2,4-二硫代尿嘧啶的紫外吸收光谱和共振拉曼光谱

硫代嘧啶碱基是光动力疗法潜在的重要光敏剂,其最低单重激发态的光物理研究已有广泛报道。然而,其较高激发态的跃迁性质和反应动力学研究较为稀少。因此,本文采用共振拉曼光谱和密度泛函理论计算方法研究2,4-二硫代尿嘧啶的紫外光谱和几个较高单重激发态的短时结构动力学。首先,基于共振拉曼光谱强度与电子吸收带振子强度f的关系,将紫外光谱去卷积成四个吸收带,分别为358 nm(f=0.0336)中等强度吸收带(A带),338 nm(f=0.1491)、301 nm(f=0.1795)和278 nm(f=0.3532)强而宽的吸收带(B、C和D带)。这一结果既吻合密度泛函理论计算结果,又符合共振拉曼光谱强度模式对紫外光谱带的预期。据此,去卷积得到的四个吸收带被分别指认为S0→S2跃迁、S0→S6跃迁、S0→S7跃迁和S_0→S_8跃迁。同时,分别对B,C和D带共振拉曼光谱进行了详细的指认,获得了短时动力学信息。结果表明,S_8态短时动力学的显著特征是在Franck-Condon区域或附近发生了S8(ππ~*)/S(nπ~*)势能面交叉引发的、伴随超快结构扭转的非绝热过程。S7和S6态短时动力学的主要特征是反应坐标的多维性,它们分别沿C_5C_6/C_2S_8/C_4S_(10)/N_2C_3+C_4N_3H_9/N_1C_2N_3/C_2N_1C_6/C_6N_1H_7/C_5C_6H_(12)和C_5C_6/N_3C_2/C_4S_(10)/C_2S_8+C_6N_1H_7/C_5C_6H_(12)/C_5C_6N_1/C_5C_6H_(12)/C_2N_1C_6/N_1C_2N_3/C_4N_3H_9/N_1C_2N_3等内坐标演化。     

Thermodynamic characterization of ternary solutions of uncharged polymers

The thermodynamic interactions in aqueous solutions of uncharged polymers were studied. Using a gel-deswelling method, the water activities (chemical potentials) in binary and ternary (two polymers in one solvent) solutions of methylcellulose (MC), polyvinyl alcohol (PVA) and polyvinyl pirrolidone (PVP), respectively were determined at various polymer volume fractions (1.0 × 10⁻² < v₂ < 1.0 × 10⁻¹). On the theoretical basis of the Flory–Huggins approximations, the relevant solvent–segment (χ₁₂ or χ₁₃) and segment–segment pair interaction parameters (χ₂₃) have been calculated.

The solvent activity curves (ln a₁ versus polymer volume fraction) can be well described by a polynomial of third-degree in both the binary and the ternary solutions of the polymers. The solvent–segment interaction parameters exhibit a slight dependence on the polymer concentration. For each binary solution, the χ₁₂−v₂ function can be fitted by a straight line wich has a small positive slope. In the mixtures of two polymers, the values of the segment–segment (χ₂₃) interaction parameters were close to zero or sligthly negative (χ₂₃ 0 ± 0.03), indicating that under the studied conditions, the polymers in the ternary solutions are compatible.     

Kinetics study of the gas-phase reactions of C2F5OC(O)H and n-C3F7OC(O)H with OH radicals at 253–328 K

The rate constants, k₁ and k₂ for the reactions of C₂F₅OC(O)H and n-C₃F₇OC(O)H with OH radicals were measured using an FT-IR technique at 253–328 K. k₁ and k₂ were determined as (9.24 ± 1.33) × 10⁻¹³ exp[−(1230 ± 40)/T] and (1.41 ± 0.26) × 10⁻¹² exp[−(1260 ± 50)/T] cm³ molecule⁻¹ s⁻¹. The random errors reported are ±2 σ, and potential systematic errors of 10% could add to the k₁ and k₂. The atmospheric lifetimes of C₂F₅OC(O)H and n-C₃F₇OC(O)H with respect to reaction with OH radicals were estimated at 3.6 and 2.6 years, respectively.     

