Low surface area carbonized silica obtained by the pyrolysis of dichloromethane: A column packing for adsorption and exclusion chromatography

Carbonized silica has been used as column packing for HPLC. Up to now it has been obtained by the pyrolysis of the vapour of benzene as well as aliphatic and aromatic alcohols. This paper reports on the properties of carbonized silica obtained by the pyrolysis of dichloromethane and used as column packing in HPLC.     

Spin-trapped Radicals: Determination by LC-TSP-MS and LC-ESI-MS

The 4-POBN[α-(4-pyridyl-l-oxide)-N-tert-butyl-nitrone] radical adducts of ethyl and pentyl radicals were determined by a combination of high performance liquid chromatography (HPLC) combined with electron paramagnetic resonance (EPR) with HPLC-electrospray (ESI)-mass spectrometry and HPLC-thermospray (TSP)-MS. The identifIcation of the peak corresponding to the spin-trapped radical was done by performing HPLC-EPR under the same chromatographic conditions as the HPLC-MS. The radical adducts could be determined by both techniques, even though for ESI only 12 μL/min of the total 1 mL/min HPLC flow rate could be directed into the ion source.     

Development of novel sol–gel coatings by chemically bonded ionic liquids for stir bar sorptive extraction—application for the determination of NSAIDS in real samples

In this work, a novel ionic liquid (IL) chemically bonded sol–gel coating was prepared for stir bar sorptive extraction (SBSE) of nonsteroidal anti-inflammatory drugs (NSAIDs) followed by high-performance liquid chromatography-ultraviolet detection (HPLC-UV). By using γ-(methacryloxypropyl)trimethoxysilane (KH-570) as a bridging agent, 1-allylimidazolium tetrafluoroborate ([AIM][BF₄]) was chemically bonded onto the bare stir bar, and the prepared IL-bonded sol–gel stir bar coating showed higher extraction efficiency and better adsorption/desorption kinetics for target NSAIDs over other polydimethylsiloxane (PDMS)-based or monolithic stir bar coatings. The mechanical strength and durability (chemical/thermal stability) of the prepared IL-bonded sol–gel coating were excellent. The influencing factors of SBSE, such as sample pH, salt effect, stirring rate, extraction time, desorption solvent, and desorption time, were optimized, and the analytical performance of the developed SBSE-HPLC-UV method was evaluated under the optimized conditions. The limits of detection (LODs) of the proposed method for three NSAIDs were in the range of 0.23–0.31 μg L^?1, and the enrichment factors (EFs) were in the range of 51.6–56.3 (theoretical enrichment factor was 100). The reproducibility was also investigated at concentrations of 5, 20, and 100 μg L^?1, and the relative standard deviations (RSDs) were found to be less than 9.5, 7.5, and 7.6 %, respectively. The proposed method was successfully applied for the determination of NSAIDs in environmental water, urine, and milk samples. Graphical Abstract

?     

Facile formation of stimuli-responsive,fluorescent and magnetic nanoparticles based on cellulose stearoyl ester via nanoprecipitation

In comparison to stimuli-responsive, multi-functional nanoparticles (NPs) from synthetic polymers, such NPs based on sustainable, naturally occurring polysaccharides are still scarce. In the present study, stable stimuli-responsive, fluorescent and magnetic NPs were fabricated using cellulose stearoyl esters (CSEs) consisting of cellulose and stearoyl groups. The multifunctional NPs with the average diameters between 80 and 250 nm were obtained after facile nanoprecipitation using CSE solutions containing Fe₃O₄-NPs. Using the aqueous solution of fluorescent rhodamine B as precipitant, NPs with rhodamine B on NP surface were obtained. Rhodamine B could be released depending on the temperature. In comparison, stearoylaminoethyl rhodamine B can be encapsulated in CSE-NPs, which renders obtained NPs reversible fluorescence in response to UV illumination and heat treatment.     

Rapid and Sensitive LC–MS/MS Analysis of Fatty Acids in Clinical Samples

Free fatty acids (FFAs), major cellular metabolites, play an important role during tumor pathogenesis. Enhanced de novo fatty acid synthesis in tissues is a characteristic feature of cancer. Therefore, measurement of FFA concentration in biological samples is beneficial for cancer research and clinical diagnosis. Herein, a rapid, stable, and sensitive detection methodology was established to simultaneously quantify 22 FFAs using high-performance liquid chromatography/electrospray ionization tandem mass spectrometry (HPLC/ESI–MS/MS). The HPLC–MS/MS system was run in negative ion mode for 15 min using multiple reaction monitoring. The lipids were extracted from colon tissues of colon cancer patients and then injected into the HPLC–MS/MS system for analysis. Colon samples were analyzed by inter-day repeatability and intra-day repeatability, with less than 5 % deviation for most fatty acids. This approach is successful to determine low picogram concentrations of each FFA molecule using milligrams of tissue, and provides a promising method for FFA microanalysis in clinical samples.     

