Effects of Cr doping in electron-doped manganites La0.9Te0.1MnO3

The effects of Cr doping on Mn sites in the electron-doped manganites La_0.9Te_0.1MnO₃ have been studied by preparing the series La_0.9Te_0.1Mn_1−xCr_xO₃ (0.05≤x≤0.20). Upon Cr doping, both the Curie temperature T_C and magnetization M are suppressed. The resistivity measurements indicate that there exists a weak metal-insulator (M-I) transition for the sample with x=0.05, with an increase in the doping level, the M-I transition disappears and the resistivity increases. Thermopower S(T) exhibits a maximum near T_C for all samples. By fitting the S(T) and ρ(T) curves, it is found that the temperature dependences of both S(T) and ρ(T) in the high temperature paramagnetic (PM) region follow the small polaron conduction (SPC) mechanism for all samples. The fitting parameters obtained imply changes of both the average-hopping distance of the polarons and the polaron concentration with Cr doping in our studied samples. In the case of the thermal conductivity κ(T), the variation of κ(T) is analyzed based on the combined effects due to the suppression of the local Mn³⁺O₆ Jahn-Teller (JT) lattice distortion because of the substitution of Cr³⁺ for Mn³⁺ ions, which results in the increase in κ, and the introduction of the disorder due to Cr-doping, which contributes to the decrease in κ.     

Spin-state transition, magnetic, electrical and thermal transport properties of the perovskite cobalt oxide Gd0.7Sr0.3CoO3

The magnetization, resistivity ρ, thermoelectric power (TEP) S, and thermal conductivity κ in perovskite cobalt oxide Gd_0.7Sr_0.3CoO₃ have been investigated systematically. Based on the temperature dependence of susceptibility χ_g(T) and Seebeck coefficient S(T), a combination of the intermediate-spin (IS) state for Co³⁺ and the low-spin (LS) state for Co⁴⁺ can be suggested. A metal-insulator transition (MIT) caused by the hopping of σ* electrons (localized or delocalized e_g electrons) from the IS Co³⁺ to the LS Co⁴⁺ is observed. Meanwhile, S(T) curve also displays an obvious phonon drag effect. In addition, based on the analysis of the temperature dependence of S(T) and ρ(T), the high-temperature small polaron conduction and the low-temperature variable-range-hopping conduction are suggested, respectively. As to thermal conduction κ(T), rather low κ values in the whole measured temperature range is attributed to unusually large local Jahn-Teller (JT) distortion of Co³⁺O₆ octahedra with IS state.     

Charge order melting and magnetic transition in Nd0.5(1+x)Ca0.5(1−x)Mn(1−x)CrxO3 system

The magnetic property of double doped manganite Nd_0.5(1+x)Ca_0.5(1−x)Mn_(1−x)Cr_xO₃ with a fixed ratio of Mn³⁺:Mn⁴⁺=1:1 has been investigated. For the undoped sample, it undergoes one transition from charge disordering to charge ordering (CO) associated with paramagnetic (PM)-antiferromagnetic (AFM) phase transition at T<250 K. The long range AFM ordering seems to form at 35 K, rather than previously reported 150 K. At low temperature, an asymmetrical M-H hysteresis loop occurs due to weak AFM coupling. For the doped samples, the substitution of Cr³⁺ for Mn³⁺ ions causes the increase of magnetization and the rise of T_c. As the Cr³⁺ concentration increases, the CO domain gradually becomes smaller and the CO melting process emerges. At low temperature, the FM superexchange interaction between Mn³⁺ and Cr³⁺ ions causes a magnetic upturn, namely, the second FM phase transition.     

Magnetic exchange interactions induced by Cr-doping in perovskite manganites

The effect of Cr-doping on the structural, magnetic and transport properties of perovskite manganites La_0.8Ca_0.2Mn_1−xCr_xO₃ (0≤x≤0.7) has been investigated. The Curie temperature (T_C) of the Cr-doped samples is almost unchanged up to 30% of Cr-doping. The Cr-doped samples, however, undergo a transition from the parent metallic state to the insulating state below T_C. The dc and ac magnetization data suggest that ferromagnetic clusters induced by double exchange interaction between Cr³⁺ and Mn³⁺ ions and antiferromagnetic components driven by Cr³⁺/Mn⁴⁺ and Cr³⁺/Cr³⁺ interactions are present in the Cr-doped system, which is supported by comparative studies on magnetic and transport properties of LaMnO_3+δ and LaMn_0.75Cr_0.25O_3+δ.     

