Direct synthesis and characterization of phenyl-functionalized SBA-15

Phenyl-functionalized SBA-15 materials (Ph-SBA-15) were directly synthesized by using tri-block copolymer Pluronic P123 as templating agent under acidic conditions. The samples were characterized by Fourier transform infrared (FT-IR) spectra, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), thermogravimetry analysis (TGA) and N₂ adsorption-desorption. The results show that the phenyl groups are covalently attached to the pore wall of SBA-15 after modification. The functionalized materials still preserve a desirable two-dimensional P6mm hexagonal structure and have large specific surface area and pore volume although the molar ratio of phenyltrimethoxysilane in total silica precursors is as high as 23.0%.     

Synthesis and characterization of MnWO4 nanoparticles encapsulated in mesoporous silica SBA-15 by fast microwave-assisted method

The MnWO₄ nanoparticles encapsulated in mesoporous silica (MnWO₄/SBA-15) was successfully synthesized by a fast microwave-assisted method. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), nitrogen absorption–desorption isotherm, and Fourier transform infrared spectroscopy (FTIR). Our results showed that the MnWO₄/SBA-15 nanocomposites have the ordered hexagonal meso-structure of SBA-15, indicating MnWO₄ nanoparticles were successfully distributed into the channels of SBA-15. The size of MnWO₄ nanoparticles in SBA-15 is significantly smaller than the size of MnWO₄ nanoparticles prepared without SBA-15, indicating that the MnWO₄/SBA15 nanocomposites would be very promising for improving photocatalytic activity of MnWO₄ nanoparticles.     

Ultrasound-assisted coating of polyester fiber with silver bromide nanoparticles

The growth of silver bromide nanoparticles on polyester fiber was achieved by sequential dipping steps in alternating bath of potassium bromide and silver nitrate under ultrasound irradiation. The effects of ultrasound irradiation, concentration and sequential dipping steps in growth of the AgBr nanoparticles have been studied. Particle sizes and morphology of nanoparticle are depending on power of ultrasound irradiation, sequential dipping steps and concentration. These systems depicted a decrease in the particles size accompanying an increase in the sonication power. Results suggest that an increasing of sequential dipping steps and concentration led to an increasing of particle size. The physicochemical properties of the nanoparticles were determined by powder X-ray diffraction (XRD) and scanning electron microscopy (SEM).     

Ultrasound-assisted coating of silk yarn with sphere-like Mn3O4 nanoparticles

The growth of sphere-like trimanganese tetraoxide (Mn₃O₄) nanoparticles on silk fiber was achieved by sequential dipping in an alternating bath of potassium hydroxide and manganese(II) nitrate under ultrasound irradiation. Some parameters such as the effect of pH, numerous sequential dipping and ultrasonic irradiation on growth of the nanoparticles have been studied. The samples were characterized with powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and wavelength dispersive X-ray (WDX).     

Formation of silver iodide nanoparticles on silk fiber by means of ultrasonic irradiation

The growth of silver iodide nanoparticles on silk fiber was achieved by sequential dipping in an alternating bath of potassium iodide and silver nitrate under ultrasound irradiation. Some parameters such as effect of pH, concentration and numerous sequential dipping in growth of the nanocrystal have been studied. The samples were characterized with powder X-ray diffraction (XRD), scanning electron microscopy (SEM), ICP, TGA and solid state UV–vis spectroscopy.     

Adsorption of octadecyltrichlorosilane on mesoporous SBA-15

Adsorption of octadecyltrichlorosilane (OTS) on mesoporous SBA-15 has been studied by using Brunauer-Emmett-Teller (BET) surface area analysis, scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and thermo-gravimetric analysis (TGA) techniques. BET surface area analysis shows decrease of surface area from 930 to 416 m²/g after OTS adsorption. SEM pictures show close attachment of SBA-15 particles. EDAX measurements show increase of carbon weight percentage and decrease of oxygen and silicon weight percentage. XPS results closely support EDAX analysis. FTIR spectra shows presence of methyl (-CH₃) and methylene (-CH₂) bands and oriented OTS monolayer on SBA-15. Thermo-gravimetric analysis shows that the OTS adsorbed on SBA-15 are stable up to a temperature of 230 °C and that the OTS monolayers decompose between 230 and 400 °C.     