X-ray investigation of the nematic and reentrant nematic phases of N-[(4-n-octyloxybenzoyloxy)-salicilidene]-4'-cyanoaniline

We have performed an X-ray scattering study of the nematic-smectic A and reentrant nematic-smectic A phase transitions in N-[(4-n-octyloxybenzoyloxy)-salicilidene]-4'-cyanoaniline (OOBOSCA). A diffractometer with a linear position sensitive detector was used. The results show that the smectic phase in OOBOSCA is of the A_d type with an interlayer spacing incommensurate with the molecular length L; d ∽ 1·2L. In the reentrant nematic phase two types of fluctuation modes were found. One of them corresponds to the monolayer wavevector q₁ ∽ 2π/L, and the other is due to the partial bilayer fluctuations with the wavevector q₂ ∽ 0·8q₁. The temperature dependences of the interlayer spacing, X-ray scattering intensity and longitudinal correlation length for both types of layering in the reentrant nematic phase are presented. The change of the fluctuation regime from S_Ad, to S_Cd type with decreasing temperature in the reentrant nematic phase of OOBOSCA was found. The results are discussed on the basis of models with competing order parameters. The influence of alkyl chain flexibility on the stability of a partial bilayer smectic phase is also considered.     

Time-resolved vibrational cemiluminescence: Rate constants for the reaction F + HC1 → HF + Cl and for the relaxtion of HF(v = 3) by HCl, CO2, N2O, CO, N2 and O2

The reaction: F + HCl→ HF (v 3) + Cl (1), has been initiated by photolysing F₂ using the fourth-harmonic output at 266 nm from a repetitively pulsed Nd: YAG laser By analysing the time-dependence of the HF(3,0) vibrational chemiluminescence, rate constants have been determined at (296 ± 5) K for reaction (1), k₁ = (7.0 ± 0.5) × 10⁻¹² cm³ molecule⁻¹ s⁻¹, and for the relaxation of HF(v = 3) by HCl, CO₂, N₂O, CO, N₂ and O₂: k_HCl = (1.18 ±0.14) × 10⁻¹¹ k_CO2 = (1.04 ± 0. 13) × 10⁻¹², k_N2O = (1.41 ± 0.13) × 10⁻¹¹ k_CO = (2.9 ± 0.3) × (10⁻¹², k_N2 = (7.1 ± 0.6) × 10⁻¹⁴ and k_O2 = (1.9 ± 0.6) × 10⁻¹⁴ cm³molecule⁻¹s⁻¹.     

Ab initio structural trends and torsional sensitivity in n-hexane and comparisons with crystallographic structural results

The molecular structures of n-hexane were determined by RHF/4-21G ab initio geometry optimization at 30° grid points in its three-dimensional τ₁(C11–C8–C5–C1), τ₂(C14–C11–C8–C5), τ₃(C17–C14–C11–C8) conformational space. Of the resulting 12×12×12=1728 grid structures, 468 are symmetrically non-equivalent and were optimized constraining the torsions τ₁, τ₂, and τ₃ to the respective grid points, while all other structural parameters were relaxed without any constraints. From the results, complete parameter surfaces were constructed using natural cubic spline functions, which make it possible to calculate parameter gradients, |P|=[(∂P/∂τ_i)²+(∂P/∂τ_j)²]^1/2, where P is a C–C bond length or C–C–C angle. The parameter gradients provide an effective measure of the torsional sensitivity of the system and indicate that dynamic activities in one part of the molecule can significantly affect the density of states, and thus the contributions to vibrational entropy, in another part. This opens the possibility of dynamic entropic conformational steering in complex molecules; i.e. the generation of free energy contributions from dynamic effects of one part of a molecule on another. When the conformational trends in the calculated C–C bond lengths and C–C–C angles are compared with average parameters taken from some 900 crystallographic structures containing n-hexyl fragments or longer C–C bond sequences, some correlation between calculated and experimental trends in angles is found, in contrast to the bond lengths for which the two sets of data are in complete disagreement. The results confirm experiences often made in crystallography. That is, effects of temperature, crystal structure and packing, and molecular volume effects are manifested more clearly in bond lengths than bond angles which depend mainly on intramolecular properties. Frequency analyses of the τ₁, τ₂ and τ₃ torsional angles in the crystal structures show conformational steering in the sense that, if τ₁ is trans peri-planar (170°≤τ₁≤180°; −180°≤τ₁≤−170°), the values of τ₂ and τ₃ are clustered closely around the ideal gauche (±60°) and trans (±180°) positions. In contrast, when τ₁ is in the region (50°≤τ₁≤70°), there is a definite increase in the populations of τ₂ and τ₃ at −90 and −150°.     

