Electrocatalysis and Amperometric Detection of the Reduced Form of Nicotinamide Adenine Dinucleotide at Toluidine Blue/Zinc Oxide Coated Electrodes

Thin toluidine blue (TBO) and zinc oxide (ZnO) hybrid films have been grown on glassy carbon electrode (GCE) and indium tin oxide coated (SnO₂) glass electrodes by using cyclic voltammetry (CV). Scanning electron microscopy (SEM) images revealed spherical and beads‐like shape of highly oriented TBO/ZnO hybrid films. Energy dispersive spectrometry (EDS) results declared that the films composed mainly of Zn and O. Moreover, TBO/ZnO hybrid films modified electrode is electrochemically active, dye molecules were not easily leached out from the ZnO matrix and the hybrid films can be considered for potential applications as sensor for amperometric determination of reduced nicotinamide adenine dinucleotide (NADH) at 0.0 V. A linear correlation between electrocatalytic current and NADH concentration was found to be in the range between 25 μM and 100 μM in phosphate buffer. In addition, we observed that dopamine, ascorbic acid and uric acid are not interference in amperometric detection of NADH in this proposed method. In addition, TBO/ZnO hybrid film modified electrode was highly stable and its response to the NADH also remained relentless.     

Synthesis of Carbon Nanofibers for Mediatorless Sensitive Detection of NADH

Highly sensitive amperometric detection of dihydronicotinamide adenine dinucleotide (NADH) by using novel synthesized carbon nanofibers (CNFs) without addition of any mediator has been proposed. The CNFs were prepared by combination of electrospinning technique with thermal treatment method and were applied without any oxidation pretreatment to construct the electrochemical sensor. In amperometric detection of NADH, a linear range up to 11.45 μM with a low detection limit of 20 nM was obtained with the CNF‐modified carbon paste electrode (CNF‐CPE). Good selectivity was exhibited for the simultaneous detection of NADH and its common interferent of ascorbic acid (AA) by differential pulse voltammogram. The attractive electrochemical performance and the versatile preparation process of the CNF‐CPE made it a promising candidate for designing effective NADH sensor.     

Amperometric Detection of Morphine at Preheated Glassy Carbon Electrode Modified with Multiwall Carbon Nanotubes

A highly sensitive and fast responding sensor for the determination of morphine is described. The multiwall carbon nanotubes immobilize on preheated glassy carbon electrode (5 min at 50 °C) by gently rubbing of electrode surface on a filter paper supporting the carbon nanotubes.The results indicated that carbon nanotubes(CNTs) modified glassy carbon electrode exhibited efficiently electrocatalytic oxidation for morphine with relatively high sensitivity, stability and long life. Under conditions of cyclic voltammetry, the potential for oxidation of morphine is lowered by approximately 100 mV and the current is enhanced significantly (10 times) in comparison to the bare glassy carbon electrode at wide pH range (2–9). The electrocatalytic behavior is further exploited as a sensitive detection scheme for morphine determination by hydrodynamic amperometry. Under the optimized conditions the calibration plots are linear in the concentration range 0.5–150 μM with the calculated detection limit (S/N=3) of 0.2 μM and sensitivity of 10 nA/μM and a relative standard deviation (RSD) of 2.5% (n=10). The amperometric response is extremely stable, with no loss in sensitivity over a continual 30 min operation. Such attractive ability of multiwall carbon nanotubes (MWCNTs) modified GC electrode, suggests great promise for a morphine amperometric sensor. Finally the ability of the modified electrode was evaluated for simultaneous determination of morphine and codeine.     

NADH Electrocatalytic Oxidation on Gold Nanoparticle‐Modified PVC/TTF‐TCNQ Composite Electrode. Application as Amperometric Sensor

We herein report on the electrocatalytic activity towards the oxidation of NADH of a PVC/TTF‐TCNQ composite electrode modified with gold nanoparticles. This electrocatalytic property allows proposing this system as a new alternative for amperometric determination of NADH, without need to add another mediator. The sensor shows a linear response to NADH over a concentration range from 5.0×10^?6 M up to 5.0×10^?4 M, with a sensitivity of 11.22±0.5 mA M^?1 and a detection limit (S/N=3) of 4.0×10^?6 M for measurements in batch and similar data in FIA.     