Cr-doping effect on the structural, magnetic, transport properties and Raman spectroscopy of La(2+x)/3Sr(1−x)/3Mn1−xCrxO3 perovskites

A series of the double-doping samples La_(2+x)/3Sr_(1−4x)/3Mn_1−xCr_xO₃ (0?x?0.25) with the Mn³⁺/Mn⁴⁺ ratio fixed at 2:1 have been fabricated. The structural, magnetic, transport properties and Raman spectroscopy have been investigated, and no apparent crystal structure change is introduced by Cr doping up to x=0.25. But the Curie temperature T_C and metal-insulator transition temperature T_MI are strongly affected by Cr substitution. The room temperature Raman spectra start exhibiting some new features following the increasing concentration of Cr substitutions. Moreover, it is worth noting that the frequency of the A_1g phonon mode can also be well correlated with the A-site mismatch effect (σ²), which is influenced mainly by the variety of the Sr content.     

Thermal transport properties in the normal state of CaAlxSi2−x superconductors

Normal state electrical and thermal properties, including electrical resistivity (ρ), Seebeck coefficient (S), and thermal conductivity (κ) of the CaAl_xSi_2−x (x=0.9-1.2) system were investigated. It is found that the electrical resistivity and Seebeck coefficient exhibit a typical metallic character throughout the temperature range investigated, and the metallicity of this series is enhanced with increase in Al/Si ratio. On the other hand, the thermal conductivity shows a weak temperature variation at low temperatures, whereas κ follows a T²-dependence for T>150 K. Analysis of the electronic thermal resistivity based on Klemen’s model reveals that the scattering of electrons from the defects and static imperfections becomes dominant as the temperature approaches T_c. These results are discussed in the light of simultaneous existence of various crystal structures and development of ultra-soft phonon mode recently observed in the CaAlSi system.     

Study of the magnetization and transport properties of the La(2+x)/3Sr(1−x)/3Mn1−xCrxO3 (0≤x≤0.2) system

The samples with the Mn³⁺/Mn⁴⁺ ratio fixed at 2:1 La_(2+x)/3Sr_(1−x)/3Mn_1−xCr_xO₃ (0≤x≤0.20) have been prepared. The magnetic, electrical transport, and magnetoresistance properties have been investigated. Remarkable transport and colossal magnetoresistance (CMR) effect, as well as cluster glass (CG) behaviors have been clearly observed in the samples studied. It was found that the Curie temperature T_c and insulator−metal transition temperature T_p1 are strongly affected by Cr substitution. The experiment observations are discussed by taking into account the variety of tolerance factors t; the effects of A-site radius 〈r_A〉 and the A-site mismatch effect (σ²).     

On the mixed valence of the chromium ions in the noncollinear ferrimagnetic spinels Mn1−xCuxCr2S4 (Where x = 0.85, 0.90, 0.95)

For the polycrystalline samples of Mn_1?xCu_xCr₂S₄ (x = 0.85, 0.90, 0.95) the magnetization was measured in the temperature range between 77 K and the Curie temperature, T_C, using a magnetic balance (Faraday's method) and pulsed magnetic fields up to 2.0 T. The magnetic susceptibility was measured between T_C and about 600 K. The Curie temperatures were obtained using the kink point method.In the temperature range between 4.2 and 77 K the magnetization was measured in stationary magnetic fields up to 14 T. The data indicate a noncollinear ferrimagnetic structure. The compounds under investigation can be treated as CuCr₂S₄ slightly doped with Mn, with a valence distribution Mn²⁺_1?xCu¹⁺_xCr³⁺_2?xCr⁴⁺_xS^2?₄.     

