Determining organic impurities in mother liquors from oxidative terephthalic acid synthesis by microemulsion electrokinetic chromatography

In this study, a microemulsion electrokinetic chromatography (MEEKC) method was developed to analyze and detect several aromatic acids (benzoic acid (BA), isophthalic acid (IPA), terephthalic acid (TPA), p-toluic acid (p-TA), 4-carboxylbenzaldehyde (4-CBA), trimesic acid (TSA), trimellitic acid (TMA), o-phthalic acid (OPA), and hemimellitic acid (HMA)), which are common organic impurities produced by liquid-phase catalytic oxidation of p-xylene to TPA. The effects of microemulsion composition, column temperature, column length and applied voltage were examined in order to optimize the aromatic acid separations. This work demonstrated that variation in the concentration of surfactant (sodium dodecyl sulfate (SDS)) and oil phase (octane) had a pronounced effect on separation of the nine aromatic acids. It was also found that a decrease in column length had the greatest effect on shortening separation time and improving separation resolution for these aromatic acids when compared to that of an increase in column temperature or applied voltage. However, the nature and concentration of cosurfactants and organic modifiers were found to play only minor roles in the separation mechanism. Thus, a separation with baseline resolution was achieved within 14 min by using a microemulsion solution of pH 2.0 containing 3.7% SDS, 0.975% octane, and 5.0% cyclohexanol; and a 50-cm capillary column (effective length of 40-cm) at 26 °C. As a result, the developed MEEKC method successfully determined eight impurities of aromatic acids in the mother liquors produced from the oxidation synthesis of TPA.     

Anion-selective exhaustive injection-sweeping microemulsion electrokinetic chromatography

In this study, anion-selective exhaustive injection-sweeping (ASEI-sweeping) technique, which is a selective on-line sample concentration technique, was first proposed in microemulsion electrokinetic chromatography (MEEKC) for analyses of eight acidic phenolic compounds. In contrast to a capillary that is typically filled with nonmicellar background solution in conventional ASEI-sweeping MEKC method, in the proposed ASEI-sweeping MEEKC method, a capillary is filled with a low pH microemulsion solution (pH 2.0), and then with a short acid plug (pH 2.0, 1.9 cm) before field-amplified sample injection. This proposed design has two functions. First, the microemulsion solution that is present at the front of capillary column is able to avoid phase separation of microemulsion solution during MEEKC separation. Second, the presence of the short acid plug would effectively limit the partition behavior of acid analytes with the oil droplets in the microemulsion during field-amplified sample injection; otherwise, the stacking effect of acid analytes would be markedly reduced. This optimal ASEI-sweeping MEEKC method afforded about 96,000-fold to 238,000-fold increases in detection sensitivity in terms of peak areas without any separation efficiency loss when compared to normal MEEKC separation. Furthermore, trace levels (about 3 ng/g) of gallic acid and catechin in foods were also detected successfully by the proposed ASEI-sweeping MEEKC technique.     

Large volume sample stacking in capillary electrophoresis of weakly acidic compounds using coated capillaries at high pH

Large volume stacking using the electroosmotic flow (EOF) pump (LVSEP) in capillary electrophoresis under a reverse potential is a convenient and straightforward approach for on-line concentration of dilute anionic sample solutions. LVSEP achieves automatic sample matrix removal and subsequent separation without intermediate polarity switching nor complicated instrumental setup. Since anionic analytes should move against the EOF in LVSEP, EOF needs to be suppressed. We extended the range of LVSEP up to pH 11 using various EOF suppression methods, such as dynamic coating by polymer pretreatment and permanent coating. Weakly acidic organic compounds (pK_a<5.2), chlorinated phenols (pK_a=7-9), and aromatic amino acids (pK_a2∼9.3) were concentrated and separated. By hydrodynamically filling the whole capillary of 27 cm long with the sample solution, fast and reliable injection was achieved and sensitivity enhancement factors as large as 170 were readily obtained in less than 8 min.     

