Skeletal Rearrangement of Twisted Thia‐Norhexaphyrin: Multiply Annulated Polypyrrolic Aromatic Macrocycles

A hybrid thia‐norhexaphyrin comprising a directly linked N‐confused pyrrole and thiophene unit ( 1 ) revealed unique macrocycle transformations to afford multiply inner‐annulated aromatic macrocycles. Oxidation with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone triggered a cleavage of the C?S bond of the thiophene unit, accompanied with skeletal rearrangement to afford unique π‐conjugated products: a thiopyrrolo‐pentaphyrin embedded with a pyrrolo[1,2]isothiazole ( 2 ), a sulfur‐free pentaphyrin incorporating an indolizine moiety ( 3 ), and a thiopyranyltriphyrinoid containing a 2H‐thiopyran unit ( 4 ). Furthermore, 2 underwent desulfurization reactions to afford a fused pentaphyrin containing a pyrrolizine moiety ( 5 ) under mild conditions. Using expanded porphyrin scaffolds, oxidative thiophene cleavage and desulfurization of the hitherto unknown N‐confused core‐modified macrocycles would be a practical approach for developing unique polypyrrolic aromatic macrocycles.     

Synthesis and Complexation of Phosphorus- and Selenium-Containing Macrocycles

A facile synthesis method for SePSe-containing macrocycles was developed. The macrocycles were obtained by one-pot reaction. The powder selenium was reduced by potassium borohydride in absolute alcohol to produce potassium diselenide,which reacted with bis(o-bromomethylphenyl)phenylphosphine oxide 1 to give the intermediate, 1-phenyl-2,3:8,9-dibenzo-5,6-diselena-1-phosphacyclononadiene 1-oxide 2, and its oligomer. Without isolation, the mixture was treated with potassium borohydride and sodium hydroxide to produce diselenide anion, then allowed to react with alkyl dibromide to give SePSe-containing macrocycles (shown as Scheme 1). A medium-sized eight-membered heterocycle, l-phenyl-2,3:7,8-dibenzo-5-selena-1-phosphacyclooctadiene 1-oxide 4 was obtained surprisingly. The formation of heterocycle 4 was due to the presence of potassium selenide when selenium was reduced by potassium borohydride. The attempts to isolate the intermediate 2 were totally unsuccessful. When the alkyl dibromide was the 1,2-dibromoethane, the expected macrocycle was not obtained, with deposition of red selenium and extrusion of ethylene. The similar case was reported by Pinto B. M. in 1989.     

Neutral metallomacrocycles with four or ten (PEt3)Pd(II) centers

The reaction of [(Et(3)P)PdCl(2)](2) with 2,3-dihydroxypyridine, 5-chloro-2,3,-dihydroxypyridine, or 2-hydroxynicotinic acid in the presence of base gives neutral, metallomacrocyclic compounds in which the heterocycles act as dianionic, bridging ligands. The macrocycles contain four or ten palladium atoms as evidenced by single crystal X-ray analyses.     

Synthesis and guest recognition ability of 2,3-dimethoxy-1,4-phenylene-containing porphyrinoids

The acid-catalyzed condensation of the bispyrrolylbenzene derivative and benzaldehyde yielded macrocycles 1 and 2 bearing three and four dipyrrin units which are connected by 2,3-dimethoxy-1,4-phenylene rings. The cationic guest recognition ability of 1 was investigated by UV-vis absorption, (1)H NMR spectroscopic techniques, and ab initio calculations (HF/3-21G(*)). The tris-dipyrrin macrocycle 1 was found to recognize alkali metals in the O6 binding cavity.     

