Thermal stabilities of copolymers of styrene and methacrylic acid and their salts

The thermal stabilities of copolymers of styrene and methacrylic acid and their sodium salts have been studied. The values of the thermal stability IDT,T _s and the kinetic parametersn, E, S andZ have been determined and the results are discussed. It has been found that the thermal stabilities of the investigated copolymers of styrene and methacrylic acid and their sodium salts are practically independent of the amount of methacrylic acid or sodium methacrylate introduced.     

Thermodynamic characteristics and the temperatures of relaxation transitions of poly(methacrylic acid)

The heat capacity of poly(methacrylic acid) containing 2.5 wt % water was measured in a vacuum adiabatic calorimeter at temperatures between 80 and 325 K. The heat capacity of anhydrous poly(methacrylic acid) was calculated, and its standard enthalpies of combustion and formation were determined. On the basis of the enthalpy of melting of the “free”-water phase, the limit of water solubility in the polymer was found calorimetrically at 273 K. The temperatures of relaxation transitions (the glass transition and the β and γ transitions) of poly(methacrylic acid) mixtures with water were determined via differential thermal analysis in the region 80–550 K. In addition, the determination of the temperatures of transitions of anhydrous poly(methacrylic acid) was performed via extrapolation to zero water content of the concentration dependences of the relaxation-transition temperatures.     

Investigations of the thermal degradation of polymer metal precursors for high temperature superconducting ceramics

Polymer metal precursors are characterized by thermal degradation and mass spectrometric thermal analysis while the HTS phases are characterized by X-ray diffraction and measurements of the electrical resistance. It is to be assumed that the methacrylic acid groups of the polymer does not only form salts with the metal ions but also complexes.     

Synthesis of macromonomers bearing hydrolyzable segments derived from α‐hydroxyalkanoic acids

Methacrylic macromonomers bearing hydrolyzable oligoester segments are prepared by derivatization of oligo(α‐hydroxyalkanoic acids) (obtained by thermal polycondensation) with methacrylic acid and copolymerized with tert‐butyl acrylate.     

Synthesis and thermal self-crosslinking reaction of polymer containing spiro ortho ester and carboxylic acid

Polymers with both pendant spiro ortho ester and carboxylic acid moieties were synthesized by partial esterification of poly(methacrylic acid), poly(methacrylic acid-co-methyl methacrylate), or poly(methacrylic acid-co-styrene) with halomethylated spiro ortho esters in the presence of 1,8-diazabicyclo[5,4,0]undecene-7 in dimethyl sulfoxide. The extent of esterification increased with increasing reaction temperature. The reaction of polymeric carboxylic acids with chloromethylated spiro ortho esters proceeded to 80% of conversion at 100°C for 120 h. In contrast, the degree of esterification with bromomethylated spiro ortho ester reached 80% at 60°C within 24 h. Thermo-crosslinking of polymers having pendant spiro ortho ester moiety and carboxylic acid could be effected in films. The rate of spiro ortho ester ring-opening increased with increasing reaction temperature and with increasing content of carboxylic acid groups in the polymer. Further, the rates of gel production were also measured. The polymer containing an equimolar mixture of spiro ortho ester moieties and carboxylic acids exhibited the highest reactivity. In addition, it was found that thermal crosslinking reaction of the polymer occurred with minimum volume shrinkage.     

Complexation Constants of Lanthanide Ions with Poly(Methacrylic Acid) and its Copolymers

Complexation of some lanthanide ions with poly(methacrylic acid) and its copolymers was studied by potentiometric titration. Poly [methacrylic acid-co-oligo(ethylene oxide)methacrylate] and poly(methacrylic acid-co-acrylamide) formed tris-carboxylate coordinate lanthanide complexes with large overall complexation constants, while poly-(methacrylic acid)s and copolymer with higher content of the methacrylic acid residue formed bis-coordinate ones. It was concluded that the comonomer residues in the copolymer chains decreased the steric hindrance for the complexation and/or acted as co-coordinating groups of the carboxylic group to lanthanide ions. Very large positive and favorable entropy changes were observed for the complexation with poly(methacrylic acid) and its copolymers. This contribution of thermodynamic parameters to the complexation was contrary to that for the analogous monomeric methacrylic acid complex and is assumed to be induced by dehydration of the polymers through the lanthanide ion complexation.     

