Studies of the heat of vaporization of water associated with cellulose fibers characterized by thermal analysis

The heat of vaporization (H _vap) of water associated with cellulose fibers versus moisture ratio was determined using modulated differential scanning calorimetry. A steep increase in the H _vap for decreasing moisture ratio was observed at low moisture ratios (0.0–0.3 g/g), indicating a higher energy required to evaporate water interacting with the cellulose. The water molecules with elevated H _vap correspond to non-freezing bound water. This may be attributed to (a) energy to break mono and/or multilayer sorption and (b) energy to overcome capillary forces. For polypropylene and glass fibers, H _vap was constant versus moisture ratio, in agreement with no non-freezing bound water existing in these systems. It is suggested that non-freezing bound water could be used as an indicator of H _vap, and vice versa, at low moisture ratios.     

Effect of the solvent on the thermodynamic parameters of conformational transformations: Pseudo effects of the medium

The vaporization enthalpies (ΔH _vap) of 97 primary, secondary, and tertiary alkylphosphines and alkyl(aryl)phosphines with different spatial structures were calculated using the Trouton and Wadso equations and the first-order topological solvation index¹χ^s. The contributions of the H₂P and HP groups and the phosphorus atom to the vaporization enthalpies of primary, secondary, and tertiary phosphines, respectively, were calculated. The results obtained can be used in calculations of ΔH _vap for related phosphorus compounds. For Part 16, see Ref. 1. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 32–37, January, 2000.     

Thermochemistry of heteroatomic compounds

The vaporization enthalpies (ΔH _vap) of 97 primary, secondary, and tertiary alkylphosphines and alkyl(aryl)phosphines with different spatial structures were calculated using the Trouton and Wadso equations and the first-order topological solvation index¹χ^s. The contributions of the H₂P and HP groups and the phosphorus atom to the vaporization enthalpies of primary, secondary, and tertiary phosphines, respectively, were calculated. The results obtained can be used in calculations of ΔH _vap for related phosphorus compounds. For Part 16, see Ref. 1. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 32–37, January, 2000.     

A thermal analysis study of Ibuprofen

Ibuprofen has been subjected to a TG/DTA study over the temperature range of 30 to 350°C in a flowing atmosphere of nitrogen. The heating rate and the flow rate were varied. The DTA shows a melting at around 80°C and boiling point range from 212 to 251°C depending upon the heating rate. The mass loss in the TG data confirms the evaporation of Ibuprofen between them.p. and the normalb.p. Evaporation is limited to the surface area, which is a constant in the crucible holding the sample. The DTG plot shows clearly a zero order process which is consistent with the process of evaporation. The enthalpy of vaporization (_vap H) calculated by Trouton's rule is found to be in the range of 42.7–46.1 kJ mol^–1. TheE _act for the zero order reaction is in the range of 81.8–87.0 kJ mol^–1 and is calculated by use of the derivative method. The value ofE _act is about twice that for H _vap in Ibuprofen and differs from other compounds, whereE _act H _vap . It is suggested that the Ibuprofen molecule is existing as a dimer in the liquid state and dissociates to a monomer in the vapor state.     

Determination of the Enthalpies of Vaporization of Cyclic Organic Peroxides by Correlation of Changes in Gas Chromatographic Retention Times

Liquid and solid cyclic peroxides derived from aliphatic ketones are explosive materials so their enthalpies of vaporization and other thermodynamic or condensed-phase properties cannot be measured directly. In this work the enthalpies of vaporization of peroxides at 298.15 K were estimated simply from gas chromatographic retention times measured at different temperatures. The technique correlates changes in the retention times of compounds whose enthalpies of vaporization are known (called the reference series), with those of the compounds of interest. If t _R′ is the adjusted retention time (retention time of each compound minus the retention time of unretained diethyl ether, used as solvent) a plot of ln t _R′ against 1/T for each compound (reference compounds and cyclic peroxides) results in a straight line (r ² > 0.99 for all compounds). The enthalpy of transfer from solution to the vapor state (Δ_sol^g H _m) can be obtained by multiplying the slope by the gas constant (R). A second plot correlates the enthalpies of transfer from solution to the vapor state (Δ_sol^g H _m), as measured by gas–liquid chromatography (GLC), with enthalpies of vaporization of reference materials (Δ_vap H _m at 298.15 K) available in the literature. C₉–C₁₅ fatty acid methyl esters and hydrocarbons were used as reference compounds. The enthalpies of vaporization of the cyclic organic peroxides were calculated from the equation of the line obtained in this second correlation, the slope of which was Δ_vap H _m (at 298.15 K)/Δ^g _sol H _m. The experiments were performed under isothermal conditions with a DB-5 capillary column, flame-ionization detection (FID), and nitrogen as carrier gas. The column temperature was varied over a range of at least 30–70 K between 403 and 473 K, with chromatograms being acquired at 10 K intervals. Enthalpies of vaporization of cyclic organic peroxides are not available in the literature, and the values given in this paper, obtained by gas chromatography, are the first to be reported.     