Chiral polymers containing a carbohydrate moiety: synthesis

This paper reports the preparation of poly(acetal-ethers) by two alternative synthetic pathways (alkaline and acid-catalyzed conditions). Polycondensations of methyl 2,3:4,6-di-O-salicylidene-alpha-D-mannopyranoside (3) (mixtures of endo-H and exo-H dioxolan-2-yl-diastereomers) with 1,4-dibromobutane (4) (method I a and I b) were performed in solvents (DMF, butyl acetate/DMF, DMSO) and were catalyzed by K2CO3/KI or KOH. A similar polymer (6) was formed by the reaction of methyl alpha-D-mannopyranoside (1) and 1,4-bis(2-formylphenoxy)butane (7), catalyzed by p-toluenesulfonic acid (method II). Regardless of conversion or initial comonomer feed ratios, the composition of the polycondensates depended on the reaction conditions, leading to the formation of macrocyclic [1 + 1] (5) and [2 + 2] compounds, which were macromolecules with diverse molecular weights and optical properties. The regioselective polycondensation was examined by 1H NMR spectroscopy of selected polymers. In the case of 5-membered cyclic acetal units, mixtures of the endo-H and exo-H dioxolan-2-yl system, diastereomers were formed in the polymer chain. The macrocycles and linear oligomers were identified by NMR and electrospray mass spectrometry (ESI-MS). Thermodynamically controlled reactions for making macrocycles as well as oligomers in the absence of templates are also discussed.     

Cyclic oligomers (macroaldonolactones) from a protected d-galactonic acid monomer

Dicyclohexylcarbodiimide-promoted self-condensation of 2,3:4,5-di-O-isopropylidene-d-galactonic acid (3) led to the macrocyclic oligomeric cyclo[(2,3:4,5-di-O-isopropylidene-(1→6)-d-galactonate)₂] (4) and cyclo[(2,3:4,5-di-O-isopropylidene-(1→6)-d-galactonate)₃] (5), having, respectively, 14- and 21-membered rings. The macrocycles 4 and 5 were also synthesized by cyclization of the respective linear dimer 11 and trimer 14 ω-hydroxy acids precursors prepared by stepwise additions of 3. Compounds 4 and 5 are biomaterials that may be described as macrolactone-cyclodextrins.     

Metal-free and dicopper(II) complexes of Schiff base [2 + 2] macrocycles derived from 2,2'-iminobisbenzaldehyde: syntheses, structures, and electrochemistry

Three new bis-terdentate Schiff base [2 + 2] macrocycles (H(2)L(Et), H(2)L(Pr), and H(2)L(Bu)) have been prepared in high yields by 1:1 condensation of 2,2'-iminobisbenzaldehyde with 1,2-diaminoethane, 1,3-diaminopropane, and 1,4-diaminobutane, respectively. Metalation of these macrocycles yields the corresponding dicopper(II) acetate (1, 2, and 3) and tetrafluoroborate (4, 5, and 6) complexes. The structures of H(2)L(Et), H(2)L(Pr), H(2)L(Bu), [Cu(II)(2)L(i)(OAc)(2)]·solvents (where i is Et, Pr or Bu) and [Cu(II)(2)L(Pr)(DMF)(4)] (BF(4))(2)·0.5H(2)O are reported. Intramolecular hydrogen bonding is a feature of the metal-free macrocycles. The copper(II) centers in [Cu(II)(2)L(i)(OAc)(2)]·solvents are four coordinate, and the macrocycles have U-shaped (Et, Bu) or stepped (Pr) conformations. Complex 5 crystallizes with two dimethylformamide (DMF) molecules bound per five coordinate copper(II) center. Electrochemical studies revealed ligand based oxidations for all of the macrocycles and complexes. Complexes 1 and 2 undergo two quasi-reversible oxidations in DCM which are associated with the deposition of a visible film on the electrode after multiple scans in this oxidative region, suggestive of electropolymerization. Complexes 4-6, studied in MeCN, have Cu(II) → Cu(I) redox potentials at more positive potentials than for 1-3.     

