICP-MS)测定锌精矿中铟和锗含量的方法。对样品进行了分解方式的选择和质谱干扰扣除以及加标回收实验,实验结果表明,铟的加标回收率在96.26%~98.70%,锗的加标回收率在99.60%~101.0%,铟的检出限为0.001μg/g,锗的检出限为0.02μg/g,验证了方法的可靠性。     

电感耦合等离子体质谱法测定面制食品中铝

采用微波消解和常压消解两种方法对面制食品进行前处理,用电感耦合等离子体质谱法测定面制食品中铝的含量,选择钪作为分析内标元素。结果表明:铝的质量浓度在10.0~250.0μg.L-1范围内呈线性关系,方法的检出限(3s)为3.75μg.L-1,测定下限(10s)为12.5μg.L-1。两种前处理方法所得结果的准确度和精密度均较好,微波消解和常压消解处理样品,加标回收率分别为84.4%~101.2%,85.7%~95.5%;相对标准偏差(n=8)分别为3.0%~7.1%,3.4%~6.6%。     

ICP–MS法测定铅精矿、锌精矿、混合铅锌矿中的铊

建立铅精矿、锌精矿、混合铅锌矿中铊的分析方法。试样采用盐酸、硝酸、硫酸消解,挥发除去硫,沉淀除去大部分铅和硅,用电感耦合等离子质谱(ICP–MS)法测定样品溶液中铊的含量。对基体及主要杂质元素的干扰情况及消除方法进行试验,优化了分析方法。铊含量在0.01~10μg/L的范围内具有良好的线性关系,线性相关系数大于0.999 9,检出限为0.001 8μg/L。测定结果的相对标准偏差为1.42%~3.96%(n=11),加标回收率为92.7%~106.8%。该方法简单、快速、准确,可用于铅锌精矿、混合铅锌矿中铊的测定。     

分类消解-电感耦合等离子体原子发射光谱法测定环境土壤中15种金属元素的含量

测定土壤中铍、锌、钼、铊、钛、锑等6种元素以硝酸-氢氟酸-高氯酸混合酸为消解体系,采用全自动消解法进行消解;测定土壤中钒、锰、钴、镍、铜、镉、钡、铅、铬等9种元素以硝酸-氢氟酸-盐酸混合酸为消解体系,采用微波消解法进行消解。以氩为内标元素校正土壤基体的雾化效率及电离效率。电感耦合等离子体原子发射光谱法(ICP-AES)采用多向观测模式,结合多重谱线拟合技术(MSF)校正光谱干扰,测定环境土壤中上述15种元素的含量,检出限为0.1~3.7 mg·kg~(-1)。按上述方法测定标准样品GSS~(-1)0和GSS~(-1)3,各元素的测定值与认定值吻合,相对标准偏差(n=11)为0.15%~2.6%。以吉林市某河岸土壤为实际测定样品,各元素的测定值与电感耦合等离子体质谱法(ICP-MS)的测定值一致,相对标准偏差(n=11)为1.6%~4.5%。     

电感耦合等离子体原子发射光谱(ICP-AES)法和电感耦合等离子体质谱(ICP-MS)法测定大气降尘中的铅、镉、铬、锌、锰、镍、铜、铊

大气中Pb、Cd、Cr、Mn、Ni、Tl等重金属污染物是目前国内外城市大气污染的主要因子之一,研究大气降尘中重金属元素含量具有重大意义。本文采用盐酸-硝酸混合酸为消解体系,在105℃条件下用电热板消解回流大气降尘样品2小时后定容测定,通过电感耦合等离子发射光谱法仪(ICP-AES)和电感耦合等离子体质谱仪(ICP-MS)测定大气降尘中铅、镉、铬、锌、锰、镍、铜和铊等8种重金属元素。测定结果表明： ICP-AES(铅、镉、铬、锌、锰、镍、铜)和ICP-MS(铊)两种方法的曲线线性好,准确度高,测定范围宽,检出限在0.024mg/kg-0.548mg/kg之间,精密度在0.15%-2.38%之间,能准确测定大气降尘中的重金属元素含量。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.