Preparation and Characterization of Poly(N‐Vinylpyrrolidone‐co‐Methacrylic Acid) Hydrogels

In this study, N‐vinylpyrrolidone (VP)/methacrylic acid (MAA) copolymers have been prepared at three different mole percents, the methacrylic acid composition being around 5, 10, 15%. MAA and VP monomer mixtures have been irradiated in ⁶⁰Co‐γ source at different irradiation doses and percent conversions have been determined gravimetrically. ～80% conversion of monomers into hydrogels were performed at 3.4 kGy irradiation dose. These hydrogels were swollen in distilled water at pH 4.0, 7.0, and 9.0. P(VP/MAA) hydrogel which contains 5% methacrylic acid showed the maximum % swelling at pH 9.0 in water. Diffusion of water was found to be of non‐Fickian character. Diffusion coefficients of water in P(VP/MAA) hydrogels were calculated. Initial swelling rates of P(VP/MAA) hydrogels increased with increasing pH and MAA content in hydrogels. Swelling kinetics of P(VP/MAA) hydrogels was found to be of second order. Thermal behavior of PMAA, PVP and P(VP/MAA) hydrogel were investigated by thermal analysis. P(VP/MAA) hydrogel gained new thermal properties and the temperature for maximum weight loss and temperature for half‐life of P(VP/MAA) hydrogel were determined.     

Thermal degradation of iron polymethacrylate

Iron polymethacrylate was synthesized by free radical solution polymerization of methacrylic acid, followed by replacement of the carboxylic proton with iron. Thermal volatilization analysis and thermogravimetry were used to study its thermal stability from ambient temperature up to 500oC. The results reveal that ferric oxide is left as residue at the end of the thermal degradation experiments.The authors dedicate this paper to the memory of the late Dr. Mohammad Zulfiqar of Quaid i Azam University, Islamabad, Pakistan.     

Microstructural Characterization of Diblock Copolymers Formed by Styrene and Different Methacrylic Units

FT-IR, DSC, and NMR techniques allowed the structural characterization of four copolymers formed by styrene and methacrylic units (methacrylic acid (MAA), dimethylamine ethyl methacrylate (DMAEMA), sodium methacrylate (MANa), and 1-hydroxyethyl methacrylate (HEMA). The copolymer composition was studied by Fourier transform-infrared spectroscopy (FT-IR) and nuclear magnetic resonance (NMR) spectroscopy. The thermal behavior of the block copolymers was analyzed by differential scanning calorimetry (DSC). Three of the four copolymers showed two transitions caused by changes in the polymer heat capacity (ΔCp) of each block. Diffusion-ordered spectroscopy (DOSY) experiments were used to distinguish copolymer from homopolymer mixtures. Finally, the triad-level stereosequences of styrene-methacrylic copolymers were obtained using ¹³C NMR. The results indicate that by increasing the alkyl-substituent length in the methacrylic block, the probability of syndiotactic polymerization increases.     

Synthesis of methacrylic copolymers with nona‐1‐butoxy trititanosiloxane as side groups and its application as a thermosetting resin

Methacrylic copolymers with a hydroxyl group on one end of the main chain and nona‐1‐butoxytrititanosiloxane as side groups (called methacrylic hybrid copolymers) were synthesized for use as baked‐finish‐type coating resins. The chemical structures of the side groups in the methacrylic hybrid copolymers were confirmed with the ash weight of the copolymers after combustion, the elemental ratio analysis of Si and Ti in the ash determined by inductively coupled plasma emission spectrometry, and the characteristic absorption band determined by Fourier transform infrared spectrophotometry. The methacrylic hybrid copolymers were cured at temperatures less than 150 °C in the absence of a curing accelerator. The cured copolymers exhibited a high thermal stability. The curing temperature of the copolymers was determined by the change in the absorption peak strength (peak area) of the 1655 cm⁻¹ band in the IR difference spectrum. The thermal stability of the copolymers was evaluated as the thermal‐degradation temperature measured by thermogravimetric analysis. The methacrylic hybrid copolymers were then be used as effective curing resins. The mixture, consisting of thermoplastic methacrylic terpolymer with hydroxyl and carboxyl groups and the methacrylic hybrid copolymers, were cured at less than 150 °C in the absence of a curing accelerator and exhibited a higher thermal‐degradation temperature than the copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1090–1098, 2001     

Inhibiting effect of fullerenes C<Subscript>60</Subscript> and C<Subscript>70</Subscript> on high-temperature oxidative degradation of copolymers of methyl methacrylate with methacrylic acid and methacrylamide

The inhibiting effect of fullerenes on thermal oxidative degradation of copolymers of methyl methacrylate with methacrylic acid and methacrylamide at 340°C was studied.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 12, 2004, pp. 2047–2049.Original Russian Text Copyright © 2004 by Troitskii, Khokhlova, Konev, Denisova, Novikova.     