Aprotic Ionic Liquids: A Framework for Predicting Vaporization Thermodynamics

Ionic liquids (ILs) are recognized as an environmentally friendly alternative to replacing volatile molecular solvents. Knowledge of vaporization thermodynamics is crucial for practical applications. The vaporization thermodynamics of five ionic liquids containing a pyridinium cation and the [NTf₂] anion were studied using a quartz crystal microbalance. Vapor pressure-temperature dependences were used to derive the enthalpies of vaporization of these ionic liquids. Vaporization enthalpies of the pyridinium-based ionic liquids available in the literature were collected and uniformly adjusted to the reference temperature T = 298.15 K. The consistent sets of evaluated vaporization enthalpies were used to develop the “centerpiece”-based group-additivity method for predicting enthalpies of vaporization of ionic compounds. The general transferability of the contributions to the enthalpy of vaporization from the molecular liquids to the ionic liquids was established. A small, but not negligible correction term was supposed to reconcile the estimated results with the experiment. The corrected “centerpiece” approach was recommended to predict the vaporization enthalpies of ILs.     

Experimental Enthalpies of Formation and Strain of the Methylated 1-Amino-2-phenylethanes

The standard molar enthalpies of formation H _f ^00B0; (liq) at the temperature t = 298.15 K were determined using combustion calorimetry for N-methyl-3-methyl-3-phenyl-2-butaneamine 1a, N,N-dimethyl-3-methyl-3-phenyl-2-butaneamine 1b N-methyl-2,3-dimethyl-3-phenyl-2-butaneamine 2a, and N,N-dimethyl-2,3-dimethyl-3-phenyl-2-butaneamine 2b. The standard molar enthalpies of vaporization H _vap ^00B0; of these compounds were obtained from the temperature variation of the vapor pressure measured in a flow system. The following standard molar enthalpies of formation in gaseous phase H _f ^00B0; (g) are obtained from these data: for 1a – 10.9 ± 1.9; 1b – 3.6 ± 1.8; 1c – 26.6 ± 1.4, and 1d – 23.0 ± 1.8 kJ mol^–1. From the standard molar enthalpies of formation for gaseous compounds which are available in the literature, improved values for the increments of the Benson group addivitiy scheme of amines were calculated. They are used to determine the strain enthalpies of the amines 1 and 2 from this investigation.     

An attempt to parameterize the structuredness of solvents

An attempt has been made to parameterize the structuredness of solvents from the viewpoint of intermolecular interactions, and the structuredness parameter S _p has newly been proposed. The enthalpy of vaporization H _vap ^/o of various solvents has been considered to consist of donor-acceptor interaction energy (DA), which can been estimated from Gutmann's donor and acceptor numbers, some other interaction energies (VDW), which may not be fully described in terms of the donor-acceptor interactions and may be related to the electronic distribution, the volume and shape of the molecule, the polarizability and ionization potential of atoms in the molecule, the energies of these interactions being usually considered to be of Van der Waals type and possibly evaluated from the enthalpy of vaporization ofn-alkanes, and the intermolecular interaction energy (STR) due to the three-dimensional molecular ordering in the liquid: H _vap ^/o =DA+VDW+STR. The STR term obtained as the difference between H _vap ^/o and (DA+VDW) is defined as the structuredness parameter S _p , which is a dimensionless quantity by dividing the value with the (kJ-mol^–1) unit. The entropies of formation S ₁ ^o and S ₄ ^o of [MX]⁺ and [MX₄]^2– complexes, respectively, of divalent metal ions (Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, and Hg²⁺) with halide and thiocyanate ions in aqueous and nonaqueous solvents could be represented as an almost linear function of the structuredness parameters S _p .     