Transition metal-mediated intramolecular [2+2+2] cycloisomerizations of cyclic triynes and enediynes

[reaction: see text] Nitrogen-containing 15-membered triacetylenic macrocycles known as 1,6,11-tris(arylsulfonyl)-1,6,11-triazacyclopentadeca-3,8,13-triynes (1) and enediynic macrocycles called 1,6,11-tris(arylsulfonyl)-1,6,11-triazacyclopentadeca-3-ene-8,13-diynes (4 and 5) were satisfactorily prepared. [2+2+2] cycloisomerization processes catalyzed by transition metals were tested in the above-mentioned macrocycles. Readily available and familiar cyclotrimerization precatalysts were examined for efficiency. Among them, the RhCl(CO)(PPh(3))(2) complex was found to catalyze the cycloisomerization reaction giving the desired cycloadducts in high yields.     

Selenoether macrocyclic chemistry--syntheses and properties of new potentially tridentate and hexadentate Se/O-donor macrocycles

Treatment of O(CH2CH2SeCN)2 with Na in NH3(l), followed by dropwise addition of a thf solution of o-C6H4(CH2Br)2 at -40 degrees C leads to formation of three mixed Se/O-donor macrocycles which are separable by column chromatography, the [1 + 1] species L1, the [2 + 2] ring L2 and the [3 + 3] ring L3, of which L2 is by far the major species. Using the same starting materials, but in a high dilution cyclisation at room temperature with NaBH4 in thf/EtOH gives exclusively the [1 + 1] ring, L1. The saturated ring Se/O-donor macrocycles, L4 and L5 are obtained by simultaneous dropwise addition of solutions of O(CH2CH2SeCN)2 and Br(CH2)3Br to NaBH4 suspended in thf/EtOH. The small tridentate Se2O-donor ring, L4, is again the dominant product under these conditions (71%), although the more flexible precursors in this reaction also give rise to the larger Se4O2-donor ring, L5, as a by-product in 8% yield. These compounds are readily separated and purified by column chromatography (ethyl acetate:hexane, 1:19). The new macrocycles have been characterised by 1H, (13)C{1H} and (77)Se{1H} NMR spectroscopy and mass spectrometry, together with crystal structures of L1 and L2. Complexes of L1 and L2 with late transition metals (Pd(II), Pt(II), Cu(I) and Ag(I)) are also described.     

Missing-link macrocycles: hybrid heterocalixarene analogues formed from several different building blocks

The synthesis and structural characterization of hybrid heterocalix[4]arene analogues containing pyrrole, benzene, methoxy-substituted benzene, and pyridine subunits is described. Macrocycles 1 and 2, examples of calix[2]benzene[2]pyrrole and calix[1]benzene[3]pyrrole systems, respectively, are synthesized by the condensation of pyrrole and an appropriate phenylbis(carbinol). Macrocycles 3 and 7, examples of calix[2]benzene[1]pyridine[1]pyrrole and calix[1]pyridine[3]pyrrole, respectively, are synthesized by the use of a carbene-based pyrrole-to-pyridine ring-expansion procedure. Single-crystal X-ray analysis reveals that compounds 1a, 1b, and 2b adopt 1,3-alternate conformations in the solid state, whereas compounds 3 and 7 display structures that are best described as "flattened partial cones" in terms of their conformation. (Series a refers to pure benzene-derived systems, whereas series b indicates macrocycles containing 5-methoxyphenyl subunits). In the solid state, the methoxy-functionalized macrocycles 1b and 2b, and the chloropyridine-containing macrocycle 7 exist as dimers. In the case of 1a and 7, these compounds interact with neutral solvent in the solid state. The conformations of the macrocycles in solution were explored by temperature-dependent proton NMR and NOESY spectral analysis. At 188 K, macrocycles 1a and 2a adopt flattened 1,3-alternate conformations, whereas macrocycles 3 and 7 exist in the form of flattened partial-cone conformations. Standard proton NMR titration analyses were carried out in the case of macrocycles 1a and 2a, and reveal that at least the second of these systems is capable of binding fluoride and chloride anions in CD(2)Cl(2) solution at room temperature (K(a)=571 and 17M(-1) in the case of 2a and F(-) and Cl(-), respectively).     