Routine quality control of11C-labelled radiopharmaceuticals by high pressure liquid chromatography

Radio high pressure liquid chromatography (radio-HPLC) is the method of choice for quality control of radiopharmaceuticals labelled with short lived isotopes. Our preparations of “no carrier added”¹¹C-labelled palmitic acid and L-methionine are both designed to end with a HPLC separation on either silica gel or C-18 reversed phase material. Since the crude reaction mixtures contain milligram amounts of inactive substrate materials, both separations must be carried out at preparative scale. Nevertheless they are performed in less than 10 min. The most critical factor for the separation of¹¹C-palmitic acid from the main by-product pentadecane is the solvent composition: while the¹¹C-L-methionine separation is especially sensitive to pH variations.     

Impact of PS/SiO2 morphologies on the SERS activity of PS/SiO2/Ag nanocomposite particles

To understand the relationship between the morphology of carboxyl-functionalized polystyrene/silica (PS/SiO₂) nanocomposite microspheres and the surface-enhanced Raman scattering (SERS) performance of PS/SiO₂/Ag nanocomposite particles, core-shell and raspberry-like PS/SiO₂ composite microspheres were used as templates to prepare PS/SiO₂/Ag nanocomposite particles. The core-shell and raspberry-like structured PS/SiO₂ templates were prepared via in situ sol-gel reaction by hydrolysis tetraethyl orthosilicate (TEOS) in alkali solution. Silver nanoparticles (10–50 nm) were loaded on the PS/SiO₂ templates’ surface by chemical reduction. The morphology and structure of the PS/SiO₂/Ag particles were characterized by TEM, SEM, X-ray diffraction (XRD), and ultraviolet-visible (UV-vis) spectroscopy. Rhodamine 6G (R6G) was selected as a model chemical to study the enhancement performance of substrate constructed by PS/SiO₂/Ag nanocomposite. Results indicated that the PS/SiO₂/Ag nanocomposite prepared based on the core-shell templates showed higher SERS activity. The beneficial effect was associated with a lower specific area of core-shell structure and the larger average diameter of nanosilvers than that of the raspberry-like templates.     

A polyaniline-magnetite nanocomposite as an anion exchange sorbent for solid-phase extraction of chromium(VI) ions

This work describes a novel polyaniline-magnetite nanocomposite and its application to the preconcentration of Cr(VI) anions. The material was obtained by oxidative polymerization of aniline in the presence of magnetite nanoparticles. The parameters affecting preconcentration were optimized by a Box-Behnken design through response surface methodology. Extraction time, amount of magnetic sorbent and pH value were selected as the main factors affecting sorption. The sorption capacity of the sorbent for Cr(VI) is 54 mg g^?1. The type, volume and concentration of the eluents, and the elution time were selected as main factors in the optimization study of the elution step. Following sorption and elution, the Cr(VI) ions were reacted with diphenylcarbazide, and the resulting dye was quantified by HPLC with optical detection at 546 nm. The limit of detection is 0.1 μg L^?1, and all the relative standard deviations are <6.3 %. The nanocomposite was successfully applied to the rapid extraction and determination of trace quantities of Cr(VI) ions in spiked water samples. Figure

A schematic procedure of magnetic solid phase extraction     

Investigation of enhanced ion abundances from a carrier process in high-performance liquid chromatography particle beam mass spectrometry

Enhancements in ion abundances in high-performance liquid chromatography (HPLC) particle beam (PB) mass spectrometry were observed during coelution or when certain substances (e.g., ammonium acetate) were added to the mobile phase during a reverse-phase gradient elution HPLC separation. These enhancements were observed with two commercial PB interfaces and a variety of compounds generally not amenable to separation by gas chromatography. The enhancements are attributed to both improved chromatographic efficiency and a PB carrier process.     

Heat of reaction and curing of epoxy resin

The heat of reaction and kinetics of curing of diglycidyl ether of bisphenol-A (DGEBA) type of epoxy resin with catalytic amounts of ethylmethylimidazole (EMI) have been studied by differential power-compensated calorimetry as a part of the program for the study of process monitoring for composite materials. The results were compared with those from 1∶1 and 1∶2 molar mixtures of DGEBA and EMI. A method of determination of heat of reaction from dynamic thermoanalytical instruments was given according to basic thermodynamic principles. The complicated mechanism, possibly involving initial ionic formation, has also been observed in other measurements, such as by time-domain dielectric spectroscopy. The behavior of commercially available DGEBA resin versus purified monomeric DGEBA were compared. The melting point of purified monomeric DGEBA crystals is 41.4 °C with a heat of fusion of 81 J/g. The melt of DGEBA is difficult to crystallize upon cooling. The glass transition of purified DGEBA monomer occurs around ?22 °C with aΔC _p of 0.60 J/K/g.     

