Influence of the chelate ligand structure on the amide methanolysis reactivity of mononuclear zinc complexes

Zinc complexes of three new amide-appended ligands have been prepared and isolated. These complexes, [(dpppa)Zn](ClO4)2 (4(ClO4)2; dpppa = N-((N,N-diethylamino)ethyl)-N-((6-pivaloylamido-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine), [(bdppa)Zn](ClO4)2 (6(ClO4)2; bdppa = N,N-bis((N,N-diethylamino)ethyl)-N-((6-pivaloylamido-2-pyridyl)methyl)amine), and [(epppa)Zn](ClO4)2 (8(ClO4)2; epppa = N-((2-ethylthio)ethyl)-N-((6-pivaloylamido-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine), have been characterized by X-ray crystallography (4(ClO4)2 and 8(ClO4)2), 1H and 13C NMR, IR, and elemental analysis. Treatment of 4(ClO4)2 or 8(ClO4)2 with 1 equiv of Me4NOH.5H2O in methanol-acetonitrile (5:3) results in amide methanolysis, as determined by the recovery of primary amine-appended forms of the chelate ligand following removal of the zinc ion. These reactions proceed via the initial formation of a deprotonated amide intermediate ([(dpppa-)Zn]ClO4 (5) and [(epppa-)Zn]ClO4 (9)) which in each case has been isolated and characterized (1H and 13C NMR, IR, elemental analysis). Treatment of 6(ClO4)2 with Me4NOH.5H2O in methanol-acetonitrile results in the formation of a deprotonated amide complex, [(bdppa-)Zn]ClO4 (7), which was isolated and characterized. This complex does not undergo amide methanolysis after prolonged heating in a methanol-acetonitrile mixture. Kinetic studies and construction of Eyring plots for the amide methanolysis reactions of 4(ClO4)2 and 8(ClO4)2 yielded thermodynamic parameters that provide a rationale for the relative rates of the amide methanolysis reactions. Overall, we propose that the mechanistic pathway for these amide methanolysis reactions involves reaction of the deprotonated amide complex with methanol to produce a zinc methoxide species, the reactivity of which depends, at least in part, on the steric hindrance imparted by the supporting chelate ligand. Amide methanolysis involving a zinc complex supported by a N2S2 donor chelate ligand (3(ClO4)2) is more complicated, as in addition to the formation of a deprotonated amide intermediate free chelate ligand is present in the reaction mixture.     

Influence of ligand structure on the stability and oxidation of copper nanoparticles

The stability and oxidation of copper nanoparticles stabilized with various ligands have been studied. Lauric acid-capped copper nanoparticles were prepared by a modified Brust-Schiffrin method. Then, ligand exchange with an excess of different capping agents was performed. Oxidation and stability were studied by UV-vis, XRD, and TEM. Alkanethiols and oleic acid were found to improve air stability. The oxidation resistance of thiol-capped copper nanoparticles was found to increase with the chain length of the thiol. However, excess thiol caused etching of the particles under nitrogen. With oleic acid no etching was observed under nitrogen. After oxidation, no traces of the ligand-exchanged particles were found, suggesting their dissolution due to excess ligand. Oleic acid protected the particles against oxidation better than the tested thiols at large excess (ligand-copper ratio 20:1).     

New chelate ring opening reactions leading to the synthesis of novel mixed ligand complexes of the octahedral metal carbonyls

Reactions of the four-membered ring chelate CH₃N(PF₂)₂Cr(CO)₄ with trivalent phosphorous ligands (L) at 80°C leads to facile opening of the chelate ring to give the mixed ligand complexes trans-CH₃N(PF₂)₂Cr(CO)₄L (L=C₆H₅)₃P or monodentate C₆H₅N(PF₂)₂) containing a monodentate CH₃N(PF₂)₂ ligand.     

Conformational equilibria in 7-membered ring metal chelate complexes

Bis(diphosphine)metal and (diphosphine)(diene)metal (M = Rh, Ir) cationic complexes containing 7-membered chelate rings have been studied by low temperature ³¹P and ¹H NMR spectroscopy. For cyclooctadiene-1,4-bis(diphenylphosphino)butane- and -DIOP-rhodium, and cyclooctadiene-1,4-bis(diphenylphosphino)butane-iridium complexes, boat and chair conformations may be distinguished at low temperature. ¹H NMR spectra of these and analogous complexes suggest that both boat and chair conformers are significantly populated at room temperature. Bis(diphosphine) complexes of rhodium and iridium show very complex dynamic behaviour.     

Physicochemical properties and catalytic activity of metal tetraphenyl porphins in the oxidation of alkylaromatic hydrocarbons

We consider the effect of complexing metal in a tetraphenylporphin molecule on its catalytic activity in oxidizing alkylaromatic hydrocarbons by molecular oxygen. The catalytic activity of metal porphyrins (Co, Cu, Zn, Mn, and In TPP) is found to depend on their oxidation potentials and the distribution of electron density in the molecule. The electron-donating compound imidazole is shown to affect the oxidation rate.     

