基于静电喷射法活性多孔磁性炭球的制备及其对亚甲基蓝的吸附

在利用静电喷射一步法获得壳聚糖(CS)磁性微球(Fe₃O4/CS)的基础上,对Fe₃O4/CS进行高温炭化和碱活化处理获得活性磁性多孔炭球(A-Fe₃O4/C),并对A-Fe₃O4/C吸附水中亚甲基蓝(MB)分子的性能进行了研究。在利用扫描电子显微镜、红外吸收光谱仪、比表面分析仪对制备微球的形貌和结构进行分析的基础上,深入研究溶液pH、吸附时间、温度以及活化剂种类等因素对A-Fe₃O4/C吸附性能的影响。研究结果表明,A-Fe₃O4/C对MB的吸附量随着pH值的增加而增大,且经KOH活化后的A-Fe₃O4/C对MB表现出较优的吸附性能。A-Fe₃O4/C对MB的吸附过程符合伪二级动力学方程和Langmuir等温线模型,理论最大吸附容量可达300.6 mg·g^-1。此外,A-Fe₃O4/C表现出良好的重复利用性能,6次循环后对MB的去除率没有明显下降。     

基于静电喷射法活性多孔磁性炭球的制备及其对亚甲基蓝的吸附

在利用静电喷射一步法获得壳聚糖(CS)磁性微球(Fe₃O₄/CS)的基础上,对Fe₃O₄/CS进行高温炭化和碱活化处理获得活性磁性多孔炭球(A-Fe₃O₄/C),并对A-Fe₃O₄/C吸附水中亚甲基蓝(MB)分子的性能进行了研究。在利用扫描电子显微镜、红外吸收光谱仪、比表面分析仪对制备微球的形貌和结构进行分析的基础上,深入研究溶液pH、吸附时间、温度以及活化剂种类等因素对A-Fe₃O₄/C吸附性能的影响。研究结果表明,A-Fe₃O₄/C对MB的吸附量随着pH值的增加而增大,且经KOH活化后的A-Fe₃O₄/C对MB表现出较优的吸附性能。A-Fe₃O₄/C对MB的吸附过程符合伪二级动力学方程和Langmuir等温线模型,理论最大吸附容量可达300.6 mg·g^-1。此外,A-Fe₃O₄/C表现出良好的重复利用性能,6次循环后对MB的去除率没有明显下降。     

Preparation of a novel Fe3O4/graphene oxide hybrid for adsorptive removal of methylene blue from water

In this work, a novel Fe₃O₄/graphene oxide (GO) hybrid was prepared and its removal ability of cationic methylene blue dye from water was investigated. To improve the dispersability of Fe₃O₄/GO hybrid in water, GO was first modified by polyethylene glycol (PEG) via a click approach before deposition of Fe₃O₄ nanoparticles onto its surface. The successful modification of GO surface and the deposition of Fe₃O₄ nanoparticles were confirmed by transmission electron microscopy directly. The saturation magnetization of the resultant Fe₃O₄/GO hybrid is 7.8 eum/g. The adsorption capacities of Fe₃O₄/GO hybrid for methylene blue at 35 and 60°C were as high as 96.05 and 120.05 mg/g, respectively. Moreover, the Langmuir, Freundlich, and Temkin models are used to investigate the isothermal adsorption behavior of Fe₃O₄/GO hybrid.     

Adsorptive Removal of Cd,Cu, Ni and Mn from Environmental Samples Using Fe3O4-Zro2@APS Nanocomposite: Kinetic and Equilibrium Isotherm Studies

In this study, Fe₃O₄-ZrO₂ functionalized with 3-aminopropyltriethoxysilane (Fe₃O₄-ZrO₂@APS) nanocomposite was investigated as a nanoadsorbent for the removal of Cd(II), Cu(II), Mn (II) and Ni(II) ions from aqueous solution and real samples in batch mode systems. The prepared magnetic nanomaterials were characterized using X-ray powder diffraction (XRD), scanning electron microscopy/energy dispersion x-ray (SEM/EDX) Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). Factors (such as adsorbent dose and sample pH) affecting the adsorption behavior of the removal process were studied using the response surface methodology. Under optimized condition, equilibrium data obtained were fitted into the Langmuir and Freundlich isotherms and the data fitted well with Langmuir isotherms. Langmuir adsorption capacities (mg/g) were found to be 113, 111, 128, and 123 mg/g for Cd, Cu, Ni and Mn, respectively. In addition, the adsorption kinetics was analyzed using five kinetic models, pseudo-first order, pseudo-second order, intraparticle diffusion and Boyd models. The adsorbent was successfully applied for removal of Cd(II), Cu(II), Mn (II) and Ni(II) ions in wastewater samples.     