三环已基锡L-扁桃酸酯配合物的合成、结构及性质

三环己基氢氧化锡与L-扁桃酸(物质的量比1:1)在苯和乙醇混合溶剂中反应合成了三环己基锡L-扁桃酸酯。 经X射线衍射方法测定了其晶体结构,配合物属斜方晶系,空间群为P2₁2₁2₁,晶体学参数a=0.80825(4) nm,b=1.77151(8) nm,c=1.8385(2) nm,α=β=γ=90°,V=2.6324(2) nm³,Z=4,D_c=1.310 g/nm³,μ(MoKα)=9.92 cm^-1,F(000)=1080,R₁=0.0472,wR₂=0.1341。 中心锡原子与环己基碳原子和氧原子构成畸型四面体。 对其结构进行量子化学从头计算,探讨了配合物的稳定性、分子轨道能量以及一些前沿分子轨道的组成特征。 研究了配合物的热稳定性、电化学性能、圆二色谱和体外抗癌活性。     

Molecular structure of 4,4′-sulfandiyl-bis-thiophenol from electron diffraction

The molecular structure of 4,4′-sulfanidyl-bis-thiophenol (C₁₂H₁₀S₃) has been determined by gas electron diffraction. Assuming identical geometry and D_2h local symmetry for ---SC₆H₄S--- moieties, the following bond lengths (r_g) and bond angles were obtained: C---H = 1.101 ± 0.005, S---H = 1.388 ± 0.019, (C---C)_mean = 1.400 ± 0.003, (S---C)_mean = 1.778 ± 0.004 Å, C_ar---S---C_ar = 103.5 ± 1.3, C---C(S)---C = 120.4 ± 0.3, C(H)---C(H)---H = 119.1 ± 0.9 and C---S---H = 94.6 ± 3.1°. Two ratational forms were found to reproduce the experimental data, characterized by dihedral angles of the benzene rings with respect to the C_arSC_ar plane; ₁ = 67.8 ± 2.0°, ₂ = 4.5 ± 7.2°, and ₁ = 69.4 ± 2.0δ, ₂ = −26.6 ± 7.1°. Identical signs of ₁ and ₂ indicate that the two benzene rings are rotated in the same direction about the respective S_central---C axes.     

The dehydroxylation of basic aluminum sulfate: An infrared emission spectroscopic study

The tridecameric aluminum polymer [AlO₄Al₁₂(OH)₂₄(H₂O)₁₂]⁷⁺ was prepared by forced hydrolysis of Al³⁺ up to an OH/Al molar ratio of 2.2. Upon addition of sulfate, the tridecamer crystallized as the monoclinic basic aluminum sulfate Na_0.1[AlO₄Al₁₂(OH)₂₄(H₂O)₁₂](SO₄)_3.55. The dehydroxylation of the basic aluminum sulfate has been studied by Fourier transform in-situ infrared emission spectroscopy over a temperature range of 200° to 750°C at 50°C intervals. The spectrum is characterized by the sulfate ν₁ (1024 cm⁻¹), ν₃ doublet (1117 and 1168 cm⁻¹) and the ν₄ doublet (568 and 611 cm⁻¹) modes. Furthermore, minor bands assigned to nitrate are observed. Upon heating from ≈350° to 400°C major changes are observed, especially in the bandwidth and band intensities. The bands in the hydroxyl stretching region due to the Al₁₃ group disappear, whereas the bands around 1050 cm⁻¹ display various changes in bandwidths, intensities and positions associated with the dehydration and dehydroxylation of the basic sulfate and the changing of the structure into an aluminum oxosulfate. The nitrate bands diminish upon heating.     

Determination of stability constants for rare earth elements and fulvic acids extracted from different soils

Fulvic acids (FAs) were extracted by alkali extraction from different soil samples in China, then purified using resins and characterized by Fourier transform infrared spectroscopy. The complexing ability of FAs was investigated by measuring the stability constants of rare earth elements (REEs) (La³⁺, Ce³⁺, Sm³⁺, Gd³⁺, Y³⁺) with FAs by the ion exchange technique. The results indicated that maximum binding ability forY³⁺ (4.414.44) was higher than other REEs (La³⁺, Ce³⁺, Sm³⁺, Gd³⁺) (0.721.03). There were two types of binding sites in the functional groups of fulvic acids. The complexing reaction followed two steps. The stability constants (K₁ and K₂) of REEs with FAs were calculated from experimental data by division of Scatchard plots into two straight-line segments. Y³⁺ (log K₁=5.72±0.05, log K₂=4.83±0.01) also has higher stability constants than the other four REEs (log K₁=4.37±0.16, log K₂=3.62±0.28).     