Effect of introducing acrylic and methacrylic acid groups on molecular relaxation of poly(ethyl methacrylate)

Dielectric and infrared data have been obtained over a wide temperature range on copolymers of ethyl methacrylate with methacrylic and acrylic acid synthesized by radical copolymerization. The dissociation energy ΔH⁰ for the acid dimer in the copolymer is estimated from the temperature dependence of the relaxation strength Δε_α of the α relaxation, which is associated with the glass transition. The value of δH⁰ obtained by this method is in fair agreement with that determined by infrared (IR) spectroscopy. The strength of the α relaxation and its activation energy are both increased by the incorporation of methacrylic acid units but are decreased by acrylic acid units. This behavior is attributed to the restriction of main-chain motions by hydrogen-bonded acid dimers in the copolymers with methacrylic acid and to the incorporation of more flexible links in the copolymers with acrylic acid. The β relaxation observed below the glass transition temperatures is almost unaffected by the incorporation of methacrylic acid.     

光引发甲基丙烯酸聚合改性羟基磷灰石表面的研究

羟基磷灰石(HPA)具有良好的生物相容性和生物活性,被认为是最有前途的陶瓷人工齿和人工骨置换材料。然而,纯HAP的力学性能比较差,断裂韧性(KIC)不超过1.0MPa.m1/2(自然骨为2-12MPa.m1/2)[1],作为人工种植体其使用可靠性较差。这大大限制了它在承载部位骨替换中的应用。为了改善     

Block copolymer micelles in aqueous media

Polystyrene-block-poly(methacrylic acid) and poly(methacrylic acid)-block-polystyrene-block-poly(methacrylic acid) di- and triblock copolymers form micelles with polystyrene cores and poly(methacrylic acid) shells when dissolved in water/1, 4-dioxane mixtures, rich in dioxane. These micelles can be transferred into water rich mixtures, into water, and into aqueous buffers by stepwise dialysis. Quasielastic light scattering and sedimentation velocity experiments show that in dioxane rich mixtures exists a dynamic micellization equilibrium, while in dioxane poor solutions and in aqueous buffers the equilibrium is frozen. The process of mixed micelles formation was observed in dioxane rich solutions.     

Thermochemical reactions in polycomplexes

Polycomplex formation between poly(methacrylic acid) and polyacrylamide in aqueous solutions has been studied by means of viscometry, potentionetry and elemental analysis. Stoichiometry of the polycomplex was found to be 1:1 with respect to unit-moles. I.R.-spectroscopic data give evidence of the co-existence of ladder-like regions and loops in the polycomplexes formed by poly(methacrylic acid) with polyacrylamide and poly(ethylene glycol). The reactivities of the same functional groups in ladder-like regions and loops are different. This difference has been shown taking as an example thermochemical reactions in the above polycomplexes. Dehydrocyclization in the poly(methacrylic acid) chain was found to occur in the loops of both polycomplexes. This intramolecular reaction in the polycomplex of poly(methacrylic acid) with polyacrylamide is followed by intermolecular formation of imide bonds in ladder-like regions.     

Copolymerization of vinyl acetate and unsaturated acids in the presence of germanium tetrachloride in methanol

The influence of catalytic amounts of germanium tetrachloride on the copolymerization of vinyl acetate with acrylic acid and methacrylic acid in methanol is examined. It is shown that germanium tetrachloride exerts different effects on the formation rate, molecular-mass characteristics, and composition of copolymers formed in these systems. For example, at a germanium tetrachloride-to-acrylic acid ratio of 0.02 (mol/mol), an alternating copolymer is formed, whereas in the case of methacrylic acid, a copolymer considerably enriched with methacrylic acid units is produced at the same ratio. The results are explained by different copolymerization mechanisms for both systems.     

Thermal stability and degradation mechanisms of poly(acrylic acid) and its salts: Part 3—Magnesium and calcium salts

The magnesium and calcium salts of acrylic acid have been polymerised in aqueous solution using ammonium persulphate as initiator. Both polymers were also prepared by the neutralisation of poly(acrylic acid) with metal oxide in the same medium.