Fe3O4 Anisotropic Nanostructures in Hydrogels: Efficient Catalysts for the Rapid Removal of Organic Dyes from Wastewater

Fe₃O₄ anisotropic nanostructures that exhibit excellent catalytic performance are rarely used to catalyze Fenton‐like reactions because of the inevitable drawbacks resulting from traditional preparation methods. In this study, a facile, nontoxic, water‐based approach is developed for directly regulating a series of anisotropic morphologies of Fe₃O₄ nanostructures in a hydrogel matrix. In having the advantages of both the catalytic activity of Fe₃O₄ and the adsorptive capacity of an anionic polymer network, the hybrid nanocomposites have the capability to effect the rapid removal of cationic dyes, such as methylene blue, from water samples. Perhaps more interestingly, hybrid nanocomposites loaded with Fe₃O₄ nanorods exhibit the highest catalytic activity compared to those composed of nanoneedles and nanooctahedra, revealing the important role of nanostructure morphology. By means of scanning electrochemical microscopy, it is revealed that Fe₃O₄ nanorods can efficiently catalyze H₂O₂ decomposition and thus generate more free radicals (^.OH, ^.HO₂) for methylene blue degradation, which might account for their high catalytic activity.     

Removal of Phenol Dyes Using a Photocatalytic Reactor with SnO2/Fe3O4 Nanoparticles

In this study, we present kinetics of phenol dyes removal by SnO₂/Fe₃O₄ nanoparticles in a photocatalytic reactor for optimization of this process. The effect of different concentrations of SnO₂ 5, 10, 15, 20% w/w on the photocatalytic reactor during removal of phenol red was investigated. The SnO₂/Fe₃O₄ nanoparticles were synthesized by core–shell method. The results of XRD and TEM showed the successful synthesis of these nanoparticles. Several other methods were applied to synthesis of these nanoparticles but none of them succeeded. This process composed of two-stage. The first stage was absorption by iron oxide nanoparticles and second stage was photocatalytic by tin oxide nanoparticles that followed pseudo-second-order kinetic and first-order kinetic, respectively. Optimization of this process was done corresponding to the parameters affecting the process with design expert software. In order to determine the optimal values of each of the parameters and the optimal conditions of the process, parameters were introduced to response surface methodology.     

Synthesis of orientedly bioconjugated core/shell Fe3O4@Au magnetic nanoparticles for cell separation

Orientedly bioconjugated core/shell Fe₃O₄@Au magnetic nanoparticles were synthesized for cell separation. The Fe₃O₄@Au magnetic nanoparticles were synthesized by reducing HAuCl₄ on the surfaces of Fe₃O₄ nanoparticles, which were further characterized in detail by TEM, XRD and UV-vis spectra. Anti-CD3 monoclonal antibody was orientedly bioconjugated to the surface of Fe₃O₄@Au nanoparticles through affinity binding between the Fc portion of the antibody and protein A that covalently immobilized on the nanoparticles. The oriented immobilization method was performed to compare its efficiency for cell separation with the non-oriented one, in which the antibody was directly immobilized onto the carboxylated nanoparticle surface. Results showed that the orientedly bioconjugated Fe₃O₄@Au MNPs successfully pulled down CD3⁺ T cells from the whole splenocytes with high efficiency of up to 98.4%, showing a more effective cell-capture nanostructure than that obtained by non-oriented strategy. This developed strategy for the synthesis and oriented bioconjugation of Fe₃O₄@Au MNPs provides an efficient tool for cell separation, and may be further applied to various fields of bioanalytical chemistry for diagnosis, affinity extraction and biosensor.     