State of water in CB[6] and CB[8] cavitands

The state of water in cucurbiturils CB[6] and CB[8], which were synthesized in hydrochloric acid solutions of glycoluril and formaldehyde, was studied. The amount of water coordinated in the macrocycle cavity and on its portals was shown to depend on the moisture content of the medium, being 2.4 molecules per 1 molecule of CB[6] and 3.2 per 1 molecule of CB[8], and in CB[8] coordinated water exists in two energy states. The state with the vaporization parameters Δ_vap H ^○ _381.5 = 29.2±0.4 kJ mol^?1 and Δ_vap S ^○ _381.5 = 50.7±1.0 J mol^?1 K^?1 coincides with the state of water in CB[6]. For another state, the vaporization parameters are Δ_vap H ^○ ₃₇₃ = 31.7±0.5 kJ mol^?1 and Δ_vap S ^○ ₃₇₃ = 63.2±1.2 J mol^?1 K^?1. The number of molecules bound to the oxygen atoms of the macrocycle portals is 1.7 and 2.6 for CB[6] and CB[8], respectively.     

The structuredness of solvents. 2. Data for ambient conditions

In view of the inadequacy of Trouton's constant for the expression of the structuredness of solvents at ambient temperatures, alternative measures have been sought. Calculations of the entropy deficit _vapS⁰/R of solvents at ambient conditions relative to their vapors and compared to presumably unstructured alkanes with the same number and arrangement of skeletal atoms have been made. Data for nonpolar, dipolar aprotic, non-hydroxylic protic and hydroxylic solvents are presented, with _vapS⁰/R>2 representing structured solvents. Empirically, the heat capacity density of solvents at ambient temperatures, [C _p (l)-C _p (g)]/V], is another meaningful measure of the structuredness of solvents, compatible with the former one. Values>0.6 J-K^–1-cm^–3 signify a structured solvent.     

Synthesis,Characterization, DFT and Photocatalytic Studies of a New Pyrazine Cadmium(II) Tetrakis(4-methoxy-phenyl)-porphyrin Compound

This study describes the synthesis, theoretical investigations, and photocatalytic degradational properties of a new (pyrazine)(meso-tetrakis(4-tert-methoxyphenyl)-porphyrinato)-cadmium (II) ([Cd(TMPP)-Pyz]) complex (1). The new penta-coordinated Cd^II porphyrin complex (1) was characterized by various spectroscopic techniques, including FT-IR, NMR, UV-visible absorption, fluorescence emission, and singlet oxygen, while its molecular structure was studied using single crystal X-ray diffraction. The UV–Vis spectroscopic study highlighted the redshift of the absorption bands after the insertion of the Cd(II) metal ion into the TMPP ring. The co-coordination of the pyrazine axial ligand enhanced this effect. A fluorescence emission spectroscopic study showed a significant blueshift in the Q bands, accompanied by a decrease in the fluorescence emission intensity and quantum yields of Φ_f = 0.084, Φ_f = 0.06 and Φ_f = 0.03 for H₂-TMPP free-base porphyrin, [Cd(TMPP)] and [Cd(TMPP)(Pyz)] (1) respectively. Singlet oxygen revealed that the H₂-TMPP porphyrin produced the most efficient singlet oxygen quantum yield of (Φ_Δ = 0.73) compared to [CdTMPP] (Φ_Δ = 0.57) and [Cd(TMPP)(Pyz)] (1) (Φ_Δ = 0.13). In the crystal lattice, the [Cd(TMPP)Pyz] was stabilized through non-covalent intermolecular interactions (NCI), such as the hydrogen bonds C-H···N and C-H···Cg. Additionally, crystal explorer software was then utilized to measure the quantitative analysis of the intermolecular interactions in the unit cell of the crystal structure and established that the C-H···π interaction dominated. The Natural bond orbital (NBO) analysis revealed that each molecule is stabilized by hyperconjugation and charge delocalization. As a photocatalyst, the coordination complex 1 showed excellent photocatalytic activity toward the degradation of Levafix Blue CA reactive dye (i.e., dye photo-degradation of 80%).     

Synthesis,In Vitro Anti-Microbial Analysis and Molecular Docking Study of Aliphatic Hydrazide-Based Benzene Sulphonamide Derivatives as Potent Inhibitors of α-Glucosidase and Urease

A unique series of sulphonamide derivatives was attempted to be synthesized in this study using a new and effective method. All of the synthesized compounds were verified using several spectroscopic methods, including FTIR, ¹H-NMR, ¹³C-NMR, and HREI-MS, and their binding interactions were studied using molecular docking. The enzymes urease and α-glucosidase were evaluated against each derivative (1–15). When compared to their respective standard drug such as acarbose and thiourea, almost all compounds were shown to have excellent activity. Among the screened series, analogs 5 (IC₅₀ = 3.20 ± 0.40 and 2.10 ± 0.10 µM) and 6 (IC₅₀ = 2.50 ± 0.40 and 5.30 ± 0.20 µM), emerged as potent molecules when compared to the standard drugs acarbose (IC₅₀ = 8.24 ± 0.08 µM) and urease (IC₅₀ = 7.80 ± 0.30). Moreover, an anti-microbial study also demonstrated that analogs 5 and 6 were found with minimum inhibitory concentrations (MICs) in the presence of standard drugs streptomycin and terinafine.     