Influence of Ce doping on electrical and thermal properties of La0.7−xCexCa0.3MnO3 (0.0≤x≤0.7) manganites

The effect of Ce-doping on structural, magnetic, electrical and thermal transport properties in hole-doped manganites La_0.7−xCe_xCa_0.3MnO₃ (0.0≤x≤0.7) is investigated. The structure of the compounds was found to be crystallized into orthorhombically distorted perovskite structure. dc Susceptibility versus temperature curves reveal various magnetic transitions. For x≤0.3, ferromagnetic regions (FM) were identified and the magnetic transition temperature (T_C) was found to be decreasing systematically with increasing Ce concentration. The electrical resistivity ρ(T) separates the well-define metal-semiconducting transition (T_MS) for low Ce doping concentrations (0.0≤x≤0.3) consistent with magnetic transitions. For the samples with 0.4≤x≤0.7, ρ(T) curves display a semiconducting behavior in both the high temperature paramagnetic (PM) phase and low temperature FM or antiferromagnetic phase. The electron–phonon and electron–electron scattering processes govern the low temperature metallic behavior, whereas small polaron hopping model is found to be operative in PM phases for all samples. These results were broadly corroborated by thermal transport measurements for metallic samples (x≤0.3) in entire temperature range we investigated. The complicated temperature dependence of Seebeck coefficient (S) is an indication of electron–magnon scattering in the low temperature magnetically ordered regime. Specific heat measurements depict a broadened hump in the vicinity of T_C, indicating the existence of magnetic ordering and magnetic inhomogeneity in the samples. The observation of a significant difference between ρ(T) and S(T) activation energies and a positive slope in thermal conductivity κ(T) implying that the conduction of charge carriers were dominated by small polaron in PM state of these manganites.     

Structural, magnetotransport and morphological studies of Sb-doped La2/3Ba1/3MnO3 ceramic perovskites

We report here the structural, magnetotransport and morphological studies of Sb-doped La_2/3Ba_1/3Mn_1−xSb_xO₃ perovskite manganites. Pristine material La_2/3Ba_1/3MnO₃ (LBMO) shows two insulator-metal (I-M) transitions in the electrical resistivity-temperature (ρ-T) behavior. While the higher temperature transition (T_P1) at ∼340 K is reminiscent of the usual I-M transition in manganites, the lower temperature transition (T_P2) at ∼250 K has been ascribed to the grain boundary (GB) effects arising out of the ionic size mismatch between the ions present at the rare-earth site (La³⁺ and Ba²⁺). With Sb-doping T_P1 shifts to lower temperatures while T_P2 remains invariant up to 3% and shifts to lower temperature for 5%. Room temperature electrical resistivity and the peak values also increase successively with Sb-doping. Scanning electron micrographs of the samples exhibit a gradual increase in their grain sizes with Sb indicating a gradual decrease in the GB density. Shift of T_P1 with doping is explained on the basis of a competition between double-exchange and super-exchange mechanisms. The overall electrical resistivity increases and the shift in the electrical resistivity hump (T_P2) with Sb-doping is found related to be gradually decreasing GB density and the ensuing lattice strain increase at the GBs. The intrinsic magnetoresistance (MR) gets suppressed and extrinsic MR gets enhanced with Sb-doping. At T>T_P1, the electrical resistivity is found to follow the adiabatic polaron hopping model whereas the electron-magnon scattering is found to dominate in the metallic regime (T<T_P1).     

Spin-glass and spin-fluctuation in Mo-doped Ca3Co4O9 system

Structural, magnetic, resistivity and thermal transport measurements have been performed to study the Mo-doping effect on a layered cobaltite Ca₃Co_4−xMo_xO₉(0≤x≤0.4) system. The results indicate that the low-temperature magnetic behavior of the system changes from a ferrimagnetic state to a spin-glass-like state upon Mo doping, which is due to the decrease in the average valence of Co ions. Moreover, all the Mo-doped samples have a higher resistivity and larger thermopower S compared with the Mo-free sample. The variation in the resistivity and thermopower between the Mo-doped and the Mo-free samples is dominated by the change in the carrier concentration of the samples. In the Mo-doped samples with x≥0.1, both the resistivity and thermopower decrease gradually with increasing Mo-doping level, which is suggested to mainly originate from the variation in the carrier mobility of the samples. In addition, an obvious thermopower upturn is observed in the S(T) curve of all the Mo-doped samples, which can be explained by the enhancement of spin-fluctuation induced by Mo-doping.     