Microwave spectrum and conformation of isopropyl fluoroformate

The microwave spectrum of isopropyl fluoroformate is characterized by intense a-type R-branch transitions from one conformational species. The rotational constants of the ground state, A₀ = 4967.0(8) MHz, B₀ = 1704.69(2) MHz, C₀ = 1468.86(1) MHz and κ = −0.8651(2) are consistent with a τ₁ (O=COC) = 0°, τ₂(COCH) ˜35° structure. This structure can be viewed as a combination of the two conformational species found in ethyl fluoroformate. Two vibrational satellites having rotational constants A₀ = 4963(5) MHz, B₀ = 1694.11(7) MHz. C₀ = 1471.43(4) MHz and A₀=4998(6) MHz, B₀ = 1705.21(7) MHz, C₀ = 1471.10(4) MHz have been assigned.     

Molecular structure of 3-methylthiophene studied by gas electron diffraction combined with microwave spectroscopic data

The molecular structure of 3-methylthiophene has been determined by gas electron diffraction (GED) combined with microwave (MW) spectroscopic data. Ab initio calculations at the HF/3–21G* level were carried out and used as structural constraints in the data analysis. The torsional vibration of the methyl group was treated as a large-amplitude motion. The structural parameters were determined to be: r_{g(S---C2) = 1.719(2) Å}, r_{g(C2=C3) = 1.370(3) Å}, r_{g(C3---C6) = 1.497(6) Å}, r_{g(C2---H) = 1.101(5) Å}, CSC = 91.6(2)°, SC₂C₃ = 113.3(5)°, SC₅C₄ = 111.3(3)°, C₂C₃C₆ = 123.2(11)° and C₃C₆H = 112(2)°. The values of r(S---C₂) - r(S=C₅) and r(C₂=C₃)-r(C₄ =C₅) were fixed at the 3–21G* value of 0.002 Å. Parenthesized values are the estimated limits of error (3σ) referring to the last significant digit.     

Dielectric and elastic properties of a nematic phase induced by charge transfer interaction in a binary system containing disc-shaped molecules

The dielectric constants and the elastic coefficients for splay (K₁) and bend (K₃) of the charge transfer induced nematic (N_c) phase of tridecyl pentakis(phenylethynyl)phenyl ether (1) doped with different amounts of 2,4,7-trinitrofluorenone (2) were determined by studying the electric field induced bend deformation using the capacitance method. A negative dielectric anisotropy was observed. For the bend elastic constant K₃ values up to 22 × 10^-12 N are found which are one order of magnitude higher than the respective values of discotic nematic (N_D) phases. Values of 0·6-0·8 are obtained for the ratio K₁/K₃; these show a minimum for the equimolar complex.     

(2,6-Diphenyl) phenyl methacrylate—2. Radical copolymerization with methyl methacrylate. The Tgs of its copolymers with an addendum on the polymerization of (2,6-diphenyl) phenyl acrylate

The radical copolymerization of (2,6-diphenyl) phenyl methacrylate (1) with methyl methacrylate in DMF with AIBN at 70°C has the reactivity ratios r₁ = 0.071 and r₂ = 1.42, from which Q₁ = 1.45 and e₁ = 1.20. The copolymers had M_ns in the range of 10,000–40,000 and T_gs ranging from 406 to 480 K from which the hypothetical T_g for poly-1 was deduced as 500 K (227°C). Unlike 1, (2,6-diphenyl) phenyl acrylate could be polymerized to oligomers with M_n of the order of 2500.     

Direct kinetic studies of the reactions of 2-butoxy radicals with NO and O2

This Letter reports the first kinetic study of 2-butoxy radicals to employ direct monitoring of the radical. The reactions of 2-butoxy with O₂ and NO are investigated using laser-induced fluorescence (LIF). The Arrhenius expressions for the reactions of 2-butoxy with NO (k₁) and O₂ (k₂) in the temperature range 223–311 K have been determined to be k₁=(7.50±1.69)×10⁻¹²×exp((2.98±0.47) kJmol⁻¹/RT) cm³ molecule⁻¹ s⁻¹ and k₂=(1.33±0.43)×10⁻¹⁵×exp((5.48±0.69) kJmol⁻¹/RT) cm³ molecule⁻¹ s⁻¹. No pressure dependence was found for the rate constants of the reaction of 2-butoxy with NO at 223 K between 50 and 175 Torr.     