Contribution of thermal analysis to the description of transport phenomena of pesticides

The vaporization enthalpies of two acetanilide pesticides, alachlor (2’,6’-diethyl-N-(methoxymethyl)-2-chloroacetanilide) and metolachlor (2-chloro-N-(2-ethyl-6-methylphenyl)-N-[(1S)-2-methoxy-1-methylethyl] acetamide), were determined by processing non-isothermal thermogravimetry data according to the Clausius-Clapeyron equation. The reliability of the procedure proposed was tested carrying out some experiments at different heating rates using acetanilide as a reference compound. A good agreement is found among the vaporization enthalpies derived from all the multi-heating rate experiments as well as with the one predicted from the vapor pressure data taken from literature. The vaporization temperatures (T _vap=470±2 K and T _vap=479±2 K) and enthalpies (Δ_vap H°(436 K)=85±1 kJ mol^–1 and Δ_vap H°(436 K)=70±1 kJ mol^–1) for alachlor and metolachlor, were selected, respectively.     

Comparison of the Hydride-Donating Ability and Activity of Five- and Six-Membered Benzoheterocyclic Compounds in Acetonitrile

In this work, we compared the hydride-donating ability of five-membered benzoheterocyclic compounds (FMB) and six-membered benzoheterocyclic compounds (SMB), isomers of DMBI and DMIZ and of DMPZ and DMPX, using detailed thermodynamic driving forces [ΔG^o (XH)], kinetic intrinsic barriers (ΔG^≠_XH/X), and thermo-kinetic parameters [ΔG^≠° (XH)]. For DMBI and DMIZ, the values of ΔG^o (XH), ΔG^≠_XH/X, and ΔG^≠° (XH) are 49.2 and 53.7 kcal/mol, 35.88 and 42.04 kcal/mol, and 42.54 and 47.87 kcal/mol, respectively. For DMPZ and DMPX, the values of ΔG^o (XH), ΔG^≠_XH/X, and ΔG^≠° (XH) are 73.2 and 79.5 kcal/mol, 35.34 and 25.02 kcal/mol, and 54.27 and 52.26 kcal/mol, respectively. It is easy to see that the FMB isomers are thermodynamically dominant and that the SMB isomers are kinetically dominant. Moreover, according to the analysis of ΔG^≠° (XH), compared to the SMB isomers, the FMB isomers have a stronger hydride-donating ability in actual chemical reactions.     

Experimental Determination and Computational Prediction of Dehydroabietic Acid Solubility in (−)-α-Pinene + (−)-β-Caryophyllene + P-Cymene System

The solubility of dehydroabietic acid in (−)-α-pinene, p-cymene, (−)-β-caryophyllene, (−)-α-pinene + p-cymene, (−)-β-caryophyllene + p-cymene and (−)-α-pinene + (−)-β-caryophyllene were determined using the laser monitoring method at atmospheric pressure. The solubility of dehydroabietic acid was positively correlated with temperature from 295.15 to 339.46 K. (−)-α-pinene, p-cymene, and (−)-β-caryophyllene were found to be suitable for the solubilization of dehydroabietic acid. In addition, the non-random two liquid (NRTL), universal quasi-chemical (UNIQUAC), modified Apelblat, modified Wilson, modified Wilson–van’t Hoff, and λh models were applied to correlate the determined solubility data. The modified Apelblat model gave the minor deviation for dehydroabietic acid in monosolvents, while the λh equation showed the best result in the binary solvents. A comparative analysis of compatibility between solutes and solvents was carried out using Hansen solubility parameters. The thermodynamic functions of Δ_solH⁰, Δ_solS⁰, Δ_solG⁰ were calculated according to the van’t Hoff equation, indicating that the dissolution was an entropy-driven heat absorption process. The Conductor-like Screening Model for Real Solvents (COSMO-RS) combined with an experimental value was applied to predict the reasonable solubility data of dehydroabietic acid in the selected solvents systems. The interaction energy of the dehydroabietic acid with the solvent was analyzed by COSMO-RS.     