有序介孔氧化硅SBA-15/纳米AgI复合材料制备及其物性研究

AgI复合材料因其在电化学器件上的潜在应用而受到越来越多的关注.本文介绍采用浸渍热扩散的方法制备有序介孔氧化硅SBA-15/纳米AgI复合材料,对复合材料进行了XRD、TEM、SEM及交流阻抗谱分析表征.结果发现两相复合后AgI的离子电导率提高了约2个量级、相变温度也有较大改变.我们用界面空间电荷区模型解释了离子电导率...     

Functionalized SBA-15 materials for bilirubin adsorption

To investigate the driving force for bilirubin adsorption on mesoporous materials, a comparative study was carried out between pure siliceous SBA-15 and three functionalized SBA-15 mesoporous materials: CH₃-SBA-15 (MS), NH₂-SBA-15 (AS), and CH₃/NH₂-SBA-15 (AMS) that were synthesized by one-pot method. The obtained materials exhibited large surface areas (553-810 m²/g) and pore size (6.6-7.1 nm) demonstrated by XRD and N₂-ad/desorption analysis. The SEM images showed that the materials had similar fiberlike morphology. The functionalization extent was calculated according to ²⁹Si MAS NMR spectra and it was close to the designed value (10%). The synthesized mesoporous materials were used as bilirubin adsorbents and showed higher bilirubin adsorption capacities than the commercial active carbon. The adsorption capacities of amine functionalized samples AMS and AS were larger than those of pure siliceous SBA-15 and MS, indicating that electrostatic interaction was the dominant driving force for bilirubin adsorption on mesoporous materials. Increasing the ionic strength of bilirubin solution by adding NaCl would decrease the bilirubin adsorption capacity of mesoporous material, which further demonstrated that the electrostatic interaction was the dominant driving force for bilirubin adsorption. In addition, the hydrophobic interaction provided by methyl groups could promote the bilirubin adsorption.     

In situ formation deposited ZnO nanoparticles on silk fabrics under ultrasound irradiation

Deposition of zinc(II) oxide (ZnO) nanoparticles on the surface of silk fabrics was prepared by sequential dipping steps in alternating bath of potassium hydroxide and zinc nitrate under ultrasound irradiation. This coating involves in situ generation and deposition of ZnO in a one step. The effects of ultrasound irradiation, concentration and sequential dipping steps on growth of the ZnO nanoparticles have been studied. Results show a decrease in the particles size as increasing power of ultrasound irradiation. Also, increasing of the concentration and sequential dipping steps increase particle size. The physicochemical properties of the nanoparticles were determined by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and wavelength dispersive X-ray (WDX).     

Properties of SBA-15 modified by iron nanoparticles as potential hydrogen adsorbents and sensors

SBA-15-Fe was synthesized via the incorporation of Fe⁰ nanoparticles (Fe(0)-Nps) in the mesoporous channels. Electron microscopy and X-ray diffraction showed that dispersion of fine iron NPs occurs mainly inside the channels of SBA-15, producing a slight structure compaction. This was accompanied by a significant improvement of both the affinity towards hydrogen and electrical conductivity, as supported by hydrogen adsorption tests and impedance measurements. CO₂ thermal programmed desorption measurements revealed an attenuation of the acid character of the solid surface. This was explained in terms of strong iron interaction with the lattice oxygen atoms that reduces the SiO–H bond polarity. The close vicinity of fine Fe(0)-Nps combined with the large pore size of SBA-15 appear to contribute to a synergistic improvement of the electrical conductivity. The results reported herein open new prospects for SBA-15 as potential adsorbents for hydrogen storage and carriers for hydrogen sensors. The use of iron in lieu of noble metals for designing such materials is a novelty, because such applications of iron-loaded silica have not been envisaged so far due to the high reactivity of iron towards air and water. The development of such technologies, if any, should address this issue.     

