On the dynamic instability of nanowire-fabricated electromechanical actuators in the Casimir regime: Coupled effects of surface energy and size dependency

Herein, the dynamic pull-in instability of cantilever nanoactuator fabricated from conductive cylindrical nanowire with circular cross-section is studied under the presence of Casimir force. The Gurtin–Murdoch surface elasticity in combination with the couple stress theory is employed to incorporate the coupled effects of surface energy and size phenomenon. Using Green–Lagrange strain, the higher order surface stress components are incorporated in the governing equation. The Dirichlet mode is considered and an asymptotic solution, based on the path integral approach, is applied to consider the effect of the Casimir attraction. Furthermore, the influence of structural damping is considered in the model. The nonlinear governing equation is solved using analytical reduced order method (ROM). The effects of various parameters on the dynamic pull-in parameters, phase planes and stability threshold of the actuator are demonstrated.     

Theoretical modeling of the Casimir force-induced instability in freestanding nanowires with circular cross-section

The Casimir force can induce instability and adhesion in freestanding nanostructures. Previous research efforts in this area have exclusively focused on modeling the instability in structures with planar or rectangular cross-section, while, to the best knowledge of the authors, no attention has been paid to investigate this phenomenon for nanowires with circular cross-section. In this study, effects of the Casimir force on the instability and adhesion of freestanding Cylinder–Plate and Cylinder–Cylinder geometries are investigated, which are commonly encountered in real nanodevices. To compute the Casimir force, two approaches, i.e. the proximity force approximation (PFA) for small separations and Dirichlet asymptotic approximation (scattering theory) for large separations, are considered. A continuum mechanics theory is employed, in conjunction with the Euler-beam model, to obtain constitutive equations of the systems. The governing nonlinear constitutive equations of the nanostructures are solved using two different approaches, i.e. the analytical modified Adomian decomposition (MAD) and the numerical finite difference method (FDM). The detachment length and minimum gap, both of which prevent the Casimir force-induced adhesion, are computed for both configurations.     

Influence of surface electronic structure on the Casimir force

Recent nonlocal microscopic theory of Casimir force which expresses the interaction energy between two metallic slabs in terms of surface polariton propagators calculated from diamagnetic and paramagnetic current-current response functions, sensitive to details of the surface electron density profiles and single-particle excitations on the surfaces, is used here to calculate various contributions to the Casimir energies for a silver film described by two different models. Current-current response functions are constructed from energy levels and wave functions obtained in two different models: jellium and Chulkov one-dimensional model potential, and the results are compared with the local plasmon model results. The results show how the details of such surface electronic structure modify Casimir force.     

An improved proximity force approximation for electrostatics

A quite straightforward approximation for the electrostatic interaction between two perfectly conducting surfaces suggests itself when the distance between them is much smaller than the characteristic lengths associated with their shapes. Indeed, in the so called “proximity force approximation” the electrostatic force is evaluated by first dividing each surface into a set of small flat patches, and then adding up the forces due two opposite pairs, the contributions of which are approximated as due to pairs of parallel planes. This approximation has been widely and successfully applied in different contexts, ranging from nuclear physics to Casimir effect calculations. We present here an improvement on this approximation, based on a derivative expansion for the electrostatic energy contained between the surfaces. The results obtained could be useful for discussing the geometric dependence of the electrostatic force, and also as a convenient benchmark for numerical analyses of the tip–sample electrostatic interaction in atomic force microscopes.     

Forces between conducting surfaces due to spatial variations of surface potential

We describe analytical and numerical methods for calculating forces between conductors due to variations of electrostatic surface potential across their surfaces. In the simple case where the spatial variation of surface potential gives rise to uniform power spectra, we show that the electrostatic force can be large in comparison with, and scale in approximately the same way with distance of closest approach as, the Casimir force. Patch potentials that are consistent with existing experimental data could give rise to forces with a magnitude of 4% of the Casimir force at separations of 0.1 microm.     

Surface plasmon modes and the Casimir energy

We show the influence of surface plasmons on the Casimir effect between two plane parallel metallic mirrors at arbitrary distances. Using the plasma model to describe the optical response of the metal, we express the Casimir energy as a sum of contributions associated with evanescent surface plasmon modes and propagative cavity modes. In contrast to naive expectations, the plasmonic mode contribution is essential at all distances in order to ensure the correct result for the Casimir energy. One of the two plasmonic modes gives rise to a repulsive contribution, balancing out the attractive contributions from propagating cavity modes, while both contributions taken separately are much larger than the actual value of the Casimir energy. This also suggests possibilities to tailor the sign of the Casimir force via surface plasmons.     