Dansylation of aromatic, aliphatic, and medicinal carboxylic acid compounds in 1 M Na2CO3 buffer

Dansyl chloride (DNS-Cl) is a sulfonyl chloride compound which is utilized as a fluorescent probe for quantitative analysis or structural studies of complex molecules. The fluorescent emission was sufficiently strong to permit detection of less than 10 μg of the carboxyl compounds studied here. The dansylation of aromatic carboxyl compounds (i.e. aspirin), aromatic primary amines, and aliphatic carboxyl compounds was accomplished in 1 M Na₂CO₃ buffer at pH 11. The fluorescent labeled analytes were then isolated by thin layer chromatography (TLC) or the aqueous mixture was pre-extracted with proline (or glycine) to eliminate back-ground emission originating from the hydrolized or sulfonic acid form of DNS-Cl. Fluorescent labeled analytes are clearly discerned under ultraviolet light. Limits of detection for dansylated carboxyl compounds was 1-5 μg, however for amines it was approximately 1 μg. Dansylation of aromatic primary amines proceeded much faster (15 min) than that of carboxyl compounds (≥1.5 h) at 25 °C. Despite the aqueous solubility of analytes, which ranged from less than 0.004-5.30 mg/ml, the dansylation of carboxyl compounds was effective. Various organic solvents for extracting derivatives from aqueous mixture were evaluated.     

Determination of nerve agent degradation products by capillary electrophoresis using field-amplified sample stacking injection with the electroosmotic flow pump and contactless conductivity detection

In the present study, field-amplified sample stacking injection using the electroosmotic flow pump (FAEP) was developed for the capillary electrophoretic separation of the four nerve agent degradation products methylphosphonic acid (MPA), ethyl methylphosphonic acid (EMPA), isopropyl methylphosphonic acid (IMPA) and cyclohexyl methylphosphonic acid (CMPA). Coupled to contactless conductivity detection, direct quantification of these non-UV active compounds could be achieved. Sensitivity enhancement of up to 500 to 750-fold could be obtained. The newly established approach was applied to the determination of the analytes in river water and aqueous extracts of soil. Detection limits of 0.5, 0.7, 1.4 and 2.7 ng/mL were obtained for MPA, EMPA, IMPA and CMPA, respectively, in river water and 0.09, 0.14, 0.44 and 0.22 μg/g, respectively, in soil.     

Stacking and separation of urinary porphyrins in capillary electrophoresis: optimization of concentration efficiency and resolution

We demonstrated that anionic porphyrins could be stacked and separated in micellar electrokinetic chromatography (MEKC) and microemulsion electrokinetic chromatography (MEEKC) by applying acetonitrile and high salt content in human urine sample matrix. The introduction of sample containing acetonitrile and sodium chloride into the CE capillary at more than 10% of the total capillary volume resulted in the improvement of peak resolution and the enhancement of detection sensitivity. The achieved acetonitrile stacking enrichment factors of six porphyrins ranged from 12 to 32 in MEKC and from 28 to 33 in MEEKC, respectively. The stacking technique was successfully applied for analyzing porphyrins present in urine samples that were deproteinized with acetonitrile. For the analysis of coproporphyrin isomers, addition of the sodium cholate (SC) into micelle and microemulsion solutions provided adequate resolution. Calibration curves obtained for the determination of coproporphyrin isomers were found linear between 30 and 400 nmol L⁻¹, and the limit of detection (LOD) was 20 nmol L⁻¹ in MEEKC. Intra- and interday precisions (n = 11) in the microemulsion separation system for the isomers at spiked concentrations of 40-400 nmol L⁻¹ in urine were in the range of 0.1-0.4% and 0.7-7.6% for migration time and peak area, respectively. Coproporphyrin III, coproporphyrin I and uroporphyrin were detected at levels of 80.7 nmol L⁻¹, 32.3 nmol L⁻¹ and 19.8 nmol L⁻¹, respectively, in the urine samples collected from healthy individuals. Different porphyrin profiles, however, were observed in urine samples from porphyria cutanea tarda (PCT) patients.     

On-column liquid–liquid–liquid microextraction coupled with base stacking as a dual preconcentration method for capillary zone electrophoresis

A simple and efficient dual preconcentration method of on-column liquid–liquid–liquid microextraction (LLLME) coupled with base stacking was developed for capillary zone electrophoresis (CZE) in this paper. Four N-methyl carbamates were used as target compounds to evaluate the enrichment means. The carbamates in sample solutions (donor phase) were extracted into a dodecanol phase immobilized on a porous hollow fiber, hydrolyzed and back extracted into 0.20 μL running buffer (acceptor phase) of 30 mmol/L methylamine hydrochloride (pH 11.6) containing 0.5 mmol/L tetradecyltrimethylammonium bromide inside the hollow fiber, stacked further with 0.5 mol/L NaOH injected at −10 kV for 60 s, and separated by CZE. Analytical parameters affecting the LLLME, base stacking and CZE were investigated, including sample solution volume, pH and temperature, extraction time, stirring rate, buffer component, buffer pH, NaOH concentration, stacking time, etc. The enrichment factors of the carbamates were higher than 1100. The relative standard deviation (RSD) of peak height and limits of detection (LODs) were 4.5–5.5% (n = 6) and 2–4 ng/mL (S/N = 3) for standard solutions, respectively. The proposed method was applied to the analysis of vegetable and fruit samples with the RSD less than 6.0% (n = 3) and LODs of 6–10 ng/g (S/N = 3). The calibration solutions were prepared by diluting the stock solutions with blank sample solutions, and the calibration concentrations ranged from 0.012 to 1.0 μg/mL (r > 0.9951). The analytical results demonstrated that the LLLME coupled with base stacking was a simple, convenient and reliable on-column sample pretreatment method for the analysis of anionic analytes in CZE.     