双功能化磁性纳米修复剂对多重金属的快速、高效钝化行为

采用“一锅法”制备了四氧化三铁/半胱氨酸（Fe₃O₄/Cys）磁性纳米微球,随后对Fe₃O₄/Cys进行亚氨基二乙酸（IDA）修饰得到Fe₃O₄/Cys/IDA磁性双功能化纳米微球。研究发现Fe₃O₄/Cys中的L-Cys是通过—SH基团接枝到Fe₃O₄表面的,随后IDA分子中的羧基与Fe₃O₄/Cys中的—NH₂形成酰胺键,最终形成多支链多羧基的Fe₃O₄/Cys/IDA磁性纳米修复剂。基于修复剂表面短支链-长支链交替的多羧基结构,实现了羧基基团的高密度接枝。同时,Fe₃O₄/Cys/IDA磁性纳米微球对Pb²⁺、Cd²⁺、Cu²⁺、Co²⁺、Ni²⁺、Zn²⁺为专性吸附,而对Hg²⁺属于非专性吸附,且吸附重金属后得到的钝化产物均表现了良好的稳定性。另外,Fe₃O₄/Cys/IDA对重金属离子的吸附符合Langmuir模型,属于单层均相吸附,其吸附过程符合准二级动力学模型,最大吸附量为49.05 mg·g^-1。     

一锅法制备S型异质结光催化剂Fe2O3/Fe2TiO5及其高效降解有机污染物性能

首次采用简单的一锅法制备了Fe₂O₃/Fe₂TiO₅异质结纳米材料。构建S型异质结后,与纯的Fe₂O₃和Fe₂TiO₅相比,Fe₂O₃/Fe₂TiO₅复合材料表现出更高的光催化降解速率和效率。经过2.5 h的光照后,Fe₂O₃/Fe₂TiO₅可以降解接近100%的亚甲基蓝（MB）。在Fe₂O₃/Fe₂TiO₅复合材料中,Fe₂O₃和Fe₂TiO₅之间形成了内建电场,可以促进光生电子-空穴对的分离。因此,具有更高能量的Fe₂TiO₅导带中的电子和具有更高能量的Fe₂O₃价带中的空穴可以得到有效的保留,从而使它们更加有效地扩散到催化剂表面,并参加降解反应。此外,Fe₂O₃/Fe₂TiO₅复合材料具有很好的光催化稳定性。     

Fe3O4@SiO2@TiO2-Co/rGO磁性光催化剂的合成及其光催化活性研究

采用溶胶-凝胶法和水热法（HTM）合成了Fe₃O₄@SiO₂@TiO₂-Co/rGO复合纳米粒子（磁性光催化剂）,通过X射线衍射、扫描电子显微镜及其能量分散光谱和UV-vis漫反射光谱对产物进行了表征分析.研究了Co掺杂量、溶液pH值、亚甲基蓝（MB）溶液初始浓度以及干扰离子（例如Cl^-、SO₄^2-、CO₃^2-）等因素对MB降解的影响,并对磁性光催化剂的可重复使用性进行了分析.正常实验条件下（pH=7,[MB]=10 mg/L,磁性光催化剂用量=0.1 g/50 mL）,150 min内MB最大去除率达到98.24%.干扰离子影响MB降解次序为CO₃^2- < Cl^- < SO₄^2-,磁性光催化剂重复使用7次MB光降解率仅下降7.07%,新型磁性光催化剂具有良好的MB降解性能和较高的重复使用性能.     

Removal of Cd(II) from Micro-Polluted Water by Magnetic Core-Shell Fe3O4@Prussian Blue

A novel core-shell magnetic Prussian blue-coated Fe₃O₄ composites (Fe₃O₄@PB) were designed and synthesized by in-situ replication and controlled etching of iron oxide (Fe₃O₄) to eliminate Cd (II) from micro-polluted water. The core-shell structure was confirmed by TEM, and the composites were characterized by XRD and FTIR. The pore diameter distribution from BET measurement revealed the micropore-dominated structure of Fe₃O₄@PB. The effects of adsorbents dosage, pH, and co-existing ions were investigated. Batch results revealed that the Cd (II) adsorption was very fast initially and reached equilibrium after 4 h. A pH of 6 was favorable for Cd (II) adsorption on Fe₃O₄@PB. The adsorption rate reached 98.78% at an initial Cd (II) concentration of 100 μg/L. The adsorption kinetics indicated that the pseudo-first-order and Elovich models could best describe the Cd (II) adsorption onto Fe₃O₄@PB, indicating that the sorption of Cd (II) ions on the binding sites of Fe₃O₄@PB was the main rate-limiting step of adsorption. The adsorption isotherm well fitted the Freundlich model with a maximum capacity of 9.25 mg·g⁻¹ of Cd (II). The adsorption of Cd (II) on the Fe₃O₄@PB was affected by co-existing ions, including Cu (II), Ni (II), and Zn (II), due to the competitive effect of the co-adsorption of Cd (II) with other co-existing ions.     