Electrical properties of perovskite-type La(Cr1−xMnx)O3+δ

Perovskite-type La(Cr_1−xMn_x)O_3+δ (0.0x1.0) was synthesized using a sol–gel process. The crystal structure of La(Cr_1−xMn_x)O_3+δ changes from orthorhombic to rhombohedral at x=0.6. The Mn⁴⁺ ion content increases monotonically in the range 0.2x1.0. The magnetic measurement of La(Cr_1−xMn_x)O_3+δ indicates that a Mn³⁺ ion is a high-spin state with (d)³(dγ)¹. The variation of the average (Cr, Mn)-O distance is explained by ionic radii of the Cr³⁺, the Mn³⁺, the Mn⁴⁺ ions. Since the log σT–1/T curve is linear and the Seebeck coefficient (α) is independent of temperature, it is considered that La(Cr_1−xMn_x)O_3+δ is a p-type semiconductor and exhibits the hopping conductivity.     

Synthesis and physical characterization of superconductivity-magnetism crossover compound RuSr2EuCeCu2O10−δ

We carefully studied the nonsuperconducting sample of the magneto-superconducting RuSr₂(Eu_1−xCe_x)Cu₂O_10−δ series with composition RuSr₂EuCeCu₂O_10−δ. This compound seems to exhibit a complex magnetic state as revealed by host of techniques like resistivity, thermopower, magnetic susceptibility, and MR measurements. The studied compound exhibited ferromagnetic like M(H) loops at 5, 20, and 50 K, and semiconductor like electrical conduction down to 5 K, with −MR^7 T of up to 4% at low temperatures. The −MR^7 T decreases fast above 150 K and monotonically becomes close to zero above say 230 K. Below, 150 K −MR^7 T decreases to around 3% monotonically down to 75 K, with further increase to 4% at around 30 K and lastly having a slight decrease below this temperature. The thermopower S(T) behavior closely followed the −MR^7 T steps in terms of d(S/T)/dT slopes. Further, both MR^7 T steps and d(S/T)/dT slopes are found in close vicinity to various magnetic ordering temperatures (T_mag) of this compound.     

Transport behavior and mechanism of conduction of simultaneously substituted Y and Fe in La0.7Ba0.3MnO3 perovskite

The electrical properties and the mechanism of conduction of the simultaneously substituted La_0.7−xY_xBa_0.3Mn_1−xFe_xO₃ perovskite (0≤x≤0.30) have been studied. The insertion of Y³⁺ and Fe³⁺ ions in the parent compound La_0.7Ba_0.3MnO₃ leads to an increase of the resistivity. The undoped sample (x=0) shows a metallic behavior, which can be fitted by the relation ρ(T)=ρ₀+ρ₂T²+ρ_4.5T^4.5, indicating the importance of electron-magnon scattering effects in this material. All the other samples (x≥0.10) are semiconductors throughout the studied temperature range (80-290 K). Several models have been used to fit their temperature-dependent resistivity: thermal activation, adiabatic nearest-neighbor hopping of small polarons (Holstein theory) and variable range hopping (VRH) models. The fits show that the electronic transport in semiconducting La_0.7−xY_xBa_0.3Mn_1−xFe_xO₃ is well described and dominated by the VRH mechanism, for which the hopping distance (a) grows with increasing Fe³⁺ doping, thus increasing the average hopping energy W.     

Study of magnetic properties of Mn1−xCuxCr2S4 by: High-temperature series expansions

The high-temperature series expansions method applied in the systems Mn_1−xCu_xCr₂S₄ in the range 0?x?1. The exchange interactions and the magnetic exchange energies are calculated by using the probability law. The high-temperature series expansions have been applied in the spinel Mn_1−xCu_xCr₂S₄ systems, combined with the Padé approximants method, to determine the magnetic phase diagram, i.e. T_C versus dilution x. The critical exponent associated with the magnetic susceptibility (γ) is deduced. The obtained value of γ is insensitive to the dilution ratio x and may be compared with other theoretical results based on 3D Heisenberg model.     