Structural and theoretical studies of Xe(OChF5)2 and [XeOChF5][AsF6] (Ch = Se, Te)

The XeOSeF₅⁺ cation has been synthesized for the first time and characterized in solution by ¹⁹F, ⁷⁷Se and ¹²⁹Xe NMR spectroscopy and in the solid state by X-ray crystallography and Raman spectroscopy with AsF₆⁻ as its counter anion. The X-ray crystal structures of the tellurium analogue and of the Xe(OChF₅)₂ derivatives have also been determined: [XeOChF₅][AsF₆] crystallize in tetragonal systems, P4/n, a=6.1356(1) Å, c=13.8232(2) Å, V=520.383(14) Å³, Z=2 and R₁=0.0453 at −60°C (Te) and a=6.1195(7) Å, c=13.0315(2) Å, V=488.01(8) Å³, Z=2 and R₁=0.0730 at −113°C (Se); Xe(OTeF₅)₂ crystallizes in a monoclinic system, P2₁/c, a=10.289(2) Å, b=9.605(2) Å, c=10.478(2) Å, β=106.599(4)°, V=992.3(3) Å³, Z=4 and R₁=0.0680 at −127°C; Xe(OSeF₅)₂ crystallizes in a triclinic system, , a=8.3859(6) Å, c=12.0355(13) Å, V=732.98(11) Å³, Z=3 and R₁=0.0504 at −45°C. The energy minimized geometries and vibrational frequencies of the XeOChF₅⁺ cations and Xe(OChF₅)₂ were calculated using density functional theory, allowing for definitive assignments of their experimental vibrational spectra.     

Auger photoelectron coincidence spectroscopy using synchrontron radiation

The technique of Auger-photoelectron coincidence spectroscopy (APECS) is described and illustrated with a case study of the Cu(100) 3p and M₂₃VV spectra. APECS offers many advantages over the conventional singles spectroscopy such as isolating overlapping spectral features, reducing secondary electron background, and revealing new decay modes. In the coincidence Cu Auger spectra discussed here, the multiplet structure of the quasi-atomic 3d⁸ Auger final state is clearly observed, as well as different intensities for the multiplet components for the p_1/2 and p_3/2 transitions. Furthermore, the spectra reveal evidence for a Coster-Kronig decay channel for 3p_1/2 core holes, and illustrate that the sum of the Auger electron and photoelectron kinetic energies is conserved. Possible technical improvements that can increase the counting efficiency are also discussed.     

Structure and conformation of 2,3,4-triphenyl-1-oxa-4-azabutadiene

2,3,4-triphenyl-1-oxa-4-azabutadine (C20H15NO) has been studied by X-ray analysis and AM1 molecular orbital methods. It crystallises in the triclinic space group P-1 with a=9.414(3), b=10.479(3), c=8.385(2) Å, =103.31(3)°, β=97.10(3)°, γ=74.09(1)°, V=772.5(4) ų, Z=2, D_c=1.227 gcm⁻³, and μ(MoK)=0.075 mm⁻¹ and F₀₀₀=300. The structure was solved by direct methods and refined to R=0.043 for 2672 reflections [I>2σ(I)]. The conformational analysis of the title compound were investigated by semi-empirical quantum mechanical AM1 calculations. The minimum conformation energies were calculated as a function of the three torsion angles θ₁(O(1)C(7)C(8)N(1)), θ₂(C(8)N(1)C(15)C(16)) and θ₃(C(14)C(9)C(8)N(1)). The results are compared with the X-ray results. C=O and C=N groups are twisted about each other by 95.5(2)°.     

Thermal stability of osmium mixed oxides I. CaOsO3 decomposition products: A new orthorhombic phase Ca2Os2O7

The thermal decomposition of CaOsO₃ by differential thermal analyses, thermogravimetry and X-ray powder diffraction has been studied. In nitrogen CaOsO₃ decomposes at 880 ± 10°C into CaO, osmium metal and oxygen due to the reaction CaOsO₃ → CaO + Os + O₂. In static air the decomposition occurs in three stages: 2CaOsO₃ + 1/2O₂ → Ca₂Os₂O₇ (in region 775–808°C), Ca₂Os₂O₇ → Ca₂Os₂O_6,5 + 1/4O₂ (at a temperature interval of 850–1000°C) and in the third stage Ca₂Os₂O_6,5 → 2CaO + OsO₄ ÷ 1/4 O₂ (at 1005 ± 5°C). The first intermediate Ca₂Os₂O₇ is isostructural with orthorhombic Ca₂Nb₂O₇ and its cell parameters are: a₀ = 3.745 Å, b₀ = 25.1 Å, c₀ = 5.492 Å, Z = 4, space group Cmcm or Cmc2. Ca₂Os₂O₇ exhibits metallic conductivity and its electrical resistivity is 4.6 × 10⁻² ohm-cm at 296K.