基于医用纱布负载的二氧化锰纳米颗粒用于亚甲蓝染料的去除

以医用纱布（medical gauze,MG）同时作为模板和还原剂,通过原位氧化还原反应,简便地制备了MG负载的MnO₂纳米颗粒（MnO₂ NPs/MG）,并对其形貌、成分进行表征。结果表明,MnO₂ NPs均匀地分散于MG纤维表面。结合MnO₂纳米材料的吸附性能和MG复合材料的操作便捷性,将MnO₂ NPs/MG进一步应用于亚甲蓝染料的去除。结果表明,在中性条件下,通过简单的浸泡搅拌,MnO₂ NPs/MG对亚甲蓝的去除率可达85.09%,并且可以通过增大吸附材料用量与染料初始浓度的比例提高去除率。等温吸附和动力学研究证明,MnO₂ NPs/MG对亚甲蓝的吸附符合Langmuir吸附等温模型和拟二级动力学模型。     

基于医用纱布负载的二氧化锰纳米颗粒用于亚甲蓝染料的去除

以医用纱布(medical gauze,MG)同时作为模板和还原剂,通过原位氧化还原反应,简便地制备了MG负载的MnO₂纳米颗粒(MnO₂ NPs/MG),并对其形貌、成分进行表征。结果表明,MnO₂ NPs均匀地分散于MG纤维表面。结合MnO₂纳米材料的吸附性能和MG复合材料的操作便捷性,将MnO₂ NPs/MG进一步应用于亚甲蓝染料的去除。结果表明,在中性条件下,通过简单的浸泡搅拌,MnO₂ NPs/MG对亚甲蓝的去除率可达85.09%,并且可以通过增大吸附材料用量与染料初始浓度的比例提高去除率。等温吸附和动力学研究证明,MnO₂ NPs/MG对亚甲蓝的吸附符合Langmuir吸附等温模型和拟二级动力学模型。     

静电自组装方法合成的具有多孔三维网络结构的Fe3O4/石墨烯复合材料作为高性能锂离子电池负极材料

采用静电自组装方法,分两步合成Fe（OH）₃/GO前驱体（GO：氧化石墨烯）,再通过水热反应和600 ℃高纯氮气气氛下煅烧,获得了Fe₃O₄/石墨烯复合材料. 通过X射线衍射（XRD）、扫描电镜（SEM）、高分辨透射电镜（HRTEM）、拉曼（Raman）光谱等多种分析,发现该复合材料具有三维多孔石墨烯网络结构. 把合成的这种Fe₃O₄/石墨烯复合材料作为锂离子电池负极材料,电化学测试结果表明其具有优良的电化学性能：首次放电容量为1390 mAh·g^-1,50次循环后容量为819 mAh·g^-1. 通过对比实验表明,三维石墨烯网络结构的形成对复合材料的电化学循环稳定性起着关键作用.     

Fe_2O_3/TiO_2纳米管阵列的制备及其光催化性能

在钛基体上采用阳极氧化法制备了TiO2纳米管阵列,采用化学浴方法在TiO2纳米管阵列上修饰了Fe2O3纳米颗粒。利用扫描电镜、X射线衍射和紫外可见漫反射光谱等手段对材料进行了表征,同时测试了材料的光电化学性能及其光催化降解亚甲基蓝染料废水的性能。结果表明,Fe2O3纳米颗粒的修饰将TiO2纳米管阵列的光响应拓宽至可见光区域,提高了光电流,Fe2O3/TiO2纳米管阵列的光电流是未修饰的TiO2纳米管阵列的9倍。而在光催化反应中,亚甲基蓝最高降解率可达80%,比未修饰的TiO2纳米管阵列高出30%。     

Fe2O3/TiO2纳米管阵列的制备及其光催化性能

在钛基体上采用阳极氧化法制备了TiO₂纳米管阵列,采用化学浴方法在TiO₂纳米管阵列上修饰了Fe₂O₃纳米颗粒.利用扫描电镜、X射线衍射和紫外可见漫反射光谱等手段对材料进行了表征,同时测试了材料的光电化学性能及其光催化降解亚甲基蓝染料废水的性能.结果表明,Fe₂O₃纳米颗粒的修饰将TiO₂纳米管阵列的光响应拓宽至可见光区域,提高了光电流,Fe₂O₃/TiO₂纳米管阵列的光电流是未修饰的TiO₂纳米管阵列的9倍.而在光催化反应中,亚甲基蓝最高降解率可达80%,比未修饰的TiO₂纳米管阵列高出30%.     