Ultrasound-promoted coating of silk yarn with different morphology of magnesium hydroxide nanostructures

The growth of magnesium hydroxide nanostructures on silk yarn was achieved by sequential dipping steps in alternating bath of magnesium nitrate and potassium hydroxide under ultrasound irradiation. The effects of ultrasound irradiation, concentration, pH and sequential dipping steps on growth of the Mg(OH)₂ nanostructures have been studied. Morphology of the nanostructures, depending on pH and with decreasing pH from 13 to 8, changed from nanoparticle to nanoneedle. Results show a decrease in the particles size as the concentration and sequential dipping steps increased. The physicochemical properties of the nanostructures were determined by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and wavelength dispersive X-ray (WDX).     

CO2 adsorption on branched polyethyleneimine-impregnated mesoporous silica SBA-15

Adsorption of pure CO₂ on SBA-15 impregnated with branched polyethyleneimine (PEI) has been studied. Materials were prepared by impregnating the pore surface of SBA-15 mesoporous silica with different amounts of branched PEI (10, 30, 50 and 70 wt%). Textural properties, elemental analysis and low angle XRD measurements of the prepared samples showed a progressive pore filling of SBA-15 as PEI loading was increased. Pure CO₂ adsorption isotherms on these modified SBA-15 materials were obtained at 45 °C, showing high adsorption efficiency for CO₂ removal at 1 bar. Chemisorption of CO₂ on amino sites of the modified SBA-15 seems to be the main adsorption mechanism. PEI content of impregnated SBA-15 influences the adsorption capacity of the material, being a relevant variable for CO₂ removal by adsorption. Temperature effect on adsorption was also studied in the range 25-75 °C, showing that temperature strongly influences CO₂ adsorption capacity. Adsorption capacity was also tested after regeneration of the PEI-impregnated SBA-15 materials. Our results show that these branched PEI-impregnated materials are very efficient even at low pressure and after several adsorption-regeneration cycles.     

Dense coating of surface mounted CuBTC Metal-Organic Framework nanostructures on silk fibers, prepared by layer-by-layer method under ultrasound irradiation with antibacterial activity

The growth of Cu₃(BTC)₂ (BTC = 1,3,5-benzenetricarboxylate), also known as CuBTC and HKUST-1, Metal-Organic Framework (MOF) nanostructures on silk fibers were achieved by layer-by-layer technique in alternating bath of Cu(OAc)₂·2H₂O and H₃BTC solutions under ultrasound irradiation. The effect of pH, reaction time, ultrasound irradiation and sequential dipping steps in growth of the CuBTC Metal-Organic Framework nanostructures has been studied. These systems depicted a decrease in the size accompanying a decrease in the sequential dipping steps. In addition, dense coating of silk fibers with CuBTC MOF results in decrease the emission intensity of silk fibers. The silk fibers containing CuBTC Metal-Organic Framework exhibited high antibacterial activity against Escherichia coli and Staphylococcus aureus. The samples were characterized with powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) spectra and scanning electron microscopy (SEM). XRD analyses indicated that the prepared CuBTC MOF nanostructures on silk fibers were crystalline.     

介孔二氧化硅基导电聚合物复合材料热导率的实验研究

本文首先制备并表征了介孔二氧化硅SBA-15、 填充导电聚合物的复合材料PANI/SBA-15和复合材料PPy/SBA-15, 并建立双流计实验台开展了材料压片情况下的热导率研究. 在测量得到复合材料热导率的基础上, 引入当量孔径, 结合测量孔径对 PANI/SBA-15和PPy/SBA-15复合材料热导率随填充量的变化进行了定性分析. 分析表明: PANI/SBA-15和PPy/SBA-15复合材料的热导率比基材SBA-15的热导率大得多; 在相同的测量孔径和当量孔径情况下, PANI/SBA-15复合材料的热导率比PPy/SBA-15复合材料的热导率大; 导电聚合物填充到复合材料孔道内和孔道外都有助于热导率的提高, 填充到孔道内比填充到孔道外对热导率提高的贡献更大.     