Micelle to trapping solution stacking in micellar electrokinetic chromatography

An analytical strategy micelle to trapping solution stacking (MSS) was developed in acidic buffer in micellar electrokinetic chromatography (MEKC). The stacking mechanism is based on the transport, release, capturing of molecules bound to micelle carriers that are made to collapse into trapping solution (TS) to serve as the medium to contain and stacking the analytes. Tetrandrine and fangchinoline were selected as model mixture using sodium dodecyl sulfate (SDS) micelles as carrier to demonstrate this stacking method. The experiments by MSS-MEKC were carried out and further compared with those by normal MEKC. The results reveal that 113–123-fold improvements in the detection sensitivity was obtained for the analytes, and separation and determination of tetrandrine and fangchinoline in Stephaniae tetrandrae S. Moore and Fengtongan capsules were finished under optimum conditions using the sample matrix containing 8.0 mM SDS and TS containing 50 mM H₃PO₄–55% (v/v) ethanol.     

Highly efficient microextraction of chlorophenoxy acid herbicides in natural waters using a decanoic acid-based nanostructured solvent prior to their quantitation by liquid chromatography–mass spectrometry

Solvents used in microextraction require high solubilising capability to efficiently extract the target compounds. In this article, nanostructured solvents made up of alkyl carboxylic acids (ACAs) aggregate are proposed for the efficient microextraction of acidic pesticides from natural waters. The target compounds were chlorophenoxy acid herbicides (CPAHs) widely used in agriculture, forestry and gardening (viz. 2,4-D, MCPA, MCPP, 2,4,5-T and MCPB). The supramolecular solvents (SUPRASs) tested were generated from solutions of reverse micelles of octanoic (OcA), decanoic (DeA) and dodecanoic (DoA) acid in THF by the addition of water, which acted as the coacervating agent. The DeA-based SUPRAS was the most efficient extractant for CPAHs; actual concentration factors (ACFs) of 260 for 2,4-D, 290 for MCPA, and 400 for MCPP, 2,4,5-T and MCPB were obtained. The explanation for so high ACFs can be found in the extremely efficient retention mechanisms that the DeA-based SUPRAS provides for CPAHs (i.e. formation of hydrogen bonds and hydrophobic interactions), and the high number of binding sites that it contains (i.e. the concentration of biosurfactant in the SUPRAS was 0.56 mg μL⁻¹). Both characteristics permitted to effectively extract the target analytes in a low volume of solvent (about 2 μL of solvent per mL of sample). Others assets of the proposed supramolecular solvent-based microextraction (SUSME) approach included recoveries no dependent on matrix composition, rapidity (sample treatment spent about 15 min), use of low volume of sample (63 mL per analysis) and simplicity (no special lab equipments was needed). Combination with liquid chromatography/ion–trap mass spectrometry [LC–(IT)MS] afforded method quantitation limits for CPAHs within the interval 22–30 ng L⁻¹. The precision of the method, expressed as relative standard deviation (n = 11, [CPAH] = 200 ng L⁻¹), was in the range 2.9–5.8%. The applicability of the method to the analysis of natural waters was assessed by determining the target analytes in fortified river and underground water samples.     

The influence of organic sample solvents on the separation efficiency of basic compounds under strong cation exchange mode

This study investigated the influence of organic sample solvents on separation efficiency of basic compounds under strong cation exchange (SCX) mode. The mixtures of acidic aqueous solution and organic solvent such as acetonitrile, ethanol, methanol and dimethyl sulfoxide (DMSO) were tested as sample solvents. For later-eluting analytes, the increase of sample solvent elution strength was responsible for the decrease of separation efficiency. Thus, sample solvents with weak elution strength could provide high separation efficiencies. For earlier-eluting analytes, the retention of organic sample solvents was the main factor affecting separation efficiency. Weakly retained solvents could provide high separation efficiency. In addition, an optimized approach was proposed to reduce the effect of organic sample solvent, in which low ionic solvent was employed as initial mobile phase in the gradient. At last, the analysis of impurities in hydrophobic drug berberine was performed. The results showed that using acidic aqueous methanol as sample solvents could provide high separation efficiency and good resolution (R > 1.5).     