Experimental investigation of the Casimir force beyond the proximity-force approximation

The analysis of all Casimir force experiments using a sphere-plate geometry requires the use of the proximity-force approximation (PFA) to relate the Casimir force between a sphere and a flat plate to the Casimir energy between two parallel plates. Because it has been difficult to assess the PFA's range of applicability theoretically, we have conducted an experimental search for corrections to the PFA by measuring the Casimir force and force gradient between a gold-coated plate and five gold-coated spheres with different radii using a microelectromechanical torsion oscillator. For separations z<300 nm, we find that the magnitude of the fractional deviation from the PFA in the force gradient measurement is, at the 95% confidence level, less than 0.4z/R, where R is the radius of the sphere.     

On the role of interband surface plasmons in carbon nanotubes

We review the properties of collective surface excitations—excitons and interband plasmons—in single-walled and double-walled carbon nanotubes. We show that an electrostatic field applied perpendicular to the nanotube axis can control the exciton-plasmon coupling in individual small-diameter (≲nm) singlewalled nanotubes, both in the linear excitation regime and in the non-linear excitation regime with the photoinduced biexcitonic states formation. For double-walled carbon nanotubes, we report a profound effect of interband surface plasmons on the inter-tube Casimir force at tube separations similar to their equilibrium distances. Strong overlapping plasmon resonances from both tubes warrant their stronger attraction. Nanotube chiralities possessing such collective excitation features will result in forming the most favorable innerouter tube combination in double-walled carbon nanotubes. These findings pave the way for the development of new generation of tunable optoelectronic and nano-electromechanical device applications with carbon nanotubes.     

Chiral Anomaly-Enhanced Casimir Interaction between Weyl Semimetals

We theoretically study the Casimir interaction between Weyl semimetals.When the distance a between semiinfinite Weyl semimetals is in the micrometer regime,the Casimir attraction can be enhanced by the chiral anomaly.The Casimir attraction depends sensitively on the relative orientations between the separations(b_1,b_2)of Weyl nodes in the Brillouin zone and show anisotropic behavior for the relative orientation of these separations(b_1,b_2) when they orient parallel to the interface.This anisotropy is quite larger than that in conventional birefringent materials.The Casimir force can be repulsive in the micrometer regime if the Weyl semimetal slabs are sufficiently thin and the direction of Weyl nodes separations(b_1,b_2) is perpendicular to the interface.The Casimir attraction between Weyl semimetal slabs decays slower than 1/a4 when the Weyl nodes separations b_1 and b_2 are both parallel to the interface.     

Casimir force pressure on the insulating layer in metal-insulator-semiconductor structures

The Casimir force pressure on the insulating layer in metal-insulator-semiconductor structures with parameters close to those used in the production of semiconductor devices has been calculated. It has been shown that the Casimir force pressure increases tenfold and reaches several tens of pascals as the insulator thickness decreases from 80 to 40 nm. The metal layer thickness and the presence of the surface layer with a high charge carrier concentration in the semiconductor have a slight effect on calculated values of the Casimir pressure.     

基于悬滴法的纳米燃油表面张力测量与分析

以柴油为基液、溴化十六烷三甲基铵(Cetyltrimethyl Ammonium Bromide,CTAB)为助溶剂,通过两步法配制CNT(Carbon Nanotube),CeO2及Co3O4纳米燃油.采用悬滴法测量柴油与纳米燃油的表面张力,探究纳米物质种类、粒径、质量分数及温度对纳米燃油表面张力的影响.研究发现,在...     

Anomalous temperature dependence of the Casimir force for thin metal films

Within the framework of the Drude dispersive model, we predict an unusual nonmonotonic temperature dependence of the Casimir force for thin metal films. For certain conditions, this force decreases with temperature due to the decrease of the metallic conductivity, whereas the force increases at high temperatures due to the increase of the thermal radiation pressure. We consider the attraction of a film to: either (i) a bulk ideal metal with a planar boundary, or (ii) a bulk metal sphere (lens). The experimental observation of the predicted decreasing temperature dependence of the Casimir force can put an end to the long-standing discussion on the role of the electron relaxation in the Casimir effect.     

Experiment and theory in the Casimir effect

Casimir effect is the attractive force which acts between two plane parallel, closely spaced, uncharged, metallic plates in vacuum. This phenomenon was predicted theoretically in 1948 and reliably investigated experimentally only in recent years. In fact, the Casimir force is similar to the familiar van der Waals force in the case of relatively large separations when the relativistic effects come into play. We review the most important experiments on measuring the Casimir force by means of torsion pendulum, atomic force microscope and micromechanical torsional oscillator. Special attention is paid to the puzzle of the thermal Casimir force, i.e. to the apparent violation of the third law of thermodynamics when the Lifshitz theory of dispersion forces is applied to real metals. Thereafter we discuss the role of the Casimir force in nanosystems including the stiction phenomenon, actuators, and interaction of hydrogen atoms with carbon nanotubes. The applications of the Casimir effect for constraining predictions of extra-dimensional unification schemes and other physics beyond the standard model are also considered.     