Nanosized iron and chromium oxides supported on mesoporous CeO2 and SBA-15 silica: Physicochemical and catalytic study

Mesoporous ceria and SBA-15 silica were modified with iron and chromium oxide nanoparticles and characterized by XRD, N₂-physisorption, FTIR, UV-vis, Moessbauer spectroscopy and TPR-TG in hydrogen. Their catalytic behaviour in methanol decomposition to CO and hydrogen was also studied. Stabilization of mono- and bi-chromate species, FeO_x patches or isolated iron ions as well as Fe₂O₃ and Cr₂O₃ nanoparticles in different ratio depending on the nature of the porous matrix was observed. The simultaneous presence of iron and chromium oxides lead to change in their dispersion, providing easier reducibility, higher catalytic activity and stability of the obtained materials in comparison with the corresponding mono-component ones. The “intimate contact” at the interface of both loaded metal oxide nanoparticles and the support was discussed with respect to explain the differences in the state of the active ingredient and its specific catalytic behaviour.     

Development of TREN dendrimers over mesoporous SBA-15 for CO2 adsorption

Mesoporous SBA-15 was synthesized using rice husk ash (RHA) as the silica source and their defective Si-OH groups were grafted with tris(2-aminoethyl) amine (TREN) dendrimers generation through step-wise growth technique. The X-ray diffraction (XRD) and nitrogen adsorption/desorption results of parent SBA-15 obtained from RHA, suggests its resemblance with SBA-15 synthesized using conventional silica sources. Furthermore, the nitrogen adsorption/desorption results of SBA-15/TREN dendrimer generations (G1-G3) illustrates the growth of dendrimer inside the mesopores of SBA-15 and their CO₂ adsorption capacity was determined at 25 °C. The maximum CO₂ adsorption capacity of 5-6 and 7-8 wt% over second and third dendrimer generation was observed which is discernibly higher than the reported melamine and PAMAM dendrimers. The experimental CO₂ adsorption capacity was found to be less than theoretically calculated CO₂ adsorption capacity due to inter and intra molecular amidation as result of steric hindrance during the dendrimer growth. These SBA-15/TREN dendrimer generations also exhibit thermal stability up to 350 °C and CO₂ adsorption capacity remains unaltered upon seven consecutive runs.     

Comparison of silver nanoparticles confined in nanoporous silica prepared by chemical synthesis and by ultra-short pulsed laser ablation in liquid

Hexagonally ordered mesoporous silica materials, MCM-41 and SBA-15, have been synthesized and loaded with Ag nanoparticles, utilizing both chemical synthesis and ultra-short pulsed laser ablation in liquid. In laser ablation, a silver target, immersed in aqueous suspension of ordered mesoporous silica SBA-15, was irradiated by ultra-short laser pulses to generate silver nanoparticles. For comparison, samples of similar silver contents were prepared either by incorporating silver into the SBA-15 during a hydrothermal synthesis or by introducing silver in MCM-41 by template ion-exchange. Samples were characterized by XRD, N₂ physisorption, TEM and UV–vis spectroscopy. All preparations contained significant amount of 5–50 nm size silver agglomerates on the outer surface of the silica particles. The laser ablation process did not cause significant destruction of the SBA-15 structure and metallic silver (Ag⁰) nanoparticles were mainly generated. It is demonstrated that by laser ablation in aqueous silica suspension smaller and more uniform metallic silver particles can be produced and loaded on the surface of the silica support than by synthesis procedures. Catalytic properties of the samples have been tested in the total oxidation of toluene. Because of its favorable Ag dispersity, the Ag/SBA-15 catalyst, generated by the laser ablation method, had better catalytic stability and, relative to its Ag load, higher activity than the conventional Ag/SBA-15 preparations.     