Strategies for Analyzing Cephalosporins by Microemulsion Electrokinetic Chromatography

We studied microemulsion electrokinetic chromatography (MEEKC) for the analysis of cefazolin, cefoperazone and cephalexin. We compared the separation of the cephalosporins obtained by MEEKC at a high pH and at a low pH. Good separations of the compounds were achieved within 9 min by both methods. To reduce the analysis time, we used the "short-end" injection technique. We also present two on-line preconcentrations of the analytes by sample stacking, reversed electrode polarity stacking mode (REPSM) (at high-pH) and stacking with reverse migrating pseudostationary phase (SRMP) (at low-pH). We also report parameters for validation such as linearity and limit of detection. Our results show that the developed methods are suitable for analyzing these three cephalosporins.     

On-line sample stacking of peptides in capillary electrophoresis for the study of prebiotic reactions between α,α-dialkylated amino acids and amino acid N-carboxyanhydrides

The reaction between α,α-dialkylated amino acids and amino acid N-carboxyanhydrides is slow leading to low concentrations of products (peptides). The detection by capillary electrophoresis of the analytes contained in such samples is therefore a challenging issue. In this work, on-line sample pre-concentration methods based on field-amplified sample stacking have been implemented and compared. Because of the high ionic strength present in the sample matrix, samples were diluted with an organic solvent prior to analysis to decrease the sample conductivity. Different modes of sample injection (field amplified sample injection (FASI), hydrodynamic normal sample stacking (NSS) or large volume sample stacking (LVSS)) were compared. Pre-concentration factors of 20 for FASI, about 30–40 for NSS and 60 for LVSS were obtained for the analysis of (l,l) dipeptide of valine in a large excess of isovaline and 0.2 M of ionic strength. For LVSS application and resolution optimisation, a new non-covalent coating based on the partial modification of the capillary surface was used to tune the electroosmotic flow magnitude and to pump the sample matrix out of the capillary. This on-line sample pre-concentration step allowed confirming that oligopeptides including α,α-dialkylated amino acids are formed during the reaction between α,α-dialkylated amino acids and N-carboxyanhydride amino acids.     

Multi-walled carbon nanotube as a solid phase extraction adsorbent for analysis of indole-3-butyric acid and 1-naphthylacetic acid in plant samples

In this work,a new sample pretreatment method prior to HPLC separations was developed for the determination of auxins in plant samples.Owing to its large surface area and high adsorption capacity, multi-walled carbon nanotube(MWCNT) was chosen as the adsorbent for the extraction of auxins from plant samples.In this study,two important auxins were selected as model analytes,namely indole-3-butyric acid(IRA) and 1-naphthylacetic acid(NAA).They could be extracted and concentrated due to theirπ-πstacking interactions with MWCNT.Then HPLC-UV was introduced to detect IBA and NAA after sample pretreatment.Factors that may affect the enrichment efficiency were investigated and optimized.Comparative studies showed that MWCNT was superior to C18 for the extraction of the two analytes.Validation experiments showed that the optimized method had good linearity(0.9998 and 0.9960),high recovery(81.4%-85.4%),and low detection limits(0.0030 mg/L and 0.0012 mg/L).The results indicated that the novel method had advantages of convenience,good sensitivity,high efficiency, and it was feasible for the determination of auxins in plant samples.     