Influence of chelate ring size on the properties of phosphine-sulfonate palladium catalysts

Phosphine-sulfonate based palladium is one of the most extensively studied catalyst systems in olefin polymerization.This type of catalyst features six-membered chelate ring size,and can enable the copolymerizations of ethylene with a wide variety of polar monomers.In this contribution,we decide to investigate the influence of chelate ring size on the properties of phosphinesulfonate palladium catalysts.As such,a series of phosphine-sulfonate ligands and the corresponding seven-membered ring Pd(II)complexes[κ~2-(P,O)-2-(CH_2-PR_1R_2)-4-methylphenyl-sulfonato]Pd(Me)(DMSO)(Pd1,R_1=R_2=Cy,Pd2,R_1=R_2=o-Me O-C_6H_4;Pd3,R_1=Ph,R_2=2-[2,6-(Me O)_2C_6H_3]C_6H_4;DMSO=dimethyl sulfoxide)were designed,prepared and characterized.These palladium complexes are moderately active when they were applied in ethylene polymerization and copolymerizations with methyl acrylate and butyl vinyl ether.However,their properties are greatly reduced from those of the classic six-membered ring phosphine-sulfonate palladium complex Pd2′.The experimental results indicate that the bigger chelate ring size can increase the ligand flexibility and damage the catalytic properties for the phosphine-sulfonate type palladium catalysts.     

Effect of the central metal ion on the inhibiting properties of metal dithiocarbamates in oxidation processes

The dependence of inhibiting properties of M(dtc) on M for the complexes of M(II) and n M(III) has been studied. Inhibition is due to the interaction of M(dtc)_n with RO₂.

---

M(dtc)_n M M(II) M(III). M(dtc)_n RO₂.

     

Influence of ligand structure and molecular geometry on the properties of d polypyridinic transition metal complexes

Different strategies to improve the excited state properties of polypyridinic complexes by varying ligand structure and molecular geometry are described. Bidentate and tetradentate ligands based on fragments as dipyrido[3,2-a:2′,3′-c]phenazine, dppz, and pyrazino[2,3-f][1,10]-phenanthroline, ppl, have been used. Quinonic residues were fused to these basic units to improve acceptor properties. Photophysical studies were performed in order to test theoretical predictions.     

Influence of chelate ring interactions on copper(II) chelate stability studied by connectivity index functions

Linear models for estimation of the first (K1), second (K2), and overall stability constant (beta2) based on the valence connectivity index of the third order ((3)chi(v)) were developed and checked on four sets of copper(II) chelates (with diamines, N-alkylated glycines, and naturally occurring amino acids, including their mixed complexes). Univariate models were valid when log K1 and log K2 values were linearly correlated, i.e., when there was no interaction between chelate rings. The univariate models proved applicable for estimation of all three stability constants of complexes with diamines and N-alkylated glycines, but for complexes with amino acids additional terms were needed (bivariate models). Models reproduced stability constants with an error usually less than 0.3 log K units.     

Vinyl polymerization of norbornene with nickel catalysts bearing [N,N] six-membered chelate ring: Important influence of ligand structure on activity

Norbornene polymerizations with nickel complexes bearing [N,N] six-membered chelate ring activated with methylaluminoxane were investigated. The influence of ligand structure such as β-diimine, β-diketiminate, fluorinated β-diketiminate, and anilido-imine ligand on catalytic activities for norbornene polymerization was evaluated in detail. Ligands led to different electrophilicity of the nickel metal center, and a relatively positive nickel metal center would result in high catalytic activities for norbornene polymerization. The influences of polymerization temperature and Al/Ni ratio on norbornene polymerization with nickel catalysts bearing β-diimine, β-diketiminate, and fluorinated β-diketiminate ligands were also examined. All of the obtained polymers catalyzed by these nickel catalysts bearing [N,N] ligand are vinylic addition polynorbornenes with different molecular weights.     

Molecular structure of an areneolefindicarbonyl-chromium chelate complex with (2,5-dimethylbenzyl)-allyl ether as the chelate ligand

(2,5-Dimethylbenzyl)allyl ether produces two diastereomeric pairs of enantiomers with _η⁸ coordination of the Cr(CO)₂ group; the structure of the principal enantiomeric pair is established by complete X-ray analysis.     

Synthesis and structure of nickel and copper chelate complexes with coumarin azo ligand

1. Download high-res image (128KB)
2. Download full-size image

     

Noble metal loaded zeolites for the catalytic oxidation of chlorinated hydrocarbons

Summary A series of metal loaded zeolite catalysts (Pd/H-ZSM-5, Pd/H-BETA, Pt/H-ZSM-5, and Pt/H-BETA) were investigated for their activity and selectivity during oxidation of different chlorinated hydrocarbons, namely dichloromethane and trichloroethylene, at constant gas space velocity (15,000 h^-1) and constant chlorohydrocarbon concentration (1,000 ppm in dry air). It was observed that the two noble metals played a major role in influencing the catalytic performance for complete oxidation of both chlorinated compounds. The acidic properties of the zeolite support in combination with increased oxygen activation owing to the noble metal were responsible for the high chlorocarbon destruction activity exhibited by this type of catalysts.