Edge effects in electrostatic calibrations for the measurement of the Casimir force

We have performed numerical simulations to evaluate the effect on the capacitance of finite size boundaries realistically present in the parallel plane, sphere-plane, and cylinder-plane geometries. The potential impact of edge effects in assessing the accuracy of the parameters obtained in the electrostatic calibrations of Casimir force experiments is then discussed.     

Casimir Effect at Finite Temperature in the Presence of One Fractal Extra Compactified Dimension

We discuss the Casimir effect for massless scalar fields subject to the Dirichlet boundary conditions on the parallel plates at finite temperature in the presence of one fractal extra compactified dimension. We obtain the Casimir energy density with the help of the regularization of multiple zeta function with one arbitrary exponent and further the renormalized Casimir energy density involving the thermal corrections. It is found that when the temperature is sufficiently high, the sign of the Casimir energy remains negative no matter how great the scale dimension δ is within its allowed region. We derive and calculate the Casimir force between the parallel plates affected by the fractal additional compactified dimension and surrounding temperature. The stronger thermal influence leads the force to be stronger. The nature of the Casimir force keeps attractive.     

The role of the “Casimir force analogue” at the microscopic processes of crystallization and melting

Melting (crystallization), a phase transition from a crystalline solid to a liquid state, is a common phenomenon in nature. We suggest a new factor, “the Casimir force analogue”, to describe mechanisms of melting and crystallization. The Casimir force analogue is a force occurring between the surfaces of solid and liquid phases of metals caused by different energy density of phonons of these phases. It explains abrupt changes in geometry and thermodynamic parameters at a melting point. “The Casimir force analogue” helps to estimate latent melting heat and to gain an insight into a solid–liquid transition problem.     

Effect of the electric current on the Casimir force between graphene sheets

The dependence of the thermal component of the Casimir force and Casimir friction between graphene sheets on the drift velocity of charge carriers in one of the sheets has been analyzed. It has been shown that the drift motion results in the measurable change in the thermal Casimir force owing to the Doppler effect. The thermal Casimir force, as well as Casimir friction, increases strongly in the case of resonant photon tunneling, when the energy of an emitted photon coincides with the excitation energy of an electron-hole pair. In the case of resonant photon tunneling, the dominant contribution to the Casimir friction even at temperatures above room temperature comes from quantum friction caused by quantum fluctuations. Quantum friction can be detected in an experiment on the friction drag between graphene sheets in a high electric field.     

Casimir Force at a Finite Cut-Off

We calculate the Casimir force at a finite cut-off Λ by summing the forces induced by the all fluctuation modes. We show that the Casimir force is independent of the cut-off function in the limit LΛ → ∞. There is a correction in the order of (LΛ)^-2, when LΛ is finite and large. This correction becomes remarkable when L is comparable with the microscopic length scale Λ^-1. It has been demonstrated that the Casimir force at a finite cut-off should be defined by summing forces of all fluctuation modes, instead of the derivative of Casimir energy with respect to L where an additional derivative of the cut-off function has been introduced.     

Dependence of chaotic actuation dynamics of Casimir oscillators on optical properties and electrostatic effects

With Casimir and electrostatic forces playing a crucial role for the performance and stability of microelectromechanical systems (MEMS), the presence of chaotic behavior, which is often unavoidable, leads to device malfunction due to stiction. Therefore, we investigate here how the optical properties of different materials influence the chaotic behavior of electrostatic torsional MEMS due to changes in magnitude of the Casimir forces and torques. We consider the materials Au, which is a good conductor, AIST, which is a phase change material being close to metal in the crystalline state, and finally doped SiC as a very poor conductor. For the conservative systems, there is no chaotic behavior and the analysis of phase portraits and bifurcation diagrams reveal the strong sensitivity of stable actuation dynamics on the material optical properties, while applied electrostatic potentials lead faster to instability and stiction for higher conductivity materials. For the driven systems, the Melnikov method is used to study the chaotic behavior. The results from this method are supported by the study of the contours of the transient time to stiction in the phase plane, which reveal a substantially increased chaotic behavior for higher conductivity materials, associated with stronger Casimir torques and applied electrostatic potentials.     

The Casimir Effect for Parallel Plates in the Spacetime with a Fractal Extra Compactified Dimension

The Casimir effect for massless scalar fields satisfying Dirichlet boundary conditions on the parallel plates in the presence of one fractal extra compactified dimension is analyzed. We obtain the Casimir energy density by means of the regularization of multiple zeta function with one arbitrary exponent. We find a limit on the scale dimension like $\delta>\frac{1}{2}$ to keep the negative sign of the renormalized Casimir energy which is the difference between the regularized energy for two parallel plates and the one with no plates. We derive and calculate the Casimir force relating to the influence from the fractal additional compactified dimension between the parallel plates. The larger scale dimension leads to the greater revision on the original Casimir force. The two kinds of curves of Casimir force in the case of integer-numbered extra compactified dimension or fractal one are not superposition, which means that the Casimir force show whether the dimensionality of additional compactified space is integer or fraction.