毛细管电泳-场强放大样品堆积法检测染发剂中的7种苯胺类物质

建立了毛细管电泳-场强放大样品堆积测定染发剂中4,4′-二氨基二苯甲烷、苯胺、邻甲氧基苯胺、对氨基苯甲醚、3,4-二甲基苯胺、间氨基苯酚、1-萘胺7种苯胺类物质的分析方法。在优化的缓冲溶液体系(0.15 mol/L NaH2PO4,0.015 mol/L 三乙醇胺, pH 2.3)下7种分析物在6.5 min内实现基线分离。考察了样品中添加的磷酸浓度和乙腈浓度、水柱长度、电动进样时间与电压对场强放大富集效率及重现性的影响。最佳的富集条件为: 水柱注入3.45 kPa(0.5 psi)×6 s,样品中添加40%(v/v)乙腈和0.6×10~3mol/L磷酸,进样电压与进样时间为10 kV×10 s。线性范围为3～1000 μg/L(R2＞0.996),检出限为0.26～2.75 μg/L,将已有方法的检测灵敏度提高了1～3个数量级。在2种市售黑色染发剂中均检测到间氨基苯酚,含量分别为7.32 mg/g和1.34 mg/g。平均加标回收率为74%～108%。该方法灵敏度高、快速、重现性好、成本低,可供多种样品基质中痕量苯胺类污染物及其他阳离子物质的测定借鉴使用。     

Novel, selective sample stacking microemulsion electrokinetic capillary chromatography induced by reverse migrating pseudostationary phase for the determination of the new ultra-short acting hypnotic “HIE-124” in mice serum

Microemulsion electrokinetic capillary chromatography (MEEKC) with sample stacking induced by reverse migrating pseudostationary phase (SRMP) technique in a suppressed electro-osmotic flow (EOF) strategy was investigated for analysing the new ultra-short hypnotic HIE-124 in mice serum. The proposed method utilized fused-silica capillary with a total length of 50 cm (effective length 40 cm), applied voltages for stacking and separation were 5.0 kV for 4.30 min and subsequently 25 kV, respectively, with a sample injection of 0.5 psi for 90 s. All the runs were carried out at 25 °C and detected at 213 nm. The optimum microemulsion background electrolyte (BGE) solution consisted of 0.8% (v/v) ethyl acetate, 6.6% (v/v) butan-2-ol, 1.0% (v/v) acetonitrile, 2.0% (w/v) sodium dodecyl sulfate (SDS), and 89.6 mL with 25 mM phosphate buffer pH 8. When this preconcentration technique was used, the sample stacking and the separation processes took place successively with changing the voltage with an intermediate polarity switching step. The proposed method was validated carefully with respect to high specificity of the method, good linearity (r = 0.9994), fair wide linear concentration range (66-1500 ng mL⁻¹), limit of detection and quantitation were 21.6 and 65.5 ng mL⁻¹, respectively. The mean relative standard deviation (RSD) of the results of intra- and inter-day precision and accuracy were less than 6.0%, and overall recovery higher than 95% of HIE-124 in mice serum. The developed method could be used for the trace analyses of HIE-124 in serum and was finally used for the pharmacokinetic study investigation of HIE-124 in mice serum.     

Large-Volume Sample Stacking with Polarity Switching in CE for Determination of Natural Polyphenols in Plant Extracts

A simple on-column preconcentration method for capillary electrophoretic determination of eight polyphenolic compounds (carnosic acid, cinnamic acid, caffeic acid and rosmarinic acid, quercetin, apigenin, luteolin and rutin) was devised. The method was applied for the assay of polyphenols in methanolic extract of the medicinal plant Orthosiphon Stamineus Benth. The analysis was carried out in fused silica capillaries (I.D. 50 μm, effective length 50 cm, total length 60 cm) with UV detection at 200 nm. The background electrolyte was 50 mM sodium tetraborate of pH 9.0 (adjusted with phosphoric acid). Large volume sample stacking with polarity switching was used for sensitivity enhancement. With sample injection representing 50% of capillary volume and polarity switching at 1.6 min, an average 90-fold enhancement of absorbance signal of the analytes was achieved. The calibration curves were linear (r = 0.9956–0.9994) in the range 0.2 to 1.8 μg mL^?1 of an analyte. The repeatability of migration times and peak areas was characterized by RSD values 0.11–0.57 and 1.63–5.66%, respectively. The proposed method offers favourable limits of detection (9–16 ng mL^?1) that compare well with those of LC.     

The microemulsion electrokinetic capillary chromatography combined with reversed‐electrode polarity stacking mode for enriching and quantifying lignanoids and ginsenosides in TCMs preparation Shengmai injection

An on‐line large volume sample stacking with polarity switching (LVSS) method was proposed for simultaneously determining lignanoids and ginsenosides in MEEKC. The parameters including the pH value and concentration of buffer solution, SDS, organic modifier, oil phase, running voltage, and temperature as well as injection time, sample matrix, stacking voltage, and time influencing separation and stacking were systematically optimized. The method was verified by performing precision, accuracy, stability, and recovery. Its reliability was proved by separating and quantifying two lignanoids and three ginsenosides in Shengmai injectionSMI. The sensitivity of these compounds was improved by MEEKC‐LVSS method for 6–11 times than conventional MEEKC. Thus, this developed on‐line MEEKC‐LVSS method was sensitive, practical, and reliable.     