用于高效去除水中孔雀石绿的三层结构磁性复合材料Fe3O4@聚丙烯酸@ZiF-8的制备

设计并合成了一种以磁性纳米粒子为核,聚合物为中间层,金属有机骨架材料为外层的三层结构磁性复合材料(Fe₃O₄@PAA@ZIF-8)。首先利用溶剂热法制备Fe₃O₄纳米粒子,然后通过蒸馏沉淀聚合法在Fe₃O₄纳米粒子表面包覆聚丙烯酸(PAA)层,最后通过原位沉积法在PAA外部包覆ZIF-8。在对Fe₃O₄@PAA@ZIF-8的组成和结构进行表征的基础上,深入研究其对孔雀石绿(MG)的吸附性能。透射电子显微镜(TEM)显示Fe₃O₄@PAA@ZIF-8具有明显的三层结构,Fe₃O₄的平均粒径为117nm,PAA层厚度约为17 nm,ZIF-8层的厚度约为14 nm。Fe₃O₄@PAA@ZIF-8对MG的吸附量随着p H的升高而增大,吸附过程符合准二阶动力学模型和Langmuir等温吸附模...     

Characterization of Fe3O4 Nanoparticles for Applications in Catalytic Activity in the Adsorption/Degradation of Methylene Blue and Esterification

The aim of this study is to evaluate the applicability of the catalytic activity (CA) of the Fe₃O₄ magnetic system in the adsorption/degradation of methylene blue and esterification. The thermal decomposition method allowed the preparation of Fe₃O₄ nanoparticles. The crystallites of the Fe₃O₄ structural phase present an acicular form confirmed by X-ray diffraction. Transmission electron microscopy results identified the acicular shape and agglomeration of the nanoparticles. Mössbauer spectroscopy showed that the spectrum is composed of five components at room temperature, a hyperfine magnetic field distribution (HMFD), two sextets, a doublet, and a singlet. The presence of the HMFD means that a particle size distribution is present. Fluorescence spectroscopy studied the CA of the nanoparticles with methylene blue and found adsorption/degradation properties of the dye. The catalytic activity of the nanoparticles was evaluated in the esterification reaction by comparing the results in the presence and absence of catalyst for the reaction with isobutanol and octanol, where it is observed that the selectivity for the products MIBP and MNOP is favored in the first three hours of reaction.     

用于高效去除水中孔雀石绿的三层结构磁性复合材料Fe3O4@聚丙烯酸@ZiF-8的制备

设计并合成了一种以磁性纳米粒子为核，聚合物为中间层，金属有机骨架材料为外层的三层结构磁性复合材料(Fe₃O₄@PAA@ZIF 8)。首先利用溶剂热法制备Fe₃O₄纳米粒子，然后通过蒸馏沉淀聚合法在Fe₃O₄纳米粒子表面包覆聚丙烯酸(PAA)层，最后通过原位沉积法在PAA外部包覆ZIF 8。在对Fe₃O₄@PAA@ZIF 8的组成和结构进行表征的基础上，深入研究其对孔雀石绿(MG)的吸附性能。透射电子显微镜(TEM)显示 Fe₃O₄@PAA@ZIF 8 具有明显的三层结构，Fe₃O₄的平均粒径为 117nm，PAA 层厚度约为 17 nm，ZIF 8层的厚度约为 14 nm。Fe₃O₄@PAA@ZIF 8对 MG 的吸附量随着 pH 的升高而增大，吸附过程符合准二阶动力学模型和 Langmuir等温吸附模型。此外，Fe₃O₄@PAA@ZIF 8还表现出良好的重复利用性能，8次循环利用后对MG(500 mg·L^-1)的最大吸附量仍可达982 mg·g^-1。     

铌酸锰-还原氧化石墨烯复合光催化剂的构建以及可见光下降解亚甲基蓝

通过水热法和光还原方法成功地制备了铌酸锰-还原氧化石墨烯复合光催化剂。这种复合光催化剂可以明显地提高光催化降解亚甲基蓝的光催化活性,降解效率在60 min内达到了78.2%,是单体铌酸锰降解效率的2倍。通过活性物质捕获实验的研究,增强的光催化性能可以归因于还原氧化石墨烯加速了光生电子-空穴的分离效率,进而解决了低光催化活性的问题。