Synthesis,X-ray crystal structure,UV/visible linear and nonlinear (optical limiting) spectral properties of symmetrical and unsymmetrical porphyrazines with annulated 1,2,5-thiadiazole and 1,4-diamyloxybenzene moieties

Co-cyclization of 1,2,5-thiadiazole-3,4-dicarbonitrile and 3,6-diamyloxyphthalodinitrile in the presence of magnesium or lithium amylate in amyl alcohol leads to mixtures containing the Mg derivatives of the symmetrical species tetrakis(1,2,5-thiadiazolo)porphyrazine, (S(4))PzH(2), and tetrakis(1,4-diamyloxybenzo)porphyrazine, (A(4))PzH(2), and the low-symmetry macrocycles bearing peripheral 1,2,5-thiadiazole and 1,4-diamyloxybenzene rings in the ratio 1:3, 2:2 (cis and trans), and 3:1, that is, (SA(3))PzH(2), (S(2)A(2))PzH(2), (SASA)PzH(2), and (S(3)A)PzH(2), respectively. The basic Mg materials were converted to the corresponding free-base macrocycles by treatment with CF(3)COOH. The species were separated from the mixtures by chromatography, either as Mg complexes or demetalated materials. With results on (S(4))PzH(2) and (SA(3))PzH(2) in hand, including crystallographic work on the latter, a general chemical physical investigation has been carried out of all the symmetrical and unsymmetrical free-base macrocycles. The structures of the species (S(2)A(2))PzH(2) and (A(4))PzH(2). were elucidated by single-crystal X-ray crystallography. The effect of the progressive variation of the macrocyclic structure along the series, from the symmetrical (S(4))PzH(2) to its symmetrical partner (A(4))PzH(2) via the low-symmetry 3:1, 2:2 (cis and trans), and 1:3 macrocycles, was studied by IR, (1)H NMR, and UV/Vis linear and nonlinear (optical limiting) measurements. The results are interpreted on the basis of intra- and intermolecular interactions between the electron-deficient 1,2,5-thiadiazole and the electron-donating 1,4-diamyloxybenzene moieties.     

二芳杂环基乙烯的合成及其光致变色反应研究

本文报道了2,3-双 (1,2-二甲基-3-吲哚基)-2-丁烯 (DF1),2,3-双 (1,4-二苯基-2-甲基-3-吡咯基)-2-丁烯 (DF2), 2,3-双(1-对甲苯基-4-苯基-2-甲基-3-吡咯基)-2-丁烯 (DF3), 2,3-双(1-对溴苯基-4-苯基-2-甲基-3-吡咯基)-2-丁烯 (DF4) 和2,3-双 (1-对甲氧苯基-5-苯基-2-甲基-3-吡咯基)-2-丁烯 (DF5) 的合成,以及它们的光致变色行为的研究。特别是DF1和DF5的光呈色和光消色过程进行了较为细致的研究。     