Specific activity determination and stability studies of therapeutic 131I-mIBG radiopharmaceutical

Board of Radiation and Isotope Technology, India is a manufacturer and supplier of therapeutic doses of the ¹³¹I-meta-iodobenzylguanidine to various nuclear medicine centers in India. The therapeutic dosage of radiopharmaceutical involves a single variable dose of >3.7 GBq activity. Since the radiopharmaceutical produced is mainly by isotope exchange, which yields a low specific activity product, the determination of its accurate mass is a critical parameter for its safe administration in patients. In view of this, a suitable high performance liquid chromatography (HPLC) method has been developed for the determination of specific activity with high precision. Also, quantification of stability in terms of the % radiochemical purity of the formulation >370 MBq/mL supplied, under different storage conditions over time was carried out using the developed HPLC method.     

Structural and thermal properties of HDPE/n-AlN polymer nanocomposites

High-density polyethylene (HDPE) containing various volume fractions (0–20 vol%) of aluminum nitride nanoparticles (n-AlN) is prepared by melt mixing. Structural and morphological characterizations of the prepared composites are carried out by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and atomic force microscopy (AFM). Thermal stability and degradation kinetics of HDPE/AlN (nano) composites are investigated by Thermogravimetric analysis (TG). HR-TEM micrographs confirm fairly uniform dispersion of AlN nanoparticles, as well as the existence of long interconnected chain-like aggregates. AFM images also confirm homogeneous dispersion of n-AlN in the polymer matrix. Roughness analysis from the AFM data indicates the presence of substantial undulation from the mean surface level. Thermogravimetric data indicate small improvement in the thermal stability of the composites. Kinetic parameters, viz., the activation energy (E _a), frequency factor (A), and reaction order (n) are estimated using the isoconversional methods of Kissinger, Flynn–Wall–Ozawa (FWO), KAS, and Friedman. Activation energies (E _a) calculated by the above four models display nearly similar features and are enhanced by the presence of AlN nanoparticles. Kinetics of degradation of HDPE-AlN (nano) composites follows a first-order reaction.     

An easy and effective method for radiolabelling of solid lipid nanoparticles

Nanoparticle biodistribution study is of great importance in bringing nanomedicine to patients. In this article, solid lipid nanoparticle (SLN) with dimension less than 100 nm was successfully radiolabelled with ^99mTc by using sodium borohydride as a reducing agent (instead of stannous salts). Paclitaxel (PTX) was used as a model anticancer drug for the preparation of drug loaded SLN (PSLN). PSLN was characterized by standard methods. Encapsulation efficiency for PTX in PSLN was estimated by HPLC. PTX (Taxol formulation) and PSLN were radiolabelled separately and subsequent characterizations of these complexes were performed. Greater than 95 % radiolabelling efficiency was achieved and the labelling efficiency was calculated to be more than 90 % upto 24 h. Both the above-mentioned complexes passed the in vitro stability tests. PSLN achieved more brain concentration than Taxol as determined by biodistribution studies. This type of radiolabelling technique can be useful in preclinical evaluation of drug loaded SLN.     

Thermal decomposition of polymethylmethacrylate synthesized with anionic catalysts

TG and DTA data are used to show that the thermal decomposition of polymethylmethacrylate (PMMA) synthesized with anionic catalysts depends on the nature of the catalyst. It is found that the thermal stability of PMMA obtained by using anionic amide catalysts is higher than that of radical PMMA and of PMMA obtained with other anionic catalysts, and depends on the temperature of polymerization and on the molecular weight of the polymer.     

Migration study of zinc dibutyldithiocarbamate in eye drops solutions

The potential deleterious effects of extractables/leachables in pharmaceutical products and the need to preserve product safety throughout its shelf life have led the three major pharmacopoeias (USP, EP, JP) to require extractable and toxicity testing of container/closure systems. To that, a HPLC/UV method was developed and validated for the detection of zinc dibutyl dithiocarbamate (ZDBC) as potential extractable from pharmaceutical container closure system of eye drops solutions. The method consists of direct extraction of the analyte with chloroform; the lower layer was evaporated to dryness and further reconstituted with acetonitrile. The chromatographic separation was performed on a Nova-Pak C18 column using as mobile phase a mixture of acetonitrile:water. Calibration curves were linear and relative standard deviation was sufficient. Detection limit of ZDBC was found to be 0.015 μg/mL. The HPLC method was further applied in seven currently marketed eye drops solutions, confirming its applicability for monitoring dithiocarbamates migration from container closure systems into the eye drops solutions.     