Comparison of microemulsion electrokinetic chromatography and solvent modified micellar electrokinetic chromatography on rapid separation of heroin, amphetamine and their basic impurities

Microemulsion electrokinetic chromatography (MEEKC) and solvent modified micellar electrokinetic chromatography (MEKC) were investigated with the goal of the rapid separation of complex heroin and amphetamine samples. The rapid simultaneous separation of 17 species of heroin, amphetamine and their basic impurities and adulterants was performed within about 10 min using MEEKC for the first time, whereas solvent modified MEKCs were unable to resolve all the components. The comparisons between MEEKC and solvent modified MEKC proved internal lipophilic organic phase in microemulsions played an important role in improving the separation performance with respect to efficiency. However, the role of internal lipophilic organic phase in MEEKC was disgusted at high concentrations of cosurfactant, and the separations of MEEKC and 1-butanol modified MEKC became similar at high concentrations of 1-butanol. The evaluation of reproducibility, linearity and detection limit of optimized MEEKC method provided good results for all the analytes investigated, thus allowing its application to real controlled drug preparation analysis.     

On-line concentration and separation of indolamines, catecholamines, and metanephrines in capillary electrophoresis using high concentration of poly(diallyldimethylammonium chloride)

This paper tackles a simple and efficient method for the simultaneous separation and stacking of neurotransmitters in capillary electrophoresis with UV detection. By using poly(diallyldimethylammonium chloride) (PDDAC) as a buffer additive, the high and reversed EOF are observed. Moreover, the mobility of indolamines and catecholamines decreases as the PDDAC concentration increases. Based on the difference in mobility in the presence and absence of PDDAC, the analytes were simply stacked between the boundary of the sample zone and the background electrolyte containing PDDAC. The separation of 14 analytes including indolamines, catecholamines, and metanephrines was accomplished within 33 min under optimal conditions (1.2% PDDAC and 5 mM formic acid at pH 4.0), and the values of relative standard deviation of their migration time were less than 3.1%. By applying stacking methods for fourteen analytes, we observed: (a) the sample injection volume of sample is up to 216 nL, (b) the limits of detection at signal-to-noise of 3 range from 15.4 to 122.1 nM, and (c) the sensitivity enhancements, compared to normal injection (12 nL), range from 110- to 220-fold. Under the optimal stacking conditions, the present method has been applied to analyze of vanillomandelic acid, 5-hydroxyindole-3-acetic acid, dopamine, tryptamine, and 3-indoxyl sulfate in urine samples.     

Simultaneous analysis of neutral and acidic pharmaceuticals as well as related compounds by gas chromatography-tandem mass spectrometry in wastewater

This work presents a new multi-residue analytical method based on solid phase extraction (SPE) with Oasis HLB sorbent, followed by gas chromatography tandem mass spectrometry (GC-MS/MS) for the simultaneous determination of a group of 10 acidic and neutral pharmaceuticals and related compounds in wastewaters. The typical derivation step was avoided, allowing the determination of acidic and neutral pollutants in a single analysis as well as providing a fast and easy method suitable for routine monitoring. Target pollutants include: anti-inflammatory drugs (ibuprofen, acetaminophen and diclofenac); an antiepileptic agent (carbamazepine); stimulants (caffeine and nicotine); an antiseptic (triclosan); a plasticizer (bisphenol A) and two of their more relevant metabolites (2,8-dichlorodibenzo-p-dioxin and 1,7-dimethylxanthine). Recoveries between 66 and 112% were achieved for all the target compounds (except for 2,8-dichlorodibenzo-p-dioxin). Good linearity was observed within the studied ranges (R² > 0.993). Acceptable intra and inter-day precision was obtained, with relative standard deviation between 2 and 18%. The application of the optimized MS/MS mode allowed method detection limits in the range of 0.2-16 ng/L, with the exception of ibuprofen (120 ng/L). Finally, the methodology was successfully applied to the analysis of hospital effluent samples. All target analytes were detected at concentrations between 1 ng/L and 83215 μg/L. Even in the absence of derivatization, all the analytes showed good peak shape, except acetaminophen, which exhibited peak tailing. However, the method proved to be repetitive and reproducible, and the peak shape did not represent a problem for the reliable quantification of this compound. For most of the analytes studied, the detection limits achieved compare well against values reported in previously published methods.