Operating molecular elevators

Inspired by the concept of multivalency in living systems, two mechanically interlocked molecules have been conceived that incorporate not once or twice but thrice the features of a pH-switchable [2]rotaxane with two orthogonal recognition sites for dibenzo[24]crown-8 (DB24C8), and 2,3-dinaphtho[24]crown-8 (DN24C8)-one a dialkylammonium ion (CH(2)NH(2)(+)CH(2)) and the other a bipyridinium dication (BIPY(2+)). Whereas at low pH, the CH(2)NH(2)(+)CH(2) sites bind the DB24C8/DN24C8 macrocycles preferentially, at high pH, deprotonation occurs with loss of hydrogen bonding and the macrocycles will move to the BIPY(2+) sites, where they can acquire some stabilizing [pi-pi] stacking interactions. Such mechanically interlocked molecules have been assembled from a trifurcated rig-like component wherein the dumbbell-like components of three [2]rotaxanes have one of their ends fused onto alternate positions (1,3,5) around a benzenoid core. The rig is mechanically interlocked by a platform based on a tritopic receptor, wherein either three benzo[24]crown-8 or three 2,3-naphtho[24]crown-8 macrocycles are fused onto a hexaoxatriphenylene core. The synthesis of these molecular elevators involves 1:1 complexation, followed by stoppering, i.e., feet are added to the rig. (1)H NMR spectroscopy and cyclic voltammetry, aided and abetted by absorption spectroscopy, have been employed to unravel the details of the mechanism by which the rig and platform components move on the alternate addition of base and acid. For each molecular elevator, the platform operates by taking three distinct steps associated with each of the three deprotonation/reprotonation processes. Thus, molecular elevators are more reminiscent of a legged animal than they are of passengers on freight elevators.     

Synthesis and structural characterization of carborane-containing neutral, self-assembled Pt-metallacycles

[structure: see text] We have combined carborane chemistry with the newly developed directional bonding strategy to synthesize neutral macrocycles. The m- and p-carborane dicarboxylates were utilized as the donor linkers in conjunction with 1,8-bis[trans-Pt(PEt3)2NO3]anthracene 3, 2,9-bis[trans-Pt(PEt3)2NO3]phenanthrene 5, and cis-Pt(PEt3)2(NO3)2 unit 6. Three new platinum-based macrocycles, 4, 7, and 8, were thus synthesized. 31P{1H} NMR as well as the X-ray characterization of Pt-metallacycles reveal the formation of single highly symmetrical neutral species.     

含吡啶-2,6-二酰亚胺单元的大环化合物合成及性质

在硫酸催化作用下,用前体二醛1[1,3-二(2'-甲酰苯氧基)丙烷]和前体二胺2[N,N'-(2-胺基苯基)-2,6-二甲酰亚胺吡啶]合成了[1+1]席夫碱大环化合物3,进一步还原得到饱和大环4。 用¹H NMR、IR、元素分析和质谱等技术手段对大环3和4的组成进行了表征。 采用X射线衍射仪测定了大环3 和4的晶体结构。 用UV-Vis光谱仪对大环3和4与系列阴离子的作用分别进行了考察,结果表明,饱和大环4仅对F^-有明显的选择性作用,并测定了该配位反应的配位比和平衡常数,进一步考察了大环3和4对甲醇的吸附性能。     

Tren centered tris-macrocycles as polytopic ligands for Cu(II) and Ni(II)

Two novel symmetric polytopic ligands L(1) and L(2) have been synthesized. They are composed of three 1,4,8,11-tetraazacyclotetradecane macrocycles which are connected to a central tren moiety via an ethylene and a trimethylene bridge, respectively. The complexation potential and the speciation diagrams of L(1) and L(2) towards Cu(2+) and Ni(2+) were determined by spectrophotometric and potentiometric titrations. Insight into the geometry of the Cu(2+) complexes is provided by UV-VIS and EPR spectroscopy. The simplified ligands L(3) and L(4) are utilized as references for an aminoethyl- and a tren-substituted tetraaza macrocycle to help assign the EPR spectra of the polytopic ligands L(1) and L(2). At a metal-to-ligand ratio of 3 : 1, the metal cations are preferentially bound to the tetraaza macrocycles of L(1) and L(2) in a square planar geometry. At high pH values, a nitrogen atom of the tren moiety in L(1) serves as an additional ligand in an axial position leading to a square pyramidal coordination around Cu(2+), whereas in L(2) no such geometry change is observed. At a metal-to-ligand ratio of 4 : 1, the additional metal cation resides in the central tren moiety of L(1) and L(2). However, in contrast to the typical trigonal bipyramidal geometry found in the [Cutren](2+) complex, the fourth Cu(2+) has a square pyramidal coordination caused by the interaction with the Cu(2+) cations in the macrocycles (as evidenced by EPR spectra). Since the sequence of metal complexation is such that the first three metal ions always bind to the three macrocycles of L(1) and L(2) and the fourth to the tren unit, it is possible to prepare heteronuclear complexes such as [Cu(3)NiL](8+) or [Ni(3)CuL](8+), which can be unambiguously identified by their spectral properties.     