Thermochemical study of aliphatic and phenyl-substituted geminal diacetates

The standard enthalpies of combustion _c H ^o of aliphatic diacetates1 and aromatic diacetates2 were measured calorimetrically. The enthalpies of vaporization _vap H ^o or sublimation _sub H ^o of1 and2 were obtained from the temperature function of the vapor pressure measured in a flow system. From _f H ^o(g) of1 and2 new values of group increments for the estimation of standard enthalpies of formation of these classes of compounds were derived. The geminal interaction energy between the geminal acyloxy groups shows no anomeric stabilization.Geminal Substituent Effects, Part 12, for part 11 see Ref. 7.     

Dehydration of solids in different modes as a proof of their primary congruent dissociative vaporization

The main purpose of this paper is to prove the applicability of the mechanism of congruent dissociative vaporization (CDV) to the solid-state decomposition kinetics through the comparison of the fundamental theoretical relationship E_i/E_e=(a+b)/a resulted from this mechanism with experiment. It has been shown that the ratios of E_i and E_e parameters of the Arrhenius equation measured in the isobaric and equimolar modes (in the presence and absence of H₂O vapour) for 22 reactants with the general formula aSalt⋅bH₂O or aOxide⋅bH₂O are in agreement with the values of (a+b)/a. The relative standard deviation is only 17% and the correlation coefficient is close to 0.99. A probability of accidental correlation for all set of the E parameters taken from the literature is lower than 4⋅10^–16 . This strongly supports the validity of the CDV mechanism. The problem of stability of polyatomic molecules of inorganic salts in the gaseous state, which are the primary decomposition products of crystalline hydrates, was also discussed on the basis of recent mass spectroscopy studies. It was concluded that any doubts in the applicability of the CDV mechanism as a general mechanism of solid-state decomposition reactions are unsound.     

Fast method for the experimental determination of vaporization enthalpy by differential scanning calorimetry

A simple method is proposed to estimate the vaporization enthalpy of the palmitic acid (hexadecanoic acid) at its normal boiling temperature. Differential scanning calorimetry (DSC) was the technique used to directly measure these thermodynamic properties. The advantages of this method are its speed and small amount of sample required. In order to avoid evaporation and to ensure equilibrium conditions, the experiments were carried out including a-alumina in contact with the fatty acid. The effect of the alumina concentration is discussed. The obtained experimental data (T_bp=625.4±0.5 K, D_vap H=237.6±5.9 J g^-1) is compared with that obtained by using thermodynamic equations. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermochemistry of Amines: Experimental Standard Molar Enthalpies of Formation of N-Alkylated Piperidines

The standard molar enthalpies of formation _f H _m ^° (l) at the temperature T = 298.15 K were determined using combustion calorimetry for N-methylpiperidine (A), N-ethylpiperidine (B), N-propylpiperidine (C), N-butylpiperidine (D), N-cyclopentylpiperidine (E), N-cyclohexylpiperidine (F), and N-phenylpiperidine (G). The standard molar enthalpies of vaporization _l ^g H ^{m °} of these compounds were obtained from the temperature variation of the vapor pressure measured in a flow system. From these data the following standard molar enthalpies of formation in gaseous phase _f H _m ^° (g) were derived for: A –(61.39 ± 0.88); B –(88.1 ± 1.3); C –(105.81 ± 0.66); D –(126.2 ± 1.3); E ( –88.21 ± 0.75); F –(135.21 ± 0.94); G (70.3 ± 1.4) kJ · mol^–1. They are used to determine the strain enthalpies of the cyclic amines A–G. The N-alkylated piperidine rings have been found to be about strainless.     

The structuredness of solvents

The parameterization of the structuredness of a solvent as the difference between its molar heat of vaporization, Δ_vap H ^° and the sum of its internal donor-acceptor interactions (in terms of DN and AN) and its vdW interactions (in terms of Δ_vap H ^° of n-alkanes of the same molar volume) is criticized. As an alternative, the excess of the reduced Trouton constant, Δ_vapS^°/R over 12 and of Kirkwood's dipole correlation parameter g over 1.7 are suggested as criteria for the decision of whether a solvent is structured, both having to be met. Conversely, if either Δ_vapS^°/R is less than 11.6 or g is less than 1.3, then the solvent is to be considered unstructured. Exceptions are discussed.