Ag-deposited silica-coated Fe3O4 magnetic nanoparticles catalyzed reduction of p-nitrophenol

In this paper, a novel approach was successfully developed for advanced catalyst Ag-deposited silica-coated Fe₃O₄ magnetic nanoparticles, which possess a silica coated magnetic core and growth active silver nanoparticles on the outer shell using n-butylamine as the reductant of AgNO₃ in ethanol. The as-synthesized nanoparticles have been characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDX), Fourier transform infrared spectra (FT-IR), vibration sample magnetometer (VSM), and have been exploited as a solid phase catalyst for the reduction of p-nitrophenol in the presence of NaBH₄ by UV-vis spectrophotometry. The obtained products exhibited monodisperse and bifunctional with high magnetization and excellent catalytic activity towards p-nitrophenol reduction. As a result, the as-obtained nanoparticles showed high performance in catalytic reduction of p-nitrophenol to p-aminophenol with conversion of 95% within 14 min in the presence of an excess amount of NaBH₄, convenient magnetic separability, as well as remained activity after recycled more than 6 times. The Fe₃O₄@SiO₂-Ag functional nanostructure could hold great promise for various catalytic reactions.     

Synthesis and characterization of Fe3O4@C@Ag nanocomposites and their antibacterial performance

We synthesized Fe₃O₄@C@Ag nanocomposites through a combination of solvothermal, hydrothermal, and chemical redox reactions. Characterization of the resulting samples by X-ray diffraction, Fourier-transform infrared spectroscopy, field-emission scanning and transmission electron microscopy, and magnetic measurement is reported. Compared to Fe₃O₄@Ag nanocomposites, the Fe₃O₄@C@Ag nanocomposites showed enhanced antibacterial activity. The Fe₃O₄@C@Ag nanocomposites were able to almost entirely prevent growth of Escherichia coli when the concentration of Ag nanoparticles was 10 μg/mL. Antibacterial activity of the Fe₃O₄@C@Ag nanocomposites was maintained for more than 40 h at 37 °C. The intermediate carbon layer not only protects magnetic core, but also improves the dispersion and antibacterial activity of the silver nanoparticles. The magnetic core can be used to control the specific location of the antibacterial agent (via external magnetic field) and to recycle the residual silver nanoparticles. The Fe₃O₄@C@Ag nanocomposites will have potential uses in many fields as catalysts, absorbents, and bifunctional magnetic-optical materials.     

Template occluded SBA-15: An effective dissolution enhancer for poorly water-soluble drug

The aim of the present work was to improve the dissolution rate of piroxicam by inclusion into template occluded SBA-15. Our strategy involves directly introducing piroxicam into as-prepared SBA-15 occluded with P123 (EO₂₀PO₇₀EO₂₀) by self assembling method in acetonitrile/methylene chloride mixture solution. Ultraviolet spectrometry experiment and thermogravimetric analysis-differential scanning calorimetry (TG-DSC) profiles show that the piroxicam and P123 contents in the inclusion compound are 12 wt% and 28 wt%, respectively. X-ray powder diffraction and DSC analysis reveal that the included piroxicam is arranged in amorphous form. N₂ adsorption-desorption experiment indicates that the piroxicam has been introduced to the mesopores instead of precipitating at the outside of the silica material. The inclusion compound was submitted to in vitro dissolution tests, the results show that the piroxicam dissolve from template occluded inclusion compound more rapidly, than these from the piroxicam crystalline and template removed samples in all tested conditions. Thus a facile method to improve the dissolution rate of poorly water-soluble drug was established, and this discovery opens a new avenue for the utilization of templates used for the synthesis of mesoporous materials.