The thermal degradation behaviour of magnesium and calcium polyacrylate was studied using thermogravimetry (TG), differential thermal analysis (DTA) and thermal volatilisation analysis (TVA). Degradation products were investigated by IR spectroscopy, mass spectrometry and GC-MS techniques, the volatile product fraction having first been separated by subambient TVA.

The decompositions of these materials show some similarities to the behaviour of the alkali metal salts of poly(acrylic acid) and to that of the alkaline earth metal salts of poly(methacrylic acid), but there are also important differences. Acetone and carbon dioxide are the most important volatile products and, in addition, there are various other carbonyl containing products. More carbon dioxide, resulting from side group scission, is evolved from magnesium polyacrylate than from calcium polyacrylate, because of the lower thermal stability of magnesium carbonate.     

Cs_yP_（1．33）－kMo_（12）SblCu_mV_nAs_kO_x催化剂的研究

以共沉淀方法制备了杂多酸盐催化剂ＣｓｙＰ１．３３－ｋＭｏ１２ＳｂｌＣｕｍＶｎＡｓｋＯｘ．利用ＩＲ及ＳＥＭ研究了催化剂的结构，ＤＳＣ研究了催化剂的稳定性，ＥＳＲ研究了催化剂的氧化还原性，及ＮＨ３－ＴＰＤ研究了催化剂的酸性．同时考察了催化剂对异丁醛一步氧化制甲基丙烯酸的催化性能，并与催化剂的氧化还原性进行了关联．发现Ｃｓ１．５Ｐ１．１３Ｍｏ１２Ｓｂ０．２５Ｃｕ０．２５Ｖ０．２５Ａｓ０．２０Ｏｘ催化剂使异丁醛氧化的目的产物甲基丙烯酸收率最高，达７０．１％．     

Synthesis of a molecularly imprinted polymer for the selective recognition of carmoisine (Azorubin E122) from pomegranate juice

Since natural pigments are lost during the processing of beverages such as pomegranate juice, carmoisine, as an adulterant, is often added into the pure juice to improve color characteristics. In this study, molecularly imprinted polymers, as an adsorbent of carmoisine, were synthesized using acrylamide, methacrylic acid, and 4‐vinylpyridine as functional monomers and then they were evaluated in terms of the separation and detection of carmoisine. Experiments on the batch adsorption of carmoisine 10 ppm stock solution revealed a better binding capacity for the 4‐vinylpyridine‐based polymer in comparison to methacrylic acid and acrylamide polymers. The complexation of carmoisine with the 4‐vinylpyridine‐based polymer was confirmed by Fourier transform infrared spectroscopy. The synthesized polymer exerted a high thermal degradation point and average diameter of polymer particles were obtained to be 0.2 μm by dynamic light scattering analysis. This work showed that detection of pomegranate juice adulteration with carmoisine is not necessarily difficult, time consuming or expensive with selective separation techniques such as molecularly imprinted polymers.     

Theoretical and experimental research on self‐assembly system of molecularly imprinted polymers formed via chloramphenicol and methacrylic acid

Chloramphenicol was chosen as the imprinting molecule and the methacrylic acid was chosen as the functional monomer to prepare molecularly imprinted polymers. Ethylene glycol dimethacrylate, pentaerythritol triacrylate, and trimethylolpropane trimethylacrylate were used as the cross‐linking agents, respectively. The interaction processes between chloramphenicol and methacrylic acid were simulated by using the ωB97XD/6‐31G (d,p) method. The self‐assembled configuration, bonding sites, binding number, binding energy, and interaction principle of stable complex formed by chloramphenicol and methacrylic acid with different molar ratios have been studied. The selectivity of the most stable complex formed from chloramphenicol and methacrylic acid was discussed with the thiamphenicol and florfenicol as the analogues of chloramphenicol. The results showed that chloramphenicol and methacrylic acid were interacted through the hydrogen bonds. When the molar ratio was 1:10 and pentaerythritol triacrylate as the cross‐linking agent, the ordered complex formed by chloramphenicol and methacrylic acid has the largest amount of hydrogen bonds and the lowest binding energy. Scatchard analysis showed that the maximum apparent adsorption capacity was 173.3 mg/g (0.536 mol/g), and the selection factor of florfenicol was the largest. This study provides a reliable theoretical and experimental basis for the design, preparation, and characterization of chloramphenicol molecularly imprinted polymers.