SDS 800 — The new data system for quantitative depth profiling of inhomogeneous samples by SIMS

More than 13 years of SIMS application field experience of numerous users of the ATOMIKA Ionmicroprobes have been the basis for the new SIMS Data System SDS 800. The hardware and software concept of the SDS 800, therefore, pays special attention to the following requirements:

1. Convenient set-up, modification and re-use of the measuring parameter sets for easy, time-saving operation.
2. Individual parameter selection from the very broad range of SIMS measuring parameters for optimum SIMS data quality.
3. Multitasking operation for simultaneous handling of SIMS measurement, data processing, data output and of auxiliary techniques.
4. Simultaneous depth profile/ion image acquisition and processing to enhance data quality and to validate data interpretation.
5. User-friendly data processing and output.

     

On synthesis of Fe2SiO4/SiO2 and Fe2O3/SiO2 composites through sol–gel and solid-state reactions

Major processing factors in forming Fe₂SiO₄/SiO₂ and Fe₂O₃/SiO₂ powders via sol–gel synthesis followed by solid-state reactions are investigated. The results clearly indicate that the chemical compositions of the precursors, the ratio of the precursors, the nature of the catalyst used, and the gas atmosphere during solid-state reactions can all affect the outcome of the reaction product(s). The formation of Fe₂SiO₄/SiO₂ is enhanced by using the precursor iron(III) acetylacetonate as the Fe source with the precursor ratio of iron(III) acetylacetonate to tetraethyl orthosilicate being 1:1 and the addition of formic acid. Otherwise, crystalline Fe and Fe₃C are formed in place of Fe₂SiO₄. By altering the gas atmosphere during solid-state reactions from argon to oxygen, the reaction products change from Fe₂SiO₄/SiO₂ to Fe₂O₃/SiO₂. All of the observed phenomena can be rationalized via the degree of mixing of the Fe–O and Si–O domains at the molecular level in the gel network during sol–gel reactions and the presence of a reducing or oxidizing atmosphere during the solid-state reaction.     

Polyoxotungstate nanoclusters supported on silica as an efficient solid-phase microextraction fiber of polycyclic aromatic hydrocarbons

A highly porous silica-supported tungstophosphoric acid (PW) nanocluster was prepared for use in solid-phase microextraction (SPME) of polycyclic aromatic hydrocarbons (PAHs). The PWs represent a class of discrete transition metal-oxide nanoclusters and their structures resemble discrete fragments of metal-oxide structures of definite size and shape. Transition metal-oxide nanoclusters display large structural diversity, and their monodisperse sizes can be tuned from several Ångstroms up to 10 nm. The highly porous silica-supported tungstophosphoric acid nanocluster material is found to be capable of efficiently extracting PAHs from aqueous sample solutions. The nanomaterial was immobilized on a stainless steel wire for fabrication of the SPME fiber. Following thermal desorption, the PAHs were quantified by GC-MS. Analytical merits include limits of detection that range from 0.02 to 0.1 pg mL^?1 and a dynamic range as wide as from 0.001 to 100 ng mL^?1. Under optimum conditions, the repeatability for one fiber (n?=?3), expressed as the relative standard deviation, is between 4.3 % and 8.6 %. The method is simple, rapid, and inexpensive. The thermal stability of the fiber and the high relative recovery make this method superior to conventional methods of extraction.

The highly porous silica-supported tungstophosphoric acid nanocluster material is found to be capable of efficiently extracting PAHs from aqueous sample solutions. The prepared nanomaterial was immobilized onto a stainless steel wire for fabrication of the SPME fiber. Following thermal desorption, the PAHs were quantified by GC-MS.     

The role of octanol in the extraction of hydrochloric acid by trilaurylamine dissolved in benzene

The extraction of hydrochloric acid by trilaurylamine (TLA) dissolved in benzene was studied in the presence and in absence of n-octanol. The extraction of HCl was found to be enhanced by the addition of octanoi to the organic phase. In order to explain this effect by means of the law of mass action, the systems TLA-HCL-benzene and n-octanol-HCl-benzene as well as TLA-octanol-benzene were also studied. It was found that TLA reacts with octanol to form a complex, TLAROH, while the octanol itself associates in benzene to form dimers and tetramers, although it does not extract HCl alone from the dilute solutions used in the present study. The enhancement of the extraction of HCl by TLA upon the addition of n-octanol could be described by the formation of the species TLA·ROH·HCl and its stability constant was determined.