Inter- and intramolecular Mitsunobu reaction and metal complexation study: synthesis of S-amino acids derived chiral 1,2,3,4-tetrahydroquinoxaline, benzo-annulated [9]-N3 peraza, [12]-N4 peraza-macrocycles

Substituted 1,2,3,4-tetrahydroquinoxaline, benzo-annulated unsymmetrical chiral [9]-N(3) peraza, and [12]-N(4) peraza-macrocycles have been synthesized employing an inter- and intramolecular Mitsunobu reaction from an amino acid derived common synthetic intermediate 3. The metal complexation study of these macrocycles has been investigated by UV-visible spectroscopic technique with binding constant (K(b)) value 1.84 × 10(3) dm(3) mol(-1) using the Benesi-Hildebrand equation and a Gibbs free energy (ΔG) -19.4 kJ mol(-1) at 35 °C for 14d with Co(2+). The binding properties of the metal were dependent on the structure of polyaza-macrocycles that were confirmed by the DFT optimized structure of two macrocycles. A detailed investigaton of UV-visible spectra of macrocycles and their complete interpretation with the help of TD-DFT along with the frontier molecular orbital calculations are presented.     

Synthesis of macrocycles incorporating azo‐bis(azofurazan) framework

A series of macrocycles containing four furazan rings bonded by three azo bonds 2, 5 and 7 have been synthesized from the common precursor, 3‐amino‐3′‐nitro(azofurazan) 3 . The macrocycles closure is a result of N?N bond formation at oxidative cyclization of corresponding bis(3‐aminofurazan‐4‐yl) precursors. X‐Ray crystal structures of macrocycles 2, 2 ?AcOH, 11 and 13 are reported.     

Binuclear ruthenium macrocycles formed via the weak-link approach

The "weak-link approach" for the synthesis of metallomacrocycles has been used to synthesize a series of novel Ru(II) macrocycles in high yield. RuCl2(PPh3)3 has been reacted with two different phosphino-alkyl-ether hemilabile ligands, 1,4-(PPh2(CH2)2O)2C6H4 and 1,4-(PPh2(CH2)2OCH2)2C6H4. The hemilabile bidentate ligand coordinates to Ru(II) centers through both the P and O atoms to form bimetallic "condensed intermediates". The weak Ru-O bonds have been selectively cleaved with CO, 1,2-diaminopropane, and pyridine to yield large open macrocycles. This is the first example of the weak-link approach employed to synthesize macrocycles with Ru, and metal centers in general that have more than four coordination sites.     

Hydrogen-bonded aryl amide macrocycles: synthesis, single-crystal structures, and stacking interactions with fullerenes and coronene

Six hydrogen-bonded shape-persistent aryl amide macrocycles have been prepared by using one-step and (for some) step-by-step approaches. From the one-step reactions, 3 + 3, 2 + 2, or even 1 + 1 macrocycles were obtained in modest to good yields. The reaction selectivity was highly dependent on the structures of the precursors. The X-ray structural analysis of two methoxyl-bearing macrocycles revealed intramolecular hydrogen bonding and weak intermolecular stacking interaction; no column-styled stacking structures were observed. The 1H (DOSY) NMR, UV-vis, and fluorescent experiments indicated that the new rigidified macrocycles complex fullerenes or coronene in chloroform through intermolecular pi-stacking interaction. The association constants of the corresponding 1:1 complexes have been determined if the stacking was able to cause important fluorescent quenching of the macrocycles or coronene.