Stoichiometry,electrical properties,and electronic structure of Cr1.70Nb2.30Se10

Both powder and single-crystal X-ray investigations show that Cr_{1 + x}Nb_3?xSe₁₀ which belongs to the FeNb₃Se structure type, exists only in a narrow range of stoichiometry close to x=0.70. In contrast to the Fe analog, Cr_1.70Nb_2.30Se₁₀ undergoes no disticnt metal-insulator transition; the resistivity and the thermoelectric power remain of the same order as the temperature is lowered from 300 K to 4.2 K. The thermoelectric powers S of Fe_{1 + x}Nb_3?xSe₁₀ (0.25<x<0.40) and FeVNb₂Se₁₀, however, follow such a temperature T dependence as $\text{S∝}\text{1}\text{T}$ even at room temperature. On the basis of light-binding band calculations, these observations are interpreted in terms of the contribution of Cr or Fe d-orbitals to electron conduction.     

Jahn-Teller transition in Al doped LiMn2O4 spinel

Al-doped lithium manganese spinels, with starting composition Li_1.02Al_xMn_1.98−xO₄ (0.00<x≤0.06), are investigated to determine the influence of the Al³⁺ doping on the Jahn-Teller (J-T) cooperative transition temperature T_J-T. X-ray powder diffraction (XRPD), nuclear magnetic resonance, electron paramagnetic resonance, conductivity and magnetic susceptibility data are put into relation with the tetrahedral and octahedral occupancy fraction of the spinel sites and with the homogeneous distribution of the Al³⁺ ions in the spinel phase. It is observed that Al³⁺ may distribute between the two cationic sublattices. The J-T distortion, associated with a drop of conductivity near room temperature in the undoped sample, is shifted towards lower temperature by very low substitution. However, for x>0.04 T_J-T it increases with increasing x, as clearly evidenced in low temperature XRPD observations. A charge distribution model in the cationic sublattice, for Al substitution, is proposed to explain this peculiar behavior.     

Structural and luminescence characterization of synthetic Cr-doped Ni3(PO4)2

Ni_3–xCr_2x/3(PO₄)₂ (x=0 and 0.02) microcrystalline powders were obtained as single phases via a modified sol–gel Pechini-type in situ polymerizable complex method. The samples were characterized using scanning electron microscopy, X-ray diffraction, cathodoluminescence (CL), and thermoluminescence (TL) techniques. We found that Cr³⁺ doping modified the average particle and distribution. The mean particle size was 0.441 μm for Ni₃(PO₄)₂ and 0.267 μm for Ni_2.98Cr_0.013(PO₄)₂. The results also reveal that Cr³⁺ doping notably enhanced the CL and TL UV-blue emission.     

Cr-doping induced ferromagnetic behavior in antiferromagnetic EuTiO3 nanoparticles

We have synthesized a series of high quality EuTi_1−xCr_xO₃ (x = 0.0, 0.02, and 0.04) nanoparticles by simple sol-gel technique. The averaged grain size of these obtained nanoparticles displays no obvious change with Cr-doping and is about 100 nm. The structural and magnetic properties of EuTi_1−xCr_xO₃ (x = 0.0, 0.02, and 0.04) samples were detailedly investigated. It is found that the G-antiferromagnetic (G-AFM) ordering of pure EuTiO₃ can be significantly modified with slight Cr-doping, and finally the ferromagnetic behavior is enhanced for EuTi_1−xCr_xO₃ system with Cr-doping.     

Power factors of late rare earth-doped Ca3Co2O6 oxides

Polycrystalline samples of (Ca_1−xR_x)₃Co₂O₆ with R = Gd, Tb, Dy and Ho at x=0-0.1 were synthesized and the effects of rare earth substitution on their thermoelectric properties were investigated. In the high-temperature region, the rare earth substitution resulted in an increase in the Seebeck coefficients (S), and the S values increased with decreasing ionic radius of rare earth elements in the order Gd³⁺>Tb³⁺>Dy³⁺>Ho³⁺. In contrast, the influence of rare earth substitution on the electrical resistivity was small. The high-temperature power factor was thereby improved by the late rare earth substitutions, particularly those with Ho³⁺ for Ca²⁺. For the Ho-doped samples (x≤0.05), the power factor was significantly improved by increasing Ho concentration.