Chitosan Incorporating Cetyltrimethylammonium Bromide Modified Glassy Carbon Electrode for Simultaneous Determination of Ascorbic Acid and Dopamine

Simultaneous determination of a neurotransmitter, dopamine (DA), and ascorbic acid (AA) is achieved at neutral pH on a chitosan incorporating cetyltrimethylammonium bromide (CTAB) modified glassy carbon (GC) electrode. Differential pulse voltammetry (DPV) technique was used to investigate the electrochemical response of DA and AA at a glassy carbon electrode modified with chitosan incorporating CTAB. An optimum 6.0 mmol L^?1 of CTAB together with 0.5 wt% of chitosan was used to improve the resolution and the determination sensitivity. In 0.1 mol L^?1 aqueous phosphate buffer solution of pH 6.8, the chitosan‐CTAB modified electrode showed a good electrocatalytic response towards DA and AA. The anodic peak potential of DA shifted positively, while that of AA shifted negatively. Thus, the difference of the anodic peaks of DA and AA reached 0.23 V, which was enough to separate the two anodic peaks very well. The presented method herein could be applied to the direct simultaneous determination of DA and AA without prior treatment. The anodic peak currents (I_pa) of DPV are proportional to DA in the concentration range of 8 μM to 1000 μM, to that of AA 10 μM to 2000 μM, with correlation coefficients of 0.9930 and 0.9945, respectively. The linear range is much wider than previously reported.     

Ordered Mesoporous Carbon Functionalized with Polythionine for Electrocatalytic Application

A polythionine (PTH) functionalized ordered mesoporous carbon (OMC) material (PTH/OMC) was presented. The electrochemistry kinetic characteristics of this material are investigated and compared with pure OMC. The results showed that compared with OMC, PTH/OMC possesses a much higher electron transfer rate. For the application of this material, an electrocatalytic based NADH biosensor was constructed on glassy carbon electrode (GCE). Instead of 0.592 V on bare GCE and 0.206 V on OMC/GCE, the amperometric detection of NADH could be effectively performed on the present biosensor with operation potential be set at 0.0 V. In addition, the sensor showed good reproducibility and stability.     

Amperometric determination of lactate dehydrogenase based on a carbon fiber microcylinder electrode modified covalently with Toluidine Blue O by acylation

A method has been developed for the modification of a carbon fiber microcylinder electrode with acylation. The stability and surface coverage of the Toluidine Blue O-modified microelectrode were studied by cyclic voltammetry. The modified electrode showed significant activity for the electrocatalytic oxidation of NADH in pH 6.8-7.8 solution. The catalytic current increased linearly with increasing concentration of NADH from 4.0 x 10(-5) to 1.5 x 10(-3) M. A simple amperometric determination based on electrochemical detection of NADH produced from the enzymatic reaction of lactate with NAD(+) under the catalysic effect of lactate dehydrogenase (LDH) is reported. The experimental factors which had primary influence on the analytical performance were studied. The sensor had a linear response over a range of LDH concentrations from 5.0 U l(-1) to 200 U l(-1) at -0.2 V vs. SCE under optimum conditions. A satisfactory result was obtained for the determination of LDH in clinical blood samples.     

Detection of NADH and Ethanol at Titanium Containing MCM‐41 with Low Overpotential

Titanium‐containing MCM‐41 (Ti‐MCM‐41) modified glassy carbon electrode (GCE) can exhibit an excellent electrocatalytic activity towards the oxidation of β‐Nicotinamide adenine dinucleotide (NADH). A dramatic decrease in the overvoltage of NADH oxidation reaction is observed at 0.28 V vs. SCE. The application in the amperometric biosensing of ethanol using alcohol dehydrogenase enzyme (ADH) also has been demonstrated with this material. The proposed sensor shows a highly sensitivity, an acceptable reproducibility and a good stability. The linear range of ethanol is 25–1000 μM and the detection limit is 8.0 μM. Ti‐MCM‐41 modified electrode not only can be used to detect the concentration of NADH in biochemical reaction, but also as the potential matrix for the construction of dehydrogenases sensor.     

Amperometric hydrogen peroxide biosensor based on the immobilization of horseradish peroxidase by carbon-coated iron nanoparticles in combination with chitosan and cross-linking of glutaraldehyde

Magnetic carbon-coated iron nanoparticles were used to immobilize horseradish peroxidase on the surface of a polythionine modified glassy carbon electrode in combination with chitosan and cross-linking of glutaraldehyde. The electrochemical character of this enzyme electrode and its electrocatalytic reduction to H₂O₂ were studied by cyclic voltammetry. The effects of the common experimental variables were investigated. Under the optimum conditions, this method could be successfully used for the amperometric determination of H₂O₂ in a wide concentration range of 9.6 μM to 3.16 mM with a detection limit of 3.6 μM (S/N=3). Besides, the biosensor also exhibited good selectivity, stability and reproducibility.

     

Amperometric sensor for ascorbic acid based on a glassy carbon electrode modified with gold-silver bimetallic nanotubes in a chitosan matrix

We report on an amperometric sensor for ascorbic acid (AA) that is based on highly dense gold-silver nanotubes in a chitosan film on a glassy carbon electrode. The nanotubes were synthesized by a poly(vinyl pyrrolidone)-mediated polyol method employing a replacement reaction with silver nanowires as templates, and were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction. Under the optimal conditions, the sensor exhibits good electrocatalytic activity towards the oxidation of AA, and this enables the determination of AA in the 5 μM to 2 mM concentration range, with a detection limit at 2 μM (at an S/N of 3). The response time is 2 s. The sensor displays good reproducibility, selectivity, sensitivity, and long-term stability.

Electrocatalytic oxidation of NADH based on polyluminol and functionalized multi-walled carbon nanotubes

This work presents that the electrocatalytic oxidation of NADH can be enhanced by the hybrid composites of polyluminol and functionalized multi-walled carbon nanotubes (MWCNTs). The hybrid composites can be easily prepared by the electropolymerization of luminol and the adsorption of functionalized MWCNTs. The modified electrode exhibits two redox couples which can show two electrocatalytic peaks at about 0.1 and 0.3 V (vs. Ag/AgCl) to NADH oxidation. The kinetic constant, k(kin), for the electrocatalytic oxidation of NADH, evaluated by chronoamperometry and voltammetry using a rotating disk electrode (RDE), provided values close to 10(5) M(-1) s(-1). At an applied potential of 0.1 V, the sensor provides a linear response range for NADH from 5 × 10(-6) up to 1.5 × 10(-4) M with a sensitivity of 183.9 μA mM(-1) cm(-2), and detection and quantification limits of 0.6 and 5 μM (S/N = 3), respectively.     

Simultaneous Determination of Ranitidine and Metronidazole at Glassy Carbon Electrode Modified with Single Wall Carbon Nanotubes

Single‐walled carbon nanotubes(SWCNTs) were dispersed into DMSO, and a SWCNTs‐film coated glassy carbon electrode was achieved via evaporating the solvent. The results indicated that CNT modified glassy carbon electrode exhibited efficiently electrocatalytic reduction for ranitidine and metronidazole with relatively high sensitivity, stability and life time. Under conditions of cyclic voltammetry, the potential for reduction of selected analytes is lowered by approximately 150 mV and current is enhanced significantly (7 times) in comparison to the bare glassy carbon electrode. The electrocatalytic behavior is further exploited as a sensitive detection scheme for these analytes determinations by hydrodynamic amperometry. Under optimized condition in amperometric method the concentration calibration range, detection limit and sensitivity were about, 0.1–200 μM, detection limit (S/N=3) 6.3×10^?8 mol L^?1 and sensitivity 40 nA/μM for metronidazole and 0.3–270 μM 7.73×10^?8 mol L^?1 and 25 nA/μM for ranitidine. In addition, the ability of the modified electrode for simultaneous determination of ranitidine and metronidazole was evaluated. The proposed method was successfully applied to ranitidine and metronidazole determination in tablets. The analytical performance of this sensor has been evaluated for detection of these analytes in serum as a real sample.     

Amperometric Biosensor for Hydrogen Peroxide,Using Supramolecularly Immobilized Horseradish Peroxidase on the β‐Cyclodextrin‐Coated Gold Electrode

Horseradish peroxidase, previously modified with 1‐adamantane moieties, was supramolecularly immobilized on gold electrodes coated with perthiolated β‐cyclodextrin. The functionalized electrode was employed for the construction of an amperometric biosensor device for hydrogen peroxide using 1 mM hydroquinone as electrochemical mediator. The biosensor exhibited a fast amperometric response (6 s) and a good linear response toward H₂O₂ concentration between 12 μM and 450 μM. The biosensor showed a sensitivity of 1.02 mA/M cm², and a very low detection limit of 5 μM. The electrode retained 97% of its initial electrocatalytic activity after 30 days of storage at 4 ⁰C in 50 mM sodium phosphate buffer, pH 7.0.     

Fabrication of Chitosan‐Multiwall Carbon Nanotube Nanocomposite Containing Ferri/Ferrocyanide: Application for Simultaneous Detection of D‐Penicillamine and Tryptophan

We report a simple and effective strategy for fabrication of the nanocomposite containing chitosan (CS) and multiwall carbon nanotube (MWNT) coated on a glassy carbon electrode (GCE). The characterization of the modified electrode (CS‐MWNT/GC) was carried out using scanning electron microscopy (SEM) and UV–vis absorption spectroscopy. The electrochemical behavior of CS‐MWNT/GC electrode was investigated and compared with the electrochemical behavior of chitosan modified GC (CS/GC), multiwalled carbon nanotube modified GC (MWNT/GC) and unmodified GC using cyclic voltammetry (CV) and electron impedance spectroscopy (EIS). The chitosan films are electrochemically inactive; similar background charging currents are observed at bare GC. The chitosan films are permeable to anionic Fe(CN)₆^3?/4? (FC) redox couple. Electrochemical parameters, including apparent diffusion coefficient for the Fe(CN)₆^3?/4? redox probe at FC/CS‐MWNT/GC electrode is comparable to values reported for cast chitosan films. This modified electrode also showed electrocatalytic effect for the simultaneous determination of D‐penicillamine (D‐PA) and tryptophan (Trp). The detection limit of 0.9 μM and 4.0 μM for D‐PA and Trp, respectively, makes this nanocomposite very suitable for determination of them with good sensitivity.     

Sensitive and selective electrochemical detection of carbon monoxide in saline at a Pt-Ru/Nafion/MnO2-modified electrode

We fabricated a sensitive and selective electrochemical carbon monoxide (CO) sensor for physiological conditions based on the Pt-Ru system. At a bare Pt-Ru electrode, a linear amperometric response to CO concentration was obtained in the range of 0.9-9 μM. However, significant current response to model electroactive interferents for physiological conditions, uric acid (UA), ascorbic acid (AA) and hydrogen peroxide (HP), was also recorded at the Pt-Ru electrode. The response to UA and AA was highly suppressed by coating the Pt-Ru electrode surface with a Nafion layer, and the response to HP was almost completely eliminated by the additional coating with a MnO(2)/chitosan layer. Finally, at the Pt-Ru/Nafion/MnO(2) electrode, amperometric CO detection with a sensitivity of 173 nA cm(-2) μM(-1) was obtained in the concentration range of 0.9-9 μM with the UA, AA and HP signal being below 1.7% at the same concentration of CO.     

A sensitive amperometric hydrogen peroxide sensor based on thionin/EDTA/carbon nanotubes—chitosan composite film modified electrode

A sensitive amperometric sensor has been constructed for the determination of hydrogen peroxide (HP). It is based on a glassy carbon electrode modified with a composite made from thionin, EDTA, multiwalled carbon nanotubes, and chitosan. Thionin was covalently immobilized on the surface of the electrode. The sensor exhibits a powerful electrocatalytic activity for the reduction of HP. The amperometric signal is proportional to the concentration of HP in the range from 0.2 μM to 85.0 μM, with a detection limit of 0.065 μM. The sensor displays excellent selectivity, good reproducibility and long-term stability.     

N-Doped Carbon Coated TiC Nanofiber Arrays on Ti-6Al-4V for Sensitive Electrochemical Determination of Cr(VI)

A sensitive electrochemical sensor for Cr(VI) detection based on N-doped carbon coated TiC nanofiber arrays (TiC@CNx NFAs) is reported. The abundant electrocatalytic active sites contained CNx shell, highly conducting TiC core, and good electrical contact between the TiC@CNx and underlying Ti alloy endow this electrode with the excellent electrochemical sensing properties. The developed electrochemical sensor shows remarkable determination activity towards Cr(VI) with a high sensitivity of 0.88 μA μM⁻¹ cm⁻², a low detection limit of 4.0 nM (S/N=3), a wide linear range from 0.2 to 24.1 μM, good selectivity and anti-interference property.     

In situ Electroreduction of Graphene Oxide: Increased Sensitivity for the Determination of NADH

A novel and useful method to catalyze the electro‐oxidation of nicotinamide adenine dinucleotide (NADH) over a glassy carbon electrode (GCE) modified with graphene oxide (GO) is presented. Based on the presence of oxygen moieties in GO, which can be easily reduced, an in situ electrochemical generation of reduced graphene oxide (denoted as erGO) applying a sufficient negative potential. A potential of ?1.000 V was selected to generate the erGO/GCE as a pretreatment potential before the detection of NADH. The in situ generated erGO/GCE system produces a decrease in the overpotential of NADH oxidation from +0.720 V to +0.230 V compared with GCE. The process also produced an important increase in current signals. The modified electrode was characterized by scanning electron (SEM) and electrochemical microscopies (SECM), cyclic voltammetry and by Raman spectroscopy. Amperometric detection of NADH via this straightforward electrocatalytic method provides a wide linear range between 10 and 100 μM, a lower detection limit of 0.36 μM and an excellent sensitivity of (1.47±0.09) μA mM^?1.     

Direct Electrochemistry of Hemoglobin Immobilized on Carbon‐Coated Iron Nanoparticles for Amperometric Detection of Hydrogen Peroxide

A novel method for preparation of hydrogen peroxide biosensor was presented based on immobilization of hemoglobin (Hb) on carbon‐coated iron nanoparticles (CIN). CIN was firstly dispersed in a chitosan solution and cast onto a glassy carbon electrode to form a CIN/chitosan composite film modified electrode. Hb was then immobilized onto the composite film with the cross‐linking of glutaraldehyde. The immobilized Hb displayed a pair of stable and quasireversible redox peaks and excellent electrocatalytic reduction of hydrogen peroxide (H₂O₂), which leading to an unmediated biosensor for H₂O₂. The electrocatalytic response exhibited a linear dependence on H₂O₂ concentration in a wide range from 3.1 μM to 4.0 mM with a detection limit of 1.2 μM (S/N=3). The designed biosensor exhibited acceptable stability, long‐term life and good reproducibility.     

A novel nitrite sensor based on graphene/polypyrrole/chitosan nanocomposite modified glassy carbon electrode

A novel nitrite sensor was fabricated based on a graphene/polypyrrole/chitosan nanocomposite film modified glassy carbon electrode. The nanocomposite film was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and Raman spectroscopy. The electron transfer behaviour of the modified electrodes was investigated in [Fe(CN)(6)](3-)/(4-) redox probe using cyclic voltammetry and electrochemical impedance spectroscopy. Differential pulse voltammetry and amperometry were used to study the electrochemical properties of the proposed sensor. Under optimum conditions, the sensor exhibited good reproducibility and stability for nitrite determination. Linear response was obtained in the range of 0.5-722 μM with a detection limit of 0.1 μM (S/N